Problem with the BIOS boot image

Similar Questions

• HP pavilion n242se 15: problem with the BIOS software

  Hello
  I have HP pavilion 15-n242se and I have the problem with the software of the BIOS, because when I restart the computer it turns off completely and go back a few seconds later.
  Please, I want to again software for BIOS for Windows 10 64 bit
  
  Can you help me?

  SyrianCow

  Sorry for the bad news, but HP does not update the BIOS of your PC for Windows-10.

  They planned them to Win8.1, and you should have to do the upgrades at the time, BEFORE you upgraded to Win10.

  The HP BIOS upgrades are OS-specific version, so now that you have upgraded, you can no longer run these.

• Problem with the BIOS of the Pavilion dm4-3002sa bought in Belgium

  5 months ago I bought a Pavilion dm4-3002sa (English version) in Belgium, where I live (to have a QWERTY, AZERTY keyboard like most laptops sold in Belgium). I discover now that this particular model is not recognized on the Belgian support HP web site - I could only find it on the web pages of HP UK.

  A month ago I started having repeated problems (automatic stop & restart every 3-5 minutes), which indicates there is a serious problem with my BIOS. The test of memory fails.

  I contacted HP support Belgian and send the laptop for repair (they said that they will replace the current memory).

  HOWEVER, I have another question: If the problem is caused by an incompatibility possible download relative to the BIOS here in Belgium, while my HP laptop is clearly a UK version and not recognized as a model sold in Belgium?

  If so, this means I can continue to have the same problem even after service.

  Registration of the laptop as based in the United Kingdom would be a solution? (i.e. regardless of my address of residence...) So that the updates & downloads are fully compatible with this model?

  A big thank you to the one who can help me!

  The problem of restart is much more likely to be associated, in view of the results of the test of the memory of the memory. You should have asked to send remembrance to you, rather than send the laptop away. Memory modules can be customer replaced. It is quite easy to do.

  The only real difference between having a QWERTY keypad and a QWERTY keyboard is the way the operating system sees the way in which the keyboard as being mapped when you choose the keyboard layout.

  Your computer laptop dm4-3002sa is still a laptop HP Pavilion Beats Edition entertainment as well as the USA (United States (version.

• URGENT! problem with the bios to start the computer

  Hello

  I have a lenovo s12 notebook and I have the problem with the password of the bios. the bios was previously password protected and I wanted to get rid of it, so I opened the bios went in password management and tried to 'turn off' but apparently the system would not accept that option, while i went to the password field, then put the old password, and then I gave him 2 "drafts" enter enter since I assumed he wouldn't ask Word of past again... on windows it works like that, you put a blank password twice, and then it will not ask password again.

  now it's happened, it's that the system always ask the password on the bios, I can not enter setup again because the old password does not work after installing brief loading, it accepts either a blank password, I tried the generic password for phoenix bios which seems to be "phoenix"...

  should I don't have to go the hard way, open the computer and remove the cmos battery? Since it is possible to find it of course, since it is a laptop? does anyone know any other bios password "generic"? or I have seen that if you can build an external device then you can connect to the mobo and read the stored password on the mobo, but it starts to become a little too testy, I don't want to build and solder.

  Anyway any help greatly appreciated please reply to my email xxxxxxxxx

  Thank you very much

  Gabrio

  Edit: remove email address to avoid privacy

  Hi an welcome to Lenovo forum... Sorry... Here, there is a page for password lost or forgotten help Lenovo.

  If the password that you have forgotten/badly entered or other cases... is not one that can be reset, your options are to remember the password or get the motherboard & and/or replaced hard drive.

  Because these passwords are used to protect the precious laptop users to Community rules prohibit discussion of ways to defeat them. Locked this thread

  cordially KalvinKlein

• Tecra S2: Question of characters with the BIOS boot password

  This is my laptop:
  Tecra S2: Intel Centrino Mobiltechnologie mit Intel Pentium M processor 740 / XP Pro / 512 MB DDR / 80 GB/15 "SXGA TFT / CD - RW - DVD - ROM
  Model PTS20E-18S032GR number
  purchase 30/01/2006
  link:
  HTTP://DE.COMPUTERS.TOSHIBA-EUROPE.COM/CGI-BIN/TOSHIBACSG/SELECTED_PRODUCT_OPTION.JSP?SERVICE=DE&PRODUCT_ID= 106134 & DISC_MODEL = 0

  My problem is, that I give with the software Toshiba guard easily a password to start with 9 letters: "cjbasdahl." For safty, I write again the password. I do and write again, 'cjbasdahl '. The computer accepts the password because the first password is the same how the second password.

