Problem with Master Pages CS5

Similar Questions

• Problems with the pages of models CS3

  My site is www.cft-aft.org and I have problems with a page or two that were created from a master template that the images are not loading or projection. An example can be found at http://http :// www.cft-aft.org/Get%20Involved.html. I don't know what the problem is or how to diagnose.  All pages of this website have been created from the master template. I had some file management problems in the past, and I think I have corrected most of them (with the exception of the change of name without spaces). I understand that this could be a problem and if it is my problem with this specific page, I understand.

  I have attached a few screenshots of the presentation of dreamweaver and a screenshot of my side of local and remote sites.

  The main problem with the page get involved is not editable images do not exist. Everything lies in the local root folder of the site/htdocs, on both sides. I noticed that when I do to the top of the page get involved in DW is at the top right of the screen, he reads a long path (shown as an example on the screenshot) and on other pages which load correctly, the path is not the same thing, but they reside in the same folder. I suspect that this is probably my problem, but I'm confused, how it got like that and worse still, how fix without having to completely rebuild the page.  I am a total novice and teach me how to do this using the DWCS3 Missing Manual book, but I can't find a solution in there, so please help if anyone can, with step by step instructions.

  If anyone has any idea how it happened, I'd appreciate comments so I do this again.

  If more information is needed, please let me know.

  Thank you

  Hi, Kelly.

  What keeps you from renaming files with Word spaces? It is a good idea. On ALL of your files. Rename them to the INSIDE of the files Panel.

  You work in a defined site? Yes, you are.

  The page you we directed (with an address disheveled, but easy to fix on the track), shows a large number of links to files on your computer, do not using links to other files in your root directory.

  You must open your template and reapply links to all images. Save the model. Once you have re-applied the links in your template Master.dwt, change > models > update of the Pages... while your model is open (especially if DW does not ask if you want to update the files). Record everything (better yet, don't have other pages opens when you update the pages...).

  Depending on how you created your page "Se Involved.html", it would be preferable for you to set up a new page of the child of your template and copy the changing content of the old page. Name the new page (without spaces in the file name... lol...) and save it. You won't be totally rebuild the page, because a lot of it will flow in your model.

  Commenting on your illustration to pdf, you want the indicator model-based Yellow Page in the upper right of your page based on a model of read model: Master. Pages containing the path to the top there are incorrect. I don't know how this happens, but it could be a problem with moving the files outside the DW (bad idea)... always use the files Panel to move files. You have full access to your computer in this window.

  Beth

• Problem with corrupted file CS5 for mac

  Hello

  I have problem with instalation Photoshop CS5 EN Mac. I downloaded the file instalatian to download produktow pakietu Adobe Creative Suite 5

  When I try to install I have info that instalation file is corrupt.

  Please help me solve the problem.

  concerning

  even if your error message may not seem related to the issue discussed in this link, try it:

  http://Mac-how-to.WonderHowTo.com/how-to/open-third-party-apps-from-unidentified-Developer s-mac-os-x-0158095.

• I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  I have problems with my Photoshop CS5 crashing when I go to print on a new iMac / running 10.10.5 suggestions?

  Go install the updates to Photoshop CS5 - you have not installed one any of them, and the first update solved the bug of printing that you are experiencing.

• Problem with the pages created from the master

  I work on a leyouts of photo album and have created multiple master pages containing "Rectangle Frames". I want to use these images to insert pictures.

  If I insert the photos in frames on the master WITHOUT creating a new page, based on the mask, everything works fine.

  However if I create a new page and apply this master, I can add pictures to a few "Rectangle frames" properly but some do not accept the image at all or streach the picture outside its borders. In any case most of the frameworks become unusable (?)

  I tried to recreate some masters, but didn't help at all.

  No idea how to solve this problem is appreciated.

  Thank you.

  Guides can be selected and copied like any other object, as long as they are not locked. If you want them in the same position in a new page or a document, you can "paste in place."

• Problems with the page master Muse appearing differently

  I use a master page to create a header/footer consistent throughout my site.  It looks like a lot when I saw in the browser, however when published gets wildly distorted/changed... Except on one of the pages.  On one of the Web pages, it appears exactly as it did in the preview.  I checked everything I can think and have run out of ideas.  See the screenshots below, I'm sure you can guess which is the wrong version

  

  

  Perhaps you have been broadcast on a bug that will be fixed in the version of fix to come.

  If it is this bug, it is a temporary workaround by going in "Site Properties / Advanced" and cut the option 'enable editing InBrowser'.

• Issue of pagination, especially with master pages

  I got a doc InDesign already worked on another designer, of my client, who needed the reworked paging. The previous designer had value on 16 master pages with all sorts of settings, that creates havoc.

  I need launch the registration page on what is actually page 10, starting with the number 4. Is this possible? I've never had a problem with that, but I also never had such a request and had to work on such a single paging implemented.

