Problem with the command line APEXEXPORT after upgrading to 3.2

Similar Questions

• problems with the command-line command pc

  on the side of mac, I work from command line. But on the pc side I can't understand this.

  on a mac, this is

  deleteF="rm -r "+myNumPhoto.slice(0,39)+"imaging/*";
        app.system(deleteF);
  

  on the PC I'm trying to do the same thing with this.

  deleteF = "RD/s \\TEST\test".

  It runs the command, but I get the system cannot very well the specified file.

  If I run the slashes on the other hand, it works not at all of the suggestions would be greatly appreciated.

  much of the problem was with all the obliques. They must return the characters. That said I ended up doing a string. Here's what I used.

      myNumPhoto=app.document.presentationPath;
      s=myNumPhoto.slice(0,42)
      s.toString();
      s=s+"imaging";
        deleteF="RD /S /Q "+s;
        addF="MD "+s;
        app.system(deleteF);
        app.system(addF);
  

  I had to delete the folder, and then add it in back on the PC because the command RD except no wildcard characters.

• Problem with Xcode command-line tool

  Hello

  Last week I upgraded my macbook pro with the latest OS X Capitan and 7.3 of Xcode.

  I also installed the command line for Xcode Tools.

  But there is a problem because the "command-line tools" in Xcode do not work, for example, I am getting following error:

  MyMacBookPro-5: ~ make amitc$ xcrun

  xcodebuild: error: SDK '/Applications/Xcode.app/Contents/Developer/Platforms/MacOSX.platform/Developer /SDKs/MacOSX10.10.sdk' is not found.

  xcrun: error: cannot find the utility 'make', not a tool of development or on the WAY.

  Does anyone know any solution to this problem?

  (I don't understand why he's trying of MacOSX10.10.sdk, while it must search for MacOSX10.11.sdk).

  With our thanks,

  Amit.

  You agree with the terms and conditions of the license?

  sudo xcodebuild-license

• How to remove a shortcut with the command line?

  How to remove a shortcut with the command line?

  How to make a backup of the local users and groups with command line?

  You delete a shortcut, just as you would remove any other file.  A shortcut will end with the extension ".lnk".  So assuming you are trying to remove the shortcut named "Shortcut.lnk" which appears to the user 'Bob's Office, you use the button Delete (del) or 'clear' command by specifying the full path to the file.  (Remember to put filename in quotes if there is a space anywhere in the path or name) as in:

  del "C:\documents and settings\Bob\Desktop\Shortcut.lnk".

  What kind of a backup 'users and groups' you want to do?  If there is a backup of the users and groups as written in the registry, a good registry as C:\WINDOWS\ERUNT backup program that will make the command line.  If you are trying to backup all users and their data as well, then you are better off with a backup program.

  HTH,
  JW

• Deployment of final application with the command line Question

  OK so I have my finished application.

  on a folder in my office called "CODBOUG".

  So I tried different methods to run the application and complete the test on the Simulator with the command line. But it's just too much. So I need your help community!

  I tried:

  BlackBerry-deploy-installApp-package CallofDutyBlackOpsUltimateG
  

  uide.bar - device 192.168.18.128

  I'm a little lost with the help of the command line, if someone could guide me on the right lane.

  I'm on windows, btw.

  Thank you.

  When you run a command, Windows will search in a series of directories for this program to run. The list of directories is stored in what is called an environment variable. You must add the path to the bin of the sdk at this variable directory (e.g. C:\Program Files (x 86) \Adobe\Adobe Flash Builder Burrito\sdks\blackberry-tablet-sdk-0.9.3\bin).

  You can access the path variable by right-clicking on my computer > properties. Select the Advanced tab and click on approx. Variables.

  Under System Variables, search PATH and edit it. Add the path to the sdk bin directory (make sure that there is a semicolon, that separates the directories).

  Open a command line window in the directory where your .bar file. When you run the command, Windows will look for blackberry - deploy and can be found in the directory that you have added to your PATH variable so to run it.

