Repair the installation in Windows XP safe mode: Posible?

Similar Questions

• Can't install Itunes, get an error that the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode"

  OP: Install problems Windows

  I tried to install iTunes, but he said that "the Windows Installer Service could not be accessed. This can occur if you are running Windows in safe mode or if Windows Installer is not installed properly. Call support personnel. "They gave me similar messages by other programs I've tried to install as well.

  Because I was not running Windows in safe mode in time, I assumed that the installer was not installed correctly. So I tried to download from here: http://www.microsoft.com/downloads/en/details.aspx?familyid=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  But then I got error messages like "this update does not apply to your system" and "not enough memory is available to process this command." I tried all the links and none of them worked for me. I'm running a Vista Home Premium 64 bit, and I 2.38 GB of available RAM, so I don't think that the lack of memory is the problem here. What should I do?

  1.] I had a previous version of iTunes, but I got rid of it with Revo Uninstaller.

  I was looking around and I found this: http://www.vistax64.com/vista-installation-setup/96680-repair-windows-installer-service-vista-all-versions-2.html

  I followed the direction of the last message (by F'n Vista) and changed the value of WOW64 Registry and now iTunes has installed perfectly and works now. I'll try to install other programs that I got hurt with previously. Thank you very much for your help! :)

• New installation of Windows 7 translates speeds very slow of the internet. Works in safe mode.

  3 weeks ago, I installed windows 7.

  For some reason, internet is super slow. I noticed right away because the download of the updates took forever. I thought it was because I need to install the NIC drivers, so I only have the first. It didn't fix it. Then, I searched and tried everything I could find online. The only thing that did work was that if I boot mode safe mode with network speed is very well .

  When I discovered that, in safe mode, everything was fine, that I started to disable any service that relates to networking. (As the Base and support Ip filtering engine, etc) This does not solve it so I decided to try the oppisite I started in safe mode with network and then loaded to the top of msconfig and any service that was not running in safe mode, I turned off. Thinking that I start one by one and find out what service was slowing downloads. When I booted in normal mode, the download speeds were still broken.

  So I continued then to disable services, I disabled all services which have to do with networking, and to enable windows.  (Things like the service that launches programs. Yes, any program that has not been opened I could not open.) Accordingly, I have concluded that it was not all services.

  This is a new installation, so I only installed firefox and flash. (no flash for the speed test) no anti-virus, etc.

  Here are a few screens of speed trials. These are actually kind of funny because the download is so fast that downloads.

  It is in safe mode with network speed. http://imgur.com/7VJvt

  It's the speedtest in normal mode, http://imgur.com/dDp5B

  So here's what I tried.

  • disabled auto-tuning
  • disabled IPv6
  • turned off homegroup
  • reinstalled drivers
  • drivers uninstalled (for default windows drivers)
  • Install different drivers (installed a game on the asus site) and the other on the nvidia site
  • disabled many services to many-on-list really out.
  • disabled Windows defender and windows firewall.
  • I bought new RAM with the win7 update so I tested to see if the RAM was bad. I ran Memtest86 + and it failed. So I took the new RAM and he run and all past. Still doesn't solve it.
  • I reinstalled.
  • I installed another network card.
  • I installed another version of Win 7. (Installed Win7 professional first and after Win7 Ultimate)
  • reinstalled the drivers again.
  • Disable all of the services.
  • A run anti-virus programs. To make sure that there are no viruses. There are not.
  • I connected directly to my router.
  • All the latest windows updates installed.
  • Checked online to see if my hardware is compatible with Win7 http://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=ASUS%20P5N-D%20ATX%20-%20nForce%20750i%20SLI%20Motherboard&v=ASUS&uid=P5N-D%20BULK&l=en-US&pf=0&pi=0&s=P5N-D&os=64-bit
  • Made sure my router had the latest version of the firmware. There not then I upgraded to V1.9 and it has not solved the problem.

  Here is some information on my hardware.

  Processor: Intel (r) Core (TM) 2 CPU Quad Q9400 clocked at 2.66 GHz, Intel64 family 6 model 23 Stepping 10

  Number of processors: 4

  RAM: 4 000 MB

  Graphics card: Standard VGA Graphics adapt, 5 MB (have not installed my NVidia 460 drivers yet.

  Hard disks: C: Total - Mo 476929, Free - Mo 454276; Total D: - Mo 194466, Free - 20325 MB;

  Motherboard: ASUSTeK Computer Inc., P5N - D, 1. XX, 123456789000 (NVIDIA nForce 750i SLI)http://www.newegg.com/Product/Product.aspx?Item=N82E16813131232

  NETWORK card: NVidia nForce 10/100/1000 Mbit / s

  Antivirus: no

  Router: D-Link DGL-4300

  I asked the guys more Hotmail.com for help. Here is the result. http://forums.techguy.org/Windows-7/975115-Windows-7-fresh-install-results.html

  So I pray that you guys can help me with this. I have no idea what to do next. Help, please.

  Thank you.

  FIXED!

  So I gave up and gave my computer to my friend at home and take a look. He brought me.

