Problem with modifier keys 'Post-it '?

Similar Questions

• SideWinder X 6 problems with certain keys

  Hey, I have a new sidewinder x 6 and it was send me problems with some keys. Whenver I want to press 'e' or 'v' (and perhaps others, but those are the ones that I noticed to be more frequent) I sometimes have to press several times on it or it will not be saved.  This problem started yesterday and its getting boring.

  I love my Sidewinder and I wouldn't go back to a normal keyboard
  Please any ideas would help!

  LD49,
  I know you said that you used canned air to blow out the keyboard, but have you tried turning upside down and tapping gently on the bottom to see if something grave?  The keys you are having issues with that are all in the same general area of the keyboard, for the most part using the same finger to activate.  You might have something like a trombone, a small piece of paper, or whatever it be as incorporated under the keys.  Or is it possible that something sticky might have gotten there from your hands like a few drops of soda or candy?  Which might make the keys stick.  You can take some cotton pads with a small amount of alcohol on them and clean between the keys to see if they are stuck together.

  Other than that, you can try unplugging the keyboard and plugging, reload the driver and checking all macros that can be assigned to these keys.

  Also, check the keyboard settings in the control panel and play with the repeat delay and speed to see if that will solve your problem of repetition.

  Let us know if you need help.
  Thank you
  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

  I have a problem with
  the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
  Drive hard ist crasht a moment the aktivate display the error. Please you can reset the
  key?

  Hi berndp3095653,

  Greetings.

  You must contact the customer as some changes to do on the backend

  Contact the customer service

  Concerning

  Rohit

• Problem with the key S/4 blackBerry Smartphones.

  Well, Hello community; This is my first post here.

  I have a problem with my Blackberry Curve 8520 device:

  3 days ago I typed the password incorrectly 10 times, then he appeard things like (wiping or something) and some numbers. Later, I turned on my camera; And seen all Contacts and all reset, I restarted from the beginning (adding new contacts Downloding, programs, etc.) This has worked for me for 2 days, but now... My camera is trolling as hell, (S/4) key does not work, I can not activate it with the mute button; I need to activate it with the 'Red' button, too, if I turn off the power, I can't activate it with the 'Red' button, I just pull the battery...

  (Hope you understand my problem and sorry for my English, I know; She sucks...

  Greetings, Diego)

  Hello and welcome to the community!

  You can consider a charge of BONE, that something can be a problem with your OS BB given what you describe. But first, please try safe MODE:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, run for awhile determine if behaviour will or will not return. If it is then in safe mode, then you should proceed with reloading the OS. But if the behavior does not work in safe MODE, then well... think about what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  To perform a reload of the OS, here are some process, you can use:

  At the top of each forum device, there should be some 'sticky' threads dealing with the level of the OS available for many models. If they understand your model, please use those as a reference as you go along. Otherwise, you will have to dig through the download portal official for packages of OS for your model:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try this procedure might limit the specific causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Satellite M50 Pro: Problem with keyboard - key Crtl gets stuck

  Jin

  have a little problem with the keyboard, and I was wondering if there was something I could do...

  the problem is sometimes when I am typing the keyboard, it will get stuck at random with the Ctrl key is pressed. I did no successful diagnosis as to what could be the cause of this, so I hope I can get it fixed here.

  Thanks in advance,

  NovaKry

  Hello

  I can give you some suggestions. I think the key Ctrl mechanism fits because of the debris under the key cutting.
  It of possible to remove the cup from the keyboard. Check the place around the key and try to clean it up.

• Toshiba Satelite a300 Windows 7 32 bit problem with music keys

  Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

  Sorry for my English

  Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

  This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

• Problem with some keys on Satellite Pro L300

  Hello

  I have a problem with the keyboard on my Toshiba Satellite Pro L300. I can not type 'a', 'q' and 'z '.
  ESC, F1, tab and Caps Look are also don't work.
  I don't spill any liquid on my PC. Need help please, I don't know what to do. Thank you

  You have the latest model of laptop. If there is a problem with the hardware keyboard will be replaced free of charge.
  I recommend you contact the nearest authorized maintainer and ask for help.
  With diagnostic programs, they can check the functionality of the keyboard, and see if the keyboard needs to be replaced.

• Satellite C850 - 1-5 - problem with function keys

  Good evening

  Since a few days, I noticed on my laptop that I could not do more as before, which is the volume with the button located at the top of the keyboard (F9 - F10) or the brightness. On the square, it's functions F1, F2, F3 etc. who went. I have already tried using parameters and setting key 'special functions' systems, but that worked again, then in "mode F1 - F12", still nothing and I challenged 'special functions', but again without success.

