Problem with reading card SDHC 8 GB on Tecra R10

Similar Questions

• problems with reading card compact flash

  Hey, I recently bought a mac and I have a problem with she read my cards compact flash. I have a 64 GB scan disk card and a canon 5 d mark II camera.

  I get the error message that disk was bypassed and that the files could not be read. so I can't transfer my photos on my mac. I can, however, transfer them on a pc and then on a usb key that works on my mac. but this isn't the solution. I contacted apple support and was on the phone with them for over an hour and still no solution... who can help me?

  First thing to try is getting the pictures safely out of the map and then using the command format of the camera to erase and reformat - this will usually solve this type of problem

  LN

• problem with memory card reader

  bought an Acer C720 Chromebook in July, nine.  Now problems with memory card reader.  Sometimes he reads, sometimes it won't.  This can be corrected?

  Hi PatPeoples84,

  Yes it is possible, unfortunately it will probably come during the service.

  I recommend you contact the provider of the guarantee. In the United States, refurbished products are managed by another institution as new products. If you have any questions, thinking to send me a private message with your serial number and I'll help you get the correct coordinates.

  Thank you
  Cory

• HP pavilion f002sm 17: hp pavilion 17 f002sm problem with graphics card

  OK Hi again, you help me with my problem with graphics card yesterday I install the driver for my laptop and I can play games, but I I look for tools of diagnosis and is in writing which is r5 graphics card which is built on my laptop and I have A7 graphical please help amd a8 6410 win 7 32-bit

  Hi @zumzo ,

  I understand that you have installed the driver and it works fine.  When you checked the diagnostics you became confused because it says graphic R5 but you R7.

  According to the specifications of your laptop you have AMD Quad - Core A8 - 6410 APU with graphics Radeon R5 (2 GHz, 2 MB cache).

  Here is a link to the 17-f002sm HP Pavilion Notebook product specifications to confirm this information. I hope that this eliminates any confusion.

  

• Problem with read/write satellite U400 - 12 p PSU40E DVD on LG GSA-U10N

  Hello again,

  Another serious problem is the LG GSA-U10N DVD combo drive that comes with mine U400. For some reason he has serious problems with reading and writing to DVD. Doesn't depend on whether the media is expensive or cheap. It seems to read and write all the CD very well, however.

  I would like to avoid leaving service point (can take up to 3 weeks or more), because I need this laptop all the time.

  Is there anything we can do about it?

  My system - Vista Home Premium 32 bit has been restored to factory default and then fully update the site of microsoft, outside pilots. In addition, no other movements driver update has been made. It's just that you want it to be.

  Greetings

  > Doesn't depend on whether the media is expensive or cheap.
  Not really

  My notebooks drive can handle a lot of different CD and DVD from different manufacturers, there are cheaper and more expensive DVDs.

  I had a good experience with TDK DVD-R discs. In most cases, the burning procedure could be completed successfully
  But I had some problems with the other DVD writing.

  I think the whole issue is compatibility between the laser lens and DVD-surface and that's why I recommend you several DVDs from different manufacturers.

  Goodbye & good luck

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• See 5.1.2 problem with smart cards - reader to not see Office.

  Hi all

  We try to roll an office linked Clone pool that is used by our service accounts and as such, they need to be able to use for banking smart cards. We have installed all the necessary software on the machine of model (GemSafe Gemalto) and also one of our Thin Clients (Wyse V10L or C10LE) connected to the model directly via RDP with the card reader chip attached to ensure that different drivers installed correctly and all is well, the virtual machine is able to see the smart card reader.

  The problem comes when spread us these machines up to the pool, the smart card reader is not detected at all. We tried to connect from the Client light view or via RDP directly to one of the linked Clone desktops and both meet the same problem, that is, the drive is not seen at all. If we plug/unplug the drive of the Wyse terminal we see it be detected in the log of the events on the Client itself.

  Can what tools or newspapers we use side view or VMware to solve this problem?

  To confirm, in the settings to connect to the server by smart card authentication is set to optional. In Global political USB access is set to allowed.

  If need more information please ask and I will be happy to provide it.

  Thanks in advance.

  Right, we got to the bottom of it... and I am kicking myself!

  There is a GPO side configuration of the active computer. Administrative Templates/Windows components/Remote Desktop Services / Remote Desktop Session Host / Device and resource Redirection - do not allow redirection of card device chip.

