Similar Questions

• Mozilla is aware of the problem with protected in Flash Mode?

  Today I started to have problems to view integrated in Firefox 12 Flash content. I tried all the usual steps (for example to clear cache, disable extensions, update the plugin and then finally of this update to Firefox 13) but nothing worked.

  Then I found an Adobe forum which some contributors have experienced the same thing in the last days, and it seems to have had a problem with the Protected Mode in the latest version of the Flash player. I disabled this mode and everything now works perfectly again - so I thought I would bring it to your attention in case others have the same problem.

  The Adobe support article is here: http://forums.adobe.com/thread/1018071?tstart=0

  Hope you find it useful...

  Thank you, cor - el. Hope there is a fix before long, otherwise it doesn't seem to be that much interest in the application Adobe mode protected in the first place!

• M30X: Problem with standby and hibernation modes

  Hello

  In my M30x, I configured my laptop to Hibernate when near the lid. However, when I turn on the computer after this hibernation, there is a problem with the sound settings - I cannot play any music or cannot use a microphone outside, unless I reboot. If reboot is required, then there is no sense to use this feature of hibernation. Also, sometimes after these Awakenings (turn on after hibernation) my mouse (touchpad) spontaneously turns off. This happens when I plug my pc on TV, then come back and close the cover. There someone experiencing similar problems and can help me? Thanks in advance

  [Edited by: admin on 8 May 05 08:02]

  Hello

  It is not easy to say what can be the cause of this problem. I very often use the hibernation mode and there is no problem that even several applications are open. You have this problem only if the device is connected to the TV or every time after hibernation mode?

  It will also be interesting to know if this occurs after each process of awakening or first several modes of hibernation.

• problems with reading card compact flash

  Hey, I recently bought a mac and I have a problem with she read my cards compact flash. I have a 64 GB scan disk card and a canon 5 d mark II camera.

  I get the error message that disk was bypassed and that the files could not be read. so I can't transfer my photos on my mac. I can, however, transfer them on a pc and then on a usb key that works on my mac. but this isn't the solution. I contacted apple support and was on the phone with them for over an hour and still no solution... who can help me?

  First thing to try is getting the pictures safely out of the map and then using the command format of the camera to erase and reformat - this will usually solve this type of problem

  LN

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Problems with images in offline mode

  Hello, I'm coming back in video editing and I run into some roadblocks frustrating with Adobe Premiere Pro CS4.  I use one, what I discovered for cheap camera, Samsung SMX - F40. IM shooting resolution 'Fine TV', which I believe is 720 x 480.  By trial and error, I think I have a Preset of correct when creating my project sequence, because I successfully under the leadership and downloaded the video on YouTube that was my goal for this project. But he had problems all the time with the video going on offline so I had to re - change a lot.  Revisit the project final file only days laters, it is once more unusable because some clips are again in offline mode.  I try to re - link them, but the files are "format unsupported or damaged."  These are the same files with the same name in the same place that I used to create the video and he suddenly doesn't like them now.
  
  The files are .mp4, I read that this first seems to have problems with.  I used Bigasoft Total Video converter to change my .mp4 in .mp4 I read first would like better. But I still have the same issues. He's not either.
  
  I'm a bit lost and I was wondering if anyone has advice or solutions that could solve my problem.

  Welcome to the forum.

  This ARTICLE is about a bit of Offline media, but with this error message, it looks more like your fully-paid version of CS4 has been bitten with him back to Bug Trail. This has happened to multiple users and is mostly the result of the update of PrPro. A quick check, create a new sequence and see if you still all Presets of HD. It is likely that you do not have. This affects what it is MPEG, so HD or SD and it's just to quickly see what you have available.

  The "fix" is an operation of several stage and in this order:

  1. Disable, if possible (probably not, as the trial is not activated)
  2. Uninstall PrPro
  3. Download and run the Adobe CS5 of Tool Cleaner (latest version) several times, rebooting between each series.
  4. Install PrPro
  5. Immediately upgrade to the latest version before embarking
  6. Launch and test

  Good luck

  Hunt

• Problem with VI in Normal Mode, but not in execution to highlight

  Hi all

  This is my first post in this forum and I hope you can help me. I'm sorry for my bad English, English is not my main language.

  Now to my problem. I did a CNC with Labview machine, the machine has been built with a Lego Mindstorms NXT.

  The VI should read the lines in a text file, which a good movement for engines (G-Code). Mindsotrms LEGO NXT is connected via USB to the PC and the computer races VI target Mode. The VI is made in the 2011 Version of Labview with the Addon of NXT from Lego.

  Now the VI is finished, but he's going to correct work only in the Mode of execution to highlight (but he engines are not sync and his extremely slow). When I try to run the VI in normal mode, the engine for the port B does not work.

  Please can you help me.

  In the attachment, there is the VI (and an example of the G-Code (Code G example of Quadrat) file.

  Thank you very mutch.

  Kind regards

  Alex

  Your control loops seem to run (using all the CPU on the NXT loading) independent and probably cause famine across the loop.

  

  Add a delay here to minimize the problem.

  Not sure if it does help.

  BR,

  / Roger

• Problems with client configuration WRT54GS mode

  Hello

  I have a WRT45GS client mode configuration which connects to a WRT54GS access point, the problem is that when the radio is off it lose its configuration I have to manually repeat the procedure to be customer implemented through site survey.

  Did someone else you have this problem? It is really strange and I need to turn off the radio during the night

  Really thanks

  Just to check, both devices are WRT54GS? You must be referring to access to point to another device, since there is no option of client mode for WRT54GS.

• Problem with javascript in narrative mode

  Hi gurus!

