Problem with SPA232D + SPA302D call tones?

Similar Questions

• Problem with the so-called calendar LOV...

  Hi all
  
  I have a problem with the calendar LOV. Normally, since there suppose to act like a LOV must not cause any trouble during his appeal on a required field (or pass through his WHEN_VALIDATE_ITEM trigger). Still its giving me an error message saying that the field must be entered. I want to be able to call the calendar when you perform an insert (so the field is empty) and put the date selected in the field.
  
  I also want to do it by using a button (next to the date field) to show the calendar. Now I used the DO_KEY ('LIST_VALUES') command to call the Key_listval trigger (as shown in the demo), but it seems like its works really well. Any ideas on this subject would be apreciated.
  
  I use Oracle Froms 10 g and I followed the instructions in the PACK of DEMOS for the FORMS 10 g (on this site) to build the calendar.
  
  Thanks in advance!

  If you are talking about the "so-called" Lov calendar implemented using forms-objects (blocks, etc.), you will have the problem with the elements required for the calendar will assign a GO_BLOCK that causes validation to occur, which will fail on the need for article.

  Solution?

  If you're on 10G, theres also an example with a java bean.
  If the 6i, you could create a standalone implementation of the Agenda-lov-features and make a call_form instead of a GO_BLOCK.

• Is anyone has problems with Dell support - called using micro

  Hello users of the Forum.

  My 2720 xps is not save anything when I use the microphone jack and little record (low volume) anything when I use the microphone. I also have questions about the use of large screen XPS2720 to extend my laptop screen using HDMI from laptop HDMI in the XPS. It does not either. Here is my support issues:

  1 has reached the customer. The person would put me on hold for each 2 questions simple and "research". His answers were vague, and then he said he would transfer me to Office work support as he has managed "inspiron" only! His transfer has failed and abandoned call.

  2. calls on the customer. Voice was smothered at the other end, when I mentioned, so the call dropped!

  3. calls on the customer. The person could not understand what I was trying to make (connect laptop XPS display and audio not sent / mic jack question), he tried to understand the question but kept in interpreting everything that I said mean that I was trying to extend the XPS specification to a monitor. I asked to speak to someone who knows the best product, he informed that he will put the prime contractor, and the abandoned call. Now I'm wondering if there is another meaning to call down when Dell is unable to answer.

  4 called again, the first person who I arrived before also picked up my call, when she heard what I was looking for the resolution, the call dropped.

  I don't know what is happening with Dell technical support. I would like to know if anyone else had experiences similar to my problems, especially when Dell support is unable to successfully respond to the question.  I really prefer to talk to actual dell support person in the United States (instead of people at offshore call center) to get answers to my questions. I tried to download the XPS manual and the link led me to a PDF doc, which indicates that it is the manual of the user, but everything, it's a manual to pay off the system - open lids, replace chipsets, back cover, display etc.. !! Frustrating :-)

  As Mary said, there are 2 ports HDMI on the XPS 2720. If you try to view the screen of the laptop on the XPS 2720, you must use HDMI-In port on the back of the specification XPS (#14 here).

  There are also press the input source selection button (#9) to select the input source. It may take a couple of presses until she "cycles" through all the choices and sees the laptop. So, wait a few seconds between the push to give him a chance to change the input source.

  And you should probably also go into Windows Display options on your laptop and make sure that it is set to use a second monitor...

  EDIT: Link fixed

• Problem with GCE international calls

  Hi all

  I have my router CME with two different link:

  the first is the VOIP and the second is POTS

  I need to allow international outgoing calls be routed via the link of POTS

  So I made these commands:

  voice pots Dial-peer 5
  corlist outgoing international call
  International call through TT description
  preference 1
  destination-model 000 t
  port 0/0/0:15

  I also configured the international calls through SIP TRunk by using these commands

  Dial-peer voice voip 2200
  corlist outgoing international call
  Description * International Outgoing Call to SIP Trunk *.
  translation-profile outgoing PSTN_Outgoing
  destination-model 000 t
  session protocol sipv2
  session target ipv4:192.168.2.51
  codec voice-class 1
  voice-class sip dtmf-relay rtp - nte force
  DTMF-relay rtp - nte
  No vad

  The problem is that calls always goes in the SIP trunk while I've specified the upper value of the preference for POTS

  Y at - it all missconfiguration

  Please help me it is urgent!

  Add "preference 2" under the VoIP dial peer. Please note that when you set the order of preference, the lower part, number preferably, more priority. Absolute priority is given to the counterpart of dial with preference order 0 and it is the default value.

  Manish

  -Does the rate of useful messages

• I have a problem with a toolbar called searchqu I remember not install, it does not allow me to have MSN as my home page, I removed the add on but still have the problem. Thoughts?

  had an add on searchqu somehow called installed. He does not think I have msn as my homepage. I removed add it on and still have the same problem.

