Large number of files in the directory profile with at sign in name

Similar Questions

• RN104: 6.4.1: could not open the folder with a large number of files

  Hello world.

  I have a situaton that I can not open a previous file created with a large number of files stored in it.

  There at least 2000 photographs, and when I try to browse, the content is never displayed.

  Curiously, traversing a small file with say, 1000 records, it opens right.

  I have reset the permissions without effect and I can't open it with RAIDar is.

  Any suggestons? I'm about to happen for the pallets of the defibrillatior!

  Thank you!

  Hello Stephen

  I was finally able to recover my files 3000 + using 'snapshot' and download the files on my computer!

  I found a date where they were all visible.

  I bought a new RN204 and move them to the new unit, as well as all my other data.

  It is much faster with more memory as well.

  Thank you

• BSOD after copying the large number of files from one disk to another

  Hello. I hope you can help because this issue is very frustrating. Just built a new PC:
  -Gigabyte Z97X Gaming 7 mobo
  -8 GB Corsair vengeance 1866 mhz
  -EVGA GTX 770 video
  -CPU Intel 4770K
  -two hard drives of 1 TB WD black in RAID 1
  -one ADATA 256 Gb SSD as drive OS
  -a 1 TB drive Toshiba
  -Windows 7 64-bit professional
  -F3 Bios Rev

  System can work very well for everyday, but when I copy large number of files from one disk to another (i.e. 70 000 files, 80 GB), shortly after (10 to 30 minutes), I get a BSOD bugcheck.

  I ran MEMTEST86 for hours without error. I can run PRIME95 with max heat without error. And as I said, it seems to be fine until I do a copy of large files. It seems not to matter to this disc, I copy to/from. Start WIndows, I see no activity CHKDISK. Ideas?

  Log name: System
  Source: Microsoft-Windows-WER-SystemErrorReporting
  Date: 25/06/2014 19:55:50
  Event ID: 1001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Daddys-PC
  Description:
  The computer was restarted after a bugcheck.  The bugcheck was: 00000124 0 x (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401). A dump was saved in the: C:\Windows\MEMORY. DMP. Report ID: 062514-6692-01.
  The event XML:
  
   
     
      1001
      0
      2
      0
      0
      0 x 80000000000000
     
      32358
     
     
      System
      Daddys-PC
     
   
   
      0 x 00000124 (0 x 0000000000000000, 0xfffffa8008788028, 0x00000000bf800000, 0 x 0000000000200401)
      C:\Windows\MEMORY. DMP
      062514-6692-01
   
  

  No problem, thank you!

  All attached files of the DMP are the verification of bug WHEA_UNCORRECTABLE_ERROR (124) .

  A fatal hardware error occurred. This fatal error data error Architecture WHEA (Windows Hardware).

  If we run one! errrec on the 2nd parameter of the bug check (address of the WER structure), we get the following:

  ===============================================================================
  Section 2: x 86 / x 64 MCA
  -------------------------------------------------------------------------------
  Descriptor of @ fffffa8008788138
  Article @ fffffa80087882c0
  Shift: 664
  Length: 264
  Flags: 0x00000000
  Gravity: Fatal

  Error: Internal unclassified (Proc 4 row 1)
  Status: 0xbf80000000200401
  Address: 0x00000000fee00040
  Misc.       : 0 x 0000000000000086

  Internal unclassified error, this implies that it is not publicly documented and there is no way to identify the error.

  -----------------------------------------

  1. AppleCharger.sys is listed and charged, which is the driver GIGABYTE on / off Charge. See here for more information - http://www.gigabyte.us/MicroSite/185/on-off-charge.htm

  Very annoying software, so please uninstall ASAP!

  2 remove and replace Norton with Microsoft Security Essentials for purposes of troubleshooting temporary, as it can be at the origin of the conflict:

  Removal of Norton- https://support.Norton.com/SP/en/us/home/current/solutions/kb20080710133834EN_EndUserProfile_en_us;JSESSIONID=841A6D40BA6872C47697C6C6B19C8E11.4?entsrc=redirect_pubweb&PVID=f-home

  -MSE http://Windows.Microsoft.com/en-us/Windows/Security-Essentials-download 

  3 uninstall Gigabyte Saver Easy, Easy Tune, as well as all the another bloatware Gigabyte, it is very problematic.