  When I start (boot) the laptop will have a password with 8 (not 9) letters. I can't use the password 'cjbasdahl '. What can I do? I form the password coz when I boot the leng even as the password or not?

  When I did find the password. What can I do?

  Hello

  The fact is that the BIOS password can be removed only by the service of Toshiba.
  There is no need of a special procedure that can be done only by the service man.
  There is no other way to make mobile accessible full

• Satellite Pro 4280 - problem with the BIOS password

  Hello
  I decided to revive my old laptop Toshiba SP 4280 but failed to get the system because he wants me a passowrd initially.
  I have tryied to get out a map of Moser for 24 hours battery - but it did not help.
  I tried a few passwords backdoor, like Toshiba, toshy99, but it did not help.
  I've successfully upgraded BIOS the most recent a 2, 70-TRAD, but again he asks me a password.

  Could you help me please with this problem?
  What can I do?

  BTW, I can't get into the BIOS Setup and select the source of loading (Hard, FD or CD) because I have to enter a password first.

  Thank you very much!

  Hey,.

  Unfortunately, I don't think that an authorized service provider can help you get rid of the password because they have special tools to do and how to do it. Maybe some jumpers must be defined, but I put t know

  On the Toshiba Web site, you can find a list of aspic call them and ask for help, all that s! ;)

• A problem with the BIOS Probook s 4540!

  I 4540 probook s laptop, two days ago, I updated the BIOS. I downloaded the BIOS from http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5269095&... After that, I could not turn on my laptop. He just had white screen and Caplock light flashes 3 times. Can you help me!!!

  Have you tried a RAM module in each slot or was used both slots at the same time?

  RAM problems can be with the RAM itself or the RAM slots on the motherboard.

  In case the POST test is false, although rare, you can try to restore the BIOS by following the steps in this document.

  You will need to download Support UEFI environment to create the USB stick recovery.  It can be found here.

  Let me know what happens.

• Problems with the treatment of images and tapes

  I have thousands of files that need to be addressed. I generated an action command, which, when used manually, seems to work. However, when I try to launch a process of file I get an error message indicating that Photoshop could not process the file at the end of the attempt of treatment. The files that it expel are severe bands where a gradient mask is supposed to fade the edges of the image of a light gray (made with two distinct layers and various gradients). In the action sequence I already changed the modes at 16 bits and added a color raster layer and noise was added twice for her and then changed the opacity and fill at 19% and 1% respectively. I wonder why I can do this and then save it as a jpeg file and don't see any banding, whereas when the files that I made cross, they have bands.

  To solve problems of the strips, I used a technique of dithering by changing modes at 16 bits (which I had failed to do in the previous sequence of action apparently) fill a layer of 50% gray color, pixelation, add noise filters set at 25% monochromatic x 2, then set the opacity of this layer (which is on the top) to 19% and fill to 1%. I flatten the image and then changed to 8-bit modes (that I did not also in the original action sequence).

  This solved a problem since JPEG files that appears crossed out in the gradient layers that I was trying to mislead and kept my files become too large. I don't know why the initial sequence of action failed, but when I used a batch sequence to show me a script error, I found that one of the steps could not be completed. I don't know why, but in any case, I rewrote the sequence of action and I am happy to say after a few odd issues of debugging, it works smoothly.

• problem with the position of image in the slideshow width 100%

  Hello Im having a problem with my slide show that is 100% browser width.  the slideshow container is set to a height of 300 pixels and the picture I inserted is about 1500 pixels in height.  I placed the image so it defined in a specific section of the image, but when I hit the 100% width button it positions the image down.  is this a bug or it's adjustable somehow?

  Hello

  What you encountered is the default behavior of the slideshow widget, which, once the value of width of 100%. I'm afraid at this point, you can not edit/resize the image. So, to do the same thing, you will need to remove the 100% width of the widget option.

