Problem with Mat * a DVD - RAM UJ - 841S Satellite M70-165
Hello
I have a Satellite M70-165 equipped of a DVD unit MAST * a DVD-RAM UJ - 841S (5.1.2535.0 driver version).
After years of 1 and a half with no problems, a few days ago, I restore the operating system (Windows XP Home) through the Toshiba restart DVD.
Then the CD/DVD unit can read the DVD-audio, CD, or movie, but when I open a DVD (DVD software) data it is said that "it is not possible to access the D:\". ». and some time "poblem whith I/O device. and the same problem that I have with some new cd (which were not burn)
I have'nt try every thing. I come here to ask the question.
Sorry for my bad English
THX
You can do the following: go to download drivers of Toshiba Europe site and check if there is an update of firmware for this specific player. If so, I strongly recommend you apply and check if it works.
If the didn t of the firmware update worked later you assumed that the reader is defective and must be replaced.
Welcome them
Tags: Toshiba
Similar Questions
-
Problem with Mat * a DVD - RAM on P30 - 145 drive
Hi, I have a Toshiba P30-145 with a carpet * a DVD-RAM UJ - 831S Cd/DVD drive. I installed the version of Nero in my possession from my old computer, v.5.5.9.22, which seems to date back to 2002 c. Nero is not recognizing the carpet * one as a valid drive.
Is it because my version of Nero is too old? I visited the Nero Web site and find a list of compatible drives, but unfortunately, while much of Mat * one disks appear, my version is not. Any ideas?
Thank you!
Duncan
Hello
I think you are already on the right track. Is there any availble upgrades for your Nero? Sometimes there are packages of fixes that also contains some data-burner.
Pick up or use another version of the burning software.
BR
Tom
-
Equium M70 problems burning CD with Mat * a DVD - RAM UJ - 841S
HI - can anyone help? I am not able to burn discs, although I can play audio CDs. With the help of the software preinstalled but RecordNow error message which is no recorder. Help - please!
Tried to uninstall and reinstall the drivers...Hello
I guess this problem is new and you were able to burn and play media in the past
So everything looks like a hardware fault and replace the drive seem to be absolutely necessary.But have you tested several media? Have you tried to burn the CD or DVD with software like Nero? The RecordNow is not my favorite.
You said
> Have tried to uninstall and reinstall the drivers
Can I ask how did you that? The CD/DVD drive using the common Windows driver and it s not necessary to install additional drivers.
By the way; you won't find any special drivers designed for the CD/DVD drive.However, please also check if this Microsoft solution can help you:
http://support.Microsoft.com/kb/314060 -
Tecra A8: Mat * un DVD - Ram UJ - 841 s is not read / burn any disc
Hi all
I have a laptop Tecra A8 with Mat * un DVD - Ram UJ - 841 s. This device is not read / burn any disc. However, Mat * one bed the recovery CD at startup.
I tried everything: I deleted the registry entries (lower and upper), I uninstalled Ant again once the driver installed... but it doesn't work. Any help?
Best regards
Ribera.
Hello
In addition to the fact that you can boot from the Toshiba Recovery CD, I think that it s a problem of training material
I think it's a matter of calibration of lens readers possibly the lens can not calibrate correctly in the right position of s, and this is why the drive can't handle the inserted media.This could be the worst case, because this fault is repairable by replacing the drive.
-
Need firmware for Mat * a DVD - RAM UJ - 841S to make the region free
Can someone help me as where to find a Firmware for Mat * a DVD - RAM UJ - 841-S, the,(MTFOPD-01170000-UN.exe) one i found is for another laptop.
I need to be able to watch the region 1 and 2 because of me travel and the number of these two that I own.
I have three options.
1. install a new drive.
2 use an external hard drive
Firmware 3.The latest is the one I prefer.
Can someone help me.Hello
Sorry, but the firmware update will not remove the DVD region lock.