  See the pages on searchqu and these discussions:

  • [816181/questions/816181]
  • [790833/questions/790833]
  • http://bit.LY/searchqutoolbar
  • http://www.ilivid.com/FAQ.htm#8

• A problem with delays in call loops and DAQ

  I'm programming a simulation for nuclear Rewetting for a reception centre to my company in Switzerland. It is a "fuel rods" heating and then fill the water Chamber. The pump starts automatically as soon as the core of the stem reached 750 C. After that, a requirement that the flow rate be checked to ensure the operation of the pump in the necessary conditions. If not, the heating must be stopped to avoid, well... meltdown. However, we must allow 10 seconds for the pump to respond, while allowing a rate of acquisition of data from 10 to 100 Hz.

  The challenge is that I can not add a delay in my other main loop delay all acquisitions, but I can't understand how to trigger a device loop (with data acquisition for the single channel flow control) and the main loop when the loop device determines if the flow a initalised, answering the main loop with the agreement.

  I think that a large part of my confusion is in the interaction between loops and knots of default comments labview's willy nilly. The only solution would be to have two 'core' loops that do not communicate with them, but rather to do the same thing while operating different synchronization? Tell me if you want I will post the file (even if its on a unnetworked computer and I don't think that it would also be useful).

  Thank you + Curran

  Here is a version 9.0.

• Problems with the outgoing calls and constant reboot

  I got my Droid on 12/23. It's a company phone, so I hesitate to consider the Verizon store.  It worked great until the 12/29 and then he stopped outgoing calls and began planting time in time, and then more often otherwise, now it hangs every two or three minutes.  It became useless as both a phone and for the most part.  I took the card SD and that did not help.  It always restarts on its own.  So I replaced the card.  I liked the phone for a week that it worked.  I really want to go back to a Blackberry, I'm sure that my company HIM people will probably try to convince me to do. Thanks in advance for any help you can give.

  I hope that helped! It's nice to have something to be such an easy solution!

• Problem with 2 updates, called from a batch file

  Hello everyone,
  
  I use Oracle 10 G and SQLPLUS to generate an export file on a Windows platform from a batch file.
  
  Everything seems fine, except for the part where I'm doing two consecutive updates. Whenever I do it with SQL anymore, only the two updates is committed, which means that I only have half of the data that I need to export. When I do it in an anonymous PL/SQL block, it works fine. I have not understant where is my mistake:
  

  UPDATE ITEM SET I_TRANSACTION = 'Y', I_TRANSACTION_DATE = SYSDATE WHERE I_ITEM_NUMBER IN (  SELECT I_ITEM_NUMBER
                                                           FROM ITEM
                                                         WHERE  I_TRANSACTION = 'N'
                                                                                                                                                                AND  I_SALE_DATE >= (SYSDATE - 30));
  
  UPDATE SERVICE SET S_TRANSACTION = 'Y', S_TRANSACTION_DATE = SYSDATE WHERE S_SERVICE_NUMBER IN (  SELECT S_SERVICE_NUMBER
                                                           FROM ITEM
                                                         WHERE  S_TRANSACTION = 'N'
                                                                                                                                                                AND  S_SALE_DATE >= (SYSDATE - 30));
  COMMIT;
  EXIT
  /

  Why is only one of these two update is committed? When I do my reel, I see either items or services, but never both. I have the same executed in a PL/SQL block and it works properly.
  
  I need to split updates into separate files?
  
  I made more complex stuff with SQL Loader, I wonder why this thing is annoying me.
  
  I'm sure it's only something trivial, but I don't see it right away.
  
  
  Thank you for your help.
  
  Bodart

  If it works in a PL/SQL block, then why not do it this way in your file?

  BEGIN
    UPDATE ITEM ...;
  
    UPDATE SERVICE ...;
  
    COMMIT;
  END;
  /
  

• Problem with ClientListener by calling custom

  I personalized declarative component:
  
  & lt; AF:commandImageLink icon="/img/trash.png' actionListener =" #{TrashButtonBean.deleteRow} "& gt;
  & lt; AF:setActionListener from = "#{row.rowKeyStr}" to = "#{TrashButtonBean.currentRowKetStr}" / & gt; "
  * & lt; AF:clientListener type = "click on" method = "confirmation ('confirm delete');" / & gt; *
  & lt; / af:commandImageLink & gt;
  
  It works but without ClientListener. Investigation with Firebug, I found this onclick event always returns false and the operation:
  
