Problem with IP address lease

Similar Questions

• Intermittent problem with IP addresses and internet connections dropped

  Once a day or so my PC (Win7) will not be able to access the internet. Connection just drops. I use DHCP for IP addresses.

  As far as I can see in the Event Viewer I get these types of errors "the address lease IP 192.168.1.64 for the network card with network 0x406186808C4C address was rejected by the 192.168.0.1 DHCP server (the DHCP server sent a DHCPNACK message)."

  My local network is simply: PC-online router (Cisco E1200)-online internet (modem Siemens SpeedStream 4100 DSL)

  "When this happens, we run ' ipconfig - release 'then' ipconfig - renew." This usually fixes the problem. Sometimes, this does not solve the problem, and we need also the modem power cycle. In a few minutes find us the internet connection. It's nice to have a manual correction, but we want to solve this problem to happen... as is the engine of our family crazy...

  The address LAN IP of the modem is set to 192.168.0.1

  The address LAN IP of the router is set to 192.168.2.1

  When things are running OK, I usually see it in the ' ipconfig-all the ' results: = 192.168.2.147 IPv4 address (Preferred) [but the IP numbers change slightly] my understanding is that see "Present" in the result is a good thing (but I don't know why...).

  Any thoughts on what is happening? and how to permanently solve this problem?

  I'm also confused on IPv4 and IPv6. Should I be concerned with any information of IPv6 in the ipconfig-all the results?

  Thanks for the help

  Talked with the ISP (ATT). Zig - zag, you were on the problem. I had both modem and router set to DHCP mode... so I had some conflicts. The solution was to define the "bridge mode" dsl modem and configure the router to "PPPoE mode. Everything works now. Thanks for your help.

• I can't see a message from my Union because of problems with the address changed for pop-upwindows and some other issues

  Hello
  I am from Sweden and I have problems with a Web site that has my Union. I could see messages from them before, but they changed their address and on the site, they say people that they must put the new address on the approved list of the pop-up windows. I did but it still does not. Maybe I did wrong, I don't know, but it's annoying as hell that I can't see the messages they send.

  I really need help with that.

  Best regards
  Lena

  You can control and manage permissions for all areas on the Subject: authorizations page.

  • https://support.Mozilla.org/KB/how-do-i-manage-website-permissions

  You can delete all data stored in Firefox with a specific area through "Forget this Site" from the context menu of the history entry (see the history or the history sidebar) or via the subject: permissions page.

  Using "Forget this Site" will delete all data stored in Firefox in this area as bookmarks, cookies, words of past, cache, history, and exceptions, so be careful and if you have a password or other data from this area you don't want to lose so take note of these passwords and bookmarks.
  You can't recover from which "forget" unless you have a backup of the affected files.

  It has no lasting effect, so if come back you on such a 'forgotten' site, then the data of this Web site will be saved once more.

• Internal problems with ip addresses from remote desktop.

  I have three servers that I can access via remote destop using public ip addresses, but I can't access it by using the server name or IP private via remote desktop. I can ping both the name and the ip address and nslookup resolves names correctly in the research front and rear. All firewall rules look OK. What can possibly be the problem?

  Hi Ben,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the Forums of Technet Remote Desktop Services.

• problem with wrong address for securityquestion in hotmail

  If the email you and the system wants to send security code is old and I don't have access to it, more... How should I do so?

  Help, please!

  Given that the account of emissions contain confidential information, you must use the below secure support portal. They are the only ones who have access to your account information, we simply don't have.

  
  

  
  

  The forum has Microsoft has been removed and all associated accounts must now wonder online by using the Microsoft online form

  
  Select the error you must help with and fill in the information requested on the next page.  You must be connected to a Microsoft account to access the form.

  If you are unable to access your main account, you can use another account (if you have one) or create a new one https://signup.live.com/
  

• I live in Switzerland, but there is a problem with my address! I can't change from USA to Switzerland! invalid phone ist number from the Switzerland. I would like to book an abo creative cloub!

  Wie kann ich die Adobe Hotline anrufen?

  (800) 585 0774 ist ungultig für die Schweiz

  Hilfe

  Chat support - the link below click the still need help? the option in the blue box below and choose the option to chat...

