Problem with preloader has failed on nextFrame();

Similar Questions

• problem with preloading of audio & responsive scaling

  2 things I noticed with the new version 3.0 dashboard animate:

  1. audio preloading caused my page never load when you use mp3 and ogg files. After disabling this option of the stadium, the page loaded fine. Also noticed on my device android mobile when you use the Preload option (where preloading is not allowed) the same page - who gave my pc fits - loaded OK still convince me that there is a problem, I can easily avoid by preloading is not audio.

  2 when using the scale option & centering of the scene where maximizing the screen fonts original became grainy - I must not have made my original stage large enough type is being intensified - I used Pinyon Script & Verdana which came with edge animate. I used the default size of stage of 550 x 400 pixels. my pc screen resolution is set to 1600 x 900. my mobile device looks perfect, its screen resolution is 1280 x 720 hd.

  Support of Adobe's video will be added as audio was, other wise I'll just use edgehero if I can get the effects of After Effects to work.

  In Sara Hunt video it refers to an Animation Greensock she used, could you please post her example somewhere or otherwise tell me where it can be downloaded from? I would be very interested in the way in which she obtained the Greensock script to stop and restart the inside edge animate - something I couldn't go to work earlier. Thank you.

  Bob

  Thanks Bob.

  If you wouldn't mind pass like a Flash of your project file and uploading it to creative cloud and IM'ing me a link to download it, I would also like to see the audio in context with other features to animate, you may have used in your computer.

  Thanks again,

  Joe

• Problems with Adobe Reader - failed to install properly

  I had Adobe Reader is installed on my Windows 7 laptop for a while and it worked perfectly until recently.  It works automatically, but recently, when I tried to download a document that I give permission to Adobe, I've been happy to work this way even if it caused irritation.  Tonight Adobe Reader would not work, but next to the Adobe Reader has been blocked because "it's outdated".  I tried to update, but get the message "that a single instance of the application can run". "."  I tried to solve this problem in uninstalling and reinstalling, but I still get the last message. When I finally installed the program, it has not completed the installation as it does not appear as an installed program, I don't have a clue what to do to fix this problem and would appreciate your help.

  You can try to use this tool first remove all traces of your computer:

  http://labs.Adobe.com/downloads/acrobatcleaner.html

  Then you can download the complete player offline installer from

  http://get.Adobe.com/reader/Enterprise/

  After downloading, restart your computer and run the Setup program before anything else.

• Problem with preloader...

  Hello. I have a following problem. I made a simple preloader to my animated film and its great except the transition between the last image and the second image (1 frame is preloader). In animation, he is seeking a disappear for a while. It is not a problem for a lot of hot flashes, but in my case, I have continual play after loading my flash. I enclose a 'FLA' file to my post. Maybe someone can fix the problem. Thanks for the tips...

  http://www.speedyshare.com/files/30380232/test.fla

  I think I muse use loop in modified 2 chassis mounting after the preloader to appear... but how can I do...

  I looked at your file and placed the code I gave in the last frame of the animation on the main timeline and not flashing the first picture after that.

• problem with preloader in Cs5 with AS2

  Hey,.
  I did a preloader in Cs5 with AS2 code:
  mask_mc._height = 1;
  this.onEnterFrame = function (): Void
  {
  var load: number = this.getBytesLoaded ();
  var total: number = this.getBytesTotal ();
  var percent: Number = Math.round(loading/total*100);
  mask_mc._yscale = percentage;
  txt. Text = percentage + "%";
  If (load > = total)
  {
  gotoAndStop (2);
  }
  }
  because I realized that what I'm used to the Cs4 does not work in Cs5. It works fine, but when I press a button, it suppose to go to another frame, it stock on frame 2.
  How can I solve it?

  to end this loop:

  mask_mc._height = 1;
  this.onEnterFrame = function (): Void
  {
  var load: number = this.getBytesLoaded ();
  var total: number = this.getBytesTotal ();
  var percent: Number = Math.round(loading/total*100);
  mask_mc._yscale = percentage;
  txt. Text = percentage + "%";
  If (load > = total)
  {
  delete this.onEnterFrame
  gotoAndStop (2);
  }
  }

• Problem with Preloader in my Flash's AS2 game

  I have been using this tutorial to make a preloader:
  
  http://www.republicofcode.com/Tutori.../preloader_bc/
  
  I ran into one problem however.
  When I simulate the download, it shows just the background color of the game while it loads, and when it finished loading, it displays the full loading screen. I followed the tutorial exactly, except added my filenames in the AS2 code.
  