  4.

  2: kd > lmvm marvinbus64
  start end module name
  fffff880' 04c 51000 fffff880'04 c 95000 MarvinBus64 (postponed)
  Image path: \SystemRoot\system32\DRIVERS\MarvinBus64.sys
  Image name: MarvinBus64.sys
  Timestamp: Fri Sep 23 17:17:03 2005

  Pinnacle Studio Marvin Bus driver, dated 2005. Too old to work with the operating system, so please delete the software + the device (if any).

  5 please remove your Rainbow Tech/SafeNet USB security device if there is no update for its software, device drivers are too old.

  -----------------------------------------

  If all else fails, there's only so much you can do with an error like this, checking until it boils down to a faulty processor that needs to be replaced. Start from 1 and work down:

  1. make sure your temperatures are the norm and nothing is overheating. You can use a program such as Speccy if you want to monitor the time - http://www.piriform.com/speccy

  2 clear your CMOS (or optimized load BIOS default) to ensure that there is no parameter incorrect BIOS - http://pcsupport.about.com/od/fixtheproblem/tp/clearcmos.htm

  3. make sure that your BIOS is up to date.

  4 if all else fails, the only one left to do is replace your CPU because it is defective.

  Kind regards

  Patrick

• I was trying to import a large number of files on 10 Organizer.  10 Organizer now hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  mercad611 wrote:

  I was trying to import a large number of files on 10 Organizer.  Now, the organiser hangs at the launch.  The Welcome screen appears for a second and then crashes.  How can I fix it?  I use desktop iMac with Yosemite.

  If the problem is related to a corrupted catalog, try to open the organizer with a new empty catalog.

  Hold down the SHIFT key at the launch of the Organizer. You get a dialog box with the choice to start with a new catalog, or start with a different catalog and even to 'fix' the current catalog. If your organizer starts with an empty catalog, use the option 'fix' on your corrupt catalog.

• Why Windows Phone Desktop App Say it's to delete a "large number of files?

  For the love of God, I want to only synchronize 19 pod casts and he wrote that a large number of files is deleted!

  What's wrong with this? *

  Why can't I synchronize just what I chose to synchronize?

  Hi Alan,

  Please provide an update on the issue.

  You try to synchronize the podcast on Windows Phone, you can view the query in Windows Phone forum.

  Let us know if you need any other assistance on Windows.

• Modern slow mail app or crashes if you have a large number of files

  I have a large amount of mail and upgraded to the new mail app, when I open the mail or switch folders that the app gets real slow. How can I fix?

  After the update to your e-mail to 318 version application, you may have noticed that when you open mail or change records/account app slows down or crashes. This happens if you have a large number of files, usually around 200 to 300.

  Note: to find out what version you have:

  1. open the Mail application.

  2. drag the right edge of the screen, or move your mouse to the upper right.

  3. Select settings and click on to words. (The version number appears.)

  Workaround

  The only way to avoid this problem is to reduce the number of files.

  Once you reduce the number of records to a more acceptable level, the Mail app will work normally.

  More information

  Windows Mail: Setting up an account of end-to-end

  Solve problems with Windows Mail

• CC of Dreamweaver on iMac very slow to open sites with a large number of files

  In recent weeks, a site I've worked regularly for several years began to take 10-15 minutes to open. A pop up says it checks the files, but the button that should allow you to escape this process does not work. The site has about 120 000 files located in different folders, and this was never a problem in the past. To access the site, the only way is to wait until the course ends and the spinning ball to go. I read the thread on the port of Skype settings, but I think that this may be a different problem because even though I have installed Skype I rarely running and only one of my sites is affected.

  Any ideas?

  With a large number of files, it would be a good idea to disable the cache of Dreamweaver for this site.

  1. Site > Manage Sites.
  2. Select the site, then click on the pencil icon to change site settings.
  3. Select Advanced settings > local news in the list on the left of the Site Setup dialog box.
  4. Uncheck the Enable Cache.
  5. Save > fact.

