Problem with the binding of AutoCAD files
I have Dreamweaver MX. I had my site running on my place of work on Netfirms, but when I switched to its new host. Many broken links and now I can not get my AutoCAD files to open. I get the error that the page is not found. I looked online, bought books, called support, and I am puzzled. The files are loaded and linked. I checked all the links on my site. I had a problem before on Netfirms and found how fixed by adding 'download' in front of AutoCad. Any suggestions are welcome. It acts as the files are not loaded. Here is the site. http://69.80.208.228/asmproductscom/Woodcore%20Details.htmThank you for your time.
Finally, I had, but I had to winzip them and then upload them. They would not charge in form of AutoCAD files for reason. I could load images and anything else, I put in the same folder, just not them.
Thank you for your help.
http://www.asmproducts.com/FS%20Details.htm
Tags: Dreamweaver
Similar Questions
-
There is not much information in the doc around the new configuration of static file. Someone at - it an example of this dads.conf he file should look similar to static files? Everything else seems to work fine - it's my only hang up now.
Thank you!
Exact pop-up message:
There are problems with the configuration of static files in your environment. Please see the section "Configuration static file Support" in the Guide of the Installation Application Express
I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file... All is ready! It works! YAY!
-
Error message when downloading Photoshop element 12: (I bought the license in a store)
Berthelman arvato-
Download Manager error-
Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200
== > Les DEUX @ and phone number are fake!
Hi Mireille56,
The place where you are trying to download the software.
[email protected] is not an email from Adobe Support.
Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
Kind regards
Rave
< translated="" via="" google="">
Hi Mireille56,
Where you are trying to download the software.
[email protected] is not an Adobe support email.
Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM
Kind regards
Rave
-
Original title: saving photos and videos, common sense?
JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?
JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?
=============================================
I don't know if the following links answer your question, but
they may be worth a visit:Good luck and * proceed at your own risk *.
FWIW... There is a very long discussion (several pages) to the
following link:Cannot change the imported iPhone 4S photo
https://discussions.Apple.com/thread/3444951?start=0&TSTART=0More Discussion
iPhone 4S image properties is not compartible with Windows?
Editing can be done on the computer due to the error
"Windows Photo Viewer cannot save changes to this picture.
because there is a problem with the properties of the image file".
Any help?
https://discussions.Apple.com/message/17291884#17291884More Discussion:
We cannot turn a few photos in Windows 7 (but can turn others)
http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524A simple solution is to open the photos in paint or most other
digital image editor and modify it.Some people have reported success using the following free download
to remove the metadata.Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
http://www.SteelBytes.com/?mid=30&cmd=download&PID=15Here's a way to turn...
Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
the rotator Lossless JPEG free
http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/Free download JPEG Lossless rotating
http://annystudio.com/software/jpeglosslessrotator/ -
Problems with the conversion of Word files to PDF via macro
I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.
So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.
I show you the problem with a Word file, first converted manually, then with the macro:
First of all the image: If the file is converted manually, it seems that the Word file and fonts are included.
Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.
I use Acrobat XI and Word 2010. The macro command is:
' new name for PDF pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf") ' convert Word into PDF ActiveDocument.ExportAsFixedFormat OutputFileName:= _ pdfName, ExportFormat:= _ wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _ wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _ Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _ CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _ BitmapMissingFonts:=False, UseISO19005_1:=False
I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).
-
Help. Very stupid problem with the placement of word files.
As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:
Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]
The problem with the placement of text word said that the text is too big (Red Cross).
InDesign CS6 30 day trial.
Post edited by: Niebieski_Mak
Ok.
There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).
The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.
I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.
The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.
-
Problem with the creation of text file 9530 unit
Hello
I created the text file in the memory of the device "file:///store/home/user/sample/mytext.txt" with a text using my application. He created the file with the extension "mytext.txt.rem". While I couldn't able to read the same file.
I tested the same application with 8520 and its works very well... It creates the file "mytext.txt" only.
I don't know why the name of the text file adds extension ".rem" in 9530.
Could you please help me to findout the solution?
Thank you
SmartPhoneDev
You have enabled encryption. Have a look here:
-
Problem with the playback of media files
I'm unable to read the files directly by any player... Each time, I have to choose 'Open with' Option.I has even changed the Option default WMP or VLC etc... But again if I want to play another file... I have to redo the same process... How do I solve this problem... ???
Hello
WMP have not perhaps not all of its default settings. Go to control panel, click default programs, and when this window opens click Set your default programs, and then when that window opens click on Windows Media Player in the list of programs, left column and in the right column, click Set this program as default. Wait for the app finally assigning all faults and then OK and then close the Control Panel application.
Let me know if this solves the problem for you.
Kind regards
BearPup
-
Problem with the opening of PDF files
so my problem is that I can not put an Adobe Reader as main software to open PDF files.
I try with this
Select a PDF file on your disk. Right click, choose "open with > program chose. Select the drive, and then click the box that says "use the selected program to open this type of file.
but nothing happens when I select drive. It shows that even on the 9 and 10 version. I try to reinstall, and it does not help...