  Image 1, I to the preloader, the following ActionScript code:

  
  

  if (_root.getBytesTotal() != _root.getBytesLoaded()){
  stopAndGoto(1); 
  }
  preloaderBar._xscale=(_root.getBytesLoaded()/_root.getBytesTotal())*100; 
  loaderTxt.text=Math.round((_root.getBytesLoaded()/_root.getBytesTotal())*100)+"%";
  
  

  
  

  
  

  The advice or answers to what I'm doing wrong?
  
  Thank you, MrA615.

  Place your other items in 3 (or higher) of other layers

• Why update on Lollipop with CCP has failed?

  Hello everyone. I tried to update my phone using CCP, but I couldn't.
  The CCP stated that there was no connected phone, even if I connect my phone with a USB cable. I have also
  Enter the setting on my phone xperia connectivity-USB connectivity-USB connection mode-
  checked the MTP mode. That's the thing I have to do, or should I select MSC mode.
  I also tried MSC mode. The MSC mode the CCP could see my camera,
  but when I try to backup my files using the CCP, a message appears and asks me to do this:
  from your phone, please follow the instructions below. 1 - Unplug the USB cable from the phone and your PC. I've done and what's happening
  (other things to do with my phone: 2 - go to settings-xperia-USB connectivity.3 - click on the USB connection mode)
  4. Select MTP, then OK. 5 - connect the USB cable with PC and telephone)
  I did, but a message pops up saying: connect the USB cable to the phone and your PC. If the CDP companion does not continue in 30 seconds
  Unplug the phone and reconnect it. I did, but a message pops up saying that CCP could not connect to the phone, please
  Disconnect, then reconnect. I did, but to no avail. Still get this message. I am running Windows XP sp3.
  Can someone tell me if I missed something I need to do?

  I always get a notification to my computer screen saying that my phone (D6502) Z2 that Sony xperia is connected. I press on the message

  go to the PCC, but nothing happens, I get another message saying that there is no phone connected.

  Hi all

  I just tried to connect my Z2 to a PC with Windows XP sp3 and got a
  error when installing the driver, the solution
  was to install the Microsoft User-Mode driver
  Setting for WinXP. I think that this hotfix applies to all the android
  devices, but I thought it was worth a post if it records some Z2 users and other brand too - all phones from sony, Samsung, HTC, LG, a phone with android
  a long search.

  Thanks again to all who helped me.

• I have a problem with my keyboard failed on dell insirion laptop

  Reference op inspiron Dell laptop keys are missed ignition

  If the problem occurred after a windows update, use the system restore for a period prior to this update, and then run windows update > cut settings, recommended to disable the updates.

  If something else, explain what exactly means moving

• Small problem with preloader

  Hello!

  I made an animation flash (click here) and I put a preloader by a user by drag 'n' drop.

  So everything works ok but after the animation if I refresh the page (F5) preloader loops without charge nothing!

  If you need I'll join project .fla

  What's wrong?!

  Pls help me.

  THX!

  Ciao!

  who would do the work :-)

• Problem with Counter strike 1.6 on Vista

  When I run my CS on vista, suddenly an unrecoverable error message on the screen that says "the available memory is less than 15MG!:-some figures.
  What should I do?

  Hi KiwiSwat,
   
  Please use the Forum of responses of Microsoft Windows Vista.
   
  It seems that this problem with CS has been resolved by running it in Windows Xp compatiability mode.
   
  Right-click on the shortcut, choose Properties, compatibility, mark the run this program in
  compatibility mode for: choose Windows XP SP2.
   
  You can also check the below CS forum that talks about the same mistake and was fixed by
  Try the above steps
   
  http://forums.counter-strike.com/counter-strike-1-6/7601-error-available-memory-less-than-15-MB.html
   
  Please let us know if that helps.

  --------------------------------------------------------------------------------
  Nicolas Mathieu
  Microsoft Answers Support Engineer

• Gallery of images, problems with Flash player 9 and Opera 9

  Hi, I'm developing a slide show in flash (and php, JavaScript, XML).
  I'm coding in AS2 and classes.
  I use the class ExternalInterface to communicate between swf and html file.
  
