Problem with the displacement map

Similar Questions

• Problem with the drive mapping with error code 1312 network

  Hello guys.

  When I use the function of network with the config below card reader in the enterprise, it takes so long when connecting and finallly gave the error message

  (who needs to connect is a group of servers and we use the domain name to access)

  

  

  error message:

  However, when you use the following configuration, it could connect successfully.

  

  

  Also when using net use command line, he gave the missage with 1312 error code error.

  Do you know what exactly is causing this problem and give a solution?

  Given that we have to use the map network drive feature in our program.

  Thank you very much!

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Hope this information is useful.

• problems with the site map

  Hi all

  Ive been trying for hours and Im stuck again. I wish I could call for bc and talk to someone live. I would pay 200 months for this.

  in any case, here's my problem.

  I ran a test of sitemap webmaster tools and it worked fine except that he say I have 32 questions where sitemap URL is blocked by a robots.txt file

  I then went to my sitemap.xml sites http://www.hashems.com/sitemap.XML and copy and paste the URL that I thought I might have a problem with my browser.

  The plan of the site gave me shows URLS that are no longer valid. I changed a few names of URLs for SEO purposes.

  Example of

  http://www.hashems.com/store/coffee/hashems-signature-blend-60-light-40-dark-roast-16oz

  has been changed to

  http://www.hashems.com/store/coffee/hashems-Turkish-coffee-60-light-40-dark-roast-16oz

  But my Sitemap still shows the old URL which, due to my change them are now broken. The < changefreq > is every hour, so doesn't mean that my new URL should appear?

  And is there a way for me to see exactly what 32 urls are blocked by robots?

  Help, please

  www.hashems.com

  Hello

  The sitemap file regenerates every 24 hours. The task that runs every day will pick up the changes and update your sitemap.xml.

  See you soon,.

  -mario

• Problem with the application Maps Idealpad A1

  I just bought tablet A1.

  When I try to use the Maps application, the system should start reboon in 2-3 sec and I can't use the App.

  I bought 3 tablets for my 3 girls, and each system has the same issue.

  Do you know a solution?

  I had this problem yesterday when I updated Google Maps to v6.0.0, fortunately I was able to uninstall the update & return v5.8.0 & now it works OK once more.

  I don't know if this will solve your problem, but there is a copy of subject v5.8.0 to halfway down this page:

  http://www.apktops.com/Google-maps-5-8-0-world-wide-navigation-activated-support-unrooted-device-now...

  Max

• problem with the drive map satellite p200-1ba (pspb6e) on windows 7

  Hello! I have recently upgraded to windows 7 and my card reader does not work. I have a laptop p200-1ba (pspb6e) satellite. I installed intel chipset utility, robson package and everything seems fine in Device Manager, but nothing happens when I insert my card in the card reader. Anyone any ideas? Thank you.

  Hello

  > No support of flashcards for windows 7-32 in the downloads section

  Have you tried Vista? Most Vista drivers are compatible with 7

• Problem with the ISATAP #3 map

  Hi I have a problem with the ISATAP #3 card. I read a previous thread who recommended to uninstall and then put it back, which I've tried, but the pilot does not re - installed. Can someone help me with this? Thank you

  Jack

  Hello

  Control Panel - Device Manager - do a right-click on the two - UNINSTALL - REBOOT

  Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you want and
  on some computers, it will always be there but don't cause any trouble.

  On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
  ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
  error message.
  http://support.Microsoft.com/kb/932520

  Check the answer by Diana D. here:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/a75e8bf1-9a63-4CF4-BF6C-d43a26175959

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Satellite C850 - found problems with the networking and the FN key

  Hey everybody,

  I work on a Satellite Toshiba C850, that my parents recently bought and spin in a certain number of questions.

  (1) wireless won't connect to my network. Have done the following: verified by connecting on two other computers, reset the router, the open network, reset the map, reinstalled the realtek drivers, checked the settings in the networking of Toshiba Utilities. End result is he's going to try, and fail. Wired LAN works fine.

  (2) FN key does not work. Have you checked the region and it is OK, have tried to use the Flash cards - no change, checked with the screen keyboard and can check the FN key does not register.

  I noticed that the first problem is common, but there are obvious positive results. If anyone can offer any assistance, I would appreciate it a lot.