  I'm trying to put conditional logic in a narrative view of my analysis. I found some advice and wrote that:

  < script >

  If ('@ {} {FIN01TIME}'== 'Period')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Fiscal Quarter: [/b]@2 [b] fiscal year: [/b]@3 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]]]")

  }

  If (' @{FIN01TIME} {} '==' quarter ')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Fiscal Quarter: [/b]@2 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]]")

  }

  If ('@ {} {FIN01TIME}'== 'Year')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]")

  }

  < /script >

  Everything works fine, but the problem happens when I "click" on my analysis paging buttons (see attached image: javascript_problem_paging.png). After clicking, it leaves me with a blank page that contains only view narrative. In addition, displays "error on page" message of warning in the status bar (see attached image: javascript_problem_afterclick.png)

  I think that this problem occurs with the "onclick" javascript event. I tried to turn it off, but still does not work.

  Any help will be appreciated.

  Thanks for your time!

  Kind regards

  Fabian

  Hi all!

  I have my own answer, jeje.

  Instead of using "document.write...". "I put another narrative with a view

  control and set its content in "document.getElementById (.). innerHTML = "(le même code HTML)" ""

  It works perfectly! I hope that this achievement will help someone else.

  Kind regards

  Fabian

• Problem with the screen blend mode

  Hello

  I noticed that the screen on my Illlustrator a blend mode problem, he does not let the color when the shape is black...

  Here is a screen for the explanation:

  

  (overlay = screen in french)

  I don't understand what is happening... ID do something wrong?

  EDIT: I use Illustrator CC (2014)

  What document color mode?

  In CMYK mode, you might want to try a (very) rich black.

• Problem with Adobe pdf - A Mode

  We are a company national multi and I noticed that lately when receiving documents by e-mail of the Canada that Adobe told me that I consult documents in Adobe pdf mode-. It is therefore impossible for me to extract or edit documents.  Is it possible to change this mode, or turn it off when I received a document?  Thanks for any help!

  Yes, PDF/A is specifically designed to be final and cannot be changed, so it is not suitable for your needs.

• Problem with the unit (transparent mode)

  I'm under Win 7 x 64 you and Mint as a guest. When I click on 'unity', this is what happens:

  

  As you can see, the "Office" of mint that is supposed to go cover some of my icons of the host and the host Office. I can't move the "Office" of mint, the only thing I can do is click on the 2 icons that it content. Other that that, it seems to work as it should.

  In addition, since I'm here, if she disappeared as it should, how would launch an app of comments?

  Thank you

  I found that I'm not the only one:

  https://communities.VMware.com/message/2304766#2304766

  I'll post here.

  Thank you

• Problem with folder in remote mode

  Ive just set up a new web page that requires the use of a database, so I saved my website under a separate name and tested on MAMP first to ensure that it works all. Then I tried to download this on my Web site, I did this by copying the new (admin) folder and pasted in my site online. I then downloaded and tried opening the page from the online site, but it always open. (See image below). The other thing, I noticed that when I look at my files Panel in "local view" everything looks perfect, but when I look in 'remote display' the admin folder (which holds all new files) does not look right, the file appears as a single file and is empty?

  ```

  Copy the block of code below and insert it directly before the tag as shown below AND REMOVE the other block of php that was throwing an error.

  <>

  $deleteSQL = sprintf ("DELETE FROM donation WHERE dayCreated< date_sub(now(),="" interval="" 1="">

  GetSQLValueString ($_POST ['id'], "int"));

  @mysql_select_db ($database_milesdata, $milesdata);

  $Result1 = mysql_query ($deleteSQL, $milesdata) or die (mysql_error ());

  ?>

  http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.DTD">

• How to identify the current row in the table of selectOneChoice compact mode

  Hello

  I have an af:table in which one of the columns is selectOneChoice in compact mode.  When you select the point in this selectOneChoice, valueChangeListener fires and do some work based on this line.  However, my problem is that it is difficult to identify the current line, because the selectOneChoice is in compact mode.  If the selectOneChoice is not in compact mode, when the user selects an item in selectOnechoice, af selectionListener: table is triggered to identify the current row.  But if selectOneChoice is in compact mode, user has the option to choose from selectOneChoice and valueChangeListener fires before af selectionListener: table is triggered.  Therefore, not able to identify the current row.

  As a workaround is not so perfect, I tried to put the line identifier (in my case it is DetailSeq) in shortDesc and do it from there.  But users complain seeing this not user-friendly in shortDesc/hintText.  I tried to put DetailSeq as the id of the selectOneChoice, but it works not (cannot get the selectOneChoice in the table Id)

  < af:table >

  ....

  < af:column = 'Action' id headerText = "c5" width = "30" >

  < af:selectOneChoice id = "has$ {row.» AutoSubmit DetailSeq}' = 'true' valueChangeListener = "#{viewScope.backing_requestOverview.onSelectAction}" label = "Action" mode = "compact" shortDesc = "#{row." " DetailSeq} ">"

  < f: selectItems value = "#{backing_requestOverview.requestActionsMap [row." StatusUid]}"id ="si333"/ >

  < / af:selectOneChoice >

  < / af:column >

  ....

  < / af:table >

  In the valueChangeListener:

  {} public void onSelectAction (ValueChangeEvent valueChangeEvent)

  RichSelectOneChoice actionChoice = (RichSelectOneChoice) valueChangeEvent.getComponent ();

  LOGGER.info ("Short Desc:" + actionChoice.getShortDesc ());

  LOGGER.info ("Id of the component:" + actionChoice.getId ());

  }

  Any advice?

  Thank you

  -Mina

  Have you tried the setPropertyListener?

  Timo