Problem with SAS 6/iR on PE 2950 III

Similar Questions

• Having problems with Games for Windows Live in Fable III for PC.

  I was directed to go here after calling a support number. I'm about to go crazy with the evasive of supported client I received.

  Basically, the problem is that I can't download things off the Windows Live Marketplace in Fable III for PC. It's a question that I had on my old laptop with Windows 7, but my new has Windows 8, so here I am. I thought that my laptop was the question, because it was so crappy, but I was disappointed to see that I've always had problems. I get an error code (80153003) everytime I try a downloading something.

  I did not buy all the points, but I'd like to if the problem is resolved. I won't waste my money on something that won't work, if.

  Please help before my head explodes out of pure frustration.

  Hi Kasny,

  I understand that you have been redirected to several team support on this issue. We apologize for the inconvenience. We have a separate support team to help you better on Windows Live in Fable III. They are experts in your field of investigation and would be in a better position to answer your concerns.

  Post your request here: http://forums.xbox.com/gfw/games_discussion/default.aspx

  It will be useful. Back to us for any problem related to Windows. We will be happy to help you.

• GPIB-ENET/100 problem with NEITHER 488.2 v2.5 under Suse 10

  Hello

  I installed "NOR-488. ' 2 (Linux) Version 2.5 for Linux - 32-bit ' under Suse 10. Now, I try to add the GPIB-ENET/100 with gpibexplorer but failed:

  1. I have connected the GPIB_ENET/100 directly to the computer (eth1) with a crossover cable.

  2. as a result of gpibexplorer guests, I observed the PWR/RDY LED is orange flick so configured IP address/hostname as 192.168.1.2.

  3. then I clicked on the button 'search for GPIB-ENET/100', I had 'no device to display.

  4. I configured the IP address/host name as 'NIENET', which is the default hostname printed on the rear side of the unit and got the same result at step 3.

  5. one thing I need to mention is that I installed nienet-linux - 1.2 before and the ENET box didn't work with it either. I put

  192.168.1.2 NIENET gpib0
  

  in the file/etc/hosts and I have deleted all the files of this facility.

  The State of the network types arenetstat - rn)

  Kernel IP routing table
  Destination     Gateway         Genmask         Flags   MSS Window  irtt Iface
  192.168.1.0     0.0.0.0         255.255.255.0   U         0 0          0 eth1
  134.105.192.0   0.0.0.0         255.255.248.0   U         0 0          0 eth0
  169.254.0.0     0.0.0.0         255.255.0.0     U         0 0          0 eth0
  127.0.0.0       0.0.0.0         255.0.0.0       U         0 0          0 lo
  0.0.0.0         134.105.192.1   0.0.0.0         UG        0 0          0 eth0
  

  and the Ethernet card type isifconfig)

  eth0      Link encap:Ethernet  HWaddr 00:0A:5E:52:48:51
            inet addr:134.105.193.25  Bcast:134.105.199.255  Mask:255.255.248.0
            inet6 addr: fe80::20a:5eff:fe52:4851/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:54226 errors:0 dropped:0 overruns:1 frame:0
            TX packets:15248 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000
            RX bytes:17829035 (17.0 Mb)  TX bytes:3468412 (3.3 Mb)
            Interrupt:177 Base address:0x6000
  
  eth1      Link encap:Ethernet  HWaddr 00:11:2F:AE:5D:55
            inet addr:192.168.1.1  Bcast:192.168.1.255  Mask:255.255.255.0
            inet6 addr: fe80::211:2fff:feae:5d55/64 Scope:Link
            UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
            RX packets:5 errors:0 dropped:0 overruns:0 frame:0
            TX packets:285 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:1000
            RX bytes:2950 (2.8 Kb)  TX bytes:12186 (11.9 Kb)
            Interrupt:185 Base address:0xb000
  
  lo        Link encap:Local Loopback
            inet addr:127.0.0.1  Mask:255.0.0.0
            inet6 addr: ::1/128 Scope:Host
            UP LOOPBACK RUNNING  MTU:16436  Metric:1
            RX packets:489 errors:0 dropped:0 overruns:0 frame:0
            TX packets:489 errors:0 dropped:0 overruns:0 carrier:0
            collisions:0 txqueuelen:0
            RX bytes:44592 (43.5 Kb)  TX bytes:44592 (43.5 Kb)
  

  My questions are:

  1. in GPIB, will I set of Configuration IP address AND host name or IP OR hostname? If it is "OR", they must be linked in what file?

  2. "NIENET" is the default host name. How to change?