  What did do? He went out and bought a new network card. I guess that despite the windows NETWORK card drivers 7 I installed windows for some reason any dislikes the network card. (NVidia nForce 10/100/1000 Mbit / s) It is built in the nice for the card mother P5N - D.

  The funny thing is that 3 1/2 weeks, when I had the problem. I asked him what he thought and he said to go out and buy a new network card. When I hesitated to do so, he said he would buy the NIC if it did not work.

  In any case, I hope this helps someone maybe who has the same problem, I did.

• How can I start windows in safe mode if I have the error status code 2000-142 7?

  I NEED TO KNOW HOW TO START WINDOWS IN SAFE MODE, I CAN GO TO THE INSTALLATION PAGE BUT ONLY THEN, HOW I START ON SAFE MODE?

  Hello

  Looks like your hard drive is defective or has failed.

  Use the following steps to confirm that.

  Hard drive:

  Go to the website of your computer manufacturer > find specifications of hardware in your computer (hard drive) > access the Web Hard Drive from the manufacturer site > download their diagnostic software > make a Bootable disc > test your hard drive.

  See you soon.

• I can connect with the Administrators account without starting windows in safe mode in win xp pro sp3

  I can connect with the Administrators account without starting windows in safe mode and if yes, how?

  If I ca not, how can I load the graphics in safe mode drivers as all graphical interfaces are not displayed correctly.

  Thank you, Andre

  If XP Pro using the Welcome screen, press CTRL + ALT + DELETE to bring up the classic login box.  In the connection box, type the administrator user name and password. Boulder computer Maven
  Most Microsoft Valuable Professional

• Windows Vista hangs after choosing the identity of the connection. works well in safe mode

  I was able to start windows in safe mode, and then create a new connection profile.  However, Windows doesn't always starts normally.  Using the original profile causes the screen to go black after the "Welcome" screen  Using the new profile causes the screen to go to blue after the Welcome screen.  It's a laptop with nothing fixed.  everything seems to work fine in safe mode, so I think it's a matter of profile.  There is no restore points, so I can't use system restore.  Any thoughts?

  Bob J

  Hello Ripplemaker1,

  I have to agree. This sounds like it may be some kind of malware in game.

  I recommend you create a new thread in the forum security, privacy, and user accounts for this piece of the puzzle.

  Best regards

  Matthew_Ha

• After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  After the installation of Windows 7 repair I 219 updates. Best way to install? Small batches... oldest first? Others?

  In the previous 18 months there have been many updates toxic that caused problems... these fixes are well eliminated or fixed retroactively or this process will be as walk minefield?

  I currently intend to install some office and .net updates separately and to wait on the optional updates updates security priority are installed.

  Thanks for any idea.

  Properly installed all updates of security except IE11 upgrade [has a full update of IE8 that should cover most security problems... [Since I use Firefox... or whatever it is, but it is to say... no biggie].

  I installed the updates [ie8, etc] 1 security and updates in batches of 20-30 for most recent first then older then. Then I installed the office updates and then a point net 3.51.research showed several versions of dot net needed.

  After each batch, I did a restore pt.

  Note: this repair facility corrected a connection problem that prevented programs and 32-bit browsers... including malwarebytes to connect to the net. I had followed the many expert suggestions to fix this problem without success before the repair facility.

• Monitor goes into sleep mode during the installation of Windows 7

  Hello, I'm doing a new install of Windows 7 pro on a new SSD. He gets regarding to reset for the second time during the installation, and just before showing the page where you name the computer and configure user accounts, the monitor goes to sleep and won't return. only way to recover is to reset the machine, only to do exactly the same thing again. Anyone know what could be the cause? I used the same disk of windows for many expenses format / install Windows after hardware upgrades in the past and this has never happened before. Can provide the complete specifications of the system if necessary. Help, please!

  Hi Danpedro,

  I see that the screen goes into sleep mode, in the last step of installing Windows 7. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. you have an external display driver card attached to the motherboard?

  3. you format the hard disk during Windows 7 installation?

  Method 1.

  Disconnect any external devices and restart the computer to see if it helps complete the installation of Windows 7.

  Method 2.

  If you have a driver to attached external display card, then you can disable this external driver in the BIOS and check if that helps complete the installation of Windows 7.

  Warning of the BIOS:

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Leave Windows Vista Safe Mode

  I used Norton Anti Virus to get rid of the 27 viruses on my computer.  I ran Norton in safe mode, and it got rid of all viruses.  However, now when I start the computer, it always starts in SafeMode even after several reboots.  I don't have the Windows Vista disk I can't do a system restore.  Anyone know how I can get out of safe mode?  Also, I don't know the administrator password.

  You can do a restore of the system in safe mode, but you would have to return the territory of Malware.

  You talk about a resumption of Systerm; read part 2.

  http://www.bleepingcomputer.com/tutorials/tutorial61.html#Vista

  Table of contents > Vista.

  I changed it the way to get into Safe Mode:

  1. Close all running programs and open the windows if you are back on the desktop.
  2. Click on the Start () button.
  3. In the search box of the Start Menu () type msconfig and press enter on your keyboard.
  4. The System Configuration utility will open and you will see a screen similar to the one below.

