Problem with Latitude E7440, dock E-series & external monitors

Similar Questions

• Triple monitors with Thinkpad Mini Dock Plus Series 3 T520

  Hello

  I have Lenovo T520 with home Mini Dock Plus Series 3 station.

  I would like to connect three monitors, that is, two dviports and thirdly, one is the T520 monitor.

  I updated my video driver for Interl (R) Graphics 3000 Driver.

  When I try to run the NVIDIA Graphicdriver, I got a message error "the graphics driver is not compatible with the graphics hardware. I tried to find a solution on Lenovo forum

  http://forums.Lenovo.com/T5/options-Accessories/mini-dock-plus-series-3-with-triple-monitors/TD-p/57...

  It says that I need to enable Optimus in the system.

  I can't understand what he found where I can activate Optimus?

  You guys have any suggestions as to how I can put it up using two DVI ports instead of use the vga?

  Kind regards

  Thank you all guys.

  While constantly looking for a solution to extend the number of monitor. I managed to find a solution. Today, I had "I - TEC USB 2.0 graphics video card" and he connected with one of the USB port. It works very well and I am also pleased with the video quality. I can separately used the third monitor. It is also possible to share the display between the second and the third screen.

  Concerning

• Resolution with HP2311x and HP ProBook6455b series laptop monitor configuration problem

  Hello

  I have a problem-solving with portable HP2311x and ProBook6455b.

  Maximum resolution is 1024 x 768

  Current display driver is ATI Mobility Radeon HD 4200

  However, my HP monitor supports the 1920 X 1080.

  I used only the external monitor without using the laptop monitor and the maximum resolution is always 1024 x 768.

  I also downloaded the drivers recommended by HP, but it does not solve the issue.

  I also tried with the drivers provided by AMD, but I get still more low resolution (1280 x 768) because the driver software detects is ATI Mobility Radeon HD 4250

  When I try to use the AMD Vision Engine Control Center stops unexpectedly

  I have conteacted
  Portrait Displays, Inc..
  http://support.portrait.com

  But they suggested me to contact HP because they were not able to solve my problem.

  Any help will be appreciated.

  Kind regards.

  1. number and product name
  • HP ProBook 6455 b and HP 2311 x

  2 operating system installed (if applicable)
  • Windows 7 64 bit

  3. error message (if any)
  • No error message

  4. all changes made to your system until the problem occurred
  • No change

  Hello antgfig,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

  Good luck!

• Problem with the PC Backup on the external DRIVE on the network drive home.

  I made backups of my laptop wirelessly through my router to my connecting external hard drive attached to my desktop, when I used Microsoft OneCare. Since then, OneCare is being abandoned, I decided to go to the basics of Microsoft (MS). Unfortunately, Ms Essentials doesn't have the features of OneCare. I try to perform a backup using the backup and Restore Center, however, I get an error message when I put backup settings to location network - error code: 0 x 80070534, no mapping between account names and security IDS was done... the results. Is there a KB or a fix for this problem? I've looked everywhere for answers and keep looking, however, I have found no solid solution (especially scams, i.e. pc scanners and fixers of registry error). How is it that I could make a backup without problem with OneCare (that I have no more:{{class=fontblue}} {.}) Now I try to do through the Center backup and restore, the backup does not work! It makes no sense at all!  I have Windows OS: Vista Home Premium 32-bit 2 Gb RAM SP2; HARD drive external: Maxtor 3200 (320Gb) hdd personal

  Thanks, I found the problem. I had to uncheck the ReadOnly property on the folder that I traced to use for my backup location on my HARD drive. In truth, the property read-only (checkbox) is not checked, it is filled (designates the system setting) with a green square in the box (on my Windows XP desktop). I'm sure that others have missed this little nuisance. It's cheating. I don't know how many times I looked at the folder that I use for my backups, forget to realize that the ReadOnly is the default setting for the file. I no longer get the error message: 0 x 80070534, no mapping between account names and security IDS was done. I can't believe it's just as simple as that! My backups work fine.