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )

• Ayuda [problem with email address]

  Cuando abro creative cloud para descargar UN programa envia me a UN correo verificacion a una cuenta Québec are borre as hago

  [Title edited for clarity... MOD]

  A few changes/Verify account https://forums.adobe.com/thread/1465499 links that can help

  -e-mail https://forums.adobe.com/thread/1446019

• Problem with the address of the model

  When I make a change to my model and it ask to update the files, it gives me the following error.

  File access error

  'd:\folder1\name2\var\www\html\templates\main.dwt ':

  incorrect file path (error code 3)

  Well good for sure... that IS a wrong path

  d:\folder1\name2------var\www\html------templates\main.dwt

  the part in bold is my local path and them underlined part my remote path, who properly complete by \templates\main.dwt

  It is logical that this is my local path only d:\folder1\name2\templates\main.dwt but I have no idea where to fix them this at.

  FWIW, when I right click on main.dwt in my components Panel and select new in the same levonorgestrol of error model.  It makes a new file , but like the rest, it does not update when the model is updated.

  Any help?

  Thank you

  Mark

  What are the contents of the path in your site definition fields, please (local and remote)?

• Problems with Firefox 16, no homepage illustrated when starting firefox, bookmarks not shown, slow loading, missing address, without returning during navigation

  I installed firefox on my laptop 16, before that I had version 15 and everything was fine. After insalling the update, some problems came.
  first of all, there is no home page illustrated when I run firefox, although I took in the options

  Second, my bookmarks bar does not appear, I have to disable and enable the toolbar bookmark my wishlist, which is due to every time I close firefox and open it again

  Thirdly, it seems to me that pages load more slowly, each new page needed a few seconds to appear, using 15 version page loading was much faster

  Fourth, it never appears the address of the Web page I'll, he always just says "go to a Web site" is much more difficult to find the address of the site

  Fifthly, when I move from one page to another, I cannot go back but look for the site, for example when I have something to search on google and choose a page to look at, to return to my search results, I have to search again

  I hope that there are solutions for my problems

  Rather than suggest that you reset with 16 of Firefox that wasn't perhaps you could try portable Firefox and use Firefox 16 in this way. Check if it works ok for you. (Portable Firefox installs easily as an additional browser without making a mess of all the other Firefox settings or bookmarks).

  • http://PortableApps.com/apps/Internet/firefox_portable

  I could provide you with an address to download firefox 15 but is probably not better than temporarily using 3.6 Firfeox

  • See install an older version of Firefox (which provides links, he also mentions the ResetFirefox, but I personally would avoid using the reset Firefox feature, unless you have no extensions and no procedure of customization/customizations)

  If Firefox portable 16 work maybe we might consider then get a standard installation of 16 Firefox works fine.

• Problems using Mac Mail with Hotmail address

  I had ZERO problems with Mail and my Hotmail e-mail address for years until Sunday evening. I thought that maybe the Hotmail servers are down and cannot send e-mail that he requested my password, but it says that it was not correct. (but it was) Today I open mail and get the same message and my iPhone was not able to receive mail. After deleting and adding the Hotmail account on my iPhone, it works and receiving mail. On my Mac, it's another story. I removed it without any problems, but when I went back to add an account, it says the account already exists. My Hotmail account is not listed in my internet accounts and not showing is not on my mail. I tried setting up with a fake account and manually enter server information and it STILL says that the account already exists. Is it possible for me to again access my Hotmail on my Mac mail? Thank you!

  After digging around some more to the forums I found my resolution. I had to remove my iCloud account (which uses my hotmail email address) then add my Hotmail email, then add my iCloud account again.

• I have problems with my 7510 holding a wireless ip address 192.168 etc. He said 169. etc.

  My HP Photosmart all-in-one (which is only a few months old) stopped communicating with my router Netgear DGN1000 Adsl a few days before Christmas.

  Instead of the 192.168.0.9 ip address that he used before I turned off the router, ITI is back with an address of 169.254.249.128; 'Source setup' = 'Auto ip "; a subnet mask of 255.255.0.0; and default gateway 0.0.0.0. I know that they are bad, so I tried a fixed ip address to 192.168.0.201, a SM 255.255.255.0; and a DG 192.168.0.1; It was OK, but the next day, returned to the auto ip settings.

  I finally managed to contact HP and the guy spent 75 minutes with me trying to restore things and finally the village that the Netgear router did not have access to the printer via certain ports (which he sent me a list of) and something he said that I had to tell my ISP (Virgin media) "FLOOD DETECTION SET to OFF" & "SP1 FIREWALL SET TO OFF.