  3. What is the problem with my setup?

  Thanks in advance and best regards,

  Weining

  Hi Weining,

  to be able to set up a NEW ethernet device, it must be connected to eth0 - otherwise the GPIB Explorer won't be able to find it. Which is clearly described in the referenced article, and there is no work around for this need.

  You can only configure devices on eth1 if they already have an assigned static IP address.

  Then please follow the steps below (summary of the article that you and I already linked):

  (1) connect the new ENET/100 to eth0

  (2) open the GPIB Explorer, select "New Devce" and click on the "Search" button to find the box.

  (3) select the found device and change its IP settings to keep the network connection on eth1 and leave the Explorer GPIB

  (4) now unplug the eth0 device and connect it to eth1

  (5) restart the GPIB Explorer, choose 'New' and enter the static IP address you gave the ENET box.

  Best regards

  Sebastian

• Problems with latest updates Windows (KB) do not install & repeated notifications via the taskbar icon

  Hello everyone,

  In my view, there are many people who seem to have a similar problem to mine, although I was unable to find an answer to one of my questions in this post.

  Description of the problem:

  Although my Windows Update is defined on download & install updates during the night hours every day, the latest updates, KB26333880, KB2572073and KB2518864 are not be installed.  I went to the Windows Update site to check my editing history.  He showed the green/white checkmarks next to all 3 updates.  The record also showed that updates have been tempted 3 times during the night.  After clicking on the button "Express" on the Home Page, the results show 3 above updates, but show "0 bytes', then '0 download time. '

  To me, this indicates that there is no update to download, despite the yellow Shield of Notification of update continues to appear in the taskbar.

  Corrective measures attempted:

  1. I tried to download / install twice unsuccessfully using IE8 and FF (including restarting the computer).

  2. download & run the program MS Fixitattempted, but received a message which read, "an unexpected error has occurred, please try again later." No. error code has seen with this message.  (I could RECORD the program on my desktop... just couldn't run the establishment).

  3 tried to search for the presence of these updates using start > run > %windir%KB###.log (where the # is the individual number of update KB).  Every time - a message appears indicating that the file is not found.

  4 looked at the Add/Remove Programs list (with the Show updates checkbox checked).  No updates KB mentioned above could be found.

  5 with SAS, MBAMand Outpost Security Suite Pro scans revealed no malware/security issues.  (SAS and MBAM are used only as scanners on request).

  This problem with the updates does not download & repeated notifications being indicated in the taskbar has occurred many times before.  On this occasion, I called Microsoft several times before finally, my computer remotely accessible support person and spent about 50 minutes to fix the problem.

  (Also, it is noted that almost every support person I spoke with has always tried to tell me that MS is not help with the problem of this type.)  I had to be rather several in my reply... tell the person that MS IS in fact provide assistance free security-related Windows updates.  They now provide free assistance is unknown). Besides... I have more a phone number for States anyway.

  My questions to the community:

  1. is it possible to download & install these 3 updates?

  2 is there an explanation as to why MS Fixit program will not be installed, and if so, are there certain corrective measures I can take which will allow me to download & run this program?

  System Specs:

  Desktop Dell Dimension 3000 Tower;  WIN XP Pro SP3.  2 GB OF RAM;  3.00 gHz CPU;  Outpost Security Suite Pro.  MBAM Pro (on request only).  SAS (on request only);  SpywareBlaster;  IE8 & FF

  Thank you for your time and help, review!

  Pete C.

  See the RESPONSE message in this thread-online http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_update/security-updates-kb2633880-kb2633870-are-not-being/49ed2fe1-6782-4498-814a-ccfa6ec1dfc9

• Problems with the sound on my PC (i.e., no noise at all). m ' said that the Sndvol32.exe file is missing

  I have problems with the sound on my PC (i.e., no noise at all).  He told me that the Sndvol32.exe file is missing.  I went through the 'fix - it' and the solution is to extract the file from the Windows XP CD.  My PC did not come with it - otherwise, how can I get this file?  Thanks in advance!

  Most of the people do not have a genuine XP bootable CD.   This is good advice if you have a true bootbale CD, but given that the majority of people have never seen one in their life, why start there?  That's why this kind of troubleshooting tips kill me...

  The fix it will not help you.

  This will help you:

  I downloaded a copy of the file you need on my SkyDrive (everyone has a SkyDrive for file sharing).

  You can download it and when you do, place a copy of the file in these two folders (assuming that Windows is installed on your C drive):

  c:\Windows\System32
  c:\Windows\System32\dllcache (this is where XP keeps backups of important files).

  Here is the link to my SkyDrive and you can get the file you need here:

  http://CID-6a7e789cab1d6f39.SkyDrive.live.com/redir.aspx?RESID=6A7E789CAB1D6F39! 311

  When you see the files available for download, you will not see the extension of file (.exe, .dll, .cpl, .sys, etc), but when download you them they will have the right extension.

