Problem with playback of address book contacts in bold...

Similar Questions

• Problems with Outlook Express (address book, mail open, etc.)

  Hi, I have a strange problem with my outlook express. The program opens ok, it synchronize the e-mail with the servers and so on. If you click on an email in the upper part of the window you can see the content below.
  Now, this is my problem, I can not doubleclick on an email to open it, I can't send an email or forward it. I can't open the address book.
  I get different messages, "it was not possible to open the address book, it cannot be installed correctly", "the message could not be opened, an error has occurred", "it was not possible to load the due address book that Outlook Express is not properly configured. Reinstall Outlook Express"and so on.
  I used this software for many years and the problem came from one day to the other. I tried to uninstall/reinstall the program from the Control Panel, I did a repair on XP installation, but it is always the same, is there anyone who has an idea (I know that Outlook Express is and old program, but it works very well for my needs).

  What about Nils

  First, try a new identity and see if that helps.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit:
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  **************

  If the problem persists, start looking here.

  All of these errors have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen MS - MVP [Mail]

• How to get the Pic of the address book Contact gave a phone number

  Hello

  How can I access the Blackberry address book and retrieve Contact's photo?

  I tried:

  String phoneNumber = "1234567890";
  Vector contactList = new Vector();
  contactList = Phone.getContactsByPhoneNumber(phoneNumber);
  

  except with a real number, of course. However, if I keep this code, I get an error saying ClassNotDefFoundError or something like that. on the line of Phone.getContactsByPhoneNumber () .

  Is there another way I can get the pic contact associated with a single address book contact?

  Later, I'll probably use this code to get the photo of contact:

  Contact contact = (Contact) contactList.elementAt(0);
  byte[] byteStream = contact.getBinary(Contact.PHOTO, Contact.ATTR_NONE);
  EncodedImage contactPic = EncodedImage.createEncodedImage(byteStream, 0, byteStream.length);
  

  So as you can see, I just need to get in contact for a specific contact record.

  Thanks for any help.

  If anyone is interested, he will get the peak of contact contact, based on the phone number. It assumes there is only one contact for this number, so if there is more than one, it will get the peak of contact for the last contact only, because the loop will overwrite the previous photos.

  BlackBerryContactList contactList = (BlackBerryContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
  
  // Get a list of contacts that match the phone number (I only want last 8 digits only)
  Enumeration _enum = contactList.items(inputNumber.substring(inputNumber.length()-8),BlackBerryContact.TEL);
  
  while(_enum.hasMoreElements())
  {
      BlackBerryContact c = (BlackBerryContact)_enum.nextElement();
      if (c.countValues(BlackBerryContact.PHOTO) > 0)
      {
          byte[] photoEncoded = c.getBinary(BlackBerryContact.PHOTO, 0);
          byte[] photoDecoded = Base64InputStream.decode(photoEncoded, 0, photoEncoded.length);
          EncodedImage contactPic = EncodedImage.createEncodedImage(photoDecoded,0,photoDecoded.length);
          String picType = String.valueOf( contactPic.getImageType() );
          // If you want to store the photo as a HEX String
          String hexPic = byteArrayToHexString(photoDecoded)
      }
  }
  

  FACT!

• How to make thunderbird stay updated with my osx address book?

  When I installed Thunderbird on my Mac, I clicked on the option to use my OSX AddressBook and he showed all the addresses. But when I'm updating my address book (the original address on my Mac Book - changes can be made of in Thunderbird), the changes are not reflected in Thunderbird. How can I keep Thunderbird in sync with my Mac address book.

  As Thunderbird read only access to the MAC OSX address book. If it does not, it is a problem with your mac not allowing not to display updates.

• Help: problem with playback device

  Hello

  My dell latitude e7240

  and my headset logitech g150

  does not connect it says: problem with playback device

  It calls for 1 second then ends

  and when my friends try to call the said

  contact can only receive instant messages

  Help, please

  and fast

  Thank you very much

  I did a diagnostic test and other results are here

  https://www.dropbox.com/s/ipvyg52xhfwjrly/Dxdiag.txt?DL=0

  and Skype is the last

  Thank you

  answer soon

  Morgan

  Topic/title edited for clarity.

  Still no trace of your helmet and Avnex Virtual Audio Device is always installed.

