Blinking cursor and black flashing behind the game icons

Similar Questions

• Fable III has a black screen when the game restarts in the locker room.

  I loaded Fable III, but the locker room screen was black. I went to Nvidia and downloaded the latest driver for the Ge Force 7800 GTX. I have Windows 7 with an Intel dual core & 4 GB Ram. I rebooted Fable III but I still have a black screen when the game restarts in the locker room. The internet shows that my CPU will launch the game. How can I solve this problem of black screen?
  Thank you

  Original title: Fable III problem

  Hello

  Fable III is a graphically demanding game designed for next generation equipment. Your computer must have both a powerful CPU (processor) and a graphic chipset (video card). The video card must also be using the latest video card drivers for the highest level of performance and compatibility between your hardware and Fable III.

  The issue is limited to Fable III for PC? Are you facing other than display issues when reading Fable III for PC?

  You can view the following link to learn more about this:

  Fable III for PC: video and required system configuration problems

  http://support.Microsoft.com/kb/2547300

  I hope that helps!

  If you need help on this problem or any question of windows in the future let us know.

• I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game

  I was charged for my coffee game update, which I wasn't aware of. I do not accept to pay about $ 8 for only an update, this game in the first place was free. I want to ask for a return and I will delete the game

  Apple or App developers read this forum. If you want a refund, contact the developer to the email address. It is to them that they will refund your or not.

• Poker: need to know about the subject and how to play the game

  need to know the subject and how to play the game

  Hi young,
   
  Thank you for visiting the website of Microsoft Windows Vista Community.
   
  I noted that you want to know how to play the game of Poker in vista.
   
  What is Hold em Poker: The Hold em Poker game is a Windows Ultimate Extra that is available for users of Windows Vista Ultimate Edition. You can download the Hold 'em game from the Microsoft Windows Update Web site.

  Hold em Poker is a poker game on computer in which you compete against the computer. The hold 'em game uses the technology Microsoft DirectX to deliver smooth, animated play and rich graphics. You can configure the Hold em option set to perform the following operations:
  Play against up to five computer players
  Set the skill level of opponents
  Customize the appearance of the game cards and game table
   
  For more, see: http://support.Microsoft.com/default.aspx/KB/932925
   
  How to play: When you open the Poker game window, press F1 and it will open the Help window. The help section you have all instructions and details on how you can play the game.
   
  You can visit the link http://forums.gamesforwindows.com/ to find other members of the community have to say. You can search the Internet for more links learn more about the game of poker.

  Kind regards
   
  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Visible, thin and black lines around the layer mask.

  Hello, in a current project I'm finish, there visible, thin and black lines around the perimeter of each layer. These layers have layer masks. I tried to merge the layers (shift, ctrl, alt + E) and flattening, but the lines are still visible. Help, please!

  Thanks in advance!

  Photoshop CC

  Windows 8.1

  3.7 ghz I7

  64 GB of ram

  1 gb player/os ssd

  16 TB Raid 3 array work / scratch

  You must read and watch tutorials masking. Look at sites like Russell Browns to topics such as advanced masking and extraction and practice. Sometimes its inpossible create a very good mask in these cases, you need to fix it

  

  

  full size link http://www.mouseprints.net/old/dpr/TryHard.jpguse open the link in a new window or tab.

• Computer starts up, it stops at a black screen with the mouse icon (which moves around as usual)

  When I start my laptop, it goes through all the loading screens (Windows Vista etc.) then sticks to a black screen with the mouse icon... I somehow managed to try a restore of the system by a few points, but they all failed a moment I can't even find this option.

  Hi Peter,

  1. have you done any recent hardware or software changes to the computer before the show?

  2. with what code error did system restore fail?

  Method 1:

  Try to start the computer in safe mode and check if the problem persists,

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2:

  Try and perform a startup repair and check if that helps you.

  Startup Repair: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

• Unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon.

  Original title: I tried to apply the photo viewer to open a file and the photo viewer icon replaced each icon on my desktop. Now I can't open anything on my desktop. What is going on?

  The name is below the icon, but the correct icon has been replaced by windows Photo Viewer icon. When I click to open it, it says: windows Photo Viewer cannot open this photo because Photo Viewer does not support this file format, or you do not have the latest updates... I don't know what I did!

  Hi,

   

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to access the photo viewer; and also cannot access the desktop icons because they are changed to the photo viewer icon. Please let me know if you do not experience this problem.