  Karena, R, thank you for your time and help in any way.

• Graphics problems with Latitude E550

  Hello

  I have a problem with a laptop computer latitude and native resolutions.

  I currently have 2 Latitude E5550.

  It has a native resolution of 1920 x 1080 (read in the bios) and the other has a native resolution of 1366 x 768.

  The same drivers (Intel HD graphics 5000 I believe. Video bios 1032v17). Same bios versions. As well on Windows 7 SP1 64 bit.

  My first idea as to why this is because I changed the hard drive in the laptop 2 (1366 x 768 a). It was a drive of 500 GB hard disc, but I replaced with an SSD and installed windows 7 cost. Not sure why this would cause the resolution to be less well?

  Any other information needed let me know.

  Thank you.

  One was ordered with the standard display panel (1366 X 768) and the other has been ordered with an upgrade screen FHD - in other words, the material is different.  This has nothing to do with the drivers, WIndows, etc - a system simply has a screen resolution higher than the other.

• Problem with Webcam integrated on portege series

  When I try to use the webcam, it comes up with the following error message:

  "Open Webcam driver fail. Please restart camera or computer. »

  I reinstalled the driver about 6 times, I uninstalled and tried to download at different Web sites. All have failed. The Camera Assistant Software does not open and no webcam or imaging device appears in Device Manager. I even tried to restore the laptop to factory settings and start again, but nothing helped.

  I'm completely stuck. Can someone please help?

  It's very strange. When you started your laptop for the first time have noticed some problems with the webcam feature?

  Usually after using the clean OS installation delivered support recovery, all should work well.

• Problem with the Dell Dock shortcuts

  I put a shortcut on my Dell dock some time ago, since then I deleted and added another shortcut to replace. Whenever I restart the computer, the old shortcut is back and my new must reset again. I tried the lock settings, but it always comes back to the old shortcuts on each reboot. How can I get the dock to hold its changed settings?

  Hello

  Willl you must contact Dell about this, because they provide you with the Dell Dock.

  Try asking their Support forums.

  http://en.community.Dell.com/support-forums/default.aspx

  See you soon.

• (Redirected) Serious problems with computer Inspiron 15, 7000 series

  I bought an Inspiron 15, 7548 end of may 2015. I bought to use for work and college classes and bought Adobe PhotoShop Elements and CorelDraw x 7 software (after PhotoShop has not worked) for photo editing. The screen resolution is so high that I see even the buttons program, Windows Picture Viewer and many other programs. They appear in and 1 "x 2" square in the center of the screen). Can I decrease the resolution of the screen with less desirable results. The laptop also freezes at random and must be delivered to work again. There is also a major shift by typing in Word 2013, Facebook, Tumblr & Pinterest. I spent 8 hours trying to get some sort of resolution with all the problems only to be told by Dell support that he's spent 30 days return period and there is nothing they can do to help me. I'm just trying to get this fixed, replaced or repaired (at this point, I would like my money). I can't talk with anyone in the United States (not Dell policy) and do not know where to turn. I started to document (images and videos) many questions that keep appearing daily. Technical support tells me the question with the hi res screen is a known issue and they are sorry but there are no miracle or patches. I even took off from work and led to their location in Plano, TX to try to get ANY kind of help. No luck there. I work inside and many of our technicians look at there, both say there are problems with the laptop.

  Anyone know who I can talk to (a person in the United States would be although I was very missed by India support person I spoke with last) or where I can take the laptop to someone with Dell show what is happening with it? I am at a loss here. I am a mother single life work paycheck to paycheck and spent over $ 1500 on this laptop and the software I can't use. I own a very expensive paper weight now. Any help would be greatly appreciated.