  Another possibility is that your Dreamweaver cache is corrupted (probably with as many files). See remove a corrupt cache file.

• How can I save a large number of files tif into jpeg files?

  How can I save a large number of files tif into jpeg files?

  Hello

  You can convert to PDF ' first through batch conversion.

  Please see the following to the same forum thread.

  Batch convert TIFF to PDF

  Once converted to PDF ", you can convert and save in jpeg.

  Hope it will work for you.

  Concerning

  Sukrit diallo

• I found a .txt file in the directory "DriverCure" that says "Called destructive Backend." What is c?

  I am running XP SP3 and I found a .txt file in the directory "DriverCure" that says "Called destructive Backend." What is c?

  ParetoLogic DriverCure is a computer program that scans all the drivers on your hard drive and compiles a list of those that are available updates.

  Checks the internet for the DriverCure files removal tools.

  Thank you

• There is no exe file in the directory can't find it on windows media player

  There is no exe file in the directory can't find it on windows media player

  There is no exe file in the directory can't find it on windows media player

  Windows media player exe name... wmplayer.exe

  Start > Search box, type wmplayer.exe > top left, right-click to wmplayer.exe > select the location of the opened file

• Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro?

  Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions?  Please

  Thank you

  Mike Tingey

  The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• Why can't I just copy a profile to another system in the directory profiles and modified the ini file

  My main system crashed. I have a copy of the profile. When I move a copy of the profile in the profiles folder and edit the ini file to use the new name, I get a message that there is an instance of thunderbird running and I need to shut it down. I don't see any instance of thunderbird anywhere in the Task Manager. It happens just for me the fact that I am also in firefox may be the cause of the problem to a running instance. I'm under V31.7.0

  I tried to simply move the mail directory in the existing profile. The thing is that I don't see the old messages. I can see all of the subfolders of the Inbox on the left but not messages in the right pain. I can see new messages, but it's all in the Inbox and not filtered to the subfolder.

  I tried to activate the function of multiple profile but that doesn't seem to work.

  MY BAD
  It seems that I had something that was bad in the profile. I got the profile from a backup and now Thunderbird works fine.

  Sorry that I missed the problem earlier.

• Technical support please - mistake made by moving the large number of files and folders to archive HD, lost of metadata and develop settings, how to correct the error.

  Hoping to hear support or senior tech posters that I made a huge mistake by following the instructions of a person who thought they knew of Lightroom, but didn't.

  Mac Pro, OS 10.10.3. 5.7 Lightroom

  Question:

  Moving about 750Go of files and the associated image files from my drive to Studio work TB 3 to a new 2 TB drive Archive. The first set of records, I moved to in Lightroom, that went well but has been very slow to do that I could move only 12 files at one time or the locked system. After looking online I've been advised to copy all folders that I wanted to go in the Finder, simply drag / drop files from one drive to the other and then synchronize from Lightroom. Files moved OK, but as I guess I should have generated. The XMP files in the moved files no longer have metadata or the development parameters.

  I did not do any work Lightroom since that, so I have the old catalog in Time Machine (hopefully!-j' heard that there may be problem with Lightroom and Time Machine catalog). I also have copies of backup of the work unit until I moved the files.

  I have 2 large jobs, I need to change as soon as POSSIBLE, so need to quickly solve this problem or the LR catalog is going to change and I will not be able to go back.

  Ideally, I'd like to talk to Technical Support in order to go through the steps and explain what I did and make sure I don't lose any data. Is there a number to call? The phone tree says no support for LR phone now...

  Good to hear! In the future if you want to move your image to another drive files proceed as I pointed out here: Adobe Lightroom - find folders and files moved or missing

  It greatly reduces the possibility of this kind of problem happens, and when it you will know because the number of folder, number of files, or size on the disk will not match. Try again until they do not match before reconnecting them with the LR catalog. Computers are dumb... then work smarter.

• Get the number of files in a directory

  Hello
  How would you find the number of files in a folder and then output to a variable which can be used as plain text in coldfusion? Also, I would be able to find the size of all the files in a folder and set it as a variable.
  
  Thank you.

  > I'm trying to get the combined size of all the files in a directory with no subdirectories.

  It requires just a small adjustment of the previous code, thus: