problem with linux

Similar Questions

• Tecra S2: Problems with Linux Live CD after upgrading the BIOS

  Hi all

  A few moments ago I flashed the BIOS on my Tecra S2. Now, my current BIOS version is 2.80. Unfortunately no, I had problems with booting of Linux Live CD like Knoppix or Kanotix. The freezing of the startup process, when the PCMCIA module is tried bo be started.
  What I want to do now is to downgrade my version of BIOS. Is anyone know how it works, and someone has an older version of BIOS of 2005? I couldn't find any older versions on the Toshiba support sites.

  Thanks for all replies!

  Biberkopf

  You re right. On the Toshiba page you will find only the latest version of the BIOS and the older versions are not available on the page.
  In my opinion if you want to downgrade the BIOS question using the service provider authorized in your country.

  But have you checked this site useful:
  http://newsletter.toshiba-tro.de/main/

  There you can get help with installing box machine
  It provides some useful advice to the configuration of the device

• NB100 Linux - problems with Linux update and BIOS

  Toshiba NB100
  Memory 1 GB - Kinston - KTT667D2 / 1 G
  Ubuntu 8.04 - Ubuntu Netbook Remix - CD from Toshiba
  CD-rw/DVD-rw LG GE20 externel USB key
  Keyboard differences

  Hello

  I was very happy to buy my Toshiba netbook.

  First of all, I configured the system ready - to reach the time Ubuntu-desktop, the first and everything was fine. Then I browsed menus and soon found "Aktualisierungsverwaltung" in German - should be 'Updatemanagement' in English - and began. After that I got a slow system, no sound card and later downloaded bios-udate 1.6 does not work too.

  I bought the DVD LG (~75US/~60Eur) burner and restored with the Remix DVD Ubunto system. Who works well and takes about 10 minutes. I bought a Kingston memorymodule too and I've replaced the original one. The Kingston-modul works fine too.

  After that I had read the thread, that work of doesn´t-update BIOS after update Ubuntu I tried again and now I have a good job of BIOS 1.6.

  But I still 2 faullts:

  The ' | '. (vertical bar) is not as shown on the keyboard Fn + X - it is Fn + Alt +.<>

  The 151-update "package" still damage the system - I tried it for 2 times doing nothing but the restoration, of networking, and update.

  The new 1.06 driver sound that I found at Toshiba-Germany and France-Toshiba are dead links (404), the line will help Toshiba now resolve this problem since 2 weeks and don't call back.

  Any ideas?

  Read this link about the update of the bios and Linux updates

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=40156&start=15&TSTART=0

  Try this link for the sound

  https://edge.Launchpad.NET/%7Ejouston-Huang/+archive/PPA/+files/NB100-sound_1.09_lpia.deb

  The keyboard on my link. is Fn + Alt + z. This is for the UK keyboard.
  Have you checked that your keyboard is correct for your country?

  System/preferences/keyboard.

  System/preferences/shortcuts keyboard

  Hope this helps

• Problem with linux vWorkspace

  Hola
  
  Currently I have 1 server with IIS for Gateway , 2 Server for Brokers vWorkspace and 1 Server RDS
  
  By using vWorkspace connector from Windows I have no problem to connect to VMs or applications ( notepad for example). But since Linux only connection works VMs , applications show error "Failed TCP Connection "
  
  also I have a Dell Wyse SUSE 5010 and the same thing happens to me .
  
  Everything is mounted on Vmware
  
  What could be the problem?
  
  Thank you!
  

  NLA is enabled on the server RDSH?

• Problem with Linux P2V

  Hi all

  I'm trying to convert a physical Linux machine to our ESX host, on the converter, I can connect to the box, set the options including giving virtual machine using a static IP address because it is not DHCP on the network and I start to convert it, when I look at the console on the ESX I can see the machine start to convert , he asks a user name and password to connect to help what I do (I have corrected the file converter for that worker) but once it connects to the conversion just websites it y to 1% and does nothing else / is there something escapes me?

  Thank you.

  Hi all

  Work in the end, don't know how, I restarted the source machine and the pc with the converter on it, ran the process again, it works. But thanks for getting back to me.