  The specified Audio Capture Source only is Avnex Virtual Audio Device

  audio Capture Sources :

  Microphone (Avnex Virtual Audio Device), 0 x 00200000, 0, 0, qcap.dll, 6.06.9600.16384

  Open the Windows Device Manager. Are there looking for this virtual audio capture device, then uninstall it.

• When you send an e-mail, I lost the address book contact list address on the left side.

  I used to have address book contacts list on the left side of the page, which is transferred to allow easy selection of the recipients. He disappeared and I need this back.
  Thank you very much

  OK, you started a new message, you click on answer, or you clicked on to the front.

  The new message window opens. This is where you should expect to see the Contacts Sidebar. At this point by pressing F9 on your keyboard (do you need to use a special function key to access the F9 key action?) should display on the left. (You said you "click on F9"?)

  If F9 does not work, turn on the menu of the compose window.

  Press and hold the < alt > key on your keyboard. Press V. The menu should appear. There you can select Contacts Sidebar.

  If you want to have the Menu or the toolbar displayed each time press and hold the < alt > key on your keyboard, press V, and then toolbars, where you can select the Composition toolbar.

  When the toolbar is visible, you can customize it to include a Contacts button, if it has not already a. You will see a custom option while following one of the sequences leading up to, or you can right-cliik the toolbar itself.

• Problem with playback device?

  Video call in progress version 7.2.59.103 3 days ago made in New Zealand was in line for 40mins no problem what ever. as soon as I ended up call message problem with playback device. and as soon as I use either call or video call immediately, the page returns to the home page and does not appeal. checked devices audio all working correctly, no update of windows for the last 3 weeks. using Skype on my asus laptop 5 years on widows 7

  Hello, do not know what I did but trhe message has diasppeared, and the test call also works OK now.

• "the problem with playback device" with Skype.

  receive 'problem with playback device' with Skype.  When I go to the Control Panel on my pc dell under sounds, etc., there is no option of reading before it takes.  have spent hours on Skype and my pc. Help!

  Hi BeverlyBowers,

  Facing any problem with the sound on the computer other than on Skype?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Method 1:
  I suggest you to run the Fixit and check if it helps.

  Automatically diagnose and fix the audio problems and Skype webcam
  http://support.Microsoft.com/mats/Skype/

  Method 2:
  If the problem persists, I suggest that you make sure that speaker or headphones are selected by default.

  a. go to Start and click on Control Panel.
  b. click on her, then a new window will open.
  (c) in the new window click on the tab "recording" and right click in the window and click Show disabled devices.
  d. now check if the speaker or headset is listed here and right click above and choose Activate.
  e. highlight the speaker or headphones and click on 'Set as default'.

  Method 3:
  If the problem persists, I suggest you install the latest audio drivers on the manufacturer's Web site and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Skype usage error: problem with playback device

  Original title: Skype.

  I'm calling by Skype and it is written that I have a problem with "currency of reading".

  What should I do?

  Hello

  ·         Audio devices work otherwise?

  Problem with playback device means that Skype cannot find a speaker or a headset that is properly configured on your machine in order to make a call.

  Step 1: Launch the audio troubleshooter. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-playing-audio-Troubleshooter

  Also refer to the support of Skype.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Passport Mac Address Book Contacts transfer BlackBerry

  How to transfer Blackberry Q10 and passport to the Mac Address Book Contacts?

  check cela, open your Contacts app, tap the lower left Menu and tap the Gmail account.

  How many contacts is there? None?

  Ok.  You will need to export your contacts from the passport by a third party applications such as BackupPro in a CSV to your PC, then import that CSV file to Gmail on the PC (or Mac).

• Request for information/blackBerry Smartphones: where is the address book/contacts stored in the BB Torch 9800

  Hello everyone, could someone tell me where exactly is the address book / contacts stored by default in the BB Torch 9800, IE; in memory of mobile phone, the SIM card (I don't think) or in the micro SD card card (multimedia card)? Thanks a lot for your answers. Best regards, Eric

  Edit: Deleted email. At any time if you provide personal information to any other Member of the community. Please visit the Community Terms & Conditions and community support guidelines for more information.

  More precisely in the device memory. Not in the media card or the SIM card.

  It is where they are stored by default and cannot be changed.

  You can save contacts to your SIM card, but only one number per name, no address, no email address, etc.

• BlackBerry Smartphones phone Auto Cancel call history, address book contacts

  It's annoying when you select a phone number from your history, contacts or address book and the "BOLD" auto dials the number.

