Problem with the report as a button link

Similar Questions

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• Problem with the Code/Design view buttons

  (My bad... maybe a clearer title will help you...)

  OK, I work with DW CS4 v.10.0 Build 4117 on a platform of Win XP Pro SP3.

  When you work with files from my site, they open in Code view.  The Split and design buttons are grayed out.  When I click the page layout button, the check mark is sometimes next to the option Code, but sometimes next to Design (even if the page is clearly displayed only in Code view!).

  To view the file in Design view or split view, click the page setup button, click on the Code, click on the button layout again, click Design or split view and then it will display the page in this way file.

  It's SO frustrating!  Is this a bug in CS4?  (I scanned through the other topics and can't seem to find anything about it.)  I don't remember having this problem with CS3 and have spoken with other DW CS3 users who also say that they have never had this happen.

  What can I do?

  Thanks in advance for any help you can provide.

  Susan

  Hi Susan,.

  I might have a solution for this one. I had the same problem. It would be 'reliable' whenever I would create a new PHP file.

  "File" > "New" > "PHP" > Layout 'None' > 'Create' - no buttons 'Split' or 'Design' (grey)

  In 'preferences' under 'File Types/errors', there is a section "open in code view".

  I removed the. The extension PHP from here, tried again and it worked!

  Maybe it will work for you.

  Good luck

  Tony

• problem with the command stop and buttons

  Hello world.

  Here's my scenario

  I have a project where I have 5 buttons (all on separate layers) I want to put a link to the image 2, image 3, image 4, part 5 and part 6.

  Thus, for example, I want my topic is to link to the Framework 2 and last new button, to link to the image 3

  The separate pages are housed on the layer 'layer of page '.

  Please see the image below to see what I mean

  

  I'm using the code snippets in cs5 to do this, so I am using the command "click go to frame and play" and change the number of the framework accordingly.

  My problem is when I use the command to stop on the first frame. If I do not use the command the swf allows to select the 6 images constantly, but when I use the command stop buttons do not work because the application has stopped.

  Anyone could shed some light on this problem?

  It may be a case for the use of your gotoAndPlay() where you need gotoAndStop().  If you are on the frame you say to go to play, he can't go anywhere to get there, and stop it is already sold out, so it will play thru to the next stop.

• Problem with the play, pause, stop buttons etc on Satellite M30 842

  I have tried pretty much everything I can to get these buttons to work, but it seems that their just their for pleasure. any suggestions?

  I also wonder if anyone knows if it is possible to download the drivers for the sd card reader able to read cards mmc...?

  Hello

  I put t believe that the buttons were eating here just for fun. If the laptop is not preinstalled with recovery CD all tools must be installed correctly. I don't know, but TOSHIBA controls V3.01.0400 tool is responsible for this button.

  To read SD cards, you need to install a tool SD Card Driver Set V2.0.4 and TOSHIBA SD Memory Card Format V2.0.1.1. Try it.

• Help with the report

  Hi gurus,
  I'm having a problem with the report. When I add a new column to the existing report its showing no no no result except the filter. Is there a solution for this problem in the responses.
  
  Thank you

  Is that your new column is a table that is not already covered in the report. If this is the case then check the SQL generated by the report. Run this query on the database and see if you have found no results.

  If she came a new table which is not referred to the report already at the time of OBIEE will create a join with this table and maybe because of this join you don't get any results.

  Regards,
  Sandeep

• Problems with the buttons (on the area of State/Hit)

  The site I'm getting is:

  http://www.RelicRockBand.com

  If you go to the "Biography" section, you'll see four links that work as buttons of reversal.  Now, if you go to the 'Media' section, you will see 6 links that do not appear to react correctly as buttons of reversal.  They fulfill their function, but it is difficult to get the button to appear in its "underline" in the State.  I don't know if it is a problem with the over State, the status of success or another problem with how I built the site.  If you want to take a look at this, go to:

  http://www.uvm.edu/~nmphilli/Relic_Website/Flash/Relic_Webpage.fla

  to get the FLA for the site.  The concerned items are nested as follows: in scene 1, on the content layer, label image 'Media' (frames, 16-21), you will find Media_Fader, where is Media_Content, in which are several buttons, each with getURL actions that are applied to them.  Any help would be fantastic!  Thank you!

  -Nic

  The question always involves using the textfield links.  Remove the textfields in all settings inside the buttons and your problems should go away.

• Problem with password reset link - "there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. »

  Hello, account Windows Live from my wife was hacked a week ago and has been used to send many spam emails. As a result, his account has been disabled or closed (we are not sure). Whenever she asks to reset a password and a link sent to a different e-mail account, when she clicked it gets this message 'there is a temporary problem with the service. Please try again. If you continue to receive this message, try again later. "She is tried repeatedly, but get the same message. Someone knows how to go beyond that, so she can recover her account? Thank you.

  Hello BBB34,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• I ran CHKDSK, the report tells me I have problems with the file system, usn journal. ___

  I ran CHKDSK, the report tells me that I have problems with the sys file. I ran CHKDSK/F, it is said it fixed the problem but I ran CHKDSK again and it shows that the same listed the issues.

  Describe how you run chkdsk.

  That is what the report said: you have problems with the sys file?

