Problem with the commands pack/unpack

Similar Questions

• I have a problem with the command prompt.

  Original title: cmd.exe

  I have a system where this problem started a couple of weeks.   When I run a command to a command (any order), it displays the results as expected.  But if I run the command with "cmd /c command", for example "cmd /c date", the screen is erased before the result is displayed.  It is also a problem if I am using perl or python or any other tool when I run a system command and wait to capture the output.  There is always a pagefeed at the beginning of the output character.  Because this behavior started recently tried to restore the system to a point where I knew that this was not the case.   But that did not help.   Any ideas?

  Thank you
  JHS-

  OK, you can ignore it.  I thought about it.   I had created an autorun.cmd file which included a cls command.

  Sorry for the noise.

  JHS-

• problems with the command-line command pc

  on the side of mac, I work from command line. But on the pc side I can't understand this.

  on a mac, this is

  deleteF="rm -r "+myNumPhoto.slice(0,39)+"imaging/*";
        app.system(deleteF);
  

  on the PC I'm trying to do the same thing with this.

  deleteF = "RD/s \\TEST\test".

  It runs the command, but I get the system cannot very well the specified file.

  If I run the slashes on the other hand, it works not at all of the suggestions would be greatly appreciated.

  much of the problem was with all the obliques. They must return the characters. That said I ended up doing a string. Here's what I used.

      myNumPhoto=app.document.presentationPath;
      s=myNumPhoto.slice(0,42)
      s.toString();
      s=s+"imaging";
        deleteF="RD /S /Q "+s;
        addF="MD "+s;
        app.system(deleteF);
        app.system(addF);
  

  I had to delete the folder, and then add it in back on the PC because the command RD except no wildcard characters.

• Problem with the command line APEXEXPORT after upgrading to 3.2

  Hello
  
  After the upgrade to 3.1.2 to 3.2 Apex (upgrade went well), I get the following error message when you try to do an export of command-line applications:
  
  Exception in thread "main" java.lang.UnsupportedClassVersionError: oracle/apex/APEXExport (unsupported major.minor version 49.0)
  at java.lang.ClassLoader.defineClass0 (Native Method)
  at java.lang.ClassLoader.defineClass(ClassLoader.java:539)
  at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:123)
  at java.net.URLClassLoader.defineClass(URLClassLoader.java:251)
  in java.net.URLClassLoader.access$ 100 (URLClassLoader.java:55)
  in java.net.URLClassLoader$ 1.run(URLClassLoader.java:194)
  at java.security.AccessController.doPrivileged (Native Method)
  at java.net.URLClassLoader.findClass(URLClassLoader.java:187)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:289)
  to Sun.misc.Launcher$appclassloader$ AppClassLoader.loadClass (Launcher.java:274)
  at java.lang.ClassLoader.loadClass(ClassLoader.java:235)
  at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:302)
  
  Any ideas? It worked perfectly fine before the upgrade... I use Oracle 10.2.0.4 database JDBC jar files.
  
  Thank you
  Matthias Hoys

  Hello

  Machines virtual Java is backward compatible, so you can use the JDBC 1.4 with JVM 1.5 or later without problem, no need to download new classes.

  And Yes, I think that it is best to go directly to JDK1.6... Here I have 1.6 and use the tool to export Apex with the 10g JDBC classes without problems.

  Luis

• I have a problem with the command window terminal

  I'm doing a bootable disc. I glue in the sudo command and can't go any further. When I am invited to my password it's like my keyboard is disconnected. Comparing what I feel for YouTube videos, I noticed that I see things a little differently and maybe that's the key and I'm open to suggestions. That's what I see after the command and click on back:

  Last login: Thursday, August 11 at 17:20:16 on ttys000

  : ~ * sudo/Applications/Install\ OS\ X\ El\ Capitan.app/Contents/Resources/createinstallmedia--volume/Volumes/ElCapInstaller--applicationpath Applications / Install\ OS\ El\ Capitan .app X\ - nointeraction

  CAUTION: Improper use of the sudo command could lead to data loss

  or the deletion of important system files. Recheck your

  If you type when you use sudo. Type "man sudo" for more information.

  To continue, enter your password, or type Ctrl-C to abort.

  Password:

  After the password: is a small logo, a rectangle with a key in it. At this point, I am unable to type anything, the back button still works, but I'm unable to type anything later. What I'm doing wrong or not understanding? I'm new on this.

  Password entry is not included. It seems that nothing is entered, but everything you type is received. Type your password, and then press return. You will then receive a short prompt asking you to enter 'y' or 'n'. The first will take action. The abandonment of the latter.

