Problem with Photoshop CS4 update

Similar Questions

• 2nd monitor problems with Photoshop CS4 and CC

  I'm on a quest to solve a problem with my second monitor when using Photoshop. When I hit F in photoshop to switch between display modes or when I Zoom in or out this happens:

  

  OK, well it is turned on its side, but you get the point. Until very recently, I used OS x 10.6.8 with Photoshop CS4 with no problems but ran into some problems with applications etc so I upgraded to Yosemite. That's when the problem started. In order to solve what I did a clean install of Mavericks in the hope that Yosemite was too new and that he had not brought bugs. Then I reinstalled CS4 there more this problem, but another problem just as boring. the profile for the 2nd monitor appears so desaturated and terrible that I can't use it to edit, despite several attempts to recalibrate.

  Out of curiosity I tried the trial of CC in Photoshop to see if the problem of mosaic has been fixed, but it wasn't. Right now looked at color, but mosaic problem. Here is the info on my computer:

  

  I changed in system preferences > energy saver > graphics for better quality, but nothing has changed. In Photoshop, I tried Preferences > performance > the GPU settings > advanced settings > changed in Basic drawing and that did not solve the problem either. Any ideas?

  10.10 MacOS still has a number of video driver bugs, some causing display corruption and others causing accidents.

  Apple is aware of these driver problems and work on solutions.

  Turning off the use of Photoshop GPU can help.

  But if you need the GPU features, you can return to a stable version of MacOS.

• Problem with Photoshop CS4 me on windows 7

  Hello

  I installed Photoshop CS4 me on windows 7, but every i open photoshop, it gives me an error with this message:

  

  I have HP DV5 1299ee (NVIDIA GeForce 9600 M GT) I downloaded the new version of my VGA driver and installed (version 186.81) but it wrong again and I'm going to the adobe Help Center, and I know I have to active GPU and GUI, but I don't know how active in them.

  Please help me to active them.

  And I have another problem, when I want to save a modified image, the default format is. How can PSD, I change it to. JPG.

  Thank you

  You mean, how do you know if OpenGL is active in Photoshop? You can check that in Edit-> preferences-> Performance

• Help! problems with photoshop CS4 brushes

  Please help me!
  I have a problem with the PSD, because whenever I want to use the Brush tool, I don't see the entire circle, which usually appear in other versions.
  It is customary to set up, but only to see a piece of the circle.
  [url =http://img23.imageshack.us/my.php?image=fotoshop.jpg] [img = http://img23.imageshack.us/img23 /2875/fotoshop.th.jpg][/url]
  P.D. someone knows how it can be configured to use the OpenGL and other tools and off the pixelgrid tool?

  Thanks for the help!

  Make sure that you have installed the Photoshop CS4 11.0.1 patch and you have the latest video card drivers as this should solve your brush (unless of course you hit shift caps lock by accident)

  To temporarily turn off the pixel grid, you can use Ctrl + H. If you want to turn it off permanently, deselect view-> see the-> pixel grid

• Problem with Photoshop CS6 update

  When I try to upgrade photoshop I get a message that tells me to disable the Dynamiclinkmanager.exe. I don't know what or where it is, and even less how to disable. I'm not particularly fit to deal with the computer application files, then I would appreciate an answer than a 12 years - who probably knows what the sacred thingy is in the first place. -could understand and follow. Thank you for your help.

  Please open the tast Manager and click the processes tab and look for Dynamiclinkmanager.exe in the list, please right click on the same and select end process.

  After the above mentioned scene step try to run the update and let us know in the case where you any number of cases.

  Kind regards

  Jatin derfoufi

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Problems with Photoshop CS5

  Hi all

  I'm having a problem with Photoshop CS5, as you can see from the pictures the work area does not show anything.

  Does anyone have an idea of what could be the problem and what can I do to resolve this issue.

  Any help will be appreciated.

  Regards Andy.

  

  Try updating the video card drivers and if that doesn't work then try turning off the drawing OpenGL from edit-> preferences-> Performance

• Print problems with the recent update to Version 10.11.5

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Roger 510 wrote:

  Print problems with the recent update to the Version of El Capitan 10.11.5.  Cannot print to my Epson and Samsung printers after update to new IOS.  Print jobs get hooked on my Mac Pro.

  Have you checked with Epson for an updated printer driver?

• seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  seems I'm not the only one having problems with safari after update 9.3 cannot follow the links. Safari blocks. hope it gets fixed quickly. jaa shooting allows to follow the link, but the Web page is not out of good old days. any oher ideas?