  GRRRR!

• X 230-problem with Driver card reader

  Hello!

  I found a bug with the card reader Driver. I use Windows 8 x 64 and with installed Driver card reader, I often have a high CPU usage after waking from stand-by. It is caused by the SYSTEM process. In investigating this, I discovered that it was caused by the module of the driver for the card reader. I uninstalled and you have no problems since.

  Am I the only one to go through this and I have no disadvantage to uninstall this driver?

  Hi TPuserX100e,

  I'm glad you found the cause of this! I experienced it myselfand so far have not noticed any bad Effect to use the generic driver.

  I hope this helps!

• NB200 - do not read card SDHC 16 GB

  Hello

  When I insert SDHC in the NB200, autoplay starts but then just continues to run on a loop and the area of mixed content appears. Sometimes, I was able to see what is on the SDHC card if I click 'Show files' in the content area, but not always and still just autoplay starts again.

  Now, I can be stupid, but it is allowed to use an sdhc card in a SD adapter? Must be the same brand? I downloaded the fix both the driver sd player, but doesn't seem to work. Help, please!

  Thank you
  Simon

  Hi chuckles123,

  Did you check the manual if your laptop supports 16 GB SHDC card? This should be done first before you do things

  If your computer supports these cards, update the driver of the card reader and try different cards. Furthermore, is what 16 GB card exactly? I have a good experience with SanDisk cards, never had any problems with them.

• Tecra A4 and Win7 - problems with PCMCIA card driver

  I've recently updated my old laptop Tecra A4 - PTA42E - (in great condition however) for Windows 7 and it is now in the best shape ever except for the PCMCIA card. In fact, to have Windows 7 installed I had to rename the pcmcia.sys and pcmcia.inf files during the installation (to .old or .bak) otherwise the new operating system would not start. The same problem has been experienced by many other users Tecra A4 and the solution is available in a number of forums.

  Although I use no more than the PCMCIA card slot, I want to fix this for a reason: If, in the future, I need to re - install Windows 7 for some reason any on this laptop, I have to repeat the same process - rename the pcmcia.sys and pcmcia.inf during installation, in addition, the new operating system does not start.

  I do not understand that the original drivers from the card slot (Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7, but it is there any updated driver that works for windows 7? And if there's a how can I replace the old drivers in my system so that in the event of re - install Windows 7 I will not have to go through the same process? TI site is no help, and Toshiba does not all drivers to download.

  Last but not least, if there is a driver available, I used the card slot for 2 ports USB 2 or 3 additional which are really necessary.

  Thanks to the forum, in advance

  Hello

  The pcmcia.sys and pcmcia.inf files are part of the Windows System.
  This driver isn't provided by laptop manufacturer, but it is a Microsoft internal driver.

  You mentioned that the pilots of the original card slot Texas Instruments PCI-xx21/xx11 CardBus Controller with UltraMedia) are not compatible with Windows 7.

  To my knowledge, this driver does control not the PCMCIA location but this driver controls the card reader that supports the MMC card, SD card, card xd picture card, SM card, Memory Stick and Memory Stick Pro.

  However, the Tecra A4 is very old model of laptop. The driver will not be updated for this camera and it looks like Windows 7 drivers never had to be released the driver Toshiba UE

• Problem with video card satellite A500-1GH (I think...)

  Hello

  I'm having a problem with my A500-1GH. Randomly the screen goes black and then recovers by showing a message "display driver stopped responding and was retrieved successfully." My graphics card is Nvidia GeForce 330. I read many things, but all reviews were old - since the beginning of the year and nobody has solved this problem then. Do you know if there is now a solution for this?

  The laptop is brand new (respectively the windows is brand new) and the drivers and bios are up-to-date.

  Thanks in advance :)

  Hello

  Yes, it is a known problem with the vga driver in this forum. Already, you said it yourself, nobody has solved this problem :( I can just recommend you try to install a vga from nvidia.com driver. In my case, I have NVIDIA Gt 230 M, driver update has solved.

• Qosmio G50 - problem with graphics card or fan problem?

  Over the last year, I bought myself a Qosmio G50 at the beginning it seemed very nice and kool or so I thought until after the expiration of the first year, I noticed a small problem with my laptop.