• Problem with the command net user. Please help ASAP!

  What is happening on Windows XPI logged on as administrator on my computer, then in the command prompt, I typed: net user administrator active: / Yes (and pressed enter). After that I restarted the computer, I can not connect, and was my password (password). Please help me as soon as POSSIBLE. Thank you!

  Your syntax is incorrect for the command "net user".  You probably wanted to enter the command:

  NET user administrator / Active: Yes

  The syntax of the command 'net user' (according to this article) is:
      net user [Username [password |]] *] [options]] [/domain/domain]

  All options begin with a forward slash character (/)

  By omitting the character "/" before "active:", you have probably changed the password of user 'Administrator' in "active:" or "active: / Yes" depending on whether you entered a space before the 'yes '.  Try to connect as an administrator when you enter that as your administrator password.

  HTH,
  JW

• problem with the command stop and buttons

  Hello world.

  Here's my scenario

  I have a project where I have 5 buttons (all on separate layers) I want to put a link to the image 2, image 3, image 4, part 5 and part 6.

  Thus, for example, I want my topic is to link to the Framework 2 and last new button, to link to the image 3

  The separate pages are housed on the layer 'layer of page '.

  Please see the image below to see what I mean

  

  I'm using the code snippets in cs5 to do this, so I am using the command "click go to frame and play" and change the number of the framework accordingly.

  My problem is when I use the command to stop on the first frame. If I do not use the command the swf allows to select the 6 images constantly, but when I use the command stop buttons do not work because the application has stopped.

  Anyone could shed some light on this problem?

  It may be a case for the use of your gotoAndPlay() where you need gotoAndStop().  If you are on the frame you say to go to play, he can't go anywhere to get there, and stop it is already sold out, so it will play thru to the next stop.

• Problem with the command "save target as".

  When I use the ' save target as ' congratulate some sort box 'Close this dialog box when download is finished' got checked. The box disappears before I can disable the checkbox. How can I disable the checkbox?

  JustZoe,

  Welcome to the Microsoft Answers community. I found an article that can help you here:

  Uncheck close this dialog

  In addition, another option would be to do a System Restore to a point before that you made this change.

  I hope this helps.

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Problem with the DataExport command

  Hello Experts,
  
  Problem with the DataExport command in a calcscript (one's TIME and another is in the output file), tried using different option
  DataExportColHeader time; and
  DataExportOverwriteFile POWER
  
  (1) the second line in the output displays the month 'SEP', rather like a column. Here's the code used.
  
  (2) for the forecast, you would have several sections as example below
  (FcstMo (MS), FcstYr (2009) and AllMonths (JAN-dec), FcstYears (2010,2011,2012)).
  How to add in the same file can HOWEVER add us to the same file with multiple queries using DataExport patch, could not find option in the documentation.
  
  Code
  ------
  SET DATAEXPORTOPTIONS
  {
  WE DataExportDIMHeader;
  WE DataExportOverwriteFile;
  DataExportDecimal 8;
  };
  
  DIFFICULTY (@REMOVE (@RELATIVE("DepartmentID",0), "OR00777"), @RELATIVE ("goods and Services", 0 "),"AC8002602", CActVer, CurYr, 'EOP' & CurMo, @RELATIVE ("industry", 0))
  DATAEXPORT 'File' "" "/ opt/tools/arbor/hyperion/AnalyticServices/app/ExportfromMV7.txt";
  ENDFIX;
  
  
  
  Output file format
  ----------------------
  'Years' 'Versions' 'measures' 'Goods and Services' "DepartmentID" "Business line" 'BalType', 'Time '.
  "MS."
  '2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR00775' 'EOP' 100.00000000
  '2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR00776' 'EOP' 1000.00000000
  '2009' 'ADMIRE' 'AC8002602' 'AC0000157' 'DI17801' 'OR81305' 'EOP' 2000.00000000
  '2009' 'ADMIRE' 'AC8002602' 'AC0001904' 'DI17801' 'OR00775' 'EOP' 300.00000000
  
  
  Any help would be a great help.
  
  
  Thank you
  Jingle

  What is specified as you column size (should be a dense dimension) will appear in the second row. It shows you what each column of data. Even if you load not relational, you can specify the relational format. There is an interesting bug that has been fixed in 11.1.1.3 If the columns do not data, they have removed from the relational attraction, you can read more about this in my blog http://glennschwartzbergs-essbase-blog.blogspot.com/

• Problem with the format of the values in the command prompt (when you use multiple values)

  Hi all
  
  I have problem with the format of the values in the command prompt when you use multiple values.
  