  Help, please?

  With the page you would like to become page 4A put highlight in the menu available, or in the Pages palette, choose the numbering and Section Options.

  From there, you can choose the Section start and designate this page as page 4.

  You will also need to go to page 1 and make the same thing, in order to change the page numbering style other than 1,2,3. This prevents you from having two pages 1-4.

• Having a lot of trouble with Master Pages. One minute they were applied, the next minute they were not, but he says they are.

  Hi all

  I have a lot of problems with missing Master pages in InDesign.

  I was working normally today, and then I suddenly notice that base on some pages master page had disappeared. You can see how they look below!

  

  About 150 pages always have the master page was applied correctly, and not about 40. I tried to submit a new application by using the tab pages, nothing helps.

  The tab pages also asserts that the master page is applied to pages that do not show it.

  

  If page 114 and 115 have applied control, but do not display it. Then just above, page 112 & 113 are perfectly fine.

  

  Any ideas?

  If it happens only in a single file, save the file as an IDML and reopen it in InDesign. It may be damaged.

  If it goes over a file, try to restore your InDesign preferences:

  Garbage, replace, reset or restore the application's preferences

• Interlacing problem with SOUL/first CS5?

  Hello

  I'm having some problems with a file I'm trying to comply using CS5 SOUL of mxf XDCAM-HD wrapped wmv output that I need to be able to playback of a SDI black magic card.

  The source file is 25 fps PAL

  If I import the mxf in SOUL directly (without going through the first), I can output a file interlaced 6 Mbps CBR using the main profile successfully and it plays correctly on the screen I use to check the reading.

  However, I need to remove 2 audio channels hire them and superimpose a logo. I did it by importing the file in first, the necessary changes and exporting to the SOUL.

  When I do that, if I chose interlaced as my output of the SOUL, the file that results is terrible and movement is very choppy. If I change the output to deinterlaced, I see an improvement, but it is still not as good as the file that was imported directly from SOUL without passing by the first.

  I need to understand (and address) what is happening within the first who made a difference in the output file of the SOUL.

  Change the other output format as wmv isn't really an option at the present time.

  I tried changing the settings to interpret the film in SOUL as well as various other options. I understand that I may not have provided sufficient information here someone be able to help, but if you let me know what you need to know that I will happily provide it.

  Thank you

  Fix; your sequence settings must match your settings to images so that the output to be correct. When you drop images interlaced in a progressive sequence, you say that the film is actually progressive - he is not smart enough to know the difference and use the sequence as first master parameters settings. It looks good when you do not play in sequence, because the first natively works with it. However, when you export to an interlaced format of a progressive sequence, first is essentially reinterlacing the file, resulting in some very ugly artifacts.

  It's for another type of film, but try the procedure described here to get back you on track without having to do a re-Edition.

• Problem of master pages

  I have a problem with the master pages in In Design worm. 3. I am converting Pagemaker 7 to In Design and have problems my templates to move as they did in pagemaker. I have 2 master pages for numbering and other questions of left/right. in Pagemaker using my template, I might add that a page and the next page would advance to my next master.  Lets say page 1 used the left hand master and the master right-handed page2. Now I want to add a new page after page 1 he would use the master of the right hand and the old page 2 (page 3 of now) would flow and use the master of the left hand, as would after all the pages. With In Design when adding a page after page 1, I get a sheet with the master of page 1 and the old page 2 always uses the master page 2 even though it is now page 2 so shake all my master pages. the only way I see to the difficulty which is to go to each page and change the master page, and it's a killer. I'm sure I'm missing something, but I'm tired. Can someone help me please? PLEASE, I BEG YOU!

  Yes, he would. To do what you want, the master page must be a double page. Try to change the options of masters for the master A two pages, and then copy the elements of the B master in the second master page.

  Now, select all the pages in the pages palette and apply a. master

  Pagemaker document conversion can be almost useless almost perfect anywher.

  Peter

• What is the problem with this page and IE?

  Gents,

  I have this page, exported from Excel to a HTML file, added some jQuery and Spry ToolTips and published it.

  It works very well with Firefox and Chrome, but IE trips on it. It simply display a blank page.

  Here is the link to the home page: Référence PPBM5

  With FF or Chrome test results page appears without a problem with IE, it's just a blank page. It's the page that causes these problems: http://ppbm5.com/Benchmark5.html

  Who am I to spoil that IE does not work? Any suggestion is welcome.

  Ready for the same problem of crazy...

  You have

  It worked.

  Gary

• Problems with the page numbering

  Hello there ' All!

  I received a few questions about the numbering of the pages:

  1. When the notes are present, they appear over my page numbers (in the lower left corner), which makes them invisible. How to avoid this?
  2. How can I ignore numbering for some pages, as the cover page, table of contents etc. ?
  3. How can I connect page numbers in my table of contents to my actual page numbers?
     