  You have to put the downloaded files in the correct folders on your system.

  That may not solve all your problems, but at least you will be spending this part and we can then fix the rest.

  Of course the file must never be missing, so something has badly haywire.

  If the system is working properly, what do you think has happened since the last time, that he did not work properly?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  No matter what you use for the antivirus/antimalware protection, I followed with some other respectable malware scanners, and then fix any problems:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• R415 replace H200 PCI with SAS 6/IR, S300, or cables...

  Hi all

  I have a R415 with a H200 in the PCI-e slot. I need to remove it to make room for a different expansion card, so need to find a solution to the problem of connecting the hard drive that leaves.

  We use a network SAN for the host server is a simple 2 disks configured in RAID 1.

  So far, I see that I have 2 options:

  (1) that connect the HDDs for SATA connectors on board, but this would involve the replacement of backplane and I guess therefore replace the power and data cables.

  (2) using the integrated module of SAS by adding a compatible SAS 6/IR, map S300, allowing the use of the bottom of existing basket and wiring.

  Someone at - it a recommendation on the option?

  OS is Server R2 of 2012 I think excludes the S300 if I read...

  See you soon!

  [Imgour] (http://i.imgur.com/xv6RcJE.jpg)

  I solved this problem with a Dell PowerEdge R310 Non Hot-Swap Drive Cable (C450M), removed the bottom of basket and the RAID card and connected the drives directly to the motherboard instead. Of course you lose the RAID function by the problem in my case it was not

• Unique problem with selction on the table (Query Page)

  Unique problem with selction on the table (Query Page)
  
  I have a VO data Bulletin Board, with a transitional attribute for selction unique column.
  My requirement is that I need to identify the line that was selected in the table.
  
  I associated with fireAction singleSelection column, such that whenever the user selects the line
  I'm looking for that VO using some rowIterator.
  But when running the loop of the transient VO that is mapped to the singleSelection variable is the show as "n" / NUll
  for all the lines...
  
  So how do you identify the selected line in singleSelection to a table.
  
  -Sasi

  In the property inspector of the element for which you've put firePartialAction, you can find a property named "parameters". That mention primary key as your setting.

  You can get the arameter using pageContext.getparameter ();

  -Anand

• problems with, phone, 6, Bluetooth kit, Nissan, after update, for, Rios, 1.0.2

  After the update to ios 10.0.2 - trying to use bluetooth to call my vehicle, it says: "this article is not in your phone book." How can I solve this problem?

  Greetings, joybelino1!

  Thank you for joining the communities Support from Apple! I can't wait to see that you are having problems with your Bluetooth in your car! The good news is that Apple has a great article that will help you with measures to try to resolve the problem. Read this article to gethelp to connect your iPhone, iPad, or iPod touch with your car radio. Even though he talks about problems with the connection, it also has the steps for other questions you may have once connected.
  
  

  If you use Bluetooth

  1. Consult the user manual of your car stereo to get the procedure to a Bluetooth device.
  2. On your iOS device, drag up to open Control Center, then press ontwice to turn on Bluetooth and turn it back on.
  3. Restart your iOS device.
  4. On your iOS device, Cancel the twinning of your car radio. On the screen of your car désapparier your iOS device and any other device. Restart your car and your iOS device, then pair and connect again.
  5. Update your iOS device.
  6. Install the updates to the firmware of your car radio.
  7. If you still not connect, contact Apple technical support.

  Have a great day!

• Anyone having problems with WiFi connectivity after upgrade to Sierra?

  I was wondering if anyone else knows issues with WiFi connectivity since the upgrade to Sierra 10.12? I have not had any problems with connectivity WiFi previously on El Capitan. Now I have regular randomly loose connectivity. My internet is cable and when it is connected I have a 100% connection. My details of iMac and I have used only 10% of my storage.

  

  No problem with my iphone 6.

  Hello AspDesigns,

  I understand that, since the upgrade to Mac OS Sierra, your Mac seems to have trouble staying connected to Wi - Fi. Fortunately the diagnosis built-in wireless can help identify the source of so much trouble.

  Search for Wi - Fi using your Mac problems

  See you soon!

• Problems with mail after switching to macOS Sierra

  Hey all

  After having recently upgraded to macOS Sierra, I am unable to read my mail.

  I get the following error every time I check on "Get Mail".

  There may be a problem with the mail server or the network. Check the account settings "*" or try again.

  The server returned the error: Mail could not connect to the server 'pop1.tribcsp.com' using SSL on the default ports. Verify that this server supports SSL and that your account settings are correct.