The fact is that you can change 5 times this option, then the option is locked and it of not possible to change it.
Unfortunately, there is nothing to see!If you wish, you can consult this announcement:
http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=10828 -
Satellite A100: Mat * a DVD - RAM UJ - 841S will not play modern DVD
It's weird, music CD's fine, game DVD and data DVDs no problem but if I want to watch a recent movie, my dvd drive is disabled. What a weird copy protection? I bought this partially to watch movies when the main TV set wasn't available and I feel ripped off the coast. Old DVDs are fine (the monster inc etc). Work on this late nights trying to see what is wrong. The DVD even work on my friends mac so I don't understand. He believes that it is a windows thing done on purpose.
Help!
Date 2007-01-14 15:22:54
[Information on PC]
Model name Satellite A100
Part number PSAA9A-118038
Serial number X6453812Q
Version of the OS Microsoft Windows XP Professional 5.1.2600 Service Pack 2
BIOS Version 2.00
Processor Genuine Intel(r) CPU T2250 1.73 GHz
RAM 1024MB of physical memory
Disk capacity hard 100,027,630,080 [bytes] 93.158 [GB]
Capacity of the hard drive space free 91,356,422,144 [bytes] 85.082 [GB]
Video NVIDIA GeForce Go 7300 version = 8.4.6.8
Screen resolution 1280 x 800 Pixels
Color quality, true color (32 bit)
Audio version of Realtek High Definition Audio = 5.10.0.5200
Version of Intel (r) PRO/1000 PL Network Connection Network 9.2.24.0 = 00:A0:D1:4 B = MAC address: 59:40
Intel (r) PRO/Wireless 3945ABG Network Connection version = 10.1.0.13 = MAC address
TOSHIBA Software Modem Modem version = 2.1.62.0
IDE Device 1 HTS541010G9SA00
Interface IDE 2 no
IDE Device 3 MAST * A DVD-RAM UJ - 841S FW version = 1.60
Interface IDE 4 no
Interface IDE 5 no
Interface IDE 6 no
Internet Explorer 7.0.5730.11EC/KBC Version «»
PS-MICOM Version «»[Information QFE]
Windows Update "KB873333.
Windows Update "KB873339.
Windows Update "KB884018".
Windows Update "KB885250.
Windows Update "KB885835.
Windows Update "KB885836.
Windows Update "KB885855".
Windows Update "KB886185.
Windows Update "KB887472.
Windows Update "KB888111WXPSP2".
Windows Update "KB888113.
Windows Update "KB888302.
Windows Update "KB889673.
Windows Update "KB890046.
Windows Update "KB890175.
Windows Update "KB890859.
Windows Update "KB891781.
Windows Update "KB893056".
Windows Update "KB893066.
Windows Update "KB893357.
Windows Update "KB893756.
Windows Update "KB893803v2.
Windows Update "KB894391.
Windows Update "KB894871".
Windows Update "KB895200".
Windows Update "KB896256.
Windows Update "KB896358.
Windows Update "KB896422.
Windows Update "KB896423.
Windows Update "KB896424.
Windows Update "KB896428.
Windows Update "KB896688.
Windows Update "KB898461.
Windows Update "KB899587.
Windows Update "KB899589.
Windows Update "KB899591.
Windows Update "KB900485.
Windows Update "KB900725.
Windows Update "KB901017.
Windows Update "KB901214.
Windows Update "KB902400.
Windows Update "KB904706.
Windows Update "KB904942.
Windows Update "KB905414.
Windows Update "KB905749.
Windows Update "KB908519.
Windows Update "KB908531.
Windows Update "KB910437.
Windows Update "KB911280.
Windows Update "KB911562.
Windows Update "KB911564.
Windows Update "KB911927.
Windows Update "KB912919.
Windows Update "KB912945".
Windows Update "KB913580.
Windows Update "KB914388.
Windows Update "KB914389.
Windows Update "KB914440.
Windows Update "KB915865.
