problem with install two DAQ in a PC and missing DAQ assistant

Similar Questions

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Having a problem with my computer I try to restart and get BSOD saying internal error Planner video background

  Original title: Blue Screen of Death (BSOD)

  Hello im having a problem with my computer I try to reboot and I get BSOD saying internal error Planner video background

  Here is my mini dump file:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4807 & authkey =! AGKWUp-ndI0XBgE & ithint = the file % 2cdmp

  and here is my system info:

  https://onedrive.live.com/redir?RESID=60FEBF11B9A3D76! 4810 & authkey =! AFloWJarqiE83QM & ithint = the file % 2cnfo

  im hoping that this will let you know what is wrong or not

  RW

  This phenomenon was linked to your video driver (atikmpag.sys) /DirectX.  I would completely remove the current driver and install the latest driver available.

• I have a problem with the simulation in Matlab 6.5 and LabVIEW for PID controllers

  I have a problem with the simulation in Matlab 6.5 and LabVIEW. I have a few methods for granting regulators PID in MATLAB to go but not of LabVIEW. Degree of international teams of two transfer but when I passed to the fourth degree is no longer working. We have changed the formula to calculate the parameters for the fourth year and gave me some good values for assignment of Matlab, but when I put on LabVIEW are not resolved. the formulas are available in PDF format and are. Please help me and me someone if possible. Thank you
  Lim.4 generation in comparison methods and the MATLAB program settings are for the service of transfer to the second degree.

  Hello Lascarica,

  I noticed that you are using the screw of PID. Gains on these screws are based on TIME instead of GAIN. You should be able to build a PID regulator and vary the gains and then compare the results.

• Problem with livemail, upgrade Windows 7 to 10 and back again

  Separated from this thread.

  Hello

  Having problem with livemail, improved Windiws 7 to 10 and then uninstalled immediately revert to the original with option to the program (things not working not properly).   All rolled back does OK no message or data errors.

  Now all the direct mail has duplicated, will remove some, but others won't.

  Can you post help or solution, please

  John

  It seems that many of those who go back to Windows 7 from Windows 10 experience a corruption of the store folder (the folder where messages, calendars and the account settings are stored). According to your storage folder is how complex (several accounts, calendars a lot, a lot of messages number of files), it can be simpler to just create a new storage folder and fills again:

  1. Looking at your list of messages in Windows Live Mail, press Ctrl-Shift-O for Options. On the Advanced tab, click Maintenance and then store the file. Copy the path to locate the storage folder.
  2. Close Windows Live Mail and wait a few minutes (the program will continue to run in the background, while he does his household).
  3. Press the Windows key + E to open an Explorer window, and then paste or type the path that you copied to the (1) in the address bar and press ENTER. This should open your storage folder.
  4. Right-click on the name of the folder in the navigation pane, and select Rename. Call the Live Mail Backup.
  5. A repair must check that all the program files are present and correct and properly registered, as appropriate. To do this, close all running programs, and then press Windows key + R, type wlarp and press ENTER. In the window that opens, select repair all Windows Essentials programs:

     
     When it is finished, restart the computer.

  6. Start Windows Live Mail and wait the program installs before doing anything. Press Ctrl-Shift-T to start the add your Assistant e-mail accounts and follow the prompts to add your e-mail accounts.
  7. Click once on the work online on the status bar and deconnecter disconnect Internet to avoid interference email downloads, and then use the file > import messages (I Alt - F) and point the wizard to the Live Mail Backup folder level. Do not intervene while the import happens.
  8. Leave the program alone for a while (an hour or two, or even a night or more) to enable him to reindex all your messages, then close and wait half an hour for the program to do his household.
  9. Relaunch the program and look at your messages under folder imported into storage folders. Take it slow, drag files out of any folder and drop in the location you want. Again, give the program time to re - indexing messages in their new location.

  Note that you can not drag files out of storage files. If you want to forward messages to a high plu account folder in the folders pane, you need to select messages to transfer, and then use the right click > move or copy folder. The controls are also available as buttons in the folders of the Ribbon tab.

• Problem with El Captain (5.1.7 server) and the management of permissions

  Hello world

  I have a big problem with our Mac Mini Server (El Captain) and the server program.

  In recent weeks, the server didn't give the permissions of a folder.

  for example:

  Mr. X had permission to read and write to a folder.
  Mr Y too.

  Mr. X has create a new folder one record something in it.

  Mr Y had the permission to read or write to the folder create Mr. x. But he should have.

  Or

  Mr. X has save a file to a folder

  When he opens it again it is write protected and cannot be replaced.

  So you have to save under a different name in the same folder.

  And every time he save/close the file.

  Anyone know what could be the problem?

  Thank you

  Greetings from the Germany

  Chris

  My guess:

  A few weeks ago someone messed with the permissions on your server and made a mistake. So, you got an inappropriate list ACL (Access Control), which is rampant in the file and must be removed or fixed.

  http://www.TechRepublic.com/blog/Apple-in-the-enterprise/introduction-to-OS-x-AC cess-control-lists-ACL.

