problem with & lt; body & gt; in htmlText using the style sheet

Similar Questions

• I had to uninstall firefox because it was causing so many problems with my computer. I was using the latest version 18. What is the problem?

  I had nothing else problems since I installed the latest version of Firefox version 18. It crashes my computer no matter what I do. Even if I do not use the browser. I uninstalled three times and the problems just seem to be deteriorating. Finally, I uninstalled and it did not reinstall again. I will not use again until the problems are solved. Also, I don't know is that funmoods or whatever it is that has replaced my google home page. I don't like software to decide what services I use. I've been a user of firefox for more than 15 years. I've never had problems like this before. I spent in Safari. It works without interfering with the other tasks I do on my computer. I don't know what version 18 is but the previous version of firefox that I used was perfectly fine. I had no problem whatsoever with it. It seems as if this version has not been tested enough. Also my daughter is having the same problems with his computer and they all started with the new version. So it isn't just me. At least give us the option to revert to the previous version and we ask if we want to improve when a new spell. However, I never had these problems in the past with any version of firefox that I installed. I like the features of firefox, but cannot afford to keep restarting my computer. It seems that firefox is hindering and then hangs up the computer and I can't do anything else even if I do not use it. It seems to stay in the background and just hang up. Please fix this.

  The problem is unlikely to have been with Firefox itself. It is much more likely to have been with some software or malware you have inadvertently installed

  Installs official Firefox is not bundled with other software. Firefox is customizable and has many extensions of the software you can choose to install but don't have to do anything.

  Funmoods is also a malware or at least software which is often hated to see these messages

  • https://support.Mozilla.org/en-us/search?q=funmoods

  If you want to reinstall firefox official site:

  • http://www.Mozilla.org/en-us/Firefox/all/

  Then start playback on the malware removal and the toolbar

  • Fix Firefox problems caused by malicious software
  • Remove a toolbar that has supported your Firefox or the homepage search

  If you want more advice back again post.

• Problem with update of a column by using the procedure of database and refreshing or put in value programmatically

  Dear all,

  I am a beginner in the ADF and am under Jdeveloper Studio Edition Version 12.2.1.0.0.

  I have a page that consists of two taskflows.

  First workflow has a fragment which is to have a table based on view object salespersons (not editable)

  Second task flow contains a form of ADF from the same view object Salespersons.

  As the user selecting a line in the table of the same record is displayed as no problem.

  Now, I have added two buttons Activate and Deactivate that is to change the status of the sales.

  I tried to use two ways an updated using the procedure of database and then put in value by programming and I have different questions with two of them:

  Now, here's the code of the Java bean for activation:

  Option A - the problem with this is the value of the column in the list (the first task rate displayed) is not synchronized

  and Activate and Deactivate buttons are not disabled and active properly.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  Links BindingContainer = getBindings();

  OperationBinding operationBinding;

  operationBinding = bindings.getOperationBinding ("changeSalespersonsStatus") (OperationBinding);

  operationBinding.getParamsMap () .put ("pId", vId.getValue ());

  operationBinding.getParamsMap () .put ("pStatus", "A");

  Object result = operationBinding.execute ();

  dcStatus.setValue ("A");

  } else {}

  return;

  }

  }

  Option B - the problem with this is that the value of input for status text appears in the Active form for all records in form regardless of its database.

  {} public void confirmActivation (DialogEvent dialogEvent)

  If (dialogEvent.getOutcome () == DialogEvent.Outcome.yes) {}

  -no doubt this two lines are not needed here

  DBSequence vId;

  vId = dcId.getValue ((DBSequence));

  dcStatus.setValue ("A");

  BindingContainer links = getBindings();

  OperationBinding operationBinding;

  the operationBinding = bindings.getOperationBinding("Commit") (OperationBinding);

  Object result = operationBinding.execute ();

  } else {}

  return;

  }

  }

  Here's the code from the Fragment of shape for used buttons.

  "< af:button text = 'Activate' id ="bActivate' icon="/icons/activate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonActivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= ' n '} ">"

  < af:showPopupBehavior popupId = "pActivate" / >

  < / af:button >

  "< af:button text = 'Disable' id = 'bDeactivate' icon="/icons/deactivate.png ' iconPosition = 'top '.

  partialTriggers = "Bcreer bSaveInsert bCancelInsert dDeactivate dActivate".