  What does this error message mean and how can I solve this problem.

  Thank you

  Hi Michael,

  I see your message that you get an error in the mail indicating that there is a problem with the mail server or the network.  To help get this problem resolved, I suggest that you follow the steps below:
  

  If mail refers to a problem with the mail server, or the network

  Mail will say that it is impossible to connect due to a problem with the mail server or the network. For example, the message may refer to a connection that has expired, or too many simultaneous connections:

  

  If you are connected to the Internet, but the connection has expired, your email provider might be affected by a discontinuance of service. Contact them or see their status Web page to ensure that their e-mail service is online. Examples of status pages:

  • iCloud mail status
  • Gmail status
  • Status of Yahoo mail
  • Status of the AOL mail
  • Status of Outlook e-mail

  If the message indicates the number of simultaneous connections, too many of your devices is check your e-mail account at the same time. Quit Mail on one or more of your other devices.

  If you are still unable to send or receive e-mails

  1. Make sure that you have installed latest version of the Mac software updates, especially if the problem occurred immediately after the installation of a previous update.
  2. In OS X El Capitan or later version, you can see a status icon and the short error message in the upper right of the Mail window, under the search box. The message may indicate 'Network offline' or 'Connection failed', for example. Click the message to see more details on the issue.
     
  3. Check your connection to the Mail connection doctor. It might be able to say more on the issue.

  If you cannot send or receive e-mail on your Mac.

  Take care.

• iMac 27 "mid-2011 - Intermittent problem with CPU fan running at full speed and sleep mode.

  Hello!

  My iMac 27 "has an intermittent problem with the CPU fan runs at full speed. Sometimes it happens at the time when I start it, sometimes only in my session, and sometimes only after a certain time. So does seem to be a problem of "heating".

  Second issue is with the mode 'sleep'. It may occur also at any time, at the start of the iMac, session, or after a certain time. But once he starts to go in mode 'sleep', when I wake up, it goes right back in mode after a few seconds and that it will continue indefinitely until I restart the computer.

  What could be?

  Please help me!

  4ntoine

  Here is my model of iMac:

  iMac 27 "mid-2011 model 12.2

  Intel Core i7 3.4 GHz

  AMD Radeon HD 6970M 1024 MB

  OS X El Capitan 10.11.6
  SMC 1.72f2

  Boot ROM IM121.0047.B23

  reset the SMC

  Reset the management system (SCM) controller on your Mac - Apple Support

• problem with playing the clash of clans

  I'm having some problems while playing the clash of clans on my 2 mini ipad screen does not seem to meet sometimes as if it was some sort of delay so I have to tap several times in order to use a filter or throw the troops on the battlefield.

  Hi Trinitygr,

  Thanks for posting in the Community Support from Apple! I understand that you are having problems with your iPad screen while playing a game. I like to play games on my iPad and I don't see how this could be a nuisance. I'm happy to offer assistance.

  Are you only had this problem when using the app clash of Clans, or does it happen in all applications? I recommend to start by following the steps described in this article:
  If an application you have installed unexpectedly closes, unresponsive, or does not open

  Take care!

• I'm having problems with an outdated Apple ID

  I have problems with updating Apps etc in my Apple account because he always asked an obsolete in sign.  How can I change this?

  Hello

  Go down to itunes apple ID Delete page homepage all ID and then add it back back.

  See you soon

  Brian

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• Problem with some fonts of symbols after the installation of the Sierra

  Hello

  I have recently upgraded the OS on my iMac late 2012 for Sierra, since doing so, I noticed a problem with several fonts.

  All symbolic symbols Apple to Wingdings fonts not correctly displayed in the font book. Apple symbols looks like a standard wheelbase of san, and other symbolic fonts just show as question marks '?' where the images should be.

  In text editing, that I can't even see the symbolic fonts like Zapf Dingbats and Wingdings in the selector. However, they all work well in Adobe Illustrator (CS5) and Microsoft Word 2011. Apple symbols still looks like a standard font.

  I already tried the following:

  1. check the fonts in font book

  2 fix the duplicates in the font book

  3. using the "Restore Standard fonts" option in the font book

  4 deleting a file in the folder Preferences plist Fonts

  5 deleted the cache of police and the database

  I'm out of ideas. Has anyone else had the same problem found a fix?

  Kind regards

  Greville

  I'm just to add that I used the recovery partition to do a clean install of Sierra on a hard drive external and then booted into it to see if it had the same problem.

  And he does. Wingdings and other photo fonts appear as '?' in boxes where the letters must be in the font book.

  So this seems like a problem with the way Sierra displays these fonts, not with the font files themselves.