• I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Please, he

  I opened my photos of my SDCard with File Explorer, select them all, then I select move to fill after that I saw the bar of loading with the green line. After that all my photos from my computer disappered and were removed from my SD card. Help, please

  I looked everywere in my computer, but they are not found

  I bet that you have selected the folder Adobe Bridge CC or CS6, and it would be in there under Program Files/Adobe/or Program Files (x 86) / Adobe /.

  Move to... in the file Explorer apply only to records not the bridge program.

  You open Bridge and Photo Downloader allows you to move pictures from your SD card in the deck (also called import)

  Gene

• Problem with the redirection email Yahoo after installation of nine updates

  Original title: problem with transfer of emails after having installed new updates

  I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account. When I get the Outbox until you find at least half of the time the "add recipients" does not work despite all the efforts, which means that I would put in manually email addresses (long and painful). My windows mail forwarding system seems to work OK. -Wood Marcus * address email is removed from the privacy *

  Hello

  1. What were the updates that have been installed on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  2. don't you configure e-mail account Yahoo BT in any e-mail client? Example: Outlook, Windows Mail.

  3. you use Internet Explorer to access BT Yahoo mail account?

  If you have configured the account BT Yahoo mail on the mail client, post of additional information to help you more away or well you could contact Yahoo Mail Support forums to help you best. Check out the following link.

  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• Create shortcuts with the command line switches

  I have three versions of Word on my computer. (I know, I'm a masochist).

  There are times when I want to run one of them in safe mode. Those who get me if I run winword.exe /a in the run window let you guess.

  I know I can get it by including all the way, but it's a pain.

  I would like to make a few shortcuts in Windows that would do this for me. However, I don't know how to add the command line switches. I used to be able to properties (similar to editing a .pif file) but it doesn't seem to be an option.

  You * need to locate executable files and create each shortcut via right click on the executable file.  Shortcuts Microsoft Office may not be "real" classical shortcuts

  Right click and change the shortcut.  In the 'Target' box, add at the end command line switch.

  For example... I found the 64-bit Microsoft Office 2010 Word executable here:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  and created a shortcut on my desktop.  The "target", said:
  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» EXE ".

  I added the / a that you pointed at the end, the target is now:

  «"C:\Program Files\Microsoft Office\Office14\WINWORD."» "EXE" /a

  In fact - the after typing all that above, I realized that there is a Microsoft Knowledgebase Article... Google worked and I do not use it.  Heh

  How to use the line switches of start command to start Word 2010, Word 2007, Word 2003, Word 2002, and Word 2000 (Method 2).

• with the command line remote reboot

  I know not how to remote shutdown of a pc on our network using the command-line using this...

  Shutdown - r f t 0 - m ComputerName

  But how to do it with my mac to pc?

  Again, you can not. The commands only work with the same OS.

  Yes Mac to Mac, Windows, Windows, etc.

  You will need to find some kind of package of administration remote cross-platform.

• VMWare Player startup with the command line command does not work!

  Hello everyone,

  I'm new to the community and it will probably show. So, I say sorry in advance for the flaws, I'll do. Since I am of German native language I need to translate it into English. So, I could use special terms wrong, but I'll certainly try to avoid this. Just keep in mind. And now my question:

  I was running VMware Player 3.0 with VMware Tools installed and VMware VIX 1.8.0 installed on a host of Win7 Ultimate 64-bit. The Useraccount on the host has administrator rights. Guest operating system is WinXP SP3. Since I need two softwares of different recording/Dictation on my workstation and I could only one of them simultaneously open (which is very uncomfortable, when you need to change frequently), because those two were always challenging who got to use the microphone, I installed a second microphone (that only the application for the two contest) and then created a virtual machine to run the software second with one of the two microphones connected only to the prompt. (Directly/comfortably) to start the second software I created a. LNK shortcut file (and attached to the startmenu) who run the command

  Departure of player "C:\Program Files (x 86) \VMware\VMware" t "C:\Users\USERPROFILE\Eigene virtual Computer\Recorder Windows XP Pro Windows XP Pro SP3.vmx VM SP3\Recorder VM.

  with the recorder VM "VM Windows XP Pro SP3" opening the second software automatically (autostart).