  I understand the inconvenience caused to you. I'll help you solve the problem!

   

  Before troubleshooting, I have little information on the issue.

  1. did you of recent changes to the computer before this problem?

  Try the methods suggested in the article below and check after each method:

  Method 1: Icons change incorrectly in Windows: http://support.microsoft.com/kb/2396571

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the in the Microsoft Knowledge Base: 322756. How to back up and restore the registry in Windows: http://windows.microsoft.com/en-us/windows-vista/Back-up-the-registry

   

  Method 2: Run scan files system (CFS) auditor, to repair missing or corrupted system files.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7: http://support.microsoft.com/kb/929833

  If the problem persists, post your reply with the results and the questions asked above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• OSX Leopard Flash 9: Black blocks behind the letters in a Flash content?

  I just finished installing Leopard on my 15 "MacBook Pro and was pleasantly surprised to see that it came with Flash 9 installed. Unfortunately, the app Scrabulous has black blocks made behind the almost black text now and I can not understand how to fix it.
  
  Here is a link to a picture of what it looks like: Black blocks of text
  
  What I tried:
  
  -Install the Adobe site flash player (same version, but smaller than the one that comes with Leopard.1 MB)
  -display in FireFox 2.0.0.8
  -display of another account on this computer
  -Reinstall Leopard
  
  None of these things seems to solve this problem. Someone else had the same problem? Anyone know of a solution / workaround?
  

  Hi rhithyn,

  Have you tested with the beta:

  http://labs.Adobe.com/technologies/FlashPlayer9/

  If you still see the black boxes with this version, I want to open a deal for you. Send me a message private with your name, first name and contact information.

• Why, since the last adobe Flash update, the games keep freezing and saying to send a report to adobe Flash? It's not nice

  play games like farmville, hidden Chronicles and other zynga games has become a nightmare since the last update of adobe Flash, I must have sent hundreds of incident reports to them with nothing happens, help!

  Try to uninstall and reinstall Flash Player.

  Uninstall Flash Player, and then click on Adobe web site http://get.adobe.com/flashplayer/
  Download and install.

  Uninstall Flash Player
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  How to uninstall Adobe Flash Player on Windows & Mac
  http://www.Blogsdna.com/4329/how-to-uninstall-Adobe-Flash-Player-on-Windows-Mac.htm

  ====================== Install ================================

  Download Flash Player
  http://get.Adobe.com/flashplayer/

  Flash Player installation instructions
  http://www.Adobe.com/products/flashplayer/productinfo/instructions/

  ===========================================================

  Troubleshooting:
  http://kb2.Adobe.com/CPS/191/tn_19166.html

  Flash Player doesn't work (32 or 64-bit)
  http://kb2.Adobe.com/CPS/837/cpsid_83715.html

  Troubleshooting player stability and performance
  http://blogs.Adobe.com/JD/2010/02/troubleshooting_player_stabili.html

  Flash Player Support Forum
  http://forums.Adobe.com/community/webplayers/flash_player

  ============================================================

  Flash Player 64-bit: http://kb2.adobe.com/cps/000/6b3af6c9.html

  You can install Flash Player 11 on 64-bit Internet Explorer on Windows 7.
  http://kb2.Adobe.com/CPS/000/6b3af6c9.html#main_Install%20Flash%20Player%20on%2064-bit%20Internet%20Explore

  J W Stuart: http://www.pagestart.com

• Start-up/login problem. Vista starts by the boot sequence then cursor and black screen appears but nothing else.

  My laptop recently locked up when running a DVD rip, I waited an hour or so to see if he would respond, but he didn't, so I turned off the laptop by holding the power button down. I restarted the computer and it loaded correctly to the logon screen and allowed me to log in as usual. Once the computer was connected, I noticed that the sidebar was not loading, and when I click on what whether the locked computer.

  To try to remedy this I tried to start the PC in safe mode to perform a restore could noticed that I had not created restore points. I then tried to fill a start last known good config upward, it did not work. Then, I tried a CHKDSK/r procedure at startup. It worked fine until step 3 of 5, on which he seems to hang, I left it overnight and it was still on the same stage. So I have powerd off the PC and tried to start. But now, the PC is delivered to the black screen and the cursor as shown above.