  Before you begin to discuss your problems can you please tell us what OS you are using?
  Are you using the original OS that you got with your laptop? I mean original recovery image has been tested and works correctly, with the factory settings that all should especially the FN keys.

  1 / What do you mean with refusing? your WLAN is visible for your laptop?

  2 / if there is problem with the feature keys FN and you use Win7 try please reinstall extra package from Toshiba.

• Starting problem with the gray screen on iMac

  Hello everyone

  I'm a bit puzzled with a problem I'm having with my iMac 27 "a model late 2009, bought in early 2010, I had built at the time with 8 GB ram, 2 TB HD and fastest i7 Quad core processor available at the time.

  I'm running El Capitan, and all wise OS is perfectly up to date.

  The other week, after a systematic restart, I have a gray screen and little else.  Another reboot and everything was "normal", so I did not concern me unduly.

  Today, after that the Mac had been idle for a time during a call, the screen fell asleep as usual (I do not SLEEP the computer itself), but during his return and touch the SPACEBAR and key "ESC", the screen remains black.

  So I made a forced shutdown and restart.

  I get the screen gray and normal startup (no other sounds) chime followed by the apple logo and the startup progress bar.  He gets to halfway through the long, and then instead of bring to the top of the login page, it's just going to a gray screen Uni.

  So I restarted in safe mode, OK and ran disk utility a couple of times - at the first crossing, he noted, there a problem with the map of partition which can cause problems starting, but on the second passes and the following, everything has been noted to be OK - and the SMART status of disk has been verified.

  After a reboot - the same question as above - of carillon, gray screen with the apple logo, progress bar and then just a gray screen.  I did another secure boot and re-run of disk utility, rebooted into recovery mode and run disk utility.  And again, no problems reported.

  Another reboot and the issue was always there.

  So this time I rebooted into recovery again mode and downloaded a new installation of El Capitan.

  Unfortunately, there is no set - it is always start on a gray screen after the startup chime, the apple logo and progress bar.

  I have also removed all my account account startup items and disconnected all USB devices.

  I'm a bit lost for what to do next to be honest!

  Is there anything else I can do software wise, at home, or is it time for the repair material re shop perhaps?

  Thank you very much for your words of wisdom and support

  Kind regards

  John... :-)

  John here again: :-)

  Just a quick update which may help to determine what the problem is: I restarted in safe mode, after the reinstallation of the operating system was unable to initialize properly - grey screen again.

  However, as I have a home network, I found that I can not connect on the network with my MacBook Pro to the iMac, see all my files user on the iMac and even copy them across to the MacBook Pro with no problems.

  Everything on the iMac is saved via Time Machine on a Western Digital Firewire HD 3to.

  I also have uncompressed manual 'straight' copies of my music, movies, documents folders, etc, for an old time Capsule, currently acting as a bridge to my ethernet network wireless, and provide additional backup for those critical files - my music for example is ripped 350 odd CD, all legally purchased in ALAC on iTunes on the iMac - which represents a couple of months of work... lol... no way I want to lose that!

  So I'm a bit of a loss.  Disk utility reported no problem with the drive... I can boot into safe mode and recovery, but normal mode 'mode '... I always get the chime, the screen with apple logo and progress of the gray bar, then goes to just a gray screen instead of the login page.

  Help!

  My beloved Einstein had a hiccup!

  All comments appreciated and thanks again - hope this extra info helps

  Kind regards

  John... :-)

• Delay in an executable LabView 10 starting with the present mapped drives in Windows 7.

  I am running windows 7 on a network peer-to-peer without internet access with an executable version of LabView 10.  Executables mapped access folders on the network and works very well once it is up and running.  The problem is the time required to run the executable when the mapped drives are present.  It takes about 65 seconds to start and now, windows displays the message "not responding".  But it always starts.  If the mapped drives are disconnected, the executable file starts in 5 seconds.  The same executable running under windows with the same mapped drives THAT XP doesn't have this problem.  Any ideas?

  Hello Rgenaway,

  Probably, it is simply a matter of Windows than a problem of LabVIEW. The difference between the time it takes to start when the drives are present and absent could be due to both the application and the readers need to connect and start communicating.