Windows Update "KB916595.
Windows Update "KB917344.
Windows Update "KB917422.
Windows Update "KB917734_WMP10.
Windows Update "KB917953.
Windows Update "KB918439.
Windows Update "KB919007.
Windows Update "KB920213.
Windows Update "KB920670.
Windows Update "KB920683.
Windows Update "KB920685.
Windows Update "KB920872.
Windows Update "KB921398.
Windows Update "KB922582.
Windows Update "KB922616.
Windows Update "KB922819.
Windows Update "KB923191.
Windows Update "KB923414.
Windows Update "KB923689.
Windows Update "KB923694.
Windows Update "KB923980.
Windows Update "KB924191.
Windows Update "KB924270.
Windows Update "KB924496.
Windows Update "KB925398_WMP64".
Windows Update "KB925454.
Windows Update "KB926239".
Windows Update "KB926255.
Windows Update "KB928388.
Windows Update "KB929120.
Windows Update "KB929969.
Windows Update 'Q147222 '.CD/DVD TEST (D:\) PLAYER MADE FAIL
Could you tell us what films (title), you have a problem with?
Perhaps you have trouble with the more recent Double-Layer (9 GB) DVD.Of course, it may be a copy protection, too cause some movies using a very unusual way to make sure that they play on a "locked region" disc.
Using any software on your laptop that are able to "Rip" or "simulate" a DVD? If so, that the existence of such software could prevent the normal functioning of the specific movie titlesMany films are also not not not to work on the readers of 'Region free '. These DVD movies check if your player is able to play a 'region' that is different than the current DVD that plays, and if they do, they will not start.
Give us some comments over on that and perhaps we can find the reason for your question.
Concerning
chain
-
Satellite P10 problems with Mat * a DVD ROM
Hello
I have a problem with my P10,
I bought it for 2 months and 4 months ago my
Carpet * a DVD ROM does strange things.
When I try to copy a CD for example, it reads the cd source, after I put in those recordable, it starts to burn and suddenly it stops, says ERROR (Event Viewer: error on Controller\Dev01\CD-ROM) and my Combo drive is presented as a 'simple' DVD - RAM on Solution Explorer drive.Sometimes it won't read movies on DVD or CD so I have
to restart the P10 and generally it can read the disks after that.
So is my faulty drive, the card mother or just me?
Have been looking for a new driver, but there is just a
DVD-RAM, no driver for the drive itself.Hello
Maybe the contact of the cable to the controller and CD player is loose. The error message said you it should be good!
Your P10 is under warranty so bring a call Toshiba and it need to be repaired or a Service partner!
Hans Bye
-
Equium A100-549: Mat * un DVD - Ram UJ - 841 s is not accessible
Hello
I have read many topics all about problems with this unit, makes me regret buying the laptop, but for now, I'll have to try to fix it. My DVD device, I cannot access it if I put in a blank DVD or CD-ROM drive. When I click on the camera by computer or of the auto run pop-up menu, an error message appears saying "D: is not accessible incorrect function". If I insert a disk with some data on it it reads it quiet easily (DVD and CD-ROM of so it's not the calibrator laser). After reading works around the problem, I did the following:--First I tried accessing the page of toshiba and reloading the drivers, without success
-J' the continuation of many shooters of boredom, unsuccessfully tried
-J' even tried formatting my laptop and reinstall windows (incidentally this violates my warranty and insurance?) and subsiquently once again, without success drivers
I need help, and not only its desperate thank you very much!
Hi André,.
First, reinstall your system from the recovery CD will affect your insurance or guarantee. You can reinstall as often as you want.
As for you problem with your optical drive, the first thing to check is that the option "Enable the Reording CD on this drive" is checked in the properties of the device option. Just right click on your optical drive in ' my computer and then select Properties option then the "recording" tab
Finally, you shouldn't have to download all the drivers for your scanner, Microsoft base drivers are generally quite adequate. Usually, the drivers of Toshiba DVD-RAM support formatting of re = writeable disks and not the functioning of the drive itself.