  Hi jbills8778,

  Please repost this in the laptop computer forum to help with your problems. We have great people who can help you.

  http://en.community.Dell.com/support-forums/laptop/f/3518

• problems with Dell Inspiron 15 3000 series-3543

  5th generation of the model; I7; 8 GB of ram,

  Starting time is, it's up to 60 years or a little more sometimes.

  Have already disabled all startup programs outside of anti virus and malware analyzed.

  Stand up black screen when starting. The game is already in repair twice when clean install windows first and 10, then windows 8.1 has been done.

  Also having problems with the touchpad. latest version of the driver has been installed.

  Please help.

  

  If all your troubleshooting fails, you can use the windows 8.1 tool to refresh your PC without affecting your files. Please click on the link below:

  www.YouTube.com/watch

• Problems with webcam Sony Vaio S series?

  I was on Skype and my camera suddenly stopping.  I thought it was the other camera people, but it was definitely mine.  And now even the program Silverlight do not recognize.  Anyone else had problems with the webcam?  Someone at - it solutions?

  Jman187,

  If you want to do a restore of Windows, follow this here.  If you want full restoration factory (deletion of data), then follow this link using F10 or this link using the Assist on Windows 8 unit button.  As a precaution, you should backup your data...

  If my post answered your question, please mark it as "accept as a Solution.

• Help! Aspire 5735 laptop with broken screen does not recognize external monitor after the factory restore

  I have an ACER Aspire 5735, running horrible Vista that never worked from the beginning, always locked up, media player never worked, on, on, and after about a year my dog took in the power cord and threw out of the table and the broken screen. I used it with an external monitor for a while, but it was even worse after that and after that he take to get fixed yet has proceeded to run super slow, always locked up, refused to stop or start upward normally, and so he sat in a closet for about 3 years.

  I took it out a week ago to see if I could at least use it for my kids to friends to play on, but that she still had so many questions, I decided to do a factory restore. And of course the recovery disks that I did when I got it do not work and are not yet recognized by the computer. So I went online and has used a method that I found there by rebooting and hitting the keys ALT F10 until I was at the factory reset option. It worked GREAT! Except once the computer has restarted and opened up to windows deleted monitor and I can't do anything with the computer because apparently it does not recognize that it is hooked to an external monitor on the restore to factory settings! Help!

  She does not recognize the monitor as it has been restarted and was even the windows start the display of the icon, but as soon as it loads the screen becomes black with just the graphics "monitor is on but not connected to what either" floating around.

  Is it possible to access something in the BACK or other so he could recognize the external monitor?  What is finally toast?

  Connect the external monitor to the laptop.

  Hold down the FN key and press the F4 key. Check if you get a display on the external monitor.

• Question on the docking station and external monitor support

  Hello

  Can you please let me know of the docking station (name, model number, etc.) I need to connect to two external monitors to my hp laptop 8560w (not the laptop screen).

  Thanks in advance

  rogers7942

  This allows 2 additional monitors in addition to the laptop screen:

  http://h30094.www3.HP.com/product/SKU/10432932

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Many problems with my D530 SFF, freezing and black monitor (windows xp operating system)

  First off I want to start by saying that I am a complete noob when it comes to computer repair. But since it wouldn't kill me if I lost the files on my computer and I intend to get a laptop soon, I'm willing to tinker and try to solve the problem with my office on my own. First on my cpu fan had started to get progressively stronger over the years that my HDD approached capacity. And it seemed that the computer can get more hot than the optimal temperature. At the present time, I think the hard drive is completely filled and maybe ultimately causing my problems. Periodicly, I started getting messages that my virtual memory is too low and that the system could make more room. Now I clean a bit and delete files to make more room. A year and a half, this computer has not connected to the internet that last week I hung it and installed a bunch of updates automatically from windows (seemed to run more quiet and cooler). I also deleted bitdefender and malwarebytes and installed Avira. At the beginning everything worked well for a few days (some lag sometimes, but he had been trolling for a while) and that one day I left the system and did things around the House. When I came back my computer was powered down on its own. When I tried to restart led lights up and the fans and cpu but my monitor does not receive a signal. I turned the computer off checked cords, get rid of the dust in the case and that I tried to restart and got the same thing. After that, I pulled the ram and clean the slots and riser and the cd player and I tried to reboot after the installation. If I remember correctly this time the monitor received the signal, but the system froze on the start menu to hp. After that I stopped and restarted the monitor could not receive the signal. At this point, I decided to leave the 'thing' sit overnight and try again in the morning. I have two-way to ram and Board riser with those of d530 my father and got the same results. After about 6 hours or so I started the computer today and was able to start windows, but when I tried to access the control panel the system froze.  Initially, I thought that my graphics card was out, and I read somewhere else that others had similar problems when their processor is out, but the fact that windows started today left me speechless. It seems I can get liked long in the longer boot process I leave my office to sit down. What is an overheating problem?

