Problem with installing Laserjet P1102W - Ad-Hoc - can't change mode of Communication of Ad Hoc

Similar Questions

• Problem with HP LaserJet P1005

  I have problem to connect my printer (HP LaserJet P1005) to my laptop... after a few tries, I managed to install the software and connect both my devices, but there's another problem is stating that the USB printing support is an older USB device and may not work with USB 3.0... What should I do?... some of my friends said that I need to format my laptop... This question were related to Windows 8?... Please help me...

  Hello

  Please write to us with the following information.

  What is the exact full error message you get associated with USB 2 and USB 3?

  According to the specifications of the HP LaserJet P1005 printer, it supports USB 2.0, please see the link below.

  Printer HP LaserJet P1005 (CB410A) - Specifications and warranty

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/problem-with-HP-LaserJet-P1005/9a1fa919-5db4-44e4-b8ff-15a60f19edf5

  But according to the link below, there is a driver available for Windows 8 and 8.1 of Windows that supports USB 3.0. As a result, the printer should support USB 3.0.

  HP LaserJet P1005 printer drivers

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4131&LC=en&cc=us&DLC=en&sw_lang=&product=3435676

  I suggest you to uninstall and reinstall the latest version of the driver and check if it helps. Follow the steps below to uninstall the printer drivers.

  1. Press the Windows key + X , and then select Device Manager.
  2. You can search the printer adapters and expand it.
  3. Right-click on the printer driver and select Uninstall.

  Once you have successfully uninstalled the driver that you can download the driver from the link given above.

  You can also check out the link below.

  Printers supported for Windows 8 and Windows 8.1

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c03168175&tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4131&product=3435676&sw_lang=#N55333

  Write us to the State of the question, we will help you.

• When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  When starting a warning pops up saying he had problems with the file: XBD EXE that can be done to correct it?

  Hi r13hunter,

  It seems that some programs running on the computer fails to load at startup of the system. Try these steps and check the result.
  Step 1: Find the program that causes this problem and delete or fix
  a. Click Start, type msconfig and press to enter.
  b. click on Startup tab, in the list, search for the path of the xbd.exe file and the associated program.
  c. Once you have found the path of the item and the associated program, repair or reinstall the program.
  See Uninstall or change a program

  Step 2: If the problem persists, perform the clean boot to find this good program that is causing the problem to the system startup
  a. open the article: http://support.microsoft.com/kb/929135
  b. Article, follow "step 1: perform a clean boot" the implementation of these measures will disable all programs not Microsoft currently running on the computer.
  c. restart the computer and check if the problem persists.
  d. If the problem does not persist in the boot, it means that some programs non-Microsoft is the source of the problem.
  e. to find the program that is causing the problem, try "step 2: enable half the services" to "step 6: resolve the problem.
  f. Once you find the culprit, check if there is any updates to update or fixes to the program. If you find, install them and check the difference or reinstall the latest program.
  g. Article, follow "step 7: reset the computer to start as usual.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the evaluation of aci software has problems with net.framework 3.5.1 can I download framework 4 and run at the same time as 3.5.1

  the computer has windows 7 64 bit.

  IPEC software crashes and the error says that it has to do with the 3.5.1

  .NET 3.5 is part of installing win7

  .NET 4 and above is installed via windows update, important updates, and if your windows update is running, would have had to already be installed.

  Installing .net 4 does not .net 3.5

• There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

  There is a problem with my payment information and I can't configure any application I want to remove my information from my icloud account payment

  There are no withdrawal, must be replaced and released.

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  I need to generate 3.3 V logic level Digital train of pulses with the NI PCI-6221. Can I change the level of 6221 OR logic output?

  The output cannot be changed. 5V to 3, 3V level controllers are readily available (Maxim, I think). As long as the scanning speed (etc.) is fast enough for your pulse train, even 3, 3V regulator would work. I don't know if NEITHER offers a module to condition TTL levels.

• All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.

  All my files with the .lnk extension will open with Windows Internet Exploer and I can't change them.
  It's everything that happens anywhere, and I can't change it please help.

  This tutorial should help guide you through this process: http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/

  It's a fairly simple process.

• I have problems with the preview in 2015 - how can I install after effects CC 2014?

  The new RAM Preview asks me questions.  I'm having a time difficult audio synchronization with animation.  It is wrong to my workflow.  How can I reinstall just CC 2014?

  The update of the corrections after effects CC 2015 (13.5.1) is available, which corrects several problems with previews: http://adobe.ly/1Il5JYe

• Problems with the installation of itunes "App can run on pc.

  Hello

  I have a question here

  I would like to install the latest version of itunes on my new PC (windows 10, 64-bit)

  When I click on the application of itunes6464.exe, my pc does not work, it gives an error message:

  "This application can run on your PC. To find a version of your PC, check with the software publisher"

  I tried to install it on my old pc windows 7, it shows me the same error message.

  I made sure to download the 64-bit version

  I tried to download the 32-bit version, it is recognized by my pc and try to install, but watch the message that my pc is 64-bit. What is quite normal.

  Thank you for your help

  If you have trouble downloading the installation file from iTunes to the current address try; Uncheck the box "Keep me updated", empty memory your browser cache, changing the settings of the blocker of pop-up, right click or ctrl - click on the download button, using a different browser, or by using the direct links here.

  See troubleshoot problems with iTunes for Windows updates if you have additional problems at the facility.

  TT2

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Problems with installing drivers

  I have the Bluetake BT007EX bluetooth usb adapter. Pilots who placed on CD is "Toshiba Blutake Stack. I try to upgrade to a newer version in http://aps.toshiba-tro.de/bluetooth/directlink.php?snr=2 version 4.00.36. After the message "Insert the Bluetooth device and click OK" nothing happenes and I wait 10 minutes...
  Device Instance Id VID_0A12 & PID001 and I can not find in the folder with the new drivers inf file containing this Instance ID of device.
  Help me please.

  Usually, if you have no product problem with Toshiba, you check the support page because they have enough experience with own products. In any case, install the USB first and if you are sure that the device is listed in Device Manager and State indicates that this unit can be used, install the BT stack. My friends has produced similar Belkin and it configured on Satellite M40 on this path.

  Have you activated the BT device before installing?

• Problem with installing Rockbox on e250 v01

  Hello

  I want to put a 4 GB MicroSD in my Sansa e250 v01 and I have read, I need to Rockbox, if I want my player to recognize the card. So I downloaded the latest version of Rockbox, copied on my player (directory is called .rockbox) and the problems started:

  (1) Firstly, I tried installing automated, but the Rockbox utility can't find my drive (Windows XP, the drive is named as Sansa e250, but not as a letter, for example E: F:... I tried also with Vista, the same problem occurs).

  (2) then I tried the manual installation, but I have a problem with the installation of the boot loader. I downloaded the sansapatcher.exe, but when I started it, it did not find the player too.

  Can you help me please, I'm doing something wrong? Is there another way to install the bootloader?

  the firmware of the player is the last one: 01.02.24

  Wow, cool, now this market

  Thank you very much!