Kind regards
-
Re: Need latest driver for Mat * a DVD - RAM UJ - 841S
Hello
I have an Equium M50-192. I think that there is a problem with the drive. It can read CD/DVD, but does not recognize it as a DVD RW. Can any body point me to the latest version of the driver.
Thank youAndy
Hello Andy
Sorry, but your description of the problem is a bit confusing to me. What do you mean exactly? According to the specifications of your laptop should have DVD Super-Multi drive (+ R) double layer. This means that you should be able to burn DVD-R/RW with no problems.
You mean that you can't burn data or movies on blank media DVD - RW or DVD - RW media is not readable?
By the way: separate for ODD driver is not available.
-
Re: Satellite A100-955: I need a firmware for Mat * a DVD - RAM UJ - 841S
Hello!
I have a Satellite A100-955, and I need a firmware for my CD/DVD drive.
It works fine and bad in different times.
My current version is 1.60. I can't find an update anywhere! Or at least the same firmware...I can't find it on CPR1, I can't find it on the Web from Panasonic website. Help!
Hello
I checked the Toshiba page and there is no updated firmware for this CURIOUS.
Usually if you have some problems with reading or writing to the disks, then this means that the STRANGE beginning of malfunctions and no update firmware could help.
Perhaps the drive's laser lens is not ok this happens after a long period of use.Maybe you can try to clean the lens with the help of alcohol and lint.
If that does not help, then you should try different discs from different manufacturers
And the last option could be replacement drive. -
Problem with MAT * a feature UJ - 831S on Satellite M40-232
Hello
I have a problem with the CARPET * a DVD-RAM UJ - 831S (firmaware 1.40 / Microsoft 5.1.2535.0 driver) installed on an M40-232... reading and writing on CD - R, CD - RW, DVD - R, DVD - RW does not work.
If I use an original disc it works well (for example, music, and movies on CD and DVD software)Any idea on the problem?
Thank you
AlbertoHi Alberto
In my opinion, this question needs complex test procedure and if you hope to have a quick fix and easy you are wrong.
No one knows which blank media you are using. Is it some without name or product of high quality, what type of data is stored on writable media, record the option is enabled, you have tested with burning as NERO software and so on.At the end you can backup all your data and install OS using delivered the recovery media. If the problem persists, it may be hardware problem.
Sorry, but it's really not easy to give a precise diagnosis here.
-
How can I make the DVD drive Mat * une Région UJ - 841S (Satellite M70) free?
Hello
I spent hours and hours trying to remove my car DVD DVD regional code Mat * a UJ - 841 S on Toshiba Satellite M70-204.
I checked on various forums and asked a lot of people in the stores...
Nobody gave me a hint to this topic...
Can you please help?
I often watch DVDs from various regions for my course!Hello
The same topic a few days ago http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10828&messageID=38935#38935
Check it!
-
Re: Mat * a DVD - RAM UJ - 841 S DVD does not close on Satellite M70 - 164
Hello
A DVD has been badly inserted in the neoconservative DVD player open it via the Open button, having to resort to the emergency of trombone solution.
Now, the player does not close.
Any suggestions?
Should I replace?
Best regardsHello
> A DVD was badly inserted in the DVD player neoconservative it open via the button open
In my opinion the wrong disc was the STRANGE. Possibly mechanical parts few are not ok.