  Binding = "#{pageFlowScope.salespersonsForm.buttonDeactivate} '"

  Disabled = ' #{bindings. " Status.inputValue! {= 'A'} ">"

  < af:showPopupBehavior popupId = "pDeactivate" / >

  < / af:button >

  Here's matching Popups for each of the buttons Activate and Deactivate.

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pActivate" >

  < af:dialog id = "dActivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmActivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to enable the seller?" id = "ol1" / >

  < / af:dialog >

  < / af:popup >

  < childCreation = "deferred" autoCancel af:popup = "disabled" id = "pDeactivate" >

  < af:dialog id = "dDeactivate" type = "YesNo" title = 'Status of salespersons' closeIconVisible = 'false '.

  affirmativeTextAndAccessKey = "& amp; Yes"cancelTextAndAccessKey ="& amp; (Cancel)

  noTextAndAccessKey = "& amp; No '.

  dialogListener = "#{pageFlowScope.salespersonsForm.confirmDeactivation}" >

  < f: facet = 'buttonBar' name / >

  < af:outputLabel value = "Are you sure you want to disable the seller?" id = "ol2" / >

  < / af:dialog >

  < / af:popup >

  Thanks in advance.

  Best regards

  Arif Khadas

  If you bind components to a range of flow page bean. You must complete that it saves the State of the component longer than the life of the component.

  To change the value of the GET value of the component of the link layer and change it.

  In this way the changes are captured by the framework and you should see them.

  Timo

• Problem with copy paste function (for images) using the TinyMCE editor

  Can not copy paste images (a document - text Copies OK) to the tinyMCE editor in Windows 8. Seems to be the specific question of operating system.

  Use the tinyMCE editor for info on the download Web site. Copy-paste function works very well on a Windows7 machine

  Hi Anand,

  I would be grateful if you can help me with the following information related to the TinyMCE editor:

  1. What is the Web browser that you use to copy and paste images via the application editor TinyMCE?
  2. What exactly happens when you try to copy and paste images using the editor? You receive an error message?

  This problem may occur because of the compatibility of the browser with the TinyMCE editor.

  Check out these links and check if the suggestions help you to solve the problem:

  http://www.TinyMCE.com/forum/viewtopic.php?PID=34916

  http://www.TinyMCE.com/develop/bugtracker_view.php?id=6075

  If the problem is specific to the TinyMCE editor, you can also contact the support of TinyMCE:

  http://www.TinyMCE.com/enterprise/support.php

  Please let us know if you need more help on this issue. Otherwise, feel free to ask for more queries on Windows.

• I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel

  I need to reinstall photoshop elements 8 after having problems with my hard drive. I use MacBook Pro and a timemachine. After restoring the program of the Time Machine, I got the error 6 code: a license for this product has stopt working. How can I cancel it?

  See here:

  Error "Licensing has stopped working". Mac OS

• I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the entire thing on

  I am new to use the forums.  How to start a discussion?  The ICO next which is grayed out.

  I have a problem with corruption.  How can I change the timeline on an existing project.  Each image is moved about 2.5 min.;  My preferences are for 180 frames.  It does not seem to consider one after the fact.  Is it possible to copy the whole thing and put it in a new, m not corrupted project?

  Hello and welcome.

  I feel for you after reading your story, however, it that are supposed to do? It is a forum for Dreamweaver and to my knowledge, Dreamweaver has no functionality called the chronology.

  Could you please explain the problem so that we can understand?

• I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  I have an iMac 27' 2012 with macOS Sierra and Apple Watch with watch OS 3, I can use the function "Log?" in Apple Watch

  Hi John 2078 Tito.

  I understand that you have updated your iMac and Apple Watch and now you're curious about unlock your iMac using your Apple Watch. I know that it is a nice feature to be able to quickly and safely unlock your computer, so I'm happy to help you.

  This feature is available on 2013 iMacs and later versions, which means that your iMac won't be compatible. You can see more info on this feature here:
  Unlock your Mac with Apple Watch - Apple Watch user's Guide

  Thank you for using communities Support from Apple. See you soon!

• How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Active Sync iPad ssl Client certificate

  How do I configure the iPad2 to synchronize the iPad-Mailclient with Exchange 2010 via Active Sync using the certificate SSL client and name of user and password?