  C.

• I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  I am running windows vista and am warned there is a problem with windows media center, restart my computer and try again. It did not work. Help

  Run the Setup again.

  Open WMC > tasks > settings > General > installation Windows Media Center > rerun the installation

  Does that help?

  If the above does not help then try to reset WMC: -.

  Open Control Panel > uninstall a program > turn Windows features on or off > scroll multimedia features > uncheck the box against Windows Media Center > follow the instructions on the screen > Reboot > open again to turn Windows features on or off in the control panel > scroll multimedia features > check the box against Windows Media Center.

  Now reconfigure WMC again

• I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  I have currently problems with control panel Nvidia causing black outs and computer freezing/not not be able to start.

  1) update your nVidia/software drivers to the latest version for your model video card + operating system.

  (2) check that the equipment is not defective.

  This is not a Microsoft / number of the operating system.  For additional troubleshooting - contact the manufacturer (nVidia).

• Problem with Instalation 900 SPA

  Hi all
  I am about to install a new VOIP system in our offices.  We are only a small office, but reasonably busy and I only need three to five extensions.  I already have the material and I'm reasonably confident (famous last words!) by installing the system with a SIP line and connected to a normal telephone line for the downturn.  I'm NOT sure about a field.  Prime material

  SPA9000
  SPA3102
  962/942 SPA phones

  OK now my desktop system consists of a server with SBS2003 with NIC TWO one for LAN and WAN cards.  Workstations and other elements are connected by ethernet to a D Link switch which is connected to the NIC1 and the NIC 2 connects to a telephone line Draytek router/ADSL broadband.  Internet access is of course provided to workstations using DHCP.  Everything works well at the present time.

  Now that I do not understand is the SPA 9000 connectivity and the SPA3102 which has an FXO port to the telephone line.  As I don't have only one telephone line how to connect theat line to the router AND the SPA3102.

  I hope that explains my question

  Thanks for any help

  You will connect the WAN port on the SPA9000 to the switch and then together "Network Interface Proxy" WAN under the label to join automatically, in which case your SBS2003 has no problem handling of multicast SIP, IP of SPA phones. You must manually register the SPA3102 to the SPA9000, you set a proxy which is the IP address of the SPA9000, you can verify that proxy address by clicking on one of the IP phones that automatically, then you put a User ID user defined. You can test if it works by calling locally and User ID on one of the IP phones.

• Problems with the two Flash/Shockwave

  I have problems with both Flash and Shockwave players. I went to the help pages for both of these players and I followed all of the suggestions that they had players not playing not even if they are installed. I have ActiveX enabled in Internet properties, security software is not in any way afilliated with this problem, which leaves me with being puzzled and frustrated. I hope you guys can help out me if possible, anyway. Also, when I try to reinstall Flash and Shockwave, flash "installed successfully" two videos do not appear.
  
  I say well, the possibility of an accidental uninstallment of two plugins not too long could have led to this problem.
  
  Thank you.

  Here is the awnser to your prob... anoying * http://home.att.net/~sjesme/ of hell

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Mid 2007 iMac - problem with install Clean El Capitan

  I have a (very) old mid 2007 iMac that I tried to do a clean install of El Capitan to a USB flash drive.

  I used the following instructions to create a bootable USB El Capitan:

  http://Mashable.com/2015/10/01/clean-install-OS-x-El-Capitan/#5K.kLrHcpEq3

  The USB boot media creation went through without any problems. However, when I try to start the iMac from the drive flash, iMac stays on the screen of the Apple logo for a few minutes and then restarts.

  The iMac was initially Mavericks recovery utility is restarted after I erased the hard drive. To avoid any possible problems with the installer of El Capitan, I used an older DVD of Snow Leopard to remove the Mavericks recovery from disk. The drive is now without an operating system or recovery utilities.

  I suspect a problem with the hardware with the hard drive or flash drive that I use. The hard drive has been erased with a single pass of zeros using disk utility. The flash drive, I regularly use as disk bootable for PC.

  My only other option at this point is to install Snow Leopard, install upgrade to El Capitan, and then use the recovery of El Capitan to do a cleaning.

  I was wondering if anyone else encountered this problem and has a solution.

  Thank you.

  Just to update.

  I decided to take the long road with this to install El Capitan on this iMac.

  Here are the steps I took to install OS x:

  • Wipe all existing partitions on the hard disk, including my former Mavericks recovery partition.
  • Installed Snow Leopard from the installation DVD. Updated Snow Leopard 10.6.8
  • A ran Installer El Capitan
  • Started in the El Capitan recovery utility. I have reset (formatted) the reader.
  • Re-installed El Capitan.

  I could not only solve problems with my key USB install media. It wasn't a complete disaster since I already had existing media that I could use for my iMac back on its feet. My mistake was wipe my existing facility for the Mavericks before check my USB as bootable. Installation took much longer than I anticipated for this reason.

  So, in conclusion, do a clean install on this model iMac is possible, but I highly recommend checking any bootable media before you delete your existing installation of Mac OS. The best route (and easier) is upgrading the OS.