  This worked well, until I updated my VMware Player to 3.0.1. Since the update however, my shortcut file simply is unable to start the virtual machine. However, starting the virtual machine of VMWare Player normal window still works. By running the command mentioned above constitute the command line prompt, I got the information, this vmrun.exe could not connect to the host, due to an error, the specified version is not found, which probably means that the VMware Player.

  P:\ & gt; "" Player t C:\Program Files (x 86) \VMware\VMware VIX\vmrun.exe "start"C:\Use ".

  virtual rs\USERPROFILE\Eigene Computer\Recorder VM Windows XP Pro SP3\Record

  ER VM Windows XP Pro SP3.vmx"

  Unable to connect to the host.

  Error: The specified version is not found

  P:\ & gt;

  I tried the VMware VIX update (from 1.8.0 to 1.8.1) without success. The errormessage even remains.

  The three relevant paths for VMware Player, VMware Vix and the VM are spezified in the systemvariable path as follows:

  % SystemRoot%\system32;%SystemRoot%;%SystemRoot%\System32\Wbem;%SYSTEMROOT%\System32\WindowsPowerShell\v1.0\; "" C:\Program Files (x 86) \VMware\VMware VIX ". "" C:\Program Files (x 86) \VMware\VMware Player. " "' Virtual C:\Users\USERPROFILE\Eigene computer; C:\Program Files (x 86) \QuickTime\QTSystem\

  Today suddenly wrong?

  Any help would be greatly appreciated.

  Thanks in advance to one that solves the Enigma.

  Hello

  Meine VMs starte ICH mit dem VMplayer so:

  vmplayer.exe _

  VMX-settings- WS FAQ -[MOAcd | http://sanbarrow.com/moa241.html]- VMDK-manual

• remove the material with the command line

  I have a virtual machine that is powered on and in a cluster and I need to migrade. the vehicle currently has a cdrom installed but I can not change it (the cdrom is grayed out) is there a way to remove these devices from the virtual machine in VC with a command line so I can migrate? (it's really just the cdrom which is holding it up. Oh and the kicker is I can't restart the VM,...

  Hello

  I have no version of ESX 3.0 coming down more, but you can try to do it by using vimsh as follows:

  Connect to the Console on your ESX host and enter as root:

  vimsh
  

  Now to get the ID of your virtual machine in question for help (scroll through using shift page up / page down if you must)

  vmsvc/getallvms
  

  Note the ID of virtual machine, for example, it can be a number like 4400

  Find the key to your VirtualCDrom by querying the hardware devices to your virtual machine.

  vmsvc/device.getdevices 4400
  

  Scroll to the top again and note the key, in my case, it's 3000

  Now, disconnect the CD-ROM device by running:

  vmsvc/device.connection 4400 3000 false
  

  Use true if you want to connect the device.

  Just tested on VMware ESX3.5 and it worked very well there.

  --

  Wil

  _____________________________________________________

  Visit the new VMware developers at http://www.vi-toolkit.com wiki

• problem with the connectivity of customers after mixing several models with WLC 5508 Setup WLAN ap

  Hello

  I have 2 5508 wlc and AP 1130 and 1200 in my test harness.

  Currently, WLAN set is in place and works very well but the customer become a frequent problem with the power of the weak signal same AP is installed very near the place of the customer.

  I have my doubts, if I have a question because I use several models of AP in my set-up?

  How to rectify the same question?

  Some time customer gets limited connectivity, means that they usually get IP also.

  What are all the parameters to check in WLC?

  (1) very difficult for a person on a forum to respond. Check if your AAA server was indeed seen as inactive at the same time for other devices.

  If this is not the case, check the network connectivity between the 2. Maybe packets are lost between wlc and aaa server...

  (2) as I mentioned, it may have nothing to do with clent near or far from the AP. What happens if your DHCP server is not responding to the client? What happens if the dhcp request never reaches the level of the DHCP server for some reason any?

