Had the malware Goonsearch earlier. Removed, cleaned, PC etc, but 'search the Web' (Goonsearch) option which appears again as a search engine. Impossible to remove!
I tried to remove it, and it doesn't go away-, but reappears in the next session...
The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.
To reset Firefox, perform the following steps:
- Go to Firefox > help > troubleshooting information.
- Click on the button 'Reset Firefox'.
- Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
- Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .
This solve your problems? Please report to us!
Tags: Firefox
Similar Questions
-
CS6 crash bridge I have cleared the cache etc but continues to work slowly then it crashes again.
Hi neilm,.
When you have disabled the cache, did you do via preferences > Cache Purge? Rarely, this method seems to work for everyone. It hasn't for me, because he never removes all hidden. But now press Cmd-Opt-Shift/Ctrl-Alt-Shift while launching Bridge and purge the cache and preferences will generally produce as clean a sweep as possible without going through the uninstall/reinstall bit. You need to configure your preferences for bridge all over again, but that shouldn't take too long.
If this does not stop smash, return and let us know your OS is and what version of bridge that you use. CS6, but the numbers that you see when you click on the bridge.
-
The address bar where I can type in the Web addresses does not appear on my Mozilla, please help me with this... How to activate it?
Hi kdwis,
Going to try view > toolbars and activation of the Bar of Navigation and in the bookmarks toolbar.
Hope this helps!
-
When I opened a web page link in "a new window" opens the link, but the information of the web page does not appear in the address bar. It is empty. If I open the link in a new tab, ho problem exists.
In addition, if one open a link in the tab without a location in a new tab in the same window and then go to the original tab, the address bar fills up with the web address.
Made it from several places, so it not dependent on location.
That behavior is likely to be the top caused by an add-on, and in your case the probable guilty is IE Tab 2, the different versions of IE Tab caused problems with Firefox 4 beta, including issues with the location bar not updated.
You can test to see if IE Tab 2 is causing your problem by disabling the it and then see if the address in a new window bar displays the address. If it isn't this add-on causing the problem, see Troubleshooting extensions and themes and problems of hardware acceleration to resolve common Firefox problems.
FYI, the IE Tab Plus add-on has been updated recently to improve compatibility with Firefox 4 beta, you can try this one instead. The latest version is available from http://coralietab.mozdev.org/installation.html
-
Site Web html content appears, but not embedded photos. For example, on the page of rei.com of goods, all data appear except the product photos. In Picasa, outlines of the pictures appear, but not photos. This problem occurred day after cleaning hard drive with OnyX Automator. I run the repair disk utility and rebooted the computer, but the problem persists.
Is he missing pictures then make sure you are not block images from certain domains.
See:- Check the permissions for the domain in the active tab in tools > Page Info > permissions
- Check that the images are enabled: Firefox > Preferences > content: [X] loading images automatically
- Check exceptions in Firefox > Preferences > content: Load Images > Exceptions
- Under the tab "tools > Page Info > media ' for blocked images (scroll images)
There are also extensions (Tools > Modules > Extensions) and security software (firewall, antivirus) that can block images.
You can use the following steps to check if the images are blocked:
- Open the web page that has the missing images in a browser tab.
- Click the site favicon (How do I know if my connection to a Web site is secure?) on the left end of the address bar.
- Click on the "More information" button to open the "Page Info" with the Security tab selected (also accessible via "tools > Page Info").
- Go to the Media of the window tab "tools > Page Info.
- Select the first link of the image and scroll down through the list with the arrow down.
- If an image in the list is grayed out and there is a check mark in the box "block Images of..." and remove this mark to unlock the images from this area.
-
left click in the web browser options are disabled in the latest version
In all previous versions of firefox, I had no problem in the drop-down list when a left click to open a link in a new tab or save the highlighted text or even to save an image on my disk. But now with the last update (20.0.1) I came across something that bothers me by the length of the drop-down list (too long, too much stuff on it) and half the options are disabled, making it harder for me to surf the web that I used to do. I took a screenshot of my question. I hope this will help. In addition, that my OS is windows 7. http://www.darkworlds.se/images/other/firefx20bug.jpg
It is a problem to have an out-of-date version of Firebug, most likely you have disabled the automatic update of the addons.
The best way to fix it is to go to tools-> Addons and then clicking the wheel upwards button near the search box. From there you choose ' Check for Updates ' and unless you need specific versions of an add-on, choose "automatically updated addons ' while you there.
You will probably need to update Firebug twice, because it updates a version obsolete and from there to the newest one.
It's the solution, I came on as I had the same exact problem, I tried to create a new profile and tastes.
-
WVC54GCA Missing WPA/WPA2 security in the web interface options
I just had a WVC54GCA and discovered that there are some missing configuration options in wireless settings:
On the web interface of cameras:
Web interface > base: Wireless Settings > [modify security settings] > Security Mode:
the drop-down list gives me two options: Disable WEP, but not WPA, WPA2.
I've upgraded to the latest firmware (1.1.00 build 02), but the problem remains.
Tried different browsers (Firefox 3.5, IE8) with the same result.
Is this a bug in the firmware? A defective unit? Anyone else having the same problem?