I think that the STRANGE must be replaced and in my opinion he s the one and the only solution.Welcome them
-
Satellite M55-S325 DVD write error (MAT * a DVD - RAM UJ-years 840)
Hi all
I have a Satellite M55-S325 with MAT * A DVD - RAM UJ-years 840 Firmware Version 1.52 I bought States 5 months ago, everything seemed fine until a few weeks ago when I tried to write some data DVD, I had unrecoverable errors while writing the DVD using NERO 7 ULTRA EDITION, but now I get this messege all the time and I'm not able to write any DVD the disc seems to be well in CD writing. I tried to use recording SOUND now that comes with the laptop, no luck. I tried to reduce the size of the files, and try with lower write speeds but still no luck. I disabled burning CD of the Windows XP SP2 IMAPI burning service COM as well. I use a good quality DVD-R that worked fine before. I would appreciate your help because my HDD is almost full (but still 10 GB of free space) and I need to get a backup of my data.
Here is the log of my last attempt in writing, file a NERO DVD:1C82-0010-8011-0000-1454-2737-5268
Windows XP 5.1
IA32
WinAspi: -.
Ahead WinASPI: file 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver = 2.0.1.74, size = 164112 bytes, created 02/11/2004 13:54:32NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2Recorder:
Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
Adapter driver:HA 1
Drive buffer: 2048kB
Bus type: default (0)-> ATAPI, detected:?
CD-ROM:Version: 1.52 - HA 1 YOUR 0 - 7.0.1.2
Adapter driver:HA 1 = Scsi-device-map =.
DiskPeripheral: TOSHIBA MK1032GAX atapi Port 0 ID 0 DMA: on
CdRomPeripheral: MAST * A DVD - RAM UJ-years 840 atapi Port 1 ID 0 DMA: on= CDRom-Device-map =.
CARPET * a DVD - RAM UJ-years 840 D: CDRom0
=======================AutoRun: 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) bytes
ShowDrvBufStat: 1
BUFE: 0
Physical memory: 502 MB (514480 KB)
Free physical memory: 160MO (164772kB)
Memory in use: 67%
QUERIES PFiles: 0x0
Use consultation: 1
Global Bus type: default (0)
Control supported media: disabled (0)14.5.2006
Compilation ISO
15:18:55 #1 text 0 file Isodoc.cpp, line 6411
ISO document burn settings
------------------------------------------
Determine maximum speed: FALSE
Simulate: FALSE
Write: TRUE
Finalize the CD: REAL
Multisession: FALSE
Burning mode: DAO
Mode : 1
: ISO 2 (31 characters)
Character set: ISO 9660
Joliet: TRUE
Allow pathdepth more than 8 directories: TRUE
Allow more than 255 characters in path: TRUE
Write ISO9660; 1 file extensions: TRUE15:18:55 #2 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of memory15:18:55 #3 text 0 file Reader.cpp, line 124
Player running15:18:55 #4 text 0 file Writer.cpp, line 113
Writer D: MAST * A DVD - RAM UJ-race years 84015:18:55 ISO9660GEN #5-11 file Geniso.cpp, line 3312
First address writeable = 0 (0x00000000)15:18:56 #6 text 0 file Burncd.cpp, line 3302
Turn on Disc-At-Once, using DVD media15:18:56 #7 Text 0 File DlgWaitCD.cpp, line 279
Last possible write address on media: 2295103 (510:01.28, 4482 MB)
Last address to be written: 2288159 (508:28.59, 4469 MB)15:18:56 #8 Text 0 File DlgWaitCD.cpp, line 291
Write in overburning mode: No. (enabled: CD)15:18:56 #9 Text 0 File DlgWaitCD.cpp, line 2578
Recorder: MAT * a DVD - RAM UJ-years 840, media type: DVD + R
Disc manufacturer ID: MBIPG101, media Type of ID: R04, product revision number: 1
Disc Application code: 0, extended information indicators: 315:18:56 #10 Text 0 File DlgWaitCD.cpp, line 458
> Protocol of DlgWaitCD activities:
=========================================15:18:56 #11 text 0 file ThreadedTransferInterface.cpp, line 847