  You must investigate all along path to find out why the customer is not getting an ip address.

  Troubleshooting involves trace of sniffer, debug, client, etc...

• Problems with the new XPS 8700 and upgrades...

  Hello

  I need help!

  I just bought an XPS 8700 a week ago (maybe more).

  It came with: pre installed with Windows 7 Pro, installation / upgrade disc for Windows 8 Pro

  (Pentium 4790 16 GB RAM 4 GB Nvidia GTS 745 VC)

  A few days after I ordered an ssd of m Cruscial 480 GB for her, with a WD 1 TB HARD drive.

  My problem is centered around the M SSD.

  The Crucial SSD of M IS compatible with this system?

  I try to set it up and the system hangs.

  I can't use ready boost, or it will be BSOD.

  I want to load the OS on the SSD m and use the other 2 HDD as data drives.

  JD

  JDclsuter13x

  My other question is: System running Windows 7, but comes with a Win 8 restore disc?

  Its rights to licensed Windows Pro 8.1 with downgrade to Windows 7 Professional. You will need make the recovery using Dell backup media and restore your original disc. Theres no need to change the BIOS settings earlier.

  After that, remove your hard drive and insert your mSATA SSD. Use the Dell backup and recovery USB to reinstall Windows on the mSATA SSD. Once you are satisfied with the installation of Windows on the drive mSATA remove it and insert the HARD drive, use DISKPART OWN while using your DVD of Windows 8.1. Then insert the mSATA SSD, Windows 7 starter and initialize the HARD disk, implemented as a data reader.

• Problem with the commands pack/unpack

  Hi friends, I have a problem.
  
  I have 2 boxes of physical, 192.101.1.104 (1) 192.101.1.102 (2).
  
  (1) I have installed weblogic 10.3 on the first box and created a domain it and server administrator.
  (2) I opened the admin console and created 2 managed servers (i) (ii) MS1, MS2 that both are created under "192.101.1.104". I created a machine (Machine A) and awarded the two servers so that 'Machine - A'. I started Node manager in "192.101.1.104" and I am able to see its available.
  (3) now, I installed weblogic server (Server bare no field) in "192.101.1.102" and I installed as shown below
  
  Will be installed the JDK and the following products:
  
  
  WebLogic Platform 10.3.4.0
  * | ___WebLogic server *.
  * | | ___Core application Server *.
  * | | ___Configuration assistant and modernize the framework *.
  * | | ___Web 2.0 Server HTTP Pub - Sub *.
  * | | ___WebLogic SCA *.
  * | | ___WebLogic JDBC Drivers *.
  * | | ___Third party JDBC Drivers *.
  * | | ___WebLogic Server customers *.
  * | | ___WebLogic web Server Plugins *.
  * | | ___UDDI and Xquery Support *.
  * | * ___JDKs
  * | ___SUN SDK 1.6.0_21 *.
  
  Scheduled installation size: 914,1 MB
  
  
  Because I want to use "192.101.1.102" for just for managed servers.
  
  (4) now, I used the pack command in my "192.101.1.104" box to pack the field so that I could use this field packed in "192.101.1.102" box.
  
  It's the syntax I used for my order of pack in '192.101.1.104 '.
  */Home/staging/Oracle/middleware/wlserver_10.3/common/bin/Pack.sh-Gere = true - domain = "/ home/development stage/Oracle/Middleware/user_projects/domains/myDomain»-template="/home/staging/bea/user_templates/myDomain.jar "-template_name = ' My Weblogic Domain»-log=/home/staging/bea/wlscldompack.log-log_priority = INFO."
  
  She has created myDomain.jar file in ' / home/scene/bea/user_templates implementation.
  
  (5) I used the 'scp' command to transfer this file from '192.101.1.104' to '192.101.1.104 '. while I can unpack the jar file there.
  
  He transferred perfectly with defects.
  
