Problems with the world of warcraft: lk! Computer freezes is.

Similar Questions

• audio device / I have a problem with the audio device from my computer

  No puedo playsecure musica in mi equipo nor any type of audio creo what must an audio to a problema con el device of

  I can´t listen to music or any audio on my computer. He said that there is a problem with the audio device... I Don t know that I have to do!
  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• A problem with the hard drive of your computer

  Windows is not able to open a file on the hard drive of your computer. This could be a temporary condition that may disappear after you restart your computer, or it could be a more serious problem with your drive hard or its driver. I tried to restart my computer, I ran the hard drive error checking, nothing seems to help. Please advise?

  Hello

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• Problem with the IP vs network Hotsync computer name

  Hello-

  I have a TX, a Windows XP workstation and a wireless router.  I play successfully hotsyncs network via WiFi.  A snag, however:

  My workstation is configured with a static IP address.  In the TX Hotsync page, I can use the drop-down list for 'Select PC' and manually enter the IP address.  HotSync will work.  However, on the next go-around, I see that the IP in the drop-down list box HotSync has been replaced with the name of the computer to my workstation.  If I try to hotsync with it, I can not connect.  So I once again 'Select PC' and manually enter the IP address... and it works.  The problem is: I have to manually enter the IP address whenever I want to hotsync.

  Is there something I need to change so that the TX will find my workstation by using the name of the computer instead of the IP address, so I can just click on the button and go?

  Thank you!

  Well Yes, strange...

  Thank you.  Everything you mentioned had been done and already checked.  As I have noted, I have HotSync successfully through the IP address.

  Anyway, the next thing I did was to set the TX for static IP address.  That did not help.

  I read that the computer names are handled via NetBIOS and NetBIOS is often blocked by the default firewall.  I went to F-Secure and added about five rules to allow TCP traffic and WINS over TCP and UDP, specifically for static IP of the TX.  Voila... I have hotsync using the name of the computer.

  Now, it happens by a stranger...

  I started to remove the rules one by one, to see which actually caused to work properly.  Funny, it is... I removed - all - of the rules - and it still works.  Even after rebooting several times throughout the process.

  Then maybe some settings in F-Secure is a not 'paste' originally, and after going through the process and all still rested back upward.

  I don't know, but I'm happy now.  ^_^

  See you soon!

  Message relates to: Palm TX

• I'm having a problem with the file type on my computer, can anyone help?

  I cling to the top of my web cam and when I checked to see if she was at work, he asked how to open the file, so I chose the media player. Then I noticed that all the icons on my desk were ready to open in media player so now I can't open the program ect. because the Media Player tries to open, how can I reset them how they had?
  I tried sys. Restore to before that I installed the cam and it said that there is an error and the file have not been changed. I searched on the net and everything that has been said has not worked.
  Can anyone help?

  Difficulties of file Association - http://www.winhelponline.com/articles/105/1/
  Types of files - a utility to unassociate file types - http://tinyurl.com/2ssrlj MS - MVP - Elephant Boy computers - Don ' t Panic!

• Computer hard locks after the notation in the world of Warcraft character select screen

  My computer hard locks after installing the new patch for world of warcraft. I followed all the steps to address this problem with undesirable results. I have reinstalled the world of warcraft, patched successfully, but when connecting, I hard-lock and need to restart my computer. For this reason, I have to start in safe mode because my computer does not start normally after this anomaly. Since then, I tried to reinstall windows 7, but I can't the GUI to load.

  My hard drive has been compromised?

  I followed literally ALL the solutions that made me Blizzard technical support forums. How bout a solution to the problem that seems to be widespread?

  Hello

  ·        What are the steps that you took form of Blizzard Technical Support forums?

  Follow the steps mentioned below.

  Method 1:

  It may be that some third-party software is causing this problem. Perform a clean boot and see if the problem is resolved.

  If you can boot in safe mode, then I suggest you perform a clean boot.

  1. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility.

  2. on the general tab click Selective startup , and then click to clear the check box loadstartup items. (The check box use the file Boot is not available.)

  3. on the Services tab, click to select the hide all Microsoft services check box, and then click disable all

  Note: Following this step lets services Microsoft continue to run. These services include networking, Plug-and-Play, record of events, error reporting, and other services. If you disable these services, you can permanently delete all restore points. Do not do this if you want to use to restore the system with the existing restore points.

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start, type msconfig.exe in the Start Search box and press ENTER.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart

  For more information, see the article mentioned below.

  http://support.Microsoft.com/kb/929135

  Contact the game manufacturer for further support.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with the HP Deskjet2545 do not print on the computer.

  Printer does not print. Computer says "printer error". Convenience store said that the problem is resolved. The printer is 'ready' doesnot even impression. What is the solution?

  Original title: hpDeskjet2545.

  Hi Matt,

  Thanks for posting your query in the Microsoft Community.

  Printers to print documents, photos, cards and calendars. You have a problem with the printer doesn't work is not on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) what is the exact error message?