  The 'list' of relevant articles that I know, they are now

  -You can read about the problems in the present statutes and possibly find workaround solutions, particularly in the last

  If you are unable to activate your iPhone, iPad or iPod touch after installing an update - Apple Support

  Apple iOS suspension 9.3 updates for older devices, work on activation fix | IVous

  Apple launches new version of iOS for iPad users 9.3 2 affected by bricking bug | 9to5Mac

  GSM of unfixed addresses Apple iPad 2 Bug with revised Activation iOS 9.3, but the larger question remains - Mac rumors

  If you are unable to activate your iPad 2 (GSM model) update to iOS 9.3 - Apple Support

  9.3 iOS update issues

  Leave a post by: ChitlinsCC

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  I am also having the same problem with the same updates. I have Windows XP SP3 and it's updates with the problem.

  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2572073)
  A security update for .NET Framework 2.0 SP2 and 3.5 SP1 on Windows Server 2003 and Windows XP x 86 (KB2518864)
  Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)

  They all install properly but switches back to windows update to install. It's some kind of loop.

  Hi billy73,

  In addition, if you still have questions, please take a look at the thread similar here with a solution as possible.

  I hope this helps!

• Problems with Windows VISTA update (error code: 9 c 47 of the 800070002, D 80024200)

  original title: problems with Windows VISTA update

  I'm using Windows Vista (SP2). Windows update is not able to update the following updates on my system. Whenever I get these error messages.

  1. 9 47 code
  2. Code 800070002
  3. Code D 80024200.

  Is there a resolution to do the same thing?

  Hello

  Did you change your computer?

  I suggest you to follow the methods and check.

  Method 1:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 2:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 3:

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Problems with Win 7 updates

  Hello everyone,

  For weeks I can't update my Win 7 Home Basic on an ACER PC of detail.

  I get the usual Windows Update screen, it shows the download of updates, but then it shows (0 total KB, 0% complete), while 0% does not change.

  I chose the only feature in the file of 1 MB to see if changes as the download progresses but 0% 0% does not change in 10% or more not even after 40 minutes.

  It seems that something stops the download.

  Please tell us how to make the change from 0% being downloaded.  Thank you.

  Merry Christmas!

  Hi John,.

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a problem with the Windows updates not working only not on the system.

  Certainly, I understand your concern and will try my best to help you.

  There could be a possibility that this issue would have intervened if the updates were not installed correctly on the system.

  I can really imagine the disadvantages suffered by you during the installation of Windows updates. Sometimes it is really frustrating when things do not work correctly with the machine that we are planning and wait. So, we need find the root cause of the problem and I would definitely you help solve the problems in the right direction in order to get this fixed number.

  The question arises if the Windows Update package is not configured properly, or because of incomplete installation. I would say so, you remove any external media connected to the computer and try to crash restart your computer 2 or 3 times and check if you get through this error message.

  In addition to this, I suggest you try the following methods if you are able to boot to the desktop and check if the problem persists.

  Method 1:

  I suggest you run the Windows Update Troubleshooter to check if it works. Please follow the link given below.

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Windows-Update-Troubleshooter

  Note: The troubleshooter above checks if the network card and Windows Update services work properly.

  If the problem persists, follow method 2

  Method 2:

  I suggest you to reset manually the update of Windows components. Please follow the steps outlined in the article below and check if it works.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Now, you can try to run the Windows updates and check if the steps above to solve the problem.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

   

• problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help?

  problem with photoshop 2015.5, everytime I open photoshop all my preferences are reset to zero. very annoying, please help? I tried my default preferences of rest, it did not work! need for this problem!
  

  I gave a sort of special authorizations, the reading and writing have been already checked, but it seems to work now, thx

  "Follow these steps:

  • Quit Photoshop
  • Navigate to the location of the settings Adobe Photoshop CC2015.5 folder manually.

  Location specified in this article depending on your OS: preference file works, names, places | Photoshop CC 2014

  • Make sure that the Configuration of the CC2015.5 folder has full read and write
  • Restart Photoshop and then check. »

• Unable to access filter of the same oil painting with Photoshop CC update (2015.1.2) today

  Unable to access filter of the same oil painting with Photoshop CC update (2015.1.2) today

  Hi nevans,.

  Please see the oil painting is gray

  Note that your graphics card must support OpenCL 1.1 or later and must be greater than clgpu OpenCL scores [0]. CLBandwidth = 1.2e + 10 and clgpu [0]. CLCompute = 5.0.

  Kind regards

  Assani