  < span class = "nodeLabelBox repTarget" > & lt; < span class = "nodeTag" > a < span class = "nodeAttr" says"> < span class ="editable nodeName"> id =" < span class = "editable nodeValue" > j_id_id4:j_id_id8:j_id_id14:7:j_id_id46:j_id_id1pc3 "< span class ="nodeAttr "says" > < span class = "editable nodeName" > class = "< span class = 'editable nodeValue' > xup" < span class = "nodeAttr" says"> < span class ="editable nodeName"> href =" < span class = "editable nodeValue" > #" < span class = "nodeAttr" says"> < span class ="editable nodeName"> onclick =" * < span class = 'editable nodeValue' > return false; " * "< span class ="nodeBracket editable insertBefore"> & gt;
  < div class = "nodeChildBox" > < div class = "nodeBox emptyNodeBox selected repIgnore" > < div class = "Nodelabelrequired" not > < span class = "nodeLabelBox repTarget" > & lt; "< span class ="nodeTag"> img < span class ="nodeAttr "says" > < span class = "editable nodeName" > id = "< span class = 'editable nodeValue'" > j_id_id4:j_id_id8:j_id_id14:7: j_id_id46:j_id_id1pc3:Icon ' < span class = "nodeAttr" says"> < span class ="editable nodeName"> class =" < span class = 'editable nodeValue' > xus "< span class ="nodeAttr "says" > < span class = "editable nodeName" > src = "< span class = 'editable nodeValue'" "> / ReusableComponentsTest-ViewController-context-root/img/trash.png" < span class = "nodeBracket editable insertBefore" > / & gt;
  < / div >
  < / div >
  < / div >
  < div class = "nodeCloseLabel" > < span class = "nodeCloseLabelBox repTarget" > & lt; / < span class = "nodeTag" > a & gt;
  
  Any idea.
  
  Kuba
  
  < / div >
  

  Jakub

  function confirmDelete(evt){
          evt.cancel();
          var choice = confirm('Confirm delete');
          if(choice == true){
              AdfPage.PAGE.queueEventToServer(evt);
          }
          else{
          }
          return false ;
      }
  

  ClientListener value type = 'action'

  Frank

• satellite pro a60 problem with game called "call of duty".

  I have a satellite pro a60 with skvideo ati radeon 7000 igp. I have the problem with the game "call of duty" because it is too slow. With my old laptop with ati igp 340 skvideo is not this problem.
  ATI have solved this problem with the new driver, but for this toshiba is not new driver, why?

  Anyone know where I can find 'new post' I did not know where to click to make a new post!

• problem with the easy line of site Web

  I have a problem with a site called easy line. It's using words on my ebay page to link to advertisements.

  No idea how I can get rid of him?

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  You need to scan with all programs, because each program detects a different malicious program.
  
  Make sure that you update each program to get the latest version of their databases before scanning.

  • http://www.malwarebytes.org/mbam.php - Malwarebytes' Anti-Malware
  • http://www.superantispyware.com/ - SuperAntispyware
  • http://www.microsoft.com/security/scanner/en-us/default.aspx - scan Microsoft Security
  • http://www.microsoft.com/windows/products/winfamily/defender/default.mspx - Windows Defender: Home Page
  • http://www.safer-networking.org/en/index.html - Spybot Search & Destroy

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • http://support.Kaspersky.com/viruses/solutions?QID=208280684

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Problems with speed of Pre adjustment knobs

  I have a problem with setting new calls abbreviated after the last update1.3.5.1. Since the last update I can't put a new speed dials. I go to the contacts app, select the contact that I want to put a speed dial. After you select this contact I tap the top left corner labeled contacts and select Set Speed Dial. After selecting this option, he brings me to a list of screen all possible short calls available and used. This doesn't happen and has not happened since the last update. Can someone tell me what could be wrong.

  I understood why my speed dials were broken (name and number with a white screen when you try to assign a speed dial).
  
  http://forums.precentral.NET/Palm-pre/234852-i-fixed-my-broken-speed-dial-issue-1-4-couldn ' t-game-speed - dials.html #post2285700

• One of the problems with the pirates on iPad here?

  I'm having a problem with what is called brandonvon.com on my iPad. She raised my google search engine hostage and locked me up. Any suggestions on how to get rid of it.

  They are not pirates, it is more likely adware.

  Go to settings - Safari - clear the history and data from the Web site.

  If that doesn't work, reset your device. This will not erase your data stored on the phone.

  • Press and hold the sleep/wake button
  • Press and hold the Home button
  • Press and hold both buttons until the display turns off and on again with the Apple logo on the subject.

  Alternatively, you can go to settings - general - reset - Reset all settings

  https://support.Apple.com/en-us/HT201559

• Problems with supposed strictly typed reference...

  I am having some problems with the so-called references strictly typed.

  Can anyone look at the related code (LV2010) and tell me why the example at the top of the page does not work and the background doesn't do. What more, the General method for only the top of the example page work?

  The discussion of strict and low conditions typed is quite short in the help documentation. Pointers to the relevant documentation would be appreciated.

  Thank you!

  You can not write the Strings property of [] of an Enum during execution of the VI.  If you need to do this, a common way is to use a ring of text instead of an Enum.

• Problem with the HP dv9000 Laptop

  Here's the question. I turn on the laptop and the screen stays completely black. The projector must enter on however I don't hear anything in the laptop running (ie the fans etc.)

  I have not yet tested it on an external monitor, but will be soon.

  I guess the problem is the motherboard and I need to replace it. Does anyone have helpful advice.

  There are known problems with that model, call HP and quote the following article:

  http://support.HP.com/us-en/document/c01087277

  If your problems are one of the symptoms listed, they should fix it for free.

  See you soon,.

  r.