• HP pavilion dv6-2150us: problems with the upgrade of processor for an i7-720qm on a hp pavilion dv6-2150us

  Hi all

  My friend recently bought an i7-720qm processor used to upgrade hp pavilion dv6 2 1 5 0 US and I

  summer giving a helping hand by making the upgrade.

  Since the 10 Windows running Google Chrome used up to 70% of the processing of an i3 - 330 m power

  processor, it seemed to be good upgrade to improve the performance of the laptop.

  We checked that the new i7 processor is compatible with the laptop (it is listed as supported by the)

  ( interview guide , page 108), and the seller assured us he tested the CPU on some different

  HP pavilion and it worked fine.

  But when I replaced the processor with the i7 processor i3 and tried to boot up the laptop, only the LED lights

  on the front and the setting of the power and volume buttons would light up periodically. The screen was black

  All the time.

  Thinking I might have made a mistake during the reassembly of the laptop I put the original i3 processor back in

  and it starts fine.

  I updated the BIOS of the F.1C version I found on the internet and once replaced the i3 with the i7 with the

  same results - display off, flashes periodically LEDs. The BIOS updated smoothly, and the correct version is displayed in the main menu of the BIOS.

  I am confused on what could be the problem with the upgrade, everything should work. Is there a BIOS update I have

  missed, or the problem elsewhere?

  Disassembly and reassembly are made with care, and we took care to avoid static electricity. All the rest

  on the laptop works well - I am writing this post on the laptop in question with the original i3 processor in place.

  Any help, advice or general guidelines as to what should be done would be really appreciated.

  Thank you for your attention.

  Hello:

  The problem is that if you look in Chapter 3 of the manual, pp 22-23, there are maps of separate used for the dual core and quad core processors system.

  In other words, you cannot install a quad core processor in a Board that originally had a dual core processor and vice versa.

• Issue of 'no networks detected. Problems with the AR5BWB222 driver for WiFi adapter. Help, please!

  Hi all

  I need your help!

  then a few days ago my wifi started playing on my acer Windows 8 V5-552 and I have decided to update the driver for the card. I did this by unistalling and re-istalling the driver for the Atheros AR5BWB222 map I downloaded from this site acer very (it turns out it's the same version), now I have no WiFi connection at all (I am currently using ethernet cable but I need to be mobile around the House!). Troubleshooting does not help and said "there could be a problem with the driver for the WiFi card" and when I click fix problem there is no NOTHING (why did even give the option?). Did a system restore and that didn't work because of my antivirus and there still nothing when I turned antivirus off the coast. Then I read a lot of forum preveous questions on this driver and no solutions helped, maybe because everything is last year.

  I really want to avoide a factory reset as I have some programs here that will be very difficult to acquire again.

  If you're still here after my speech, I am greatfull and also want your knowledge and advice about this superior! Please help me!

  What antivirus program you are wrong with turning off? I know that some may be stubborn. If the AV program refuses to turn off this feature with a selective startup in MSCONFIG, then you can try to uninstall it completely in the PANEL. Then try to restore to the previous new date

  Jack E/NJ

• Strange problems with the database

  Hello

  I just got my Fuze and am very happy with it; However, I am having a very strange problem with the database. I have a 16 GB sdhc card that I use with the "rocket" and there are about 4 songs on the card that will not play and have no information charge tag. Their tags appear in the tag browser (not the in the track information screen) as just an empty rectangle. Under the track information screen, sizes are listed as ~ 4000 mb. The songs will not play and I can not jump in front of one of these songs once they were loaded.

  At first, I suspected some kind of corruption of tag, so I set out that night to track down the problem. I removed the 16 GB card and reset the player. Then, I loaded one of the corrupt in the internal memory of the player. The track has been scanned and played correctly. Then, I removed the track of the internal memory and it loaded on another SDHC card. Yet once, everything worked correctly, so I knew that the card I was using was a kind of system files or physical problem. I returned the original 16 GB sdhc card in the reader and checked that the file was still unplayable, and then I plugged the "rocket" to my computer. I transferred the unplayable file on my computer and compared (with md5sum) to the original file, thinking that if there was the file system or physical corruption the copy of the map would be damaged. However, the files were equivalent.