  The problem is that the slide show does not work in Opera browser.
  It seems that it works very well, but after a few clicks, it stops responding.
  No problem in IE and FF.
  I search and search for a solution to this problem without success.
  
  I put an example of slide show here:
  http://www.coldminer.com/up/SW.php?thumbs=1
  
  The strange thing is that when I use really simplified versions of the code
  I use (with no externalInterface etc.) it works fine:
  http://www.coldminer.com/FTest/
  
  All those who have experienced similar problems and can guide me towards a solution.
  
  Version of the opera: 9.02 (8585)
  Flash player version: 9,0,16,0
  
  Thank you!
  
  * Edit->
  I found a solution, I replaced th ExternalInterface with 'Flash JavaScript intégration Kit',
  and all my problems with Opera has been resolved.

  Hi, I'm developing a slide show in flash (and php, JavaScript, XML).
  I'm coding in AS2 and classes.
  I use the class ExternalInterface to communicate between swf and html file.

  The problem is that the slide show does not work in Opera browser.
  It seems that it works very well, but after a few clicks, it stops responding.
  No problem in IE and FF.
  I search and search for a solution to this problem without success.

  I put an example of slide show here:
  http://www.coldminer.com/up/SW.php?thumbs=1

  The strange thing is that when I use really simplified versions of the code
  I use (with no externalInterface etc.) it works fine:
  http://www.coldminer.com/FTest/

  All those who have experienced similar problems and can guide me towards a solution.

  Version of the opera: 9.02 (8585)
  Flash player version: 9,0,16,0

  Thank you!

  * Edit->
  I found a solution, I replaced th ExternalInterface with 'Flash JavaScript intégration Kit',
  and all my problems with Opera has been resolved.

• Problem with updates on Windows 8 - Configuration has failed & returning Exchange

  First of all

  I want to apologize for asking questions about the problem which has been solved so many times...

  ... and yet it seems that no solution applies to / solved my problem.

  Let me describe my situation and context "briefly":

  I have install Windows 8 Pro, I have installed in September 2012. I had been provided with Win 7 and Win 8 activation as a computer SCIENCE student keys during my studies. I have not used 8 win a lot since I preferred Win 7 and I only wanted to test the 'product '.

  Judging by the time when previous updates have been installed, the system was launched several times in March 2013, December 2013 and January 2014. After that, the system "folded" so far. When I launched the system on 26.07.2015 there was like 50 updates that have been prepared (or wanted to be installed... Let's say "pending"). About 30 of them installed successfully. Then I double-checked. I used to double check the availability of updates when some fail to install (mainly from my previous experience that sometimes an update is no longer necessary when another installs).

  Now, to the point...

  I have 133 major and 3 optional updates that want to be installed. Everything that I select (few of them), or all of them fail to install. Installation begins normally, then needs to restart (all) and during the nex to the top starting, the updates can "Configuring updates... 98% ' and then fail and are starting to go back.

  The system is more or less vanilla installation with some basic drivers and the 3DMarks so I doubt that I've caused this problem.

  I've been googling and try to solve this problem for 5 days now, here's what I found:

  1. first of all, I tried sfc / scannow to see if there is any corruption. I received the message that some files were corrupted and could not be repaired. The launch of 6 and 7 of this order, I finally got the "Windows Resource Protection has not found any breach of integrity." (it is true however that I tried a lot of solutions in the meantime). However before that, the CBS.log newspaper included information that:

  Cannot repair Member "utc.app.json" file

  (also of telemetry ".") "ASM - WindowsDefault.json" and I think that 'Amd64\CNBJ2530. PBO' have been mentioned... several times)

  But as I said, from this moment I do not have this problem.

  2. because I had problem with CFS, I tried DISM.

  ScanHealth gave:

  The component store is repairable.
  The operation completed successfully.

  However, RestoreHealth was not optimistic:

  The restore operation failed. Be the source of repair was not found or the comp
  onent store is not repairable.

  The journal includes:

  Preparation of control system was updated.