  Value is year (2009) and when I use it in the drop-down list that is formatted, all right, as 2009, but when I use several values I get number as 2009,00. I put in year column format number with 0 decimal places and save by default in the year column. Year is formatted well anywhere in the query, such as 2009. Why is - what happens at the command prompt when you choose multiple values in prompt dashboard?
  
  Thank you

  I think the YEAR Data Type could be defined DOUBLE RPD.

  Use the CAST function in the formula (fx) and the output from test.

  CAST (INT YEAR)

  Hope, it will help you.

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• Problem with the so-called calendar LOV...

  Hi all
  
  I have a problem with the calendar LOV. Normally, since there suppose to act like a LOV must not cause any trouble during his appeal on a required field (or pass through his WHEN_VALIDATE_ITEM trigger). Still its giving me an error message saying that the field must be entered. I want to be able to call the calendar when you perform an insert (so the field is empty) and put the date selected in the field.
  
  I also want to do it by using a button (next to the date field) to show the calendar. Now I used the DO_KEY ('LIST_VALUES') command to call the Key_listval trigger (as shown in the demo), but it seems like its works really well. Any ideas on this subject would be apreciated.
  
  I use Oracle Froms 10 g and I followed the instructions in the PACK of DEMOS for the FORMS 10 g (on this site) to build the calendar.
  
  Thanks in advance!

  If you are talking about the "so-called" Lov calendar implemented using forms-objects (blocks, etc.), you will have the problem with the elements required for the calendar will assign a GO_BLOCK that causes validation to occur, which will fail on the need for article.

  Solution?

  If you're on 10G, theres also an example with a java bean.
  If the 6i, you could create a standalone implementation of the Agenda-lov-features and make a call_form instead of a GO_BLOCK.

• Problems with the Smart keyboard (iPad 9.7 Pro)

  I recently bought the iPad Pro 9.7 inches, gray space, Wifi, 128 GB. IOS 9.3.1 of the operating system.

  A few questions that I met in my four days of using the iPad with the Smart keyboard:

  NOTE: the following problems persist despite a technical support call which lasted, I did 2 hours and 30 minutes. I had to restore my iPad settings by connecting to iTunes via my PC to reinstall the last iOS.

  (i) switching applications: if I want to pass, say, from safari to adobe, it is quite easy to do with the keyboard. However, there is an intermittent problem when the apps. When I try to open Adobe when I use safari, the screen of the iPad shows apps that are open as soon as I press the command and tab key.

  What is supposed to happen - I choose to open Adobe, Adobe opens.

  What happens to the contrary - Adobe does not open. Another "X" application that is currently running, opens. It is quite frustrating, because there is no pattern to this. If I use once more the keyboard shortcut to open Adobe, another application 'Y' which is running, open it now.

  In this case, I pointed out, often when the App Store is running.

  (II) command key: sometimes, shortly after I use the shortcut keys to turn on screen shortcut area (pop-up shortcut) - apps, this is supposed to happen if and only if you press and hold down the command key.

  This often happens when I switch to Safari.

  (III) keyboard not responding: a problem that I met today for the first time. My keyboard will not just respond. I had to disconnect and reconnect the keyboard for this function.

  (IV) on which the space key: to wake up the iPad, pressing the SPACEBAR is enough. You don't have to press the home button. Yet, sometimes the space key does not respond and you must use the home button.

  v) Quick app - keyboard shortcut crash switch function causes: if I want to switch from app to app 'X' 'Y', but mistakenly switch to 'Z' app, I immediately want to spend to 'Y '. However, I can't do this in quick succession. I have to wait a second or two before I can switch from 'Y' 'Z' app, otherwise the automatic switching app crashes and you have to wait once more for a second or two before moving on.

  My diagnosis:

  (I) it could be a problem with the smart connector on my iPad. A hardware problem. But it does not explain why the automatic switching app appears and passes correctly but eventually open the wrong applications. Also, it does not explain why the problem is intermittent.

  (II) a software problem. However, that would make me a face 5 questions at once. Sort of. I was surprised that, apart from the question of #3 and #4, there was almost no mention of other issues.

  To restart the iPad or to disconnect and reconnect the keyboard. But I don't think that anyone would be willing to do this 4 - 5 times on a daily basis.

  Update:

  So I used my keyboard all day yesterday without opening the App Store. And guess what? It has been working perfectly. All the above problems I mentioned were not available yesterday. I'll use the App Store today and let it run in the background to see how does my iPad.