Problem with KB3167685 on 2012 RDS - IE 10 Server freezes

Similar Questions

• There might be a problem with the configuration of your DOMAIN NAME SERVER

  Last week one, I noticed some problems with my internet connection. I have a BSNL broadband connection. I am connected to the internet, and after some time all of a sudden, I'm not able to connect. My modem lights are all on and on my laptop, I see the symbol of 2 computers with a note on it, which means that I'm connected. But still the pages not displayed. When I run Network Diagnostics (I Windown Vista) I get the error message saying: "there could be a problem with the configuration of your DOMAIN NAME server. I turned off the computer and the modem and switch it on after a long time... He would return but loses the connection with the same error message again. What can I do? I tried to reset the modem, also tried the system restore. What can I do? Please help me. I have laptop Dell Insipiron with Windows Vista and I connect wireless.

  We do not know how your system should be set up - including the DNS configuration and settings.  I recommend you contact your ISP's technical support group and get help from them in the configuration of your computer (and test lines and modem - the problem could be the modem and not on the computer or it could even be the service provider itself).  It can be something as simple as a typo or a box checked or not checked - I do not know because I do not know their settings (different for each access provider).  Give them a call.  I do so often when I have connection problems, and they are almost always useful, or schedule a service call if they cannot help.  I think it's your best chance to solve this problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• Problems with the world of warcraft: lk! Computer freezes is.

  Okay, since I instaled vista/win7, I have the same problem: so I open my wow, my pc just freeze and I need to restart it with the button restart. I almost tried everything: compatibility mode / updated/updated directx drivers / moved my wow folder in the other place.
  I have two ways: to install win xp as second victory, or try the virtual Xp mode (but it seems that this does not work on my pc).
  What are your suggestions, because I'm not the only one who have this kind of problem.

  Hi Klounas8,

  Looks to the event log that you have published, your firmware needs to be updated.

  "Level: error".
  Description:
  Management features power performance CPU 0 in group 0 are disabled due to a firmware problem. Check with the manufacturer of the computer for firmware updated. »

  You will need to go to your computer manufacturer's website to get the latest updates of firmware for your machine.

  I hope this helps! Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Problems with having a Remote Host for the server vCenter Server vSphere?

  Hello

  We have a single vSphere Host located in the United Kingdom and a host vSphere cluster type 3 in France. I plan to add the vSphere Host UK to the France of vCenter Server.

  Does anyone know of any problem with the addition of a vSphere Host of a vCenter Server that is in a remote site rather than on the local network?

  See you soon

  Vince

  I put my vCenter without problems. Just keep in mind not to create a cluster with 2 teams who are on different nodes. Only you can manage the remote ESX host

• Problem with the search service on a Windows Server 2012 R2

  Hi all

  I'm having problems setting up my newly installed Server vCenter server.

  Everything seems to be installed properly, at least I got no error message and I am able to connect to the Web Client vSphere.

  However, I can't create a data center as the inventory does not display any server...

  Weird, isn't it?

  When I try to access to the https://localhost:7444 / lookupservice page, a message tells me that the service is not available.

  Is there something else to do here?

  Something else weird to me, a beginner in VMWare environments, is that although I'm loging as administrator, it seems that I have not at all privilege. For example, for roles see, access to licenses and so on.

  How I setting a user administrator 'real '?

  Do you think that my problem might be this question of privilege? And that I do not see any server in the inventory because my administrator user does not have the appropriate rights to view it?

  
  

  
  

  Thanks in advance for any help you can provide.

  
  

  Kind regards

  
  

  Jeremy

  OK Guyz... My bad.

  Actually, I connect with the user local administrator instead of the user [email protected].

  Now everything seems fine.

  Sorry for the inconvenience! ;-)

  Jeremy

• problems with macbook pro 2012 since update to El captain

  Since the update of my Macbook for the El Captain my package from Microsoft to Apple does not work... Constantly freezes, closes its doors and can not copy and paste charts from Excel to Word... Only started happening since this update.

  I use my Macbook to my work and now can't use it at all... Called Apple who gave me a screen solution brief my graphs for Excel in word, but since then the problem has been a lot of shooting worse is constantly close word and gel...

  If you can open Word or another Microsoft application, select help > check for updates

  This ensures that your Microsoft software is as up-to-date as possible.

  If you can not follow the steps above, you can manually check for updates by opening the Microsoft AutoUpdate tool.

  Click Finder in the dock, and then click go > go to folder. Copy and paste the following text, and then press Go

  / Library/Application Support/Microsoft/MAU2.0/

  Assuming that all your files are where they should be, this will take you directly to the update.

  Good luck

• Windows vista and the problem with the window updates more computer or mouse freezes

  I have window vista system.

  Impossible to update versions of window

  mouse/computer frequent freezing problem

  have installed McAfee total protection

  Hi DilipAssar,

  ·         What happens when you try to run windows update?

  ·         You receive an error message/code?

  ·         Did you the latest changes on the computer?

  ·         How long have you been experiencing this problem?

  ·         What exactly is the computer or the mouse gel?

  Search for the error message for the updates that have failed to be updated.

  To check the update fails, follow the steps:

  Click Start > all programs > windows update > view update history

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Put the computer in a clean boot State before proceeding with the installation of windows update.