  I created the new folder of the event log of the prompt on the Vista recovery disc option

  I did a repair to start - no problems found

  I checked that regedit in this \Microsoft\Windows NT\CurrentVersion\Winlogon. shell contains only explore

  When you are looking for through other Forums a cause of this problem appears to be to do with the permissions of the user being changed by the chkdsk does not complete, however I don't see how to fix this through the command prompt.

  As noted, I can access command prompt on the recovery disk. Any help or suggestions are greatly appreciated.

  You already did a great job of troubleshooting - exactly what I would have recommended here if you had not already tried.  Play well!  Here is one that you did not and I would start one you tried (because I feel that it is perhaps the root of the problem.

  Go to start / all programs / accessories / command prompt, right click command prompt and click Run as administrator (you can skip this step if you are using the disk).

  If you use the drive, cd to C:\Windows\System32. Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  Try to put all the corrupt files here so that we can see if they can be repaired with good copies of the installation disc (unless there are too many).

  While in the command prompt, type chkdsk /f /r and enter and let it run.  She might want to plan itself to run at the next reboot (but I don't think that will happen if launched from the disk).   If so, answer Yes and restart to run the program.  It will scan and attempt to resolve any corruption or bad sectors on your hard drive and remove especially as a potential cause.  I know you tried this before, but we'll try again by using a slightly different command and see if it works this time.

  I hope this helps.  If this isn't the case, then we should try to reinstall the system (backup first) as only option short taking in a computer repair shop. But we'll see what happens with the first above.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows 7: Black flash of the screen and no user at startup

  Whenever I boot Windows 7 Home Premium on my wife s Dell, no presentation of users after the Welcome screen. Diagnoses are thin back and there is no change in safe mode. It shows just the white background of Windows 7 and periodically flashes black. This is my wife's computer, and I can't do anything for risk data. Thanks for any help.

  Original title: no user at startup

  Hi Spencer,.

  Thanks for posting your query in Microsoft Community.

  Sorry for the inconvenience caused with Windows 7.

  More details would help us to best help you.

  1. "diagnoses come back fine and there is no change in safe mode", you are faced with this problem to the in/login-login screen? don't you realize that the user accounts to the login screen?

  2. "periodically flashes black", are you able to get to the login screen or this problem occurs before the login screen?

  3 did you do any change in software on the computer before this problem?

  4. What is the brand and model of your computer?

  Unplug all external such as USB key, printer, and scanner etc., devices (except keyboard and mouse) connected to the computer and check if the computer boots to the screen.

  If this problem (white screen) occurs before the login screen, you can do the Startup Repair by referring to article.

  http://Windows.Microsoft.com/en-in/Windows/Startup-Repair-FAQ#1TC=Windows-7

  If the problem persists please see "start the computer in safe mode and run System Restore" and check if it helps.

  http://Windows.Microsoft.com/en-in/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  After you start the desktop successfully, please visit the manufacturers Web site and update the graphics drivers.

  Hope the helps of information. Don't answer if you need more assistance.

  Thank you.

• U2715H, black flashing, disable the CSM in the bios

  * What operating system? Windows 10
  * Which video card? Gainward GTX 1060 6 GB
  * Video card driver version? Last Nvidia
  * Which ports are available for the video card? Several
  * Which video output from the video card port video on the port monitor do you use? DP > CDM
  * What cable are you using to set the video card to the monitor? DP > CDM
  * What Windows power plan? High Performance
  * Press the Menu button of the monitor to open the OSD (On Screen Display). The bottom of the screen should display a resolution. What is not? 2560x1440p
  * Has been the monitor purchased from Dell or a reseller? Amazon.de

  You can see the issue here

  www.YouTube.com/watch

  Gainward Gtx 1060 6 GB, i5 3570 k OECD 4.2 GHz, 16 GB of DDR3 RAM, Z77 Pro4, XFX Core Edition 650W 80 +.
  Monitors: Dell U2715H, Asus MX239

  Since the upgrade from GTX 660 > 1060 sometimes my U2715H Dell (1440 p) don't seem to be getting through DisplayPort signal when connected to my new GTX 1060 and starts "flashing" black. During this time I don't see anything about, the menu of the monitor even because it is completely black. This does not always happen, during boot that can't not what I thought, but when Windows loading sometimes starts, it becomes completely back until I have swap around the cables and inputs. However my other monitor connected with HDMI seems not at all affected while the other is flashes, there no CDM or DP to test with that. So I have a flashing monitor and the other being completely affected by it.