  CHKDSK examines the disk space and use of the disk for the table of allocation of files (FAT) and NTFS file systems. CHKDSK provides information specific to each file system in a situation report. The report shows the errors found in the file system. If you run chkdsk without the /f on an active partition command line option, it can report errors because it cannot lock the drive. You should use chkdsk occasionally on each disk to check for errors.

  If you run chkdsk from a command prompt while Windows is running, it can report errors or it may not report errors - and it may report different
  Errors each time you run.  If this is the case, it could just be the way you run chkdsk.

  Here's how Microsoft explains this observation:

  "... CHKDSK may report that the disc is damaged, even when there is no
  current real corruption. This can happen if NTFS happens to modify
  areas of the disc on behalf of some programme activities that CHKDSK is
  review at the same time. To check a volume correctly, the volume
  must be in a static state, and the only way to ensure that the State is
  to lock the volume. CHKDSK only locks the volume when /F or/r (which
  involves the 'F') is specified. For example, you may need to run CHKDSK more than
  time so that it can complete all the steps in read-only mode. »

  If you run chkdsk from a command prompt, you are not the necessary static state and you can encounter errors "when no real corruption is present. This is how it works when you use this way.  Any changes made to a NTFS file system modifies the USN Journal.  If you are not in a static state, your USN change Journal probably all the time, so what you see (says something like that) can be quite normal.

  Two ways to ensure that you are in a static state is to run chkdsk from the Recovery Console or to schedule a chkdsk to run the next time that the system
  Restart by answering Yes to the question:

  Would you want to check this volume to be the next time the system restarts?

  If chkdsk reports errors when running in a static state, the errors should be investigated, resolved or explained.  This may take several
  chkdsk runs all of the issues and some problems cannot be resolved by chkdsk.

  If chkdsk runs the next time the system is restarted, the activity and the result will be displayed in the application event log.  Look in the Application log for
  Winlogon events and a source have the date and the duration nearby time chkdsk.

  It is in fact a chkdsk additional reading if you want to learn about it and it will explain everything you see and why your expectations exceed reality.

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony!

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Problems with the sound button and the wireless button

  I have a computer laptop dv6-2155dx, and he has a problem with the sound, the button bar button and the wireless button, all of them continue to work, I do not know if I made a mistake and let them turn off or there is another way to get available.

  I need some advice.

  Hello

  Do a hard reset:

  1 disconnect all devices and remove all USB devices and multimedia cards.

  2 disconnect the power adapter, remove the battery and then press in and hold the button for at least 1 minute.

  3 reconnect the power adapter (do not connect the battery), press the power button

  Verification is your problem is resolved or not.

• Problem with the Access toolbar buttons

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hi, I have a problem with the Access toolbar buttons. instead of icons, it shows just 2 boxes, as we get police unknown boxes. Help, please.

  Hello

  Those who are not traditional icons they are symbols that belong to the Segoe UI police.

  See the following Web site for an excellent tutorial to solve this problem.

  [SOLVED] Unknown character or vertical Rectangles are appearing in place of metro icons in the Windows 8 start screen and login screen - tweaking with Vishal:

  http://www.askvg.com/fix-unknown-characters-or-vertical-rectangles-are-showing-in-place-of-Metro-icons-in-Windows-8-start-screen-and-login-screen/

  Let us know if it works for you.

  Concerning

• Problem with the links and libraries CC

  Dear forum

  I have a problem that can be solved, hopefully, I see myself as a new user of Indesign and help would be appreciated.

  Since the update to the new version of Indesign, I had a problem when I open multiple files and all the links are missing. These are stored in the CC library in more than a library,

  After attempting to repeat the assets, I get the following message.

  

  I made a copy of the file and open this file without result

  I think it's a question of libraries CC because it seems that the library is unable to find the file, but not 100% sure here, just a guess.
  I am connected to AdobeCC when the message above

  I hope someone can help

  Thank you

  Note: no files where changed or moved the location, including the CC library during the update of Indesign.

  When you have problems with the CC libraries, this often solves the problem:

  Go to the creative cloud desktop application (found in the Menu bar on Mac, the task bar in Windows). Click on the "gear" icon > Preferences > General. Logout, then signed again with your Adobe ID

• I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  I have problems with the shopify widget in Muse. I have configured my shopify store, but when I placed the button 'buy' is didn't tell the product no availabe longer and does not appear when I'm writing the site.

  Please contact the original publisher of the widget.

  Thank you

  Sanjit

• Problems with the navigation links in EDIT mode in the Business Catalyst Muse sites.

  Has anyone else had problems with the navigation links / EDIT mode in sites Business Catalyst Muse?

  In EDIT mode, I can't use the list drop DOWN the SELECT DIRECTLY to go to another page or a link. The drafting of the text or label works, but to actually go to a /visit link a hard link is broken.

  

  Others have this problem as well.

  No work around?

  Thank you!

  I have the same problem! Contact BusinessCatalyst today taught me that it is a known bug and have Adobe Muse to fix! LiveChat ticket No. #159685

  When I launched the Web site in may 2015 everything worked well, but since the update of CC, this problem occurred.

  The tip of solution, I received the BC is to always use the navigation menu bar. This does not work for me because my client wants a menu of polaroid...