Problem of master pages

Similar Questions

• Problem with Master Pages CS5

  Hello

  I started to update a file that I created several years in InDesign CS3. I am running CS5.

  I have several masters implemented herein pages facing pages. Sometimes, I applied Master A page from left and Maître D to the right page.

  The problem is, the master A there is a rule, put in place stretching of the Spine Center out to the outside edge of the page. Master D does not have this rule. However, on any set of pages where I applied the Master A for the left page and Maître D to the right page the rule appears, as if I asked the Master to the page on the right as well.

  The rule on A master starts EXACTLY at the Spine Center. If I move the rule on the page to the right slightly out of the centre, the rule will not be displayed.

  I've included some screenshots to illustrate the problem. I'd appreciate any help! Thank you!

  Master A screenshot

  .

  Screenshot of the master D

  

  Master applied on the left page, master D applied on the right page.

  

  Oh, wait! I just find a workaround. If I select the rule on master pages, pull on the Center back line and then fold it to the spine, it corrects the problem!

  Strange, but it works!

• problems on master page

  Hi, how to solve this problem.

  I http://imgur.com/Bx1UX8Q and I would do something like that http://imgur.com/DStlk1m

  You need choose your page 2 in the pages palette, then select 'numbering and section options. Select start the new article and the number of the page the value 1. You will get an alert telling you this page 1 already exists in your document - follow the instructions in the alert to overcome this obstacle.

  Good luck!

  Malcolm

• master page problem

  I begin barely using Muse on my iMac and I saw a bunch of tutorials. A couple of things already I have followed with great interest and that they work, but one real big problem is this: I created a bunch of buttons psd with the functional States to link to a registration form and social networks. They are all on the master page (I'm only using a master page to date). On my home page, I made a series of images with text scrolling superimposed to scroll at a faster speed. Looks awesome. Problem is the buttons that are found on all the main pages because they are on the master page moved to a different location on the home page. They still work, but they are in the wrong place. I can't select them. On the master page, they are always in the right position. Any ideas please? I tried to quit and reload.

  Unless the content is included in the page footer area in master, do not change location. Make sure that there are no used html embed, if so then remove it and then check.

  If everything is fine also same issue, then please post a few screenshots of the page master and the homepage in design so listen to excerpts and links to the live site.

  Thank you

  Sanjit

• Master page + alignment problem

  Hello

  Basically, I work on my site and I created an A-master page. Then I realized that I wanted to have a different master page because I wanted to MAKE another level to appear with the main master page. I'll do that for 3 subheadings more. It should be clear with the photos that I've provided (the right image is the homepage)

  Anyway. When I click on "Editor" he's going to the B-Master page, but this move a few centimeters down. I have reproduced the A-master page, it should be the same alignment. I had problems with the creation of the site where I had to group them so that it works correctly, so I tried this as a solution, but it did not work.

  Any help is appreciated.

  

  I thought about it. This is because the header at the top was not in the same position to the other. (God knows why it was not, because I have duplicate pages.)

  I think that when I was inserting a YouTube embed player should have played a little with it. I'm not sure.

• I created mega menu in adobe muse (master page) but the thing is when I saw the menu in other pages stuff I alreahy had created the will overlap the menu. Can I do to fix this problem. I wish I had the menu overlap the things I

  I created mega menu in adobe muse (master page), but the thing is when I spotted this menu in other contents pages I had already created will overlap the menu. Y at - it options that may correct this problem. I wish I had the menu overlap content. This did not happen on the master page (master page looks good) thank you very much.

  Place the menu on its own layer above the rest of the page content.

• Horizontal sliding composition on the master page problem

  Hello.

  I have a menu made starting from a horizontal scroll publication in my mobile site's master page.

  Here it is inactive on the left and Active in the right (in gray)

  

  The problem is this: when it is idle (as shown below) I can't click on anything whatsoever "below.

  So, for example, here is the page of Services with the main menu at the top right. Even if the menu is not active I can not click on the link text "Learn more" below.

  Another example: I can't slide through the images on the slideshow MSJ drilling on the work page.

  

  I would like to keep the effect of horizontal slip but don't know how to resolve this...