• Problems with linux SSL connection to iaas hosts agent (cert.pem exists)

  
  IAAS server is 2012R2

  I am unable to get my Centos prompt in SSL handshake with my server iaas.  Windows Journal: a fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is at 1205. [Newspaper axis sea may 13 at 11:32:02 2015] [info] [client ssl] Client certificate chain specified filenot [sea may 13 23:32:02 2015] [error] ssl/ssl_utils.c (153) error in the SSL engine [sea may 13 23:32:02 2015] [error] ssl/ssl_stream.c (108) error in the SSL engine

  Any ideas?

  https://support.Microsoft.com/en-us/KB/2973337

• Problem with Linux Blueprint receives not to HOST name or IP address after provisioning

  We run VCAC 6.x and I have setup a plan for a version of linux RHEL 5. Network profiles have been implemented, as well as some ip address ranges. When I load the action plan the machine does not receive the defined HOST name. The network interface comes up, also has a MAC address, but has no IP address assigned address. When I connect vcac and check stocks of intellectual property, I see that an IP address has been assigned. What I'm missing here?

  You have a configuration specification of customization vCenter and applied to this profile of renewal and construction?

• Qosmio G20: Problems with tuner TV and Qosmio player on Linux

  Hello!

  I would like to install a Debian's Linux distribution based on my machine... But it looks like there could be some problems with a TV tuner and the qosmio player.
  Is there someone who could help me with a viable solution for this?

  Lasse

  Hello

  Well, you need a TV tuner driver, but the problem is the LINUX operating system.
  There is no drivers for Linux. Toshiba doesn't supports Linux. In addition, you will not find also all the drivers.
  All you can do is to use the Windows operating system. The Knoppix and Kanonix are very nice Linux distributions. You can run these Linux from the live CD. You n t need to install anything.

• Problems with Qosmio G20 and SuSE Linux 10.3 installation

  Hello

  I can't install SuSE Linux 10.3, because the hard drive will not be detected.
  I think it's the Software Raid... in the BIOS are only the options of Raid 0 and JBOD. When I changed to JBOD, it says I need to install the new os.
  Windows XP Professional is installed on the computer and I want to have a system to dual-boot with Open SuSE 10.3.
  How can I solve the problem?

  MfG

  Man... that's a really complicated problem.

  First of all, please consult this site unofficial toshiba official: http://linux.toshiba-dme.co.jp/linux/eng/pc/QosG20_report.htm

  West a complete report on your machine where all material etc. are described. The two entries on the bottom of the site describe the problem that you have.

  Another good friend called 'google' redirected me [THIS | http://ubuntuforums.org/showthread.php?t=574116] site.

  You see, it s a problem since your RAID controller is not correctly recognized by some kernels/distributions.
  I have no perfect solution for you, but I propose to try another distro (since there are hundreds of them) who could probably work with your machine.

  The best would be to visit www.google.com and type something like "Qosmio G20 linux raid". Trust me, you will get many results. :)

  Keep rocking with linux ;)

  Welcome them

• Paths multiple problem with PowerVault MD3200i + Oracle Enterprise Linux (5,7)

  Hello

  I'm trying to configure MPIO on a host (running Oracle Enterprise Linux Server 5.7) connected to an Powervault MD3200i. I have a few unexpected problems with/dev/dm-0 missing after reboot.

  I configured 3 virtual disks (RAID 1) with MPIO. 3 devices have been created (/ dev/dm-0, / dev/dm-1 and/dev/dm-2).  If I mount them manually, they work very well, so I've added to the fstab. After a reboot, I checked that/dev/dm-1 and/dev/dm-2 have been automatically but is not/dev/dm-0. In fact, the/dev/dm-0 has disappeared from the directory of the device (!)

  If I rinse 'multipath f' and ' multipath - v2 "the device gets recreated, but disappears on the"
  next reboot again. How can I resolve this behavior? Can anyone help?

  Thanks in advance.

  See you soon

  I thought about it... the problem is that I had the wrong specified dev in fstab.

  Should I use the devices in/dev/map /... it worked immediately.