  Communicating with VM, they were insistent that their router was not at fault - they could open ports 12 or so, at a cost to me of 60 pounds! (I refused this)

  HP told me how to set up for printing Ad Hoc (bypassing the router), who had worked during our tests.

  VM has been in my settings for the router, via a remote access device and verified a few settings, but the only one, I saw them alter was CH10 CH11 to change.

  I could certainly not the printer to accept the 192.168.1.201 after that anyway.

  As a result, I have reset the network default printers and reconfigure wireless settings. He seemed OK and running on 192.168.0.9

  I have now reset IP address in the manual on the printer, by entering the 192.168.0.9 and 255.255.255.0; and 192.168.0.1;

  Touch wood he delayed for a few days, but I havn't turned off anything (but during the night before it went wrong!)

  I'm not convinced I have a solution here and would welcome any suggestions as to what I can still do it.

  Maybe I already have some, as I "completely uninstalled and reinstalled the software HP7510 on my desktop PC.

  Incidentally, the printer is set up on 3 PCs in the House - a desktop computer under W7 HP 64 bit, a laptop (same model with BONES) and a laptop under W7 HP, but 32-bit computer.

  All were unable to print when I had problems.

  I would appreciate any suggestions for a fix permanat more. (I would have rather found a final breakdown) I have all other routers, I could try, or I could open ports, but my question is - if I had need of these open ports and other settings (detection of flooding etc.) why the work of the printer for the first few weeks I had it implemented, and why turn off the router caused these issues? (Assume that I need in the future - to turn off the router happens)

  Thank you

  Dave

  Hi Dave,.
  
  Great post with good information.
  
  As you mentioned, the printer came back with a style 169.xxx.xxx.xxx IP address. This is normally produced when the device is not able to get a full connection with the router, router it gives an internal IP address.
  
  Normal suggestion when a printer continues to maintain a connection is to assign a static IP address. This is done by using the manual IP functionality, you've talked about using. This locks the device to the network settings, and even when the network is restarted the information is preserved. This should be the solution to the issue.
  
  I hope this helps.

• Problems with different e-mail addresses and the different Apple ID

  Hi, I have some problems with the different Apple ID and e-mail addresses connected to them, and I hope someone can help me in what to do.

  First a primer on my Apple ID

  ***@me.com - it's my account General iCloud (backup, iMessage, Facetime etc.).

  ***@losmail.no - my iTunes/App account (purchase and download music, app, etc..)

  ***@me.com: I have no problem connecting to this account (appleid.apple.com, iCloud.com etc etc..)

  ***@losmail.no: I have no problem connecting to this account in iTunes/App Store. However, I can not connect on appleid.apple.com with this account because he asked me to check the email address. However, this e-mail address use a messaging service that doesn't work anymore, so I can't check it out. Because it is a private messaging service, I want to change the Apple ID on my account @gmail.com.

  I believe, however, that the account @gmail.com has been connected to the account @losmail.no because I received my shopping etc. of my account @losmail.no sent to ***@gmail.com. These recipes also "Apple ID: * @gmail.com. When I connect to the account, however, use ***@losmail.no. However, an I said, I want to log on by using ***@gmail.com.

  What is strange is that in iTunes / App Store, I can connect with ***@gmail.com. However, this is not the same account as ***@losmail.noand previous purchases / comments etc. are not available. It's strange because said revenues (Ref. above).

  An other ting that indicates that the Apple ID where I use ***@losmail.no once was connected to ***@gmail.com, is what happens when I try to log in to ***@gmail.com to appleid.apple.com. Then, I get a message saying that the e-mail address must be verified. I can write the code sent to the ***@gmaiI.com, but it is said then that this e-mail address is already is used by another Apple ID, so it cannot be verified.

  So I guess my question is, basically, how I can change the ID of the ***@losmail.no to ***@gmail.com Apple when I can't access the account losmail, but the appleid.apple.com tells me that I need to check this email address.

  Best regards

  Philippe

  Hi phillla,

  Thanks for all the details with your accounts.

  Can be difficult to have more than one Apple with several e-mails all mixed together.  If an email is used with another Apple ID, for example, that e-mail can be used to create a new Apple ID or rename an old.

  The analysis of what you seem to have however...

  Your purchases are with your *@losmail.no Apple ID, but the emails for this go to your *@gmail.com email address.