  1. my fans are loud and sometimes they overheat, whats worse I can't clean my computer laptop but because fans note my fans were quite
  the first year to have my laptop, so I have no idea why they are noisy, they shouldn't be doing this right?

  2. now that my fans are not clean, I'm in trouble, play with my video games, at least those who need the video card.

  3. while I play my games I have noticed how the fans or the video card video game a little speed and not the game, but you get the idea, it was bugs me for everything now.

  Here is my last question for Toshiba support here
  Qosmio G50 laptop Fans can be replaced? If so, how much would it cost?

  What are the causes of the nose of the fans to make it so hard?

  More help on my problem would be welcome.

  If you have any questions for Toshiba support service then you are on the wrong place here. This is the forum user.
  Maybe you should contact the nearest authorized service provider and ask it.

  They can clean up your computer is turned on in a professional manner. After cleaning of the cooling and ventilation of cooling grid will be dust-free and run with low speed.
  The material can be cooled properly.

• Problem with graphics card

  Hello!. I have a problem with my laptop. So I know that when I bought my laptop it has an AMD HD 3450 graphics card but in dx diag, it shows that I hava a Mobile Intel (r) 4 Series Express Chipset Family and I don't know why. Could you please tell me why it doesen't recognize the graph of amd or at least if intel is better than amd, and in this case can you tell me the model intel please.

  Answer as soon as possible. Thank you!

  Hello @CrazyWolf ,
  
  To get your question more exposure I suggest you post in the trade forums since it is a commercial product. You can do to commercial Forums.
  
  Even if it is a Commercial, Switchable Graphics function product allows you to switch between the use of the graphics card Intel and a discrete graphics like AMD controller in a computer. For example, you can switch between the battery life improved graphics Intel when running on laptop battery power and performance capabilities of the graphics controller while the laptop is plugged into current alternative. Your laptop automatically goes to the Intel graphics card if the computer switches to battery power, or he can pass to the discrete graphics if the computer is plugged into current alternative. Some computers use third-party software to perform the switch.

  I hope that would explain it.

  Thank you.

• Problem with a card its Realtek ALC888

  Hey all

  I have a problem with my pc and sound card.

  I have a

  HP Pavilion Media Center TV m7739.sc desktop PC

  with an ALC 888 audio DAC.

  I got an Nvidia graphics card in the pc. And have now a pc with an lcd screen and a projector in. But the sound is not work enymore. Only if the launch the LCD with a HDMI cable. Somone have the same solution of this problem?

  my pc run windows 7 64 bit right now, but before he run Vista pc came with Vista system

  I have lookend a support site Hp and couldent find the right drivers I tried a 64 bit vista driver but works dossent

  and I tried the realtek site but with the same sollution on.

  I can see if I run the program add menu there is the pilot but not in programs or down to the level of the office.

  Hope so, will somone and can help me with this

  THX all and happy day all the

  MVH

  Martin Nieslen

  Hi, Martin:

  You must go into your BIOS (press the F10 key to the HP splash screen). Enter the menu of your BIOS, and if it has a device configuration menu, or something like that, you have to find the menu for your on-board audio setting.

  It is probably set to Auto. You must change this setting from where it is now, on " Enabled". Save the setting here and when you exit the BIOS.

  Now, your integrated sound card should work and your HDMI sound should work.

  Paul

• HP Slimline problem with video card?

  Hello

  I got a Slimline s3020n for a few years and have never had a problem with it. A few days ago when I turned it on there is no picture on the monitor except the box that is displayed when you turn it on and it says: "no signal". I plugged into another computer to the screen to see if the monitor was the problem and it worked fine. I swapped the hard drive thinking that might work, but still had the same problem. All lights turn on and it seems that everything works (hard drive, fans) which leads me to think, maybe it's a problem with the video card. My question is if you have advice on what could be the problem and I think that the video card is integrated into the motherboard, so I have to replace the whole motherboard to fix this. Thank you.

  -Chris

  Chris,

  Your PC has built-in video on the motherboard.  If it is simply a matter of graphic, a low profile card could be added to the system.   However, you can view the following link - depending on when you purchased your product - you may qualify for an extended warranty - the problem, he describes sounds similar to what you mentioned.  I found this on the page of the product of the s3020n, btw.

  http://support.HP.com/us-en/document/c01514044

  -dm (an employee of HP, but the time and the comments here are my own, not my employer)