  This happens only with miniDisplayPort and DisplayPort so far, I've tried all 3 inputs on GPU and CDM and DP on monitor. This question was not present with my previous MSI GTX 660 Twin Frozr, he also only CDM. When you use HDMI it seems to be normal without blinking, but I need to test again because it does not always happen. Changing resolution does not help. Allows to close the monitor for a few minutes, but it can happen again. Tried to use DDU 3 times to fix without success so far. I guess it's the driver or the GPU, doubt it's the monitor because it worked fine on previous GPU. Any ideas?

  Fixed it by disabling the CSM in the BIOS. Been very well for 5 days, he became black once today, but has resumed normal again.

• Satellite P750 - grey and black stripes on the screen

  Hello

  I BOUGHT MY NEW TOSHIBA (3D) AROUND A MONTH AGO P750
  AT TIMES RANDOM SCREEN WILL BE BANDS GREY AND BLACK HORIZONTAL AND VERTICAL
  IT IS GETTING WORSE FROM WHEN HE STARTED
  ALSO WHEN PUT ON THE TOSHIBA START LOGO ON SCREEN BEGINS TO BLINK
  SOMETIMES PASS THE SCREEN WIL HELP.
  NOT VERY HAPPY AS ITS NEW BRAND.
  COMPUTER LAPTOP MOVES FOR EXAMPLE HIS USE NORMAL OF A HOME WORK.

  ANY IDEA WAT I HAVE TO DO?

  In my opinion not only make sense for you is to contact your local dealer where you bought your laptop or a provider of services of Toshiba directly.

  You have for laptop with a valid warranty and if something like this happens, it must be fixed, or you should get the new laptop.
  Call the service, ask for help and I'm pretty sure that they will help you with that.
  Do you know how to find Toshiba service in your country?

• An area or a window, black, flashing around the screen, preventing the normal operation of the computer.

  I have a flashing and move the black box. In addition, a little black "bug" moving on the blue bar at the bottom of the screen. I stopped him temporarily. It says "the application could not initialize properly (0xc0000142). Click OK to close the application. "When I do the flashing box back and kind of takes the P.C., preventing a 'normal' operation of the computer. Any thoughts, please? As you can tell I am ignorant with respect of the computers please dumb it down for me? Thank you.

  At the moment, it seems to be contained in a box titled "cmd.exe - Application error.

  Can I get rid of this or should I consider for repairs, once again?

  Thank you, Alan

  I turned on the computer this morning and "PRESTO!" It has been fixed! I just figured (assumed) the fairy Magic computer was coming over the magic fairy dust at night and sprinkled on the keyboard and instantly, better everything! Ridicule me.

  Joking aside, this means - it has declined and is still in my system, lie dormant, so to speak? He wasn't there this morning. I honestly thought that Microsoft Security had just sent an update and just sort of 'fixed' it. I am both ignorant and naïve.

  Don't tell the bad guys, or I'll be marked, "EASY!" as a target.

  Should I just leave well enough, only? As in, if it's not broken, don't fix it.

  Or I followed the procedures laid out for me in the above section?

  I know I'm not very clear. I'm sorry.

  Alan K Phillips

• Problems with windows 7 Facebook scrabble. It changes the sceen and will not load the game. Any ideas?

  Seems to be a problem in windows 7.

  Hello

   

  
  1. is this a problem with only on this game on facebook?
  2 are you able to access other videos and games on facebook?
  3. what internet browser do you use?

   

  If you use Internet Explorer you can see the steps below.

   

  Method 1.
  Given that most of the games requires the Java runtime library or Adobe flash to work I suggest you to install the Java runtime library on Internet Explorer and Adobe Flash Player.
  a. Update Flash player and Java Flash:
  I recommend you update Adobe flash player on the website below:
  http://get.Adobe.com/flashplayer/

  b. also download and install the library Java Runtime from the link below:
  https://www.Java.com/en/
   
  Method 2.
  a. If the problem persists, you can optimize Internet Explorer.
  See the link below for more information.
  How to optimize Internet Explorer?
  http://support.Microsoft.com/kb/936213
   
  b. If nothing works to solve the issue try reset Internet Explorer.
  How to reset Internet explorer:
  http://support.Microsoft.com/kb/923737
  Note: After resetting Internet explorer you will need to install Java runtime library and Adobe flash again.
  WARNING:
  Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will erase browsing history, delete all temporary Internet, cookies, form data files and especially all the passwords.
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.