  Note: After installing windows update, follow step 7 in the link provided to return the computer to a Normal startupmode.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Reset the Windows Update components.

  http://support.Microsoft.com/kb/971058

  You can also manually install the update (numbers KB) by downloading from the Microsoft Download Center.

  http://www.Microsoft.com/downloads/en/default.aspx

  Reference: http://windows.microsoft.com/en-US/windows-vista/Ways-to-improve-your-computers-performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

• Problem with Visual Studio 2010, c# and SQL Server

  Several years ago, I programmed in Fortran. In order to get my stack of punch cards to run, I needed a couple of cards that said to the central computer what to do; It was very difficult to get this information as if it were some sort of secret. Today, I am using Visual Studio 2010, and programming in c#. It seems to work OK, but when I try to create a situation of SQL, I find that Windows authentication does not work; If I connect as long as administrator, I can see the database administrator; If I sign my name, I don't see a database created under my name, so that Windows authentication does not work. It seems that I need to know this little piece of information that nobody wants to tell me. I would like to work with an application that I'm developing, but if I can't trust him, I can't use it. I need seamless connections and unequivocal. Help!

  Hello

  It is not a community forum for Visual Studio.

  Try the Visual Studio forums.

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio

  Don

• Problem with subscribing to a single node through Server API

  Hello

  I use your <>- server API to subscribe to a node in the collection.  I want only the updates for a particular node, so I'm including that in the call to subscribeCollection.  However, I unexpectedly get updates for all other nodes in the node collection.

  My call looks like this (in Ruby):

  am.subscribeCollection ("'room', 'UserManager', ' UserList")

  In the low-COST airlines server code, this translates a URL that includes the following in the query string:

  ... & collection = UserManager & node = UserList...

  My questions are:

  (1) just to double check, is the 'node' the correct parameter on the query string? (I wanted to just make sure that it isn't something like "nodeNames" instead since that is what is used in the ActionScript API).

  (2) is there anything else I need to do to receive only UserList updated and does not receive many updates for all other nodes in the UserManager?

  Thank you.  Kind regards

  -Trace

  To subscribe to a single node is currently not implemented in the back. The language he exhibited at the front end, but the value is ignored.

  I suggest that you extend your "receiver" class to ignore the values of the nodes, you don't care.

• Serious problems with the 6.16 update: reboot page &amp; chat

  First of all, I want to mention before, if there is no problem with Skype, it would make my computer all freeze where I by force to restart my system. If she didn't answer I could not force the program to close and would be forced to stop and start again.

  An hour or two there is something like it happened and so I restart my computer. Restart Skype updated during this time. When he came I went to my main group chat and it froze my computer, forcing me to do a hard cock down. For the next couple hours, it's the same thing. Even when I tried to disable my internet so I couldn't even open Skype. It is only now, 4 hours later that I am able to access Skype and the rest of the features on my computer, something I wasn't able to do.

  With this update, the display for the bubbles of text is not something I like. Timestamps are gone even if I still have the box checked to have these timestamps. I can't scroll to see previous messages and certain user setting have been forgotten or reset. I'm not happy about all of this change suddenly that I'm already rather on the fence with how much I love Skype.

  I'd like a way to return to the old interfaces without suffering a decline in quality with calls and video.

  The cat new UI is provided with the 6.16.64.105 version only. You can uninstall this 'special' version and install the 6.16.0.105 version with the old chat UI window.

  http://download.Skype.com/MSI/SkypeSetup_6.16.0.105.msi

• Problem with Nightowldvr. Get the error message 'Connect server out of time'.

  Problem with Nightowldvr cannot connect to the mail server

  I install Nightowldvr and he'll send automated E-mail messages, but it stops the error message "server connection out of time", using the SMTP format

  Bill

  Contact the Nightowldvr support.

• Ent of Windows 7. Apart from 2012 - Windows cannot access \\server\share$

  I have a treatment of strange problem with part of 2012 R2.  We have a lab with 30 workstations Windows 7 Enterprise.  They all have the same office via a redirection of folder GPO applied to a share on the server of 2012 R2 mentioned above.  All but 4 of them can connect and pull on the desktop the appropriate shortcuts, network folders, etc.

  The share permissions so no denies explicit.  In an effort to solve this problem, I added everyone and authenticated users, with read permissions on top of the appropriate ad group object that already had read permissions and, of course, SYSTEM and with full control Domain Admins.  NTFS permissions have, of course, CREATOR OWNER, SYSTEM and with full control Domain Admins.  Also, the appropriate ad group has read permissions.  No NTFS clear or rejects the request.

  Using the same account that belongs to the appropriate group or my domain administrator account (which has no office redirected) I can connect to all the workstations and all, but the four mentioned above get the redirected folder desktop.  When I authenticate my account with DA and try to connect to the share on these four computers I get the same error to the user:

  Network error

  Windows cannot access \\SERVER\Share$

  You are not allowed to access \\SERVER\Share$.  Contact your network administrator to request access.

  I think we've all seen this error before.  But I only saw him associated with NTFS permission issues or sharing.  Frankly I'm perplexed.  Any ideas on what's going on?

  Edited to add: I don't think it's a problem with sharing.  Clearly, it's a matter of workstation since 26 of 30 machines Win 7 can be connected without difficulty.  And I don't think it's a matter of profile either since I've never authenticated on these workstations with my domain account.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Problems with migration from LabVIEW 2012 VBAI 2012.

  Hello.

  Someone had problems with the migration of the VBAI 2012, 2012 to labview?
  I'm filing this disadvantage when use migration in VBAI everything works fine, when I use LabVIEW with 'Vision Acquisition Express' for example, everything works as it should.
   
  The solution I've done has been to work with the control VBAI API and it worked perfectly, but I wonder, if a bug or a known error on this process.

  Thank you.

  Finally, I solved it by installing the "Vision Development Module 2012 SP1". With this update worked correctly migration.

• Windows Server 2012 Foundation and SMB problems with older equipment

  Hello

  My problem would be resolved if I had Windows Server R2 2012 but I have Windows Server 2012 Foundation.

  This article describes the problem exactly: https://support.microsoft.com/en-us/kb/2896636

  But of course, the solution does work with my version of the server.

  Does anyone know if there is a similar fix available?  I got my hunting.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it