  If you select an incorrect number of touchscreen phone auto dials the selected number wrong, and it's easy to do on a touch screen.

  I want to be able to make the call to the phone call button, so I can check the number before it's called.

  I want to be able to select a phone number and make sure that I have the right one before the phone dials.

  How can I do this?

  No, you're right, thank you for answer.

  I have big fingers and old eyes, then when I select a number to dial from the screen story or contacts I sometimes miss and select the wrong number, and this car becomes dialed.

  So what I was hoping, it was when I select a number that would put it in the field of the dialer and I appeal.

  How could I make sure that I selected and dialed the right number.

  Thank you

• Does anyone have problems with playback when editing v9.2?

  I have problems with playback when you change a small project (4 min).  I had a few problems on previous projects, but this one is particularly bad.   When I read my edition, the (unique) audio plays normally but video lags or freezes completely.  I can get around it temporarily by parts of the sequence rendering, but that's a lot of time and as soon as I make a change, the problem reappears.  I updated drivers etc. After reading the other reviews but it now becomes impractical, and I'm seriously considering whether I should continue with first or look for something more reliable

  PLUG

  Samsung Chronos i7 with 8 GB of RAM and a lot of spare

  WIndows 10 build 10586.218

  First Pro 9.2 zigzag

  Pilot of 640 M from NVIDIA Ge Force GT 353.90

  

  The only area I think needs expansion is the disk configuration.  Here's what I recommend as a starting point.

  C: Windows and programs

  D: project files, audio, and still images

  E: cache and Scratch

  F: media camera only

  G: export

  In addition, a form of backup solution in place.

  The above will give you excellent disk performance, spreading things to prevent the creation of a bottleneck.  It is based on the use of the HARD drive, simply because they always have the best bang for the buck.  But if you have the scratch for some good sized SSD, the situation changes a bit.  You could probably combine D and E on a single SSD and F and G on a third party, without slowing things down significantly.

• Is a person having problems with playback with blocking sequences?

  Is anyone having problems with playback after creating a multicam sequence? This occurred after the recent upgrade.

  Basically, I merged my video files and audio files into one (fine and dandy), but when I tried to look into the window of the monitor or timeline, he would not play! What is the problem? I've done several times before...

  Let me know if anyone knows this.

  Thank you!

  I talked to Tech Support yesterday and they told me to enter all your audio clips in the sequence Ctrl + (secondary click) click on them and press Render and replace. Then, you close app and load project again you. It has worked for me since I went deep into audio original for all sequences of blocking and rendered and all replaced. Apparently, there is a problem in this version on the audio clips in sequences making making them generate this error, but this type of tech support does not explain to me exactly what was going on. Apparently the Render and replace fuction restarts a little audio clip and allows to you to sequence work normally again. Make sure that you apply to the original audio clips of each cam, no to your chopped pieces place in the timeline you edit.

  Let me know if it worked.

  Good luck.

• Incoming calls do not always resolve number of phones smart blackBerry address book contact

  I have a 8310 with os 4.5 (which I highly recommend) and I met a problem when receiving calls... the number is not always resolve on behalf of my contacts, so I don't always know in advance who he is! very annoying!

  for example, if the contact mobile number starts 079, the call sometimes comes with the prefix int IE: + 4479, but on other contacts, it will help 079, so sometimes when I get a call, don't tell me who he is. In addition, when the call is completed, it resolves the name in the call log.

  the question on previous OS, 4.2 I think. works, if I've got numbers duplicated by contact (079 and + 4479), but is not ideal. looked through all the options I could find with no luck.

  any help / advice appreciated. Thank you.

  It could be one of the three solutions... Try these:

  1. make sure that you set your own country code to the Phone Dialer screen > Options > smart dialing.

  Set your country code in this format: "+ xx" where xx = country code. Some countries have two or three-digit country Codes. Do not place not the '+' in the entrance of your contact.

  • In the United States, the value of this country as '+ 1' Code and place your local area code in the appropriate box (this normally the default setting in a new BB).

  2. in the same place, change the length of National number for the number of digits corresponding to your country (since some countries have less than 10 as that set by default in the BB). Check out the total numbers, less country code. Do not place not the '+' in the entrance of your contact.

  • For example, some countries have a total number to 8 (more than 3 for the country code). You must enter '8 '.

  3. you probably have "Content Protection" located on your address book.

  Look at the Options > Security > General settings. Scroll down to the content Protection > include addresses = no