• Problem with Oracle Forms 11 g 2 on linux

  Dear all

  Here's the problem:

  • -J' installed Oracle Forms 11 GR 2 (11.1.2.2.0) on Linux from Oracle using the JDK 1.7.0_79 6.6
  • -J' solved all the problems and issues of the Arab reports.
  • -Now regarding the oracle forms now when I compile the FMAS on WINDOWS and move them to LINUX, they work very well except for forms that use WEBUTIL the form runs but WEBUTIL functions do not work
  • - So I tried to compile these forms on LINUX now WEBUTIL feature works, but all forms (with or without WEBUTIL) compiled under LINUX display this exception message before the race, here is the behavior:
  1. 1 - the form has a trigger CONNECTION on, but here's what's happening
     
  2. 2. after pressing ok, it requires logon, and when I try to log displays the ORA-12705 as above and so on
     
     
     
  3. 3. but after I click on cancel turns on and uses the trigger opening SESSION and works of good form
     
     

  Hope there is a solution for this.

  Best regards.

  The problem was because I was using a NLS_LANG that contains a space in the value and it is surrounded by quotes like NLS_LANG ='NLS_LANG ARABIC_SAUDI ARABIA. AR8MSWIN1256', which worked very well with reports.

  but it seems that the quotes were causing problems with forms,

  So I put NLS_LANG to the two forms and reports ARABIC_EGYPT reports.sh default.env. AR8MSWIN1256 OR ARABIC_AMERICA. AR8MSWIN1256

  both work well, now no NLS_LANG, error

  but the question of having to recompile the forms when moved to another server, who I thought he was still a known issue.

  Best regards.

• Install HRCS 9.0 R5 with problem of Linux: HRCS90 of the database has no table PSSTATUS

  People,

  
  Hello. I was installing HCM and Campus Solution 9.0 with PeopleTools8.53. Server machine is Oracle Linux 5.10 and Windows XP-based client computer.  The architecture of my internet is WebLogic11g/Tuxedo11g/OracleDatabase 11 GR 1 material. PeopleTools 8,53 works correctly in the browser.

  
  In the database server Oracle Linux 5.10 machine, I run scripts 'createdb10.sql, utlspace.sql, hrcddl.sql, dbowner.sql, psroles.sql, psadmin.sql and connect.sql' one by one. Can I use Data Mover to load Windows XP data into the Oracle Linux 5.10 DB HRCS90 instance. The Data Mover script hrcs90ora.dms is done correctly in Windows XP. Configuration Manager is configured correctly.  But when I login in the application designer, I can't connect and get the message as below:

  
  «Security Table Manager (Get): the database is release 8.52.»  The PeopleTools running require databases at 8.53 release. »

  
  I followed the http://docs.oracle.com/cd/E37306_02/psft/acrobat/PeopleTools-8.53-Upgrade_02-2013.pdf document to upgrade HCM and HR 9.0 revision 5 Database Instance HRCS90 in Oracle Database Server with Linux. I did in chapters 4 and 5. But the connection to the application designer and start the Tuxedo application server can always put the same error message: "the database is release 8.52. The PeopleTools performed require a database at 8.53 release. »

  
  I ran 4-3-2 of the task script ptddlupg.sql and PSIMAGE2 tablespace is created successfully.

  When I run rel853n.sql script Task 4-3-5, I see the first line table PSSTATUS does not exist.

  The big problem is that there are no PSSTATUS table in my database HRCS90. I activated Windows XP Data Mover C:\PT8.53\log\hcengs.log as below:

  ... ...

  The remaining records: 7687

  Import PSSTATUS

  Creating Table PSSTATUS

  Import PSSTATUS

  Indices of real estate required for PSSTATUS

  Update statistics for PSSTATUS

  The remaining records: 7686

  ... ...

  
  As we see above, the hrcs90ora.dms script load PSSTATUS table in the instance database HRCS90. But the PSSTATUS table is not in HRCS90.

  
  
  My questions are:

  First of all, why is there no PSSTATUS table in my HRCS90 database? What stage is the problem?  How to fix?

  Second, does run the hrcs90ora.dms script in Windows XP Data Mover to load data in HRCS90 under Linux, yet due to no PSSTATUS table?

  
  Thank you.
  

  PSSTATUS is the property of the accessid, means that the user Oracle appearing in PSDBOWNER.

  You are not connected with this user but you can ask PSDBOWNER because there's a public synonym, which is not the case for PSSTATUS.