  (2) have you tried the troubleshooting steps?

  (3) what is the version of Windows installed on the computer?

  (4) have you made changes on the computer before the show?

  I would like more information about the issue.

  Note: assuming that you are running Windows 7, I would like to suggest some troubleshooting steps.

  Method 1-

  I would have you look at the article-

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Method 2-

  I wish that you uninstall and reinstall the printer.

  See the article-

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 3-

  I would have you go through the troubleshooting proposed by HP guide.

  Check out the link-

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=solveCategory&LC=en&DLC=en&cc=us&product=3571292

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• Problem open attachments in Windows Live Mail "there was a problem with the service Windows Live Hotmail (a matter of temporary network conectivity has nothing to do with your computer)".

  Hello

  In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »

  Please let me know if I have a problem with my email account.

  Hello

  You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.

  In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.

• Problems with the blue screen of death (when my computer is shut down)

  I get a blue screen of death on occasion, when shutting down my computer (Windows XP, Dell Vostro). It started happening after I installed the latest version of the Synology NAS software. This is the message: BCCode: 100000d 1 BCP1: BA3F1F20 BCP2: 00000002 BCP3: 00000008 BCP4: BA3F1F20 OSVer: 5_1_2600 SP: 3_0 product: 256_1. Additional technical information: C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\Mini021112-01.dmp and C:\DOCUME~1\admin\LOCALS~1\Temp\WER4098.dir00\sysdata.xml.

  Not sure if it is related to the installation or if it is another problem. Any advice would be appreciated.

  The minidump file showed a DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) referencing the usbccgp.sys (common class generic Parent Driver USB):

  BUCKET_ID: 0xD1_CODE_AV_BAD_IP_usbccgp+ 1f20

  The spoolsv.exe (print spooler service) is the process that crashed.

  You have recently installed a USB printer?

  In any case there may be a problem with the USB stack in Windows XP Service Pack 3 so I recommend you to install the following fix can correct a problem of 'timing' of USB that can be useful for the error you receive:

  http://support.Microsoft.com/kb/969238

  There is a link at the top of the article to request the hotfix.

  There was a driver of Synology (busenum.sys) loaded during the crash, but it does not appear to be involved in the accident.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

• There was a problem with the Windows Live Hotmail service (a network connectivity problem temporary has nothing to do with your computer).

  There was a problem with the Hotmail service (a network connectivity problem temporary has nothing to do with your computer). Please try again

  . I really need to fix this! Help!
  original title: no answer not before!

  track every step!

  no change!

  I am getting really worried about it!

  Please ask in the forum Hotmail. We do not use it. We cannot answer your question.

  Windows Live Solution Center Hotmail Forum
  http://windowslivehelp.com/forums.aspx?ProductID=1

• Wiped a computer due to problems with the operating system, but do not have any media to reinstall. Help.

  No operating system

  Hello

  I bought a second hand computer and there is no backup of the operating system CD. He had problems with the operating system start so I wiped it, but now I have to re - install.

  Would it not possible to obtain another copy of the operating system for that computer?

  All the best

  Dean

  Hello

  These are forums for Vista, so vista information is provided

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer

  Original title: speaker FOR desktop

  In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack.    The device is installed REALTek.   When I play songs or video, he said: -.

  "Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.

  How to solve this problem.

  Hello

  I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.

  I would like to know some information:

  1. Have you tried to plug any other speakers or headphones?

  2. You did changes to the hardware/software before this problem?

  3. Have you tried using these speakers with another PC?

  Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-Media-Player-cannot-play-the-file-because/7faf6bdb-6a4e-4B5B-b5a9-2119907d953e

  Hope this information helps.

  Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.

  Please get back to us with an update on the issue, we will be happy to help you.

• I keep having problems with my server DNS does not. Computer Blu - Ray player and wireless both have problems with the connection.

  I have problems with the server DNS does not.  I have been using my wireless on my computer and watching netflix on my Blu - ray player at the same time.  The Blu - Ray player froze and wouldn't connect.  At first, I thought that the network has not been configured correctly, but it worked not five minutes before.  I tried many things and I realized it was that my DNS server does not.  Does anyone have any suggestions?

  original title: DNS server does not

  Hi Dwright,

  1. have you made changes on the computer recently?
  2. not the problem only occurs when you watch netflix on Blu - Ray player?

  Method 1
  I suggest you try the steps from the following link to fix the server DNS does not problem.
  a. click on start and then Control Panel.
  b. go to the networking and sharing Center and then click on change adapter settings.
  c. right-click on connection to the Local network and select Properties.
  d. Select Internet Protocol Version 6, and then click Properties.
  e. Select obtain DNS server automatically an address and press Ok.
  f. Select obtain IP address automatically.
  g. Repeat steps for Internet Protocol version 4 as well.

  Method 2
  Try resetting Winsock2 from the following link:

  How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista (applies to Windows 7)
  http://support.Microsoft.com/kb/811259

  Method 3
  Reset TCP\IP.
  How to reset the Internet Protocol (TCP/IP) (applies to Windows 7)
  http://support.Microsoft.com/kb/299357

  Additional information:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

• Problem with the video on the computer.