  You may want to file is like a feature here request: ideas for features in Adobe Muse

• problems with the sequence of images in v30

  First of all, I'm a bit of a novice user in the teaching of science. I use this software to deliver the anatomy & Physiology TP laboratory where I take a sequence of images from several angles of an anatomy model and use the image sequence feature in InDesign to link them together so that the student can drag the picture on the iPad to rotate the image and see the issue from several angles. This worked very well with v29 and students loved it. However, with the v30, with just a light tap of the image, it quickly reverses through many images, almost randomly, after the coup. This makes all our efforts on the worthless 3D appearance. I can't use one of these rotating images now until this problem is corrected, or tell me what goes wrong. Any ideas?  To learn more about how I have this set up? It works fine when I preview the file on my laptop. This is only on the viewer Adobe iPad application (which is used in the classroom). Thank you!

  The f

  For 6-8 images, I think I would use a MSO, instead.

• Problem with the Apple Core Image?

  Can someone confirm for me that there is a problem with Apple Core Image which has feature to DNG. I have problems with Nikon RAWs converted with DNG Converter. Once changes have been made to these DNG (in Lightroom 2.3) and the metadata and previews updated software (Preview, etc.) based on the main Image don't seem to use the embedded JPG (with applied adjsutments) but well the smallest thumbview, not up-to-date. I do not use the option "convert to linear" when converting.

  >... but Apple OS uses its own rendering system (part of Mac OS) to display

  > previews in Finder. It is completely independent of the melting of LR,

  > or LR of embedded previews.

  Hi Eric - so a software program that uses Apple CoreImage to render a LR

  "adjusted" DNG will be or does not display a picture of the DNG that has been

  cropped.

  Will not. In general, LR settings (e.g., cultures, fill light, etc.) are not

  applied by Core Image. These types of adjustments are specific to each flood

  converter.

  Eric

• Problem with the BIOS of the laptop Portege M100

  Hello
  I have a problem to start my laptop. I lose my supervisor password and now I can't start my laptop. Can you help me please. ! I try to reset the bios, but I ´can can't find the cmos jumper to reset the bios.

  Hi stan

  Sorry, but you should be smart enough to know that this kind of information is not for advertising. On this way, each stolen unit can be started. The best solution is to contact the Service partner and they can remove the password.

  Good bye

• I have a problem with the BIOS update. Satellite A20-S103

  She asks "Plug adapter AC." but II use my laptop with power supply only. And I have not adapter how can I install and upgrade my wood someone has idea?

  Model satellite A20-S103.

  I have 1.10 BIOS already I need 1.40

  [Edited by: admin]

  Hello

  as you wrote everything should work!

  The drums plugged in when you did the update to the BIOS?

  Are you using the original power supply?

  Do you use the Toshiba Power Saver? If so, set it to default!

  Rudi Bye

• HP Pavilion Notebook N9R33EA # a: problems with the BIOS update (HP Support Assistant)

  I was offered an update of software SP77359, which seems to me to be an update of the BIOS provided by HP Support Assistant. Version F.82Ap1. Two days ago, I updated the BIOS via the support and, on the report wizard got an other update via the support Wizard. I applied this patch to find that it was still an other BIOS update and now, which has been applied this third update has appeared. Please let know us how I do.
  
  The model number of my machine is actually N9R33EA #ABU (as reported by the Assistant to support) but ths was too long to type in the name of the product.

  Your laptop is a HP Pavilion Notebook - 15-ab208na (ENERGY STAR) for later use.

  I wouldn't update. Simply click the X to remove the download and install the list in the help Wizard.

  The current version on your laptop support portal is F.8.1

  http://support.HP.com/us-en/drivers/selfservice/HP-Pavilion-15-notebook-PC-series/8499306/model/8942501

• Reference Dell place 11 Pro - problems with the PXE boot

  Before buying a large number of these tablets (11 Pro 7130 venue), I have to ensure that they can be deployed from MS Configmgr (2012). So far, I have no chance for our test model to perform a PXE boot.

  Following the instructions documented by Dell here:

  

  I have a USB dongle to Ethernet Lenovo based on the AX88772B chipset... that is supported according to the documentation. However, try to perform a PXE boot, the screen hangs on the message:

  -----------

  check for the presence of media...

  on ipv4 pxe boot

  -----------

  After awhile, it starts up and then hard disk. BIOS version is A14.

  Any help would be appreciated!

  We have solved this problem by following these:

  

  

  .. DHCP basically has to manage a little different UEFI devices.