  *@gmail.com is the primary e-mail address for your Apple ID *@losmail.no.

  You can connect to iTunes or manage your page ID with *@gmail.com Apple says it's an Apple ID on its own.  As an email address can only be verified for an Apple ID, which means that he must check with your *@losmail.no Apple ID and cannot be verified with *@gmail.com.

  You say you can not connect on appleid.apple.com with *@losmail.no you will need to check the email address.  You have a relief attached to this ID e-mail? This is the email that would be used to recover.   You receive your check or reset email - Apple Support

  Bottom line, you want to change your primary Apple ID but outdated to *@losmail.no to *@gmail.com, you must first rename *@gmail.com to something else and delete this email of all codes from Apple as well.  Then follow the link above to get access to *@losmail.no and control so that you can rename it.

  Best regards.

• El Capitan 10.11.2. The Mac cannot connect to iCloud due to a problem with... (my email address)

  Error message is presented to each start upward:

  This Mac cant connect to iCould due to a problem (my email address)

  Go to System Preferences to fix this problem boxes and offer now or LATER

  I've seen this question discussed in 2014 and 2013 with other versions OX and I tried the advice offered in the discussions, but no fix my problem. To be honest, there seems to be no definitive solution to this earlier era and users reported that the error continued or returned.

  My own system with El Capitan 10.11.2 is up to date and all information appears correctly when I look at about this Mac (I saw a patch on uTube to fix missing serial number), this isn't the problem I have.

  By clicking on the box now offered as gifts to mistake getting me to System Prefs. I see nothing wrong. I have just to enter my normal password and continue during the day.

  My work of iPad and iPhone without this hitch.

  Nothing has changed for me or my game to the top.

  My apple ID use a gmail address.

  Addresses email on my system are verified. None have been changed, and all have been present on the mac without problem for more than three years.

  I tried to uncheck boxes and Reselection of them...

  There is an option of the discussed here earlier hotfixes that are users running OSX Yosemite and Mavericks, and that I have not tried is to remove the iCloud account. If I do this or even sign out I'm warned that to do so, will remove all documents stored in iCloud this Mac... it feels drastic and I'm afraid of what I might lose and kind of done use iCloud as a storage solution (that I pay for) useless.

  Anyone know why this is happening and a step by step solution that will work without me having to take stupid with my data risks please?

  Thank you.

  Have you tried talking to your national security people Apple?

  Contact Apple for assistance with the security of the Apple ID - Apple Support accounts

• SMTP problem with the recipient's address

  Hi, I made a copy of the function of SMTP Email message send to use it with another port smtp (as 587). Everything works well when the recipient's address is like [email protected] or any what normal address. The problem is when I'm trying to use this function to send an e-mail to an address like [email protected]. Each email to the address of the company is like the second example. Does anyone have an idea to solve this problem?

  I had the same problem with my mail server @msu.edu.

  The problem is that many companies use TLS or SSL security settings.

  There are ways around this problem.

  I have attached a VI that should work for you.

  I can't take credit for the VI, it was given to me by a person on the forums.

  I've just modified it a bit.

  Edit: If you look at the block diagram, upward, there is a node to invoke.

  It's for "SMTP Client", and the element is "host".
  You will need to change that to 'mail.msu.edu' to any server used by your company.

  And you may need to change the port as well.

  I also customized the VI icon, but you can leave if you like it

• Problems with Outlook Express (address book, mail open, etc.)

  Hi, I have a strange problem with my outlook express. The program opens ok, it synchronize the e-mail with the servers and so on. If you click on an email in the upper part of the window you can see the content below.
  Now, this is my problem, I can not doubleclick on an email to open it, I can't send an email or forward it. I can't open the address book.
  I get different messages, "it was not possible to open the address book, it cannot be installed correctly", "the message could not be opened, an error has occurred", "it was not possible to load the due address book that Outlook Express is not properly configured. Reinstall Outlook Express"and so on.
  I used this software for many years and the problem came from one day to the other. I tried to uninstall/reinstall the program from the Control Panel, I did a repair on XP installation, but it is always the same, is there anyone who has an idea (I know that Outlook Express is and old program, but it works very well for my needs).

  What about Nils

  First, try a new identity and see if that helps.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit:
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  **************

  If the problem persists, start looking here.

  All of these errors have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen MS - MVP [Mail]