  Thank you very much

  Ben

  Unfortunately using this specific widget will not work. The reason is that, even if you don't see the background of the "Closed" box, it is always there, that's why you can't score anything below.

  You must use the panels/accordion Widget, because this will push the image down or overlay on top of the background.

• problems of changing an item on a master page

  Hello

  I was faced with a problem all day.

  I have a large document, use multiple master pages. I want a button on one page to make an element on a master page to toggle visibility. This occurs on all pages that use the master page in question.

  So... here is my code:

  if (this.rawValue == '2') {

  this.resolveNode("#pageSet.CoreMaster.nonDis").presence = 'hidden ';

  }

  if (this.rawValue ! = '2') {

  this.resolveNode("#pageSet.CoreMaster.nonDis").presence = 'visible ';

  }

  I placed it on a radio button set that has values for 1 = no 2 = yes

  If the user selects Yes (ie the value 2) makes the field of text called ' nonDis visible - if they choose No. - He then hides it. The nonDis of the element is on the master page named CoreMaster.

  It works! Finally almost. It only works on the first page of the document. It's the visibility on all other pages (that use the master page in question) still have the text as hidden nonDis field.

  By the way, thinking it was my form (it's abig form) that was at fault, I tried another nine form but nothing that an item, but with two pages and got the same problem - hidden on the first page, but not on the second.

  I have no idea why - can anyone help?

  Thank you very much

  Sunil

  Master pages are repeatable object, they also have numbers of index as [0], [1], etc.

  Your current expression makes referring only the first instance of your master page.

  To refer to all instances, you will need a loop function.

  Member of the var = xfa.resolveNodes("#pageSet.CoreMaster[*].nonDis");

  for (var i = 0; i)< mp.length;="" i="" +="1)">

  MP. Item (i) .its presence = this.rawValue! = « 2 » ? "visible": "hidden";

  }

• InDesign CS4 Excel data merge on the master page problem

  Hi all

  I had the following problem with an automated data merge document. He reads only the first row of cells in the document. That's what I did.

  Examples of data

  Excel

  Colum A Cel A1: Articlenummer

  Cel A2 12345

  Cel A3 5465

  Colum B Cel B1 Description

  Cel B2 Test 1

  Cel B3 Test 2

  Barcode Colum C Cel C1

  Cel C2 90000

  Cel C3 900001

  On the master page, I made a layout with the folling containers. The diagram below is for 1 item.

  Text for Articlenummer container

  Contatiner text for Description

  For the barcode text container

  I copied the three containers on the page which resulted in the master page with 40 containers for each item.

  I went data merge and connected the TXT document to the first set of containers. InDesign reads the data and place it correctly. But Indesign doenst copy the data in the row of the cell in the following sets of containters. If I connect the document to the next set of containers that indesign don't bed that the data of the first line of the cell which results in a document that contains only the same data.

  Somehelp with that does

  Best regards

  Phillip

  I suspect what happens, that's what I described in my previous post, PARAGRAPH:

  «Indesign takes what he considers a "record" what on the page, that is from the top left to the bottom right of the page, any indesign objects can enter it considers only a record.»

  It's a little hard to explain so I'll demonstrate in images using a simple merge

  

  

  If the finished merger looks like

  

  but, if a chart is placed on the same page (whether the page master or not, doesn't matter) this is where things can go wrong

  

  but this is easily seen in the preview

  

  so, when you perform a merge of data with multiple records, the data of the variable must be treated separately to static data (items that will be on every page as a background, or in this example, the smiley face).

  If the merger on a master page, static elements must be on a master page above and variable must be on a master BASED ON the static captain.

  If the merger on a standard page, static elements must be on the master page. The advantage with fusion on a master page is that data remain linked. The downside is that a page can contain variable data in the merged file.

  hope it makes sense.

• Master page problem pinning

  I've pinned a master page object in Muse.  When I saw the website, objects on the regular pages scroll above the pinned object master.  It seems ridiculous and defeats the purpose of pinning.  Is it possible to fix this or do I have to pin the object on any ordinary Web pages exactly in the same place?

  Pinning objects on the master page will rank the object back when a regular page... then your second resolution is correct, you will pin the object on every page and it size up to solve the problem of overlap.