  Hello:

  Your SFF model has two known issues. The CMT is not the power supply issue.

  1. the power supply explodes and smoke if left unplugged for a long period of time, so do not leave it unplugged. There are videos of this on the internet for your viewing pleasure (say).  I had 2 of them jumping on me. Scares the heck out of you!

  http://www.YouTube.com/watch?v=nHPf6jHdEFg

  More information.

  http://h30499.www3.HP.com/T5/business-PCs-Deskpro-Evo/HP-D530-SFF-power-supply-failure-information/TD-p/1040147

  2. the model is released at the time of counterfeiting capacitor.  The symptoms that you are desribing made the diagnosis of bad capacitors.

  Check the PC for capacitors sealed or curved around the processor and the motherboard in general.

  Here's a good article on who and what to look for. First browse the links on the left and on the right, there are pictures.

  http://badcaps.NET/pages.php?vid=2

  If you have bad capacitors, I would just scrap the PC. IMO not worth fixing - what with the bomb ticking power and everything.

  Get a dc7xxx used on eBay for less than $100.

  Paul

• Dell U3011 Max resolution problem with Latitude E6510

  Hola,

  I have a Latitude E6510 E-Port Plus anchor and U3011 monitor.  The laptop has a NVIDA NVS 3100 M with driver 8.17.12.5922

  Using the Dual-Link DVI cable attached to the monitor I can only get a max of 1920 x 1080 resolution.

  The Dataport interface using the full 2560 x 1600 resolution works.

  The problem is that I have two PC I want to connect the same screen and switch between them using the built-in monitor source selector.  The monitor has an interface unique dataport only, but has 2 x Dual-Link DVI - so I need at least one of the DVI ports support the full resolution.

  Is it possible with this Dell laptop, the Dell dock, this Dell monitor, connected with the Dell supplied cable DVI?

  1. is this laptop support Dual-link DVI? I can't find the E6510 User Guide.

  2 - is the Dual-link DVI support dock?  The E-Port user's Guide is not clear.

  3. by Guide Dual - link DVI U3011 user is supported.

  Best regards

  Emilio.

  Dr. Emilio Lizardo,

  None of the docks support DVI - D Dual Link. If your locked to the resolution of the unique link.

• Problem with laptop and docking station

  Hello.

  We have two laptops with two docking station. Two laptops with docking station have the same problem:

  When the computer is off and its still connected to the docking station, the fan in the computer to run very fast starting. The fan turns on for a while. That's a lot of noise, which can be annoying to the person using the office. When the computer is turned on, the fan runs at normal speed. If you disconnect the computer from the docking station, the fan stops immediately. Any ideas?

  1. number and product name

  HP ProBook 6460 b

  Docking Station VB043AA

  2 operating system installed

  Windows XP 32-bit

  3. error message

  No error message.

  4. all changes made to your system until the problem occurred
  

  No recent changes.

  Thanks in advance.

  -Betroger

  Its been a while that we have solved this problem, but I forgot to post the solution.

  We sent the laptops in for repair. They changed the motherboard and fans. This solves the problem.