  How to solve this problem, please?

  Can you please tell us what model of laptop do you have?

• Problem with system restore post on Vista update

  My Vista PC loses the internet connection so I tried to restore to the last known point of function after uninstalling Norton 360. This has created an error in rstrui.exe (system restore Microsoft Windows has stopped working) Please help! I think this happened to post recent MS update a couple of days.

  Hello

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O what is the exact error message you get?

  O that you reinstall the Norton software before you try to restore your computer?

  In the meantime, you can try to restore your computer to a previous state of safe mode.

  Try to restore your computer to the previous state of safe mode.

  Follow the instructions to start the computer in safe mode.

  1 turn on the computer or restart the computer

  2 start typing the F8 key. The Windows Advanced Boot Menu of Options will appear.

  If you start typing the F8 key too soon, some computers display a "keyboard error". To resolve this issue, restart the computer and try again.

  3. ensure that the safe mode option is selected.

  4. press ENTER. The computer then begins to start in safe mode.

  Follow the instructions below to restore your computer to a previous state of safe mode.

  1. Click Start, type system restore in the search box, and then click System Restore in the list programs.
  2. If you are prompted for an administrator password or a confirmation, type your password, or click on continue.
  3. In the System Restore dialog box, click Next.
  4. In the list of restore points, click a restore point created at least a week before the current date, and then click Next.

     Note: If you do not find a restore point that is aged for at least a week, select the first point of restoration that is available.

  5. Click Finish.
  6. The computer restarts. The system files and settings are returned to the State they were when the restore point was created.

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• Windows 7 installed by Digital River iso, problem with my key

  Okay, so I had Windows 7 installed on my laptop and the hard drive has gone bad. During the process of trying to fix it, I tried to reinstall Windows 7 using the Digital RIver .iso file.

  I got a new hard drive today and put in place, put in the disc of Digital River Windows 7 install and performed the installation.

  Everything is good except for the fact that my system says that it is impossible to activate Windows 7 help.

  So, using the key of Windows 7 that I had with my laptop (on the sticker below) I tried again.

  I did a search online and I * think * that somewhere during the installation I should have told that installation has an 'Upgrade' or something.

  I guess he then asked for my key and everything would be fine.

  If this is the right way to do it, then I can always reinstall but I would find it rather another way to recognize I am owner of a valid key of Windows without having to go through all set up again.

  Thanks in advance for any help.

  Your problem is that, for some reason, the system is unable to properly read the table SLIC in BIOS, what is required in order to triggered the key OEM_SLP with which the computer came installed.

  The normal solution is to change the key for that on your COA sticker - but you say that you are unable to read the key here.

  In such circumstances, are the only things you can do

  (1) all reformat and reinstall using the manufacturer's recovery media
  (2) purchase of a new license for Windows (or a new computer)

• Problems with some keys on my keyboard

  Hello

  I just bought a 'Design for Mac touch' keyboard Mobility Lab to go with my MacMini. However, I have the following questions:

  -the clear key deletes the letters on his right (and not on his left as usual).

  -the arrow keys do not work! In a text or as a tool for scrolling on the internet.

  Before that I had a Mac keyboard in Icelandic, but now I have a French keyboard, I made changes on region and language but maybe I forgot to change something...

  Any help welcome!

  Thank you

  Hello, you can use a few tips in this article http://www.macworld.co.uk/how-to/mac/how-fix-mac-keyboard-3598931/

  Keyboard settings can also be customized in System Preferences - keyboard.

• Satellite P755-S5262 problem with Fn keys

  EDIT: never forget - I solved the problem on my own.

  Post edited by: realisminflicts

  It s great that you solved the problem on your own but an error description short and some information that you did would be nice just to other owners of Satellite P755 ;)

  Please send feedback

• install problem with product key

  The School Board who fired my wife was kind enough to give him the laptop she used. Of course it soon crashed and is not worth repair. My question is - can I use the product key from the sticker on the laptop to install WIN XP pro on another computer?

  TKS/Ed

  NO.

  The product key is only 'valid' for the computer to which the sticker is attached.

  Serving the community one computer at a time www.therushvillecomputerguy.com please post a reply to let us know whether or not our response helped.

• problem with activation key

  recently my brother who was in the United States gave me his laptop for my use during his visit last month, when I started it showed that this is not a genuine software. but there are a few key already entered the activation path. It's a lenovo laptop with windows 7 ultimate. can someone help me out for activation please

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012