Please take a look at the response of Ramesh Srinivasan on: th-open-with-menu/76b17b64-2fe3-4c08-ac80-0ba80334dd8e http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/problem-wi
This should solve the problem.
Ankit
-
Problem with the Binding property
Hello
My question is quite simple actually. I work with a remote object, which is called a service, and when I do the following:
Variable1 = remoteObject.serviceCalled.lastresult; (both are an ArrayCollection collection)
Variable2 = remoteObject.serviceCalled.lastresult; (both are an ArrayCollection collection)
And after that, I change Variable2, then the data in Variable1 gets so changed, and I don't understand why he keeps to himself, and I can't seem to solve this problem. Even more, when I do:
Variable1 = variable3;
Variable2 = variable3;
And I change the variable 2, variable 1 is also amended. Can someone help me solve the problem please?
To make a new ArrayCollection from a former collection, do the following:
NewArrayCollection = new ArrayCollection (oldArrayCollection.source).
Note that any changes to the elements they share always appear in the
others after a refresh.
To make a really distinct copy, you will need to make copies of each element
the source and a new table of these copies.
-
Big problem with the plug-in download file!
It is impossible to download eclipse plugin and the plugin for MS Visual Studio.
I am in Korea and I'm trying to download this a lot but the interruption of the connection. I did my best to get these.
If anyone can share these plug-in for me?
I am bagging you please!
Contact [email protected] for help with this.
-
Problem with the color when sending file AE to first.
I am very new in the world of After Effects. I made a video where I asked a black and white hue on a color video. I cut out a specific color of the color video and
everything in the reading seems correct. The isolated color is exactly where I want it and the rest of the colors are made to be black and white. However, when he goes
Back to Adobe Premiere all color refers to the video and not isolated color I've done in my file of AE. I don't know this is a very simple solution and because I'm new to
This I skip a step which can be primary. Help is very appreciated.
Without knowing anything about your effect, structure of the layer and so now no one can tell you a lot. As a first step, make the timeline in the first. Very little of what makes AE is in real time in such a way that it would return immediately to first. Most of it must be rendered, give or take a few effects that have been optimized.
Mylenium
-
Problem with the installation and activation of Autodesk Autocad 2011
I'm having a problem with the Autodesk Autocad 2011 activation. After I download and install the software, there should I active and a window opens to activation. The problem is the window is empty and I tried closing and reopending the program. I tried to uninstall and reinstall the program several times and get the same result. I checked the site Autodesk solutions and tried what they suggested, but without success. Help, please.
Thank you
Matt
Hello
You can activate AutoCAD, through activation and the recording interface, you can activate your product 24 hours a day, seven days a week, through the Internet or by e-mail. Or the other option takes only a few steps to complete and requires your product serial number and registration information.
http://images.Autodesk.com/ADSK/files/autocad_2011_faq_us.PDF
Also try the suggestion in the given below link and check if this is useful to solve the problem.
http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10244471&LinkId=9240617
http://USA.Autodesk.com/ADSK/servlet/PS/DL/Item?siteID=123112&ID=10243884&LinkId=9240617
If this does not help, you must contact the support of AutoCAD to help you activate the product.
http://USA.Autodesk.com/ADSK/servlet/PS/index?siteid=123112&ID=2714854&LinkId=9240617
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I'm having a problem with the FireFox browser. I have attached two files that describe the problem. I have marked their A & B. A is how it should look like and B what happens once I have, I opened several tabs. I can get it back to normal if I click VIEW, click Customize. When the window customize appears that Firefox returns to its normal state. I have to click on the done button and go back to what I did. I tried to reset FireFox back to the default settings, but that has not fixed the problem.
It started happening a month. Is there a way I can fix this? Thanks for your help. I don't know how to fix my 2 attachments that shows the problem I'm having.
[email address removed to protect your privacy and security]Try disabling hardware acceleration in Firefox.
- Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
-
problem with the Finder - files and folders displaying incorrectly
After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).
This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.
Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.
I decided to do a clean install of the operating system but nothing works.
Is there some setting in Prefs I'm missing?
Hi there highland99,
Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.
Thank you for using communities of Apple Support.
Maybe you are looking for
-
The new App Store for El Capitan update has locked up my macbook pro. Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't. How in my machine to begin troubleshooting?
-
How to restore files from the Recycle Bin after that that they have been removed
How to restore the files that I have deleted by mistake? Mac Mini El Capitan 10.11.1
-
Windows6. 1 KB2259539-french - x 86 update which is prerequest for IE 9
When I tried to install Windows6. 1 KB2259539-french - x 86 update this message: Setup encountered an error: 0x8007000d invalid data What can I do? just this update every thing is fine with me.
-
After that WSUS installed and downloaded the most recent Windows XP and 7 updates, we encountered the following error: The Web page of the Intranet being viewed in Internet Explorer (8 or 9) is on SERVER_Aand the page contains a link to a file on a n
-
Audio does not not on Chicony Webcam
I recorded a video through the Chicony webcam on my Toshiba Satellite laptop, but there was no sound at all. I tried all the tips I came across the web, but none of them work. MY operating system is Vista. Help, please!