CIS (after recorder preparation)
0: TRM_DATA_MODE1)
2 indices, index0 (150) not provided
#0 + 2288160 (2288160) original disc POS = #2288160 / 508:28.60
relocatable, pos to drive for the cache-write implementation not required / not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2288160 blocks [D: MAST * a DVD - RAM UJ-years 840]
--------------------------------------------------------------15:18:56 #12 text 0 file ThreadedTransferInterface.cpp, line 1059
Prepare recorder [D: MAST * a DVD - RAM UJ-years 840] for write in CUE-sheet-DAO
DAO infos:
==========
MCN:
TOCType: 0x00; Session closed, fixed disk
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0 x 00, FilePos 0 0 4686151680, ISRC ""
Introduction DAO:
===========
__Start_ | ___Track_ | _Idx_ | _CtrlAdr_ | _RecDep___ _
0 | Lead-in | 0 | 0x41. 0x00
0 | 1. 0 | 0x41. 0x00
0 | 1. 1. 0x41. 0x00
2288160 | Lead-out | 1. 0x41. 0x0015:18:56 #13 text 0 file SCSIPassThrough.cpp, line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME15:18:56 #14 phase 24 file dlgbrnst.cpp, line 1725
Caching of files started15:18:56 #15 text 0 file Burncd.cpp, line 4132
Cache writing successful.15:18:56 #16 phase 25 file dlgbrnst.cpp, line 1725
Caching of files completed15:18:56 #17 phase 36 file dlgbrnst.cpp, line 1725
Burn process started at 8 x (11 080 KB/s)15:18:56 #18 text 0 file ThreadedTransferInterface.cpp, line 2685
Check position of the point disk 0 (relocatable, disc pos, no patch, orig to #0 info): write to #015:18:56 #19 text 0 file Cdrdrv.cpp, line 8411
-A DVD structure: physical Format information (00 h).
Layer: 0, address: 0 (0 h), AGID: 0; Length: 2050
Book type: DVD + R (10), part Version: 1.0 x (1)
Disc size: 120 mm, maximum speed:(h F)
Number of layers: 1, track path: path of the parallel runway (PTP), layer Type: recordable
Linear mass: 0,267 um/bit, track density: 0.74 um/track
Starting the number of physical sector of data area: 30000 h (DVD-ROM, DVD-R /-RW, DVD + R / + RW)
End number of physical sector of data area: 26053F h
End sector number in layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
There is no data in Burst cutting area (BCA)
Disc Application code: 0 / 0 h
Scope of Information indicators: 3 h
Disc manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of bytes to use physical format information in ADIP up to byte 63:56
Particular media [16.63]:
00 00 03 4 42 49 50 47 - 31 30 31 52 30 34 01 38... MBIPG101R04.8
23 54 37 12 02 42 6 02 - A8 6 B 15 15 0 B 0 B 08 08 #T7. BN... k...
01-19-1 B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00...15:18:56 #20 text 0 file DVDPlusRW.cpp, line 666
Begin to write his address to the LBA 0
Mode high compatibility DVD: Yes15:20:47 #21 SPTI-1128 file SCSIPassThrough.cpp, line 323
D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1128)
Key: 0x03 (KEY_MEDIUM_ERROR)
Printing Code: 0x11
Meaning of Qual: 0x00
The CDB data: 0x2A 00 00 00 03 00 00 00 20 00 00 00
Sense area: 0xF1 00 03 00 00 00 00 0 a 00 00 00 00 11
Buffer x05e50000: Len x 10000
0 X 40 86 AB A0 6 B 93 01 4F 75 2 A 54 25 B7 F6 D3 E5
0XA9 FC 97 DF 55 73 64 2 AA AF 96 7 D B8 4 C 7 C 66
0XC1 9TH C1 FF FF 55 59 DB 08 65 CB 6 CA B9 0C HAS 2 B15:20:47 am #22 RDC-1128 file Writer.cpp, line 302
Unrecoverable read error
D: MAST * A DVD - RAM UJ-YEARS 84015:20:47 #23 text 0 file ThreadedTransfer.cpp, line 228
all writers idle, stopping conversion15:20:54 #24 text 0 file ThreadedTransfer.cpp, line 222
conversion idle, stopping reader15:20:57 #25 SPTI-1106 file SCSIPassThrough.cpp, line 323
D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