  Thank you!

  1A, ill-conceived layout? Page numbers should ideally be placed on your master pages, and outside of the margins, you book to plain text (i.e., top, side, or underneath the purple square). Move the frames of page number outside the place of purple Director. If there is no room for this, you need to adjust your margins!

  2. you can 'ignore' the page numbers (they will keep existing), but you can hide them in several different ways. Easier - and more dirty - trick is to put a white rectangle on them (don't do this!). You can also (Cmd) Ctrl + Shift + click on any element on a master page, so "free him" and then just delete the entire frame, with the page number and everything (I wish you didn't do this...). The best way is to assign a new master page to only those pages; a specially created for this purpose (if you have other elements that should appear on all pages), or simply the "[None]" blank page.

  3 search 'referrals' help if you use CS4. You can also search for "Table of contents", it may be useful to regenerate all the content, so the text is up-to-date as well.

• MySQL Sytax error with master pages and details

  Master and detail pages.
  I get a SQL error when I click on an item in the master page.
  "You have an error in your syntax SQL; "check the manual corresponding to your version of the MySQL server for the right syntax to use near 'ID = 16 LIMIT 0, 10' at line 1"
  If I try to open the details page, I get
  "You have an error in your syntax SQL; "check the manual corresponding to your version of the MySQL server for the right syntax to use near 'ID = - 1 LIMIT 0, 10' at line 1"
  I created this pair by clicking on insert/object / master details page.
  I tried this several ways, but always get the same result.
  Is there a bug in CS3?

  Sorry that I have solved it myself.
  I accidentally put a space in a header of table in the mySQL database.
  Everything works fine now.

• 11g: problem with the page open in a new window

  Hello
  
  I have a simple application with two pages. Page 1 contains only one button:
  

          <af:commandButton text="commandButton 1" useWindow="true"
                    action="dialog:action"/>
  {code}
  
  Page 2 is empty. Action is defined in adfc-config.xml:
  
  {code:xml}
      <control-flow-case>
        <from-outcome>dialog:action</from-outcome>
        <to-activity-id>untitled2</to-activity-id>
      </control-flow-case>
  {code}
  
  When I click the button, page 2 opens in new window but page 1 stays kind of "locked". It takes two clicks on the button to get page 2 to show again (the first click sort of resets the page, and the second one works as it should).
  Same behavior reproduces in a very complex application (where, for instance, a table can be scrolled but selection is impossible). 
  
  This worked in technology preview, did something change and some extra step is required or this is a bug? I can send someone a test case, if needed.
  
  Thanks, 
  Pedja                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                        

  Pedja,

  I have confirmed that it is the glasspane.

  When you open a dialog box in a new window like this, the main window is supposed to be blocked interaction until the dialog box is closed properly (this technique is sometimes called a "glasspane").

  Just close the dialog window by closing the browser window does not mean "close" dialog box. You must use the AdfFacesContext API to close the window.

  Add a command button on your page 2, bind it to an Action listener that does this:

      AdfFacesContext.getCurrentInstance().returnFromDialog(null, null);
  

  The behavior you see is correct; That is why the af: popup is probably a more "preferred" method to do so.

  I just saw your answer on the PDF - you'll still need clear the sort dialog box so that it works. You can use a ' print' button instead of a button 'command' (thus eliminating the need to use the framework of the dialogue)? I could not find any method of compensation of the dialog without actually closing the window.

  John

• Problems with redirection page badly giving-OK in IE8

  I have 2 files to redirect visitors to a monthly photo page. http://ILS.org.au/PRD.htm and
  http://ils.org.au/prd.html.
  The two files are identical, but the htm file redirects to the photo page last month instead of the month page.
  He has worked for months and works fine on another computer with IE8. He also works on this computer with IE8.
  It seems that the htm file is stuck in the cache and is not charging.
  I use Firefox 6 with Windows XP

  Visitors will probably mostly be visitors first and notice not or be affected. But I think it's likely that you have changed this redirect page later and you are using the cached version before you can specify non-cache. To avoid these problems on your machine, I would like to clear the cache at the end of a session, and it's the only thing that I want to erase.

  Tools > Options > privacy

  • http://img232.imageshack.us/img232/4928/clearcachew.PNG

  You can clear your cache immediately (now) with

  Tools > Options > advanced > 'clear now '.

  Two source pages look the same as you have indicated, copy and paste the following text in the address bar. Maybe that is not updated was different there is little time.

  • View-source:http://ils.org.au/prd.htm
  • View-source:http://ils.org.au/prd.html

  Please mark "resolved" a response that will better help others with a similar problem - hope it was her.

  Displaying links watch that you do not include an end of sentence at the end. If a period is to confuse a link, I leave out the period or use a dash then to incorporate the following sentence or add more words in the sentence.