  As I said in my "192.101.1.102" machine is seen naked weblogic server and no field
  
  under this directory (the two machines with the same directory structure)
  
  "/ home/Oracle/stage/Middleware implementation.
  
  the directory structure is (below the directory before unpacking structure)
  
  drwxrwxrwx 8 4096 27 Mar 16:23 jdk160_21 d87231 d87231
  drwxrwxrwx 2 d87231 d87231 4096 Mar 27 17:21 connects
  drwxrwxrwx 7 d87231 d87231 36864 Mar 27 16:23 modules
  d87231 d87231 - rwxrwxrwx 1 622 27 Mar 16:23 ocm.rsp
  -rwxrwxrwx 1 d87231 d87231 73531 Mar 27 16:23 registry.dat
  -rwxrwxrwx 1 d87231 d87231 2024 Mar 27 16:23 registry.xml
  drwxrwxrwx 8 d87231 4096 27 Mar 16:23 utils d87231
  drwxrwxrwx 9 4096 27 Mar 16:23 wlserver_10.3 d87231 d87231
  
  (6) now used the command to unzip below.
  
  /Home/staging/Oracle/middleware/wlserver_10.3/common/bin/unpack.sh-template=/home/staging/mydomain.jar-domain = / home/getting Scene/oracle/middleware/user_projects/domains/mydomain-log=wlscldomunpack.log-log_priority = INFO
  
  Its unpacked with out any problem.
  
  I went to the newly created directory structure
  
  which is under ' / home/Oracle/stage/Middleware implementation.
  
  d87231 d87231 - rwxrwxrwx 1 282 Mar 27 17:29 field - registry.xml
  drwxrwxrwx 8 4096 27 Mar 16:23 jdk160_21 d87231 d87231
  drwxrwxrwx 2 d87231 d87231 4096 Mar 27 17:21 connects
  drwxrwxrwx 7 d87231 d87231 36864 Mar 27 16:23 modules
  d87231 d87231 - rwxrwxrwx 1 622 27 Mar 16:23 ocm.rsp
  -rwxrwxrwx 1 d87231 d87231 73531 Mar 27 16:23 registry.dat
  -rwxrwxrwx 1 d87231 d87231 2024 Mar 27 16:23 registry.xml
  drwxr-x - 3 d87231 d87231 4096 Mar 27 17:29 user_projects
  drwxrwxrwx 8 d87231 4096 27 Mar 16:23 utils d87231
  drwxrwxrwx 9 4096 27 Mar 16:23 wlserver_10.3 d87231 d87231
  
  
  
  I see under
  
  
  * "/ home/development stage/Oracle/Middleware/user_projects/domains/mydomain/servers ' * '"
  
  
  
  *[d87231@localhost servers] $ pwd *.
  * / Home/development stage/Oracle/Middleware/user_projects/domains/mydomain/servers *.
  *[d87231@localhost servers] $*.
  *[d87231@localhost servers] $ ls - l *.
  Total 8
  drwxr-x - 3 d87231 d87231 4096 Mar 27 17:29 AdminServer
  *[d87231@localhost servers] $*.
  
  
  It is not created all the managed servers, even if I used
  '- handled = true' in my pack order.
  
  can any body if you please help me what was wrong with my work above.
  
  Another question, like when I'm unpacking in '192.101.1.102', it should ask me the new managed server names isn't?... why he asked me. I'm not sure my question is correct or not.
  
  My doubt is if the first box is to have 2 managed servers with names MS1 and MS2 and port 7003, 7005, managed server names should change in '192.101.1.102' box, correct me if I'm wrong. Ports are not required to change since the IP address is different.
  
  
  The 192.101.1.104 under mydomain/servers directory structure is
  
  * / Home/development stage/Oracle/Middleware/user_projects/domains/mydomain/servers *.
  *[d87231@localhost servers] $ ls - l *.
  
  drwxrwxrwx 7 d87231 d87231 4096 Mar 21 23:42 AdminServer
  d87231 d87231 drwxr - 3 4096 Mar 26 15:19 domain_bak
  drwxrwxrwx 7 d87231 d87231 4096 26 Mar 15:08 MS1
  drwxrwxrwx 7 d87231 d87231 4096 Mar 26 15:19 MS2
  
  The file config.xml in 192.101.104 is to be entered for these servers managed as well.
  