• Captivate: No links or clickboxes on Master pages: a way to work around this problem?

  0 down vote favorite share [fb] share [tw]

  There seems to be a truth well worn in Captivate (I use v5) as no clickboxes or links are allowed on master pages, and that the only solution is to put them on each page. I have 6 files with a total of 200 or several pages - I don't want to be sticky laboriously links to each page. Is there a better way to do it, a way around the problem "no clickboxes or links allowed in templates? Otherwise: I already have clickboxes on all pages, but I want to change the old link for each clickbox to a new link which is the same in all cases - no manually going through each clickbox, but change them all at once if possible. Search and replace would be great if it worked for that, but does not find and replace "See" references link to clickboxes

  Yes, it is indeed a bone of contention hackneyed Captivate does not interactive objects on master slides.  Something we hope meet Cp6.

  If you have access to the skills of Flash and AS3 script, optionally create a SWF file or static widget that can be added to a master slide.  This object would then be able to have clickable areas (buttons in Flash) linked to external URLS.  Make them a link to the slides of the same project is also feasible.

  If you want to be able to change the URL of destination of a number of navigation buttons or clickboxes suddenly, so instead of creating the URL in each interactive object, I would suggest you set up a tip Action with the specified URL and come to get other objects at all perform Action Advanced.

• Problem with the pages created from the master

  I work on a leyouts of photo album and have created multiple master pages containing "Rectangle Frames". I want to use these images to insert pictures.

  If I insert the photos in frames on the master WITHOUT creating a new page, based on the mask, everything works fine.

  However if I create a new page and apply this master, I can add pictures to a few "Rectangle frames" properly but some do not accept the image at all or streach the picture outside its borders. In any case most of the frameworks become unusable (?)

  I tried to recreate some masters, but didn't help at all.

  No idea how to solve this problem is appreciated.

  Thank you.

  Guides can be selected and copied like any other object, as long as they are not locked. If you want them in the same position in a new page or a document, you can "paste in place."

• merge data master pages - problem

  OK - I posted prematurely b4 that I could do it successfully but am stuck with a problem that is a show-stopper.

  I have a master page spread [left and right pages] who has several fields that I fill out on over 200 pages with the data merge. I got this works ok, but the problem is that the fusion only works on the first master page - and since InDesig starts automatically with a right-hand page - it would be the 2nd page of my spread - I can get the two pages to merge the data correctly, but I end up with a right hand start page - then a left page facing a right-hand page which is not for the same record, but the account given below. Is tehre any way level this? Is tehre a way I can force inDesign to start with a left page?

  Change the same to something starting page number.

• Problem with script on the master page

  So I have my build script of the unique number bit that I have posted here before... it's on the Initialize event of the field.

  
  

  If (this.rawValue == null) {}
  var d = new Date();
  this.rawValue = parseInt(d / 1000);
  }
  else {}
  this.rawValue = rawValue;
  }

  Which works very well if on the body of the form, but if I put it on the master page it re - initializes (and changes the number) whenever a subform gets shown/hidden. No idea how to stop it from doing this? I tried it on a few other events without a bit of luck.

  I came across another problem with this script, a field called 'Date' was interfering with the script - throw an error "the Date is not a constructor. Is - this normal (function/field collision)?

  Hi Jono,

  I had problems with script within the Master pages before. What I've done in the past, it is a textfield hidden in the main pages of script with overall binding (which featured many here today); then same name textfield in the master page picks it up.

  Good luck

  N.

  Post edited by: Niall O'Donovan

• Problems with the page master Muse appearing differently

  I use a master page to create a header/footer consistent throughout my site.  It looks like a lot when I saw in the browser, however when published gets wildly distorted/changed... Except on one of the pages.  On one of the Web pages, it appears exactly as it did in the preview.  I checked everything I can think and have run out of ideas.  See the screenshots below, I'm sure you can guess which is the wrong version

  

  

  Perhaps you have been broadcast on a bug that will be fixed in the version of fix to come.

  If it is this bug, it is a temporary workaround by going in "Site Properties / Advanced" and cut the option 'enable editing InBrowser'.