  Summary:
  Operation: Detect and repair
  Result of the operation: 0x0
  Last successful step: any operation is complete.
  Total of Corruption detected: 0
  CBS manifest Corruption: 0
  CBS damaged metadata: 0
  Corruption shows CSI: 0
  Corruption of the CSI metadata: 0
  The Corruption of the CSI Payload: 0
  Total fixed Corruption: 0
  Repaired CBS manifest: 0
  Manifesto of CSI repaired: 0
  Repaired CSI payload: 0
  CSI store metadata refreshed: true

  3. the 'solution' next I'm focused on a system reserved partition. I came to the information Windows 7 uses 100 MB Sys. Reserved partition while Windows 8 uses 350 MB. I think I stumbled on information that it can be connected to the problems so modified the partition of provision (safely, in regards to the system reserved partitions and Windows 8) and increased the extra partition of 250 MB. This however proves to not be connected.

  4. some sources claimed that C:\Windows\SoftwareDistribution/download content may be the case. So after the Windows Update service has stopped I deleted the download content (I think on 1 try I deleted event pending.xml from WinSxS. Of course then I restarted the redownloaded updates of service, etc...

  5. I tried the update servers MS Windows Diagnostic.cab (just for the record, this tool renames pending.xml among others). This diagnosis is always problems no matter how many times I launch. It shows sometimes 2, sometimes 3 questions for example:

  

  Here are the main 'solutions' that I tried, but as you can guess, none of them worked. Just for the Windows registry has reported these problems viac Action Center:

  

  And I also found some information in WindowsUpdate.log:

  2015-08-02 01:27:28, error CSI 00000004@2015/8/1:23:27:28.681 (F) CMIADAPTER: failed. HRESULT = c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)]
  Element:
  [163]""
  [gle = 0 x 80004005]
  2015-08-02 01:27:28, error CSI 00000005@2015/8/1:23:27:28.681 (F) CMIADAPTER: out with HRESULT = c004f01f code [error, facility = FACILITY_ITF, Code = 61471 (0xf01f)].
  [gle = 0 x 80004005]

  2015-08-02 01:27:28, error [0x01803c] CSI 000000db Failed (F) execution of the installation queue item: SppInstaller ({1b265fd2-721c-4e59-ad55-9d102a5d1d7f}) with HRESULT c004f01f [error facility = FACILITY_ITF, Code = 61471 (0xf01f)].  Failure will not be ignored: a restoration will begin after all operations in the queue of the installer; Setup is reliable (2) [gle = 0 x 80004005]

  Here, the infamous rollback is mentioned. I was not able to identify the exact update (or updated) what causes these cancellations so I hope it's something I could be helped with at least. The internet is full of KBs that this cause so I can't count on that, at least for now. I also want to note that I tried everything under boot. And also can not clean installation since I have no more join the MSDNAA where I had as a student activation key. I hope that I could upgrade to Windows 10 without him in the coming months, so that's why I concentrate on getting this environment to work and migrate to it in time.

  I'll be very grateful to anyone who can help me with this problem.

  In & out.

  John

  Given that no one could help you, I myself helped ^^.

  First of all, to all those who have problems with the fact that their updates install suddenly, you must change the settings for Windows Update. Change the option other than an automaticall installation (I used the automatic download, manual installation). In this way, you can install the updates in smaller batches. Personally, I installed updates to 5 or 10 (or almost). The updates that have been tens of MB, I installed only. What struck me most surprised, I could (at the time) to install all updates. In the case where you wouldn't you know at least certainly update you need to solve the problems.

  After all updates have been installed, I turned on the automatic download and installation.

  Concerning

  John

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Problem with sync error: synchronization has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Hi, I started recently a problem with the sync on my desk. My partner Android and Mac laptop no problems when you attempt to synchronize, but office always gives the same error. I tried to disconnect from the desktop computer, erase all files, restart and then adding the Office to synchronize once more, but the error persists.

  All bookmarks on the desktop disappeared, but are still in my sync data and have no problem being viewed on other connected devices. It also tells me that the issue is not the sync server and that there is something unique to the desktop machine.

  I hope that this will not require a reinstall, but if all else fails, it's an option. I'll try to attach a log file once I put the question.

  I think the error message is in the title of the thread:
  
  Sync has encountered an error during synchronization: unknown error. Sync automatically retrying this action.

  Try creating a new profile as a test to check whether your profile is the source of the problems.

  See "create a profile":

  • https://support.Mozilla.org/KB/Profile-Manager-create-and-remove-Firefox-profiles
  • http://KB.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues

  If the new profile works then you can transfer files from a profile in the new profile, but make sure not to copy corrupted files.

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem.

  Original title: error explorer.exe, Normaliz.dll is missing please help me about the issue.