Try to reset your IE browser settings and then try to connect to your camera configuration page and check if you are able to find that the options... If it is still impossible to find the WPA/WPA2 Option on your camera, press and hold the reset button for 60 seconds... Release the reset button... Unplug the power cable from your camera, wait 60 seconds and reconnect the power cable...
Now check if you are able to find that the options... If still no so I think this could be the problem with the camera... I think that you need to replace your camera.
-
increase decrease text on the web page option
Hello
cases where the user wants to increase the reduction in their web page text?
How to increase the decrease text option (click) on the web page?
Hello
In this example,.
"+' and '-' symbols contain the href attribute to invoke the" increaseFontSize()"and"decreaseFontSize()"functions..." To even put href calls appropriate on the text (or) the image you want the user to this increase / decrease of things...
-
Even the tabs are wider than before to be?
you are very welcome - thanks for reporting!
-
This is a security update. It's boring and afraid, that it slows down my PC.
Hi Larry, thanks for your info
Refer to this post that addresses a similar issue and follow the suggestion given by Kosh Vorlon - a regular contributor here.
`~`
Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.
For enterprise customers, support for security updates is available through your usual support contacts.
`~`
How to hide an update in Windows 7
A. click the Start button, click principally made programs, and then click Windows Update.
(B) in the left pane, click check for update.
C. after receiving the results of the analysis, please click to see the available updates under the install updates button.
D. Please right- click the update (KB2538242), and then click hide update.
`~`
Refer to this post that addresses a similar issue and follow the suggestion given by Kosh Vorlon - a regular contributor here.
07/01 / 1102:47: 23:00
-
This is a silly question, but I'm not too tech savvy. I don't know I have changed something somewhere. I have the new Apple TV, and he had the new user interface, which means that the appearance of the applications using the applications, example, scroll down to Netflix, Netflix, etc. to research. This weekend he returned to the UI I've seen on my old Apple TV. Does anyone know why this could have happened and how I me the new interface to return? I did a reset to the original values Apple TV and it did not work. The tvOS is 9.1 (13U85).
Try to understand the issue.
Do you mean that you have an apple tv4, but he has a home screen display from the older ATV 2/3? You can attach a screenshot?
I have never heard of it and don't know how it is possible that they run entirely new software on the ATV4...
-
I am trying to learn the language of Malayalam. On some computers, the characters of the language appears. However, for my laptop browser characters will not appear. What download should I so that the characters to display. This is the Web site in which the characters/letters are displayed on other computers, but not mine:
http://mylanguages.org/malayalam_alphabet.php
Here is a picture with some characters:
http://www.entemalayalam.org/images/ammomma%20New.jpgDo all these computers have the same operating system?
As you can see OS X 10.5 comes with a 'policies need a' direction and that means that you don't have this font by default.
See you support such scripts, you must have the language and have installed fonts to display characters.
-
It runs pretending to install: each time restarting the computer up to date appears again; I look at all, I can find no cure for installation is complete on the web.
all others so far seem to fill. KB 2530548 tried to install several times. shows that I need to be updated after every stop.
Hello
In addition, check to see if this article helps you.
Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update
-
Help! Only recently (probably after the application of a patch) my IE8 8.0.6001.18702 worm abends in module xwr85739.dll worm 1.0.352.7 offset: 0001aa68 every time I want to search by using the search box in IE (Ctrl-E), the web no matter which search engine, I chose (Google, Yahoo, etc.). Any ideas would be very appreciated!
Ted
[Duplicate of http://social.answers.microsoft.com/Forums/en-US/InternetExplorer/thread/ed3ecb8b-2f31-4fdb-96a4-dffc86edbb72] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
can't understand why the gif file loop. Implemented 480x320pixels of photo frames 5 x 72pix / in in PE11, creating a layer for each. Each visible layer. Registered for the web. Checked to animate. The preview plays very well. But when I save the file and then click on the saved file to play, he re - opens the layers instead of playing the loop. The only registration option that appears is "IMAGES ONLY".
Using photoshop elements on MAC 10.6.8 11. Either I'll put this in wrong place or is there a hidden setting I need to change?
It you open in a web browser? That's where he plays, not in PSE, overview, or on your desktop.
Maybe you are looking for
-
Windows Driver DV6T-3000 graphics 8
Hey guys! its my first post. I need help with my computer hp laptop pavilion dv6t-3000/entertainment. I tried to install windows 8(64x), upgrade to windows 7(64x) and everything is going well, but after trying to update the graphics driver in Device
-
How can I get the drivers for xp usb / get the device can run faster in the listed ports
POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED
-
Error 0 x 80070424 in Windows Update when trying to install the updates.
Original title: in windows xp error 0 x 80070424. had downloaded antivirus system music next network.removed Center says this update is disabled when on that I'll update magazine, he says it is. When I go to windows update with what happens as soon a
-
Adobe reader - defective module error: Comctl32.dll
Running Windows 7 Home Premium, SP 1.Computer is ACER Aspire - laptop 4830TG with 8 GB of RAM, processor intel i5 - 2430M. Not sure when this happened, but I am unable to open Adobe Reader 10. The error indicates the fault module to be Comctl32.dll,
-
Why Windows 8 keeps expire when you compose emails and other writing tasks?