  This (192.101.1.104) physical server is to have 2 managed servers as I explained at the beginning, I ran the command of pack for this area. But the packaged jar file is not managed servers.
  Please see the light on this and please help me what mistake I make here.
  
  
  Thank you very much
  Peter

  I just tried the below scenario my test environment.

  *./Pack.sh-Gere = true - domain = / home/bonbons/myDrive/weblogic/user_projects/domains/portail-banc-template=/home/candy/myDrive/weblogic/wlserver_10.3/common/templates/domains/myportal.jar-template_name = "myportal" - log = myportal.log *.

  Portal-bench area contain - ms1, ms2 managed instance. This command will create a managed server template.

  Another box running the unpack command and created the new domain such as portalbench or same (managed server model) domain name.

  unzipped the domain correctly created.

  OUTPUT
  =====
  *./Unpack.sh-domain = / home/bonbons/myDrive/weblogic/user_projects/domains/portalbench-template=/home/candy/myDrive/weblogic/wlserver_10.3/common/templates/domains/myportal.jar*
  < read="" template="" from="">

  succeed: model read from ' / home/candy/myDrive/weblogic/wlserver_10.3/common/templates/domains/myportal.jar '.

  < set="" config="" option="" domainname="" to="">

  If you look at the file config.xml and ms1, ms2 directory will be unavailable after bring the managed server model, the config.xml and ms1, ms2 directory will be available.

  I enclose my domain server managed after decompression structure.

  .
  | - bin
  | | - nodemanager
  | | ' - wlscontrol.sh
  | | - server_migration
  | | ' - wlsifconfig.sh
  | | - service_migration
  | | ' - readme.txt
  | | - setDomainEnv.sh
  | | - startManagedWebLogic.sh
  | | - startWebLogic.sh
  | | - stopManagedWebLogic.sh
  | ' - stopWebLogic.sh
  | - config
  | | - config_bootstrap.xml
  | | - configCache
  || | - crc.ser
  | | ' - ver.ser
  | | - config.lok
  | | - deployments
  | | ' - readme.txt
  | | - diagnostics
  | | ' - readme.txt
  | | - jdbc
  | | ' - readme.txt
  | | - jms
  | | ' - readme.txt
  | | - nodemanager
  | | ' - nm_password.properties
  | | - Security
  | | ' - readme.txt
  | ' - start
  | ' - readme.txt
  | - fileRealm.properties
  | - init-info
  | | - area - info.xml
  | | - oraclehomesubs.xml
  | | - security.xml
  | | - startscript - unsub.xml
  | | - startscript.xml
  | ' - tokenValue.properties
  | - lib
  | | - hsql.jar
  | | - Portal - service.jar
  | | - portlet.jar
  | ' - readme.txt
  | - Security
  | | - DefaultAuthenticatorInit.ldift
  | | - DefaultRoleMapperInit.ldift
  | | - SerializedSystemIni.dat
  | ' - XACMLRoleMapperInit.ldift
  | - servers
  | ' - AdminServer
  | ' - security
  | ' - boot.properties
  | - startManagedWebLogic_readme.txt
  ' - startWebLogic.sh

  19 directories, 37 files

  Its works for me.

  Thank you
  Reverchon

• Problem with the pen, lines and smoothing tool tool

  I draw the line 1.

  

  Then I pause (click the arrow and then click on the new tool pen) and draw of the line 2

  

  When I finished there is a surprising gap in line 1 after the intersection of line 2:

  

  Then when I use the resulting mixture too the abstract looks at-non-contigue with dashed lines:

  

  instead of something of a continuous and uninterrupted wave lines like:

  

  For me, the problem is clearly the gap appear but I do not understand why it appeared, when as shown in image 2, I clearly I paint complete lines.

  Please check if the lines (at least one of them) with a filling.