  To make things even more interesting, I also have problems with the registration of the kind. I have some files tagged Genres such as 'Classic' and 'Rock '. In the list of the genre, I see this:

  C

  CL

  CLA

  CLAS

  Class

  Classic

  Classic

  Classica

  Classic

  Rock

  So, there is corruption on the kind of 'Classic' but not the kind of "Rock". Each of the substrings of 'Classic' contains only a few titles, with most of the other titles listed where they should be. I checked that the tracks are labeled correctly and in exactly the same way as the other tracks that do not have this problem.

  I am at a total loss about what to do, and I'd really appreciate any advice or suggestions. I use the current firmware, 2.03.31a and the songs in question are in Ogg Vorbis format.

  MM

  Thanks for your replies.

  I managed to find what may be the problem. Tracks that received corrupt tags had the names of total path with more than 256 characters. It seems that the driver internal fat32 the rocket uses vomits all over the place when the path name is too long. Before the "rocket", I got an iPod running rockbox tags with the same directory structure that I have on the "rocket", so I don't think that this restriction on the length of the path name is a limitation or requirement of the fat32 file system. Reduce the path corrected the problem with the files being unreadable.

  However, the problem with foires genres the rest. Looking at the files show that corruption, they all have a little information in tags. Most of the information is contained in the hashes I have files that identify them via musicbrainz. The limit on the total number of characters in the tags of the track includes the "rocket" label is not read or use?

  MM

• I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000

  Hello! I have a problem with the #2 Microsoft tun miniport adapter. It cannot start. FileVersion pilot because it is 6.0.6001.18000 (longhorn_rtm 080118-1840). I have a problem because my internet is not working because of the adapter, so I'm not able to use your forum solutions requesting that my internet is working. So, can you give me some advice on how to deal with this problem.

  Hello

  Refer to the answer posted by Sabrina Shen in the following link to resolve the problem:

  Map #2 Microsoft Tun Miniport

  See also:

  The problems of Internet connection

  Network connection problems

  Why I can't online?

  Windows wireless and wired network connection problems

• problems with the internet connectivity and card # 2 microsoft tun miniport

  Hi, I have problems to connect to the internet and my laptop tells me them a problem with the modem / router. However, another laptop computer connected to the modem/router even works very well. in the Device Manager was an exclamation mark beside "teredo tunneling pseudo interface 10. then it disappeared and I found myself with an error with «#2 microsoft Tun miniport map» now his party in error teredo. I still only have a local internet connection i.e. no internet. not really have a lot of knowledge when it comes to computers. any help would be really appreciated.

  Hello

  You can try the steps in the similar thread to the next with a possible fix:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Teredo-tunneling-pseudo-interface-this-device/757db042-c91e-464c-B963-c1f442fdf925?page=1

• Problem with the West with Visual Studio 2010 and Oracle 12

  I can't get the OCCI driver to work. The following code generates an error of access violation in the createConnection call:

  #include < Windows.h >

  #include < occi.h >

  #include < exception >

  #include < sstream >

  using namespace oracle::occi;

  int main (int argc, char * argv) {}

  std::ostringstream s;

  try {}

  Environment * env = Environment::createEnvironment (Environment::DEFAULT);

  Oracle::OCCI:connection * ptr_conn = nullptr;

  ptr_conn = env-> createConnection ('test', 'test', ' localhost:1521 / web ");

  env-> terminateConnection (ptr_conn);

  } catch (SQLException & to) {}

  s < < "SQLException:" < < se.getMessage () .c_str (); "."

  } catch (std::exception & e) {}

  s < < e.what ();

  } catch (...) {

  log. Error ("unknown exception.");

  }

  OutputDebugStringA (homobasidiomycetes () .c_str ());

  }

  
  

  This piece of code is executed directly in VS2010 on a box of 8.1 to win. He is bound with oraocci12d.lib and compiled with the option/MDD.

  I use the instant client libraries.

  
  

  If anyone has experienced this?
  

  It seems I was a little liberal with the displacement of libraries linked to in the instant client, i.e. copy the lib file and function of .dll files to another location.

  Execution of the executable in the instant client directory with present all the dll solved this problem. I didn't because DependencyWalker said

  me, everything was fine.