The CDB data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 0315:20:57 #26 SPTI-1106 file SCSIPassThrough.cpp, line 323
D: CdRom0: SCSIStatus (x 02) WinError (0) NeroError(-1106)
Key: 0x03 (KEY_MEDIUM_ERROR)
Detect Code: 0 x 73
Meaning of Qual: 0x03
The CDB data: 0x5B 01 05 00 00 00 00 00 00 00 00 00
Sense area: 0 x 70 00 03 00 00 00 00 0 to 00 00 00 00 73 0315:20:57 #27 phase 127 file dlgbrnst.cpp, line 1725
Generating borders high compatibility DVD15:20:57 #28 phase 129 file dlgbrnst.cpp, line 1725
Production DVD borders completed successfully15:20:57 #29 phase 38 file dlgbrnst.cpp, line 1725
Burn process failed at 8 x (11 080 KB/s)Existing drivers:
File ' Drivers\CDRALW2K. SYS: Ver = 6.2.0.132, size = 24698 bytes, created 23/10/2003 04:15:02
File ' Drivers\PXHELP20. SYS: Ver = 2.03.28a, size = 20640 bytes, created 05/31/2005 23:36:01 (Prassi/Veritas driver for win 2 K)Registry keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs: 0 (Security Option)Hello
I can't find any strange or mysterious messages in the log file.
You suggested that the drive can burn CDs but not DVDs.
The calibration lens dysfunction is sometimes responsible for these issues.
Unfortunately, I have no solution for this problem. The replacement drive must resolve.
The unit is fairly new in this case, you should ask for help ASP. -
DVD writing error Mat * a DVD - RAM UJ-850 s on Satellite L30-113
I have Toshiba Satellite L30-113 psl33 with Mat * a DVD - RAM UJ - 850 s. operating system is Windows XP SP2.
This drive read and write CDs, play DVDs, but don't write DVD the last time.
After inserting DVD the status of the device in 'My computer' change to 'DVD RAM' on 'CD RAM.
After the attempt to write, the errors are "Gage power error" and "not full disk at a time.Writing at the beginning of the DVD is OK.
In your opinion, is it soft or hard error?
Must I update DVD-driver or the replacement of the DVD player?Hello
> I need I update DVD-driver or the replacement of the DVD player?
Usually the ODD driver is part of the Windows operating system.
Windows uses the internal Microsoft driver that controls the ODD.In any case, the European driver Toshiba page contains a DVD - RAM driver. This driver gives you more support for your DVD RAM drive.
I m not very good if it will help you, but try to reinstall and check if the drive will be CD - RAM DVD-RAMSee you soon
Maybe you are looking for
-
Haven't used my iPod touch in a long time and now I can't connect to the internet. What can I do?
-
Repair the installation in Windows XP safe mode: Posible?
Nice day I'm working on my computer that has Windows XP Professional, after having removed the old version of Norton 360 and reinstalled the One updated. My computer keeps restarting every 2 seconds in Normal mode. I can boot into safe mode and safem
-
I just upgraded my latest e280 v2 to the new firmware and wish I didn't - is it possible to come back? (I tried a search in the forum first, with inconclusive results.) The reason why I don't like, is that when the Sansa stereo dock, it will now sta
-
My cat has turned off the touchpad on my laptop. How do I turn it back on?
He jumped on the keyboard and turns off the touchpad. He has done it before and I was somehow able to put on the. I forgot how. I now use mouse and don't like it.
-
Microsoft updates to lose my precious morning
So I get up early, getting to work more early in order to catch up with other developers. I opened my computer n tells me there are important updates. There is no option to cancel so I continue. It's 07:30. I have 82 important updates. They run for a