  But I think you missed the point that upgrade scripts must be run with this accessid (again, it is the owner of the Peoplesoft tables).

  In front of your whole posts on this same forum, I am always surprised you make this mistake, if I remember correctly, this point has been said several times for you.

  Nicolas.

  PS:

  > Moreover, can't copy and paste the contents of my computer on the Forum. My browser there problem or the Forum have problem?

  It is a known bug in the forum in a configuration of your browser/operating system...

• When we publish a Web site create in MUSE, the server must be linux? Please let me know because I have the problem with the form works... now the server that I use is the window...

  I am trying to publish in my domain on windows server, but I have a problem with the form...

  The server must be linux to work the form?

  Thanks in advance for your help...

  Thank you Brad... but how can I understand if a Linux server support? I try to do something in particular?

• Having problems with SQL Developer connection to the database on a LINUX machine

  Having problems with SQL Developer connection to the database on a LINUX machine
  Hello
  I am trying to connect my machine to windows 7 Home premium to an oracle database 11 g on RedHat 5 machine using SQL Developer. I got this error on SQL Developer
  Status: Failed - Test has failed: the network adapter could not establish the connection
  
  
  on Linux
  

  LSNRCTL> status
  Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
  STATUS of the LISTENER
  ------------------------
  Alias                     LISTENER
  Version                   TNSLSNR for Linux: Version 10.2.0.1.0 - Production
  Start Date                03-APR-2013 16:13:13
  Uptime                    7 days 22 hr. 16 min. 41 sec
  Trace Level               off
  Security                  ON: Local OS Authentication
  SNMP                      OFF
  Listener Parameter File   /u01/app/oracle/product/11.2.0/db_1/network/admin/listener.ora
  Listener Log File         /u01/app/oracle/product/11.2.0/db_1/network/log/listener.log
  Listening Endpoints Summary...
  (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
  (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=172.X.X.X)(PORT=1521)))
  Services Summary...
  Service "PLSExtProc" has 1 instance(s).
  Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
  Service "orc11g" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11gXDB" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  Service "orc11g_XPT" has 1 instance(s).
  Instance "orc11g", status READY, has 1 handler(s) for this service...
  The command completed successfully
  LSNRCTL>

  and TNSPING
  

  tnsping 172.x.x.x
  
  TNS Ping Utility for Linux: Version 10.2.0.1.0 - Production on 11-APR-2013 14:32:17
  
  Copyright (c) 1997, 2005, Oracle.  All rights reserved.
  
  Used parameter files:
  /u01/app/oracle/product/11.2.0/db_1/network/admin/sqlnet.ora
  
  Used EZCONNECT adapter to resolve the alias
  Attempting to contact (DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=172.x.x.x))(ADDRESS=(PROTOCOL=TCP)(HOST=172.x.x.x)(PORT=1521)))
  OK (0 msec)
  [oracle@ltebilling ~]$

  Tnsnames.ora on Linux,
  

  ORC11G =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orc11g)
  )
  )

  Listner on Linux,
  

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  (SID_NAME = PLSExtProc)
  (ORACLE_HOME = /u01/app/oracle/product/11.2.0/db_1)
  (PROGRAM = extproc)
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
  (ADDRESS = (PROTOCOL = TCP)(HOST = 172.x.x.x)(PORT = 1521))
  )
  )

  hosts/ect/Linux,
  

  # Do not remove the following line, or various programs
  # that require network functionality will fail.
  127.0.0.1               localhost.localdomain localhost
  172.x.x.x             LTEBilling

  and there is no problem to ping linux from windows
  
  Published by: user11309581 on April 11, 2013 15:16

  user11309581 wrote:
  as I have already desciped earlier, I can't connect to the server throw Linux my Windows SQL Server, with error message below.
  tatus: failed - Test has failed: the network adapter could not establish the connection

  It's too generic to mean anything. The application is hidden the real error message. You got when you did the tnsping and obtained "TNS-12535: TNS:operation has expired. Now THAT's an error.

  This indicates a problem firewall and routing. You said earlier you could ping the server, but now we see tnsping fails. Two different protocols of usage, so that both the successful ping turns out a valid physical path, it guarantees not that all traffic will pass. What happens with

  c:\ telnet 172.x.x.x 1521
  

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André