     
     Figure 8. Vista System Configuration utility

     Click the Startup tab.

  5. You will now be on the screen start as shown below options.

     
     Figure 9. Tab of Vista startup in the System Configuration utility

     UNCHECK the box labeled Start secure

  6. Press the apply button and then press the OK button.
  7. Now, you will see a prompt stating that you must restart the computer to apply the change.

     
     Figure 10. Reboot prompt

     Click the restart button to restart your computer.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• failure of the system after the installation of windows 7 upgrade advisor

  original title: failure of the system after the installation of the Advisor to upgrade to windows 7, which now, I can't delete

  My Winows Vista worked fine until I downloaded the windows 7 upgrade advisor - the system crashed, only load windows in safe mode, and when I try to delete the Upgrade Advisor program, it tells me windows service install is not available...

  Follow these steps to try to solve your problems of boot.

   

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  .

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• ITunes does not start after the installation of Windows 10

  ITunes does not start after the installation of Windows 10, 1511 version (OS Build 10586.164). ITunes version 12.3.2.35, 6 GB RAM, Intel i3 @3.3 GHz. Itunes and Ipodserver module will run by Manager jobs, but Itunes does not open. iTunes starts in SafeMode as explained in the link below (hold SHIFT and control on your keyboard while you open iTunes).

  Fix unexpectedly closes or problems of launch in iTunes for Windows - Apple Support

  Solution, according to this link, is:

  If the problem does not occur in Mode safe, remove any third party plug-ins iTunes: solving problems with third party plug-ins - Support Apple iTunes but the link has been archived, and I can't find any plug-ins installed iTunes. Any other ideas?

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• How to enable Media Player in Windows XP safe mode

  Does anyone know how to enable Windows Media Player in Windows XP safe mode? I sound activated in safe mode but Windows Media Player does not work, it will not only open and there's nothing in Task Manager which shows that it is running in the processes list. It depend on what services? Media Player works fine in normal mode, but only in safe mode.

  Any suggestion would be appreciated

  Hello Victor,.

  I don't think that it is possible to get Windows Media Player to work in Mode safe as it does start normally.
  I suggest that you work on the main problem which is screening at the blue start of your machine. I suggest you post a thread on our repair system and the recovery location here:
  http://answers.Microsoft.com/en-us/Windows/forum/system?page=1&tab=no

• What can I do to correct a startup problem that has begun to occur immediately after the installation of windows updates today? I was about to save some work but ran the updates before hand

  I have just to complete installation of updates on my compaq presario sr2037x... and when it restarted it goes to the ' start windows normally, safe mode, safe mode w/network, w/command prompt safemode and the last known good configuration "screen... I tried to start windows normally, then the last known good configuration and not matter what I do it looks like its about to start up, then a brief blue screen flashes then I finish immediately at the start screen mode to choose.

  BSoD on my xp. Thank you microsoft. No problem until your update. You are the people going to do about it? Does not load in any case, in any case.

  STOP: 0X000000E3 (0X80558BE0, 0X81B4B020, 0X00000000, 0X00000002)

  Found this by searching. don't know if it will work again. This update might be the problem. KB971486

  Link here.  http://www.stateofthetech.com/?p=117

  Read on to find some easier ways to fix. Now, I must go and get a record of Microsofts problem!

• Windows xp freezes for a long time during the installation of Windows Update.

  Original title: xp freeze during an update... what to do

  I turned on my computer for the first time in 10 days. When stop he went in update mode (21 updates) and was 19, since yesterday evening around 20:00 is this normal and if not what is my next step since he says do not close during an update?

  Hi MarcyDowning,

  If the update is blocked for hours, then you can try to restart the computer and check if it starts in normal mode.

  If not, then try to start in safe mode and try to perform a system restore:

  Step 1:

  You can check the article to start in safe mode:

  A description of the options to start in Windows XP Mode

  Step 2:

  If you are able to boot into safe mode, and then try to perform a system restore and check if you are able to boot into normal mode:

  How to restore Windows XP to a previous state

  Note: When safe mode system restore, system restore points are deleted.

  Once you are able to boot into normal mode, you can try to install the updates in batches containing updates 4 or 5 at a time and check if it helps.

  For more information, see the article:

  Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services

• Download Windows 10 Windows 7 safe mode

  My laptop Lenovo starts only in Safe Mode; I have Windows 7 installed and updated.  This afternoon he stops suddenly and will now start safe mode, no matter what I do, including restoring to a previous restore point. I run anti-malware and antivirus scans, and everything was reported to be good.  My question is this: can I download 10 Windows in safe mode of Windows 7?

  You can not run the upgrade in Safe Mode and wouldn't take the risk from corruption in the new OS even when.

  But you can create support Installation Windows 10 and then make superior Clean install Windows 10 Upgrade, because any day now, a new Version will be pushed through Windows Update that enables directly with the old OS key product.  Windows fall 10 day set for November release

  Remember when installing kickoff to delete all partitions to make it cleaner, as shown in the Wiki.   Feel free to ask questions in return.