  Hi Ewoki,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the TechNet Exchange forum. Please post your question in the Forums TechNet in Exchange Server.

• Problem with printing PDF page of document in the Windows XP computer.

  Original title: printing problems.

  Hello. I use a HPF380All-In-One printer and a PC 32-bit, Windows XP for 8 years - not a new computer.  I'm no expert. I just use. I print PDF files from a disk, but the lower end of the A4 page in not printed.  Could you tell me how any page of document PDF A4 printed on A4 paper? I will appreciate it. Thank you very much.

  Hi MarieVardi,

  1. are you able to print from other applications?

  2 are you able to print pdf file?

  3. were you able to print pdf files correctly previously?

  You can follow this link & check if the problem persists:

  Resolve PDF printing problems. Acrobat, Reader

  
  Reference: Printers HP Designjet - problems printing PDF files from Acrobat Reader using the HP-GL/2 driver

  Hope the helps of information.

• Problem "there could be a problem with one or more network adapter on the computer?

  Hi, I just changed my modem, I can't connect to the internet. I can connect to wireless network but not to the internet. When I diagnose, he said, "there could be a problem with one or more network adapter on the computer. I searched the internet but I can't find anything. When I diagnose, I have also seen something on the 'hot spots', but I can't remember it clearly? Any help please?

  Also, when I go to Device Manager network adapters, each of them has WARNING signs except two of them.

  Hello:

  If your laptop is an Atheros AR5007 wireless card, see if installing this driver solves the problem, you have to be able to connect to wireless but no internet network.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-108905-1&cc=us&DLC=en&LC=en&JumpID=reg_r1002_usen_c-001_title_r0004

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing

  Ideas to explain why, when you work with raw files in LR 2015 with Edit in PS 2015 and use the Camera Raw filter, the profile in the Lens Correction Panel tab is missing? Mac OS X 10.10.5.  I reinstalled the OS and Lightroom and PS, nothing helps.

  Hi ParadigmRose,

  This is expected as profile tab behavior does not appear under Lens Correction Panel if you go to Camera Raw Filter in Photoshop

  However, profile tab would be there if you open a raw image directly in camera raw first.

  You can go to the filter menu > Lens correction in Photoshop, if you want to search for profiles with edit in Photoshop.

  Kind regards

  Claes

• AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  AI CS5 keyboard shortcuts do not work. I restarted and have no other problem with my MacBook Pro. What is the problem?

  Bill,

  The following is a general list of things, try when the question is not in a specific file, and when it is not caused by problems with opening a file from external media. You tried/made some of them already; 1 and 2) are easier for temporary strangenesses and 3) and 4) specifically preferences might be corrupt); ((5) is a list in itself and 6) is the last resort.

  If possible / there is, you must record a current work first, of course.

  (1) close Illy and open again.

  (2) restart the computer (you can make up at least 5 times);

  (3) close Illy and press Ctrl + Alt + Shift / Cmd + Option + shift during startup (easy, but irreversible);

  4) move the folder (follow the link with this name) with closed Illy (more tedious but also more thorough and reversible), for CS3 - CC you can find the file here:

  https://helpx.Adobe.com/Illustrator/KB/preference-file-location-Illustrator.html

  5 look through and try the relevant among the other options (click on the link with that name, item 7) is a list of the usual suspects among other applications which can disturb and confuse Illy, point 15) applies to the maybe CS5, CS6 and CC);

  Even worse, you can:

  (6) (check the box to delete the preferences), run the cleanup tool (if you have CS3/CS4/CS5/CS6/CC) to uninstall and reinstall.

  http://www.Adobe.com/support/contact/cscleanertool.html

• I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  I'm trying to download the trial CC, but I get error 205 cod. How can I solve this problem? A few months ago, I used the trial CC and removed.

  Help creating cloud / cloud creative applications download error

  http://helpx.Adobe.com/creative-cloud/KB/error-downloading-CC-apps.html

• Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to fix this ti net pr

  Have a problem with Lightroom 5.4.  Given that the program crashed yesterday, will not start, it comes up with the message "Lightroom has encountered an error when reading the preview cache and need to quit."  "Lightroom will attempt to solve this problem, the next time he throws."  Except that it isn't, I get the same message and the program closes.  Anyone know what I can do to fix it?  Can not backup, can't do anything.

  There are dozens of discussions in this forum that describe the fix