  Hello

  I get the error "this application has failed to start because normaliz.dll was not found. Reinstalling the application may fix this problem"Please help me!

  Well - so much for the expertise of committed Microsoft Support Engineer 'experts', but no answer to what I expected.

  See how it works for you:

  If you see a message like this:

  Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  It is in the case Log:

  Event type: Information
  Event source: Application Popup
  Event category: no
  Event ID: 26
  Description:

  Application popup: Explorer.EXE - unable to locate component: this application has failed to start because Normaliz.dll was not found. Reinstalling the application may fix this problem.

  Start explorer.exe, but the normaliz.dll file.  If explorer.exe is not able to run, you will not be able to do much with your system until the replacement of normaliz.dll.

  You can click OK for errors and finished up in the Task Manager where you can try to fix it.  The message can keep popping up from time to time, while you're fixing it, so just click OK to close the message.

  If normaliz.dll is missing, you can copy it from a working system to the system afflicted with the same version of XP and Internet Explorer.

  You will get a good copy and put it on a floppy disk, thumb drive etc and copy it to your system plagued by using Manager tasks.

  The normaliz.dll file must be located in the c:\windows\system32 folder and therefore is not a Windows file protected, making the Microsoft Support Engineer 'experts' suggest running sfc/scannow, which is just another one of their prosecution of wild goose that will not work, he'll never work and it will only waste your time (and they don't tell you how to run either - if explorer.exe does not start).

  Then engaged Microsoft Support Engineer 'experts' will offer to you develop a copy of the file from the XP installation CD you probably haven't, but it is also not on your XP installation CD, and you will have the same problem try their suggestions to 'try' to start in any any Mode without failure, so this will not help you.  These "experts" seem to think that the Safe Mode boot or boot will replace magically missing files, but it doesn't.

  You also will be able to properly run a browser on the system afflicted to go on Internet download one.

  There is a large computer security risk in the normaliz.dll from some website download.  The best idea is to get a copy of normaliz.dll from another computer that has the same version of XP and IE and replace it from a USB device (which you can access from the Manager tasks), or using a system that works, you can download one of my SkyDrive.

  You can still use the Task Manager to run the system restore and bring it back, but I've never tried and never use SR in all cases.

  If you have recently done a bunch of Microsoft updates, you may have also gotten IE8 so maybe that something was wrong here although the normaliz.dll is the same for each version.

  When you see the error, you can click beyond it and eventually arrived at your screen background image where you can press CTRL-ALT-DEL to start Task Manager. TM, you can click file, new task, Browse and edit the menu drop-down "Files of type" to all files that you can see all the files in folders.

  Go to c:\windows\system32 to see if normaliz.dll is really missing. If the error appears again while browsing, just click OK to get past it.  The explorer.exe tries to run and cannot until the missing file is replaced.

  If it's the only thing missing, you can get one from a working system of the same type as yours, copy on a Flash DRIVE or a floppy disk and always using TM, to browse, copy and paste it where it should be or you can download one of my SkyDrive.

  TM, you can still access your thumb or any other medium the same disk by navigating, copy, paste, etc very well all work.  You use TM to navigate to your thumb or floppy disk, copy the normaliz.dll good and then paste it in the c:\windows\system32 folder, where it is supposed to be.

  If things get worse, just return to TM and remove the file back where you were in first place and continue troubleshooting.

  Using a system that works, you can also download a copy of the file from my SkyDrive and put it on a floppy or USB thumbdrive and networks diskettes for the distressed system.  Sandalenet means wear you the system afflicted by hand.

  I downloaded a copy of XP Pro SP3 file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32

  Here is the link to my SkyDrive and you can get the file you need here:

  https://SkyDrive.live.com/?CID=6a7e789cab1d6f39&ID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you can not see the file extension (.exe, .dll, .cpl, .sys, .zip, etc.), but when download you them they will have the right extension.

  When you download the file (especially if you use Internet Explorer), when you get a chance to save the file, your browser is unable to save the file with an extension (by example, .exe, .dll, .cpl, .sys, .zip, etc) then you will need to manually add the extension appropriate to the file when you download the file before you save it.

  You can download the file without the extension, and then rename the file to add the appropriate extension.  You do not want to use a file called normaliz when the name of the file should really be called normaliz.dll (if the downloaded file has no extension, you will need to change the name of the file to add the appropriate extension to make it work.

  You then put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.