  Hi, my computer suddenly become glitchy and started screen tearing up about 20 minutes ago.

  I did a survey and found a dmp file that I believe is associated with the problem.

  This problem has never happened before, but I want to fix any damage in the future.

  Online Crash Analysis snapshot, presented by the OSR Open Systems Resources, Inc.. Primary analysis

  Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
  Online Crash Dump Analysis Service
  See http://www.osronline.com for more information
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
  Product: WinNt, suite: TerminalServer SingleUserTS Personal
  Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
  Machine Name:
  Kernel base = 0xfffff800`03063000 PsLoadedModuleList = 0xfffff800`032a6890
  Debug session time: Fri Sep 19 22:41:44.936 2014 (UTC - 4:00)
  System Uptime: 1 days 0:59:18.919
  *******************************************************************************
  *                                                                             *
  *                        Bugcheck Analysis                                    *
  *                                                                             *
  *******************************************************************************
  
  VIDEO_TDR_TIMEOUT_DETECTED (117)
  The display driver failed to respond in timely fashion.
  (This code can never be used for real bugcheck).
  Arguments:
  Arg1: fffffa8016a72010, Optional pointer to internal TDR recovery context (TDR_RECOVERY_CONTEXT).
  Arg2: fffff8800ff9e5c8, The pointer into responsible device driver module (e.g owner tag).
  Arg3: 0000000000000000, The secondary driver specific bucketing key.
  Arg4: 0000000000000000, Optional internal context dependent data.
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  FAULTING_IP:
  nvlddmkm+1575c8
  fffff880`0ff9e5c8 ??              ???
  
  DEFAULT_BUCKET_ID:  GRAPHICS_DRIVER_TDR_TIMEOUT
  
  TAG_NOT_DEFINED_202b:  *** Unknown TAG in analysis list 202b
  
  BUGCHECK_STR:  0x117
  
  PROCESS_NAME:  System
  
  CURRENT_IRQL:  0
  
  STACK_TEXT:
  fffff880`0272e4f0 fffff880`0fd5a72b : fffffa80`16a72010 fffff880`0fda709b fffffa80`16a72010 fffff880`0fd28843 : watchdog!WdDbgReportRecreate+0xa3
  fffff880`0272ea10 fffff880`0fd5b3f0 : fffff8a0`11e66e90 fffff8a0`11e66e90 00000000`00000080 fffffa80`16a72010 : dxgkrnl!TdrUpdateDbgReport+0xcb
  fffff880`0272ea60 fffff880`0fd2f6b3 : 00000000`00000001 fffffa80`11fc9000 00000000`00000000 fffff880`0000009f : dxgkrnl!TdrCollectDbgInfoStage2+0x220
  fffff880`0272ea90 fffff880`0fd5bf43 : fffffa80`1191ea58 ffffffff`fffe7960 fffffa80`16a72010 00000000`00000000 : dxgkrnl!DXGADAPTER::Reset+0xef
  fffff880`0272eb40 fffff880`0f03803d : fffffa80`12608d50 00000000`00000080 00000000`00000000 fffffa80`1191e410 : dxgkrnl!TdrResetFromTimeout+0x23
  fffff880`0272ebc0 fffff800`0337473a : fffffa80`120a3ca0 fffffa80`1617cb50 fffffa80`0ca8c5f0 fffff880`0272ecd8 : dxgmms1!VidSchiWorkerThread+0x101
  fffff880`0272ec00 fffff800`030c98e6 : fffff880`03102180 fffffa80`1617cb50 fffff880`0310d0c0 fffff880`010b17e7 : nt!PspSystemThreadStartup+0x5a
  fffff880`0272ec40 00000000`00000000 : fffff880`0272f000 fffff880`02729000 fffff880`0781fd40 00000000`00000000 : nt!KxStartSystemThread+0x16
  
  STACK_COMMAND:  .bugcheck ; kb
  
  FOLLOWUP_IP:
  nvlddmkm+1575c8
  fffff880`0ff9e5c8 ??              ???
  
  SYMBOL_NAME:  nvlddmkm+1575c8
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: nvlddmkm
  
  IMAGE_NAME:  nvlddmkm.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  5414a236
  
  FAILURE_BUCKET_ID:  X64_0x117_IMAGE_nvlddmkm.sys
  
  BUCKET_ID:  X64_0x117_IMAGE_nvlddmkm.sys
  
  Followup: MachineOwner
  ---------
  

  This free analysis is provided by the OSR Open Systems Resources, Inc..
  You want a better understanding of the analysis of crash dump? Discover our kernel Crash Dump Analysis and Windows debugging

  Hi Summet

  Problem with the NVIDIA graphics driver

  Please visit the NVIDIA site and install the video driver

  Choose your graphic card model and download it and install it, I m Sure/Hope that will solve the problem