problem with the first program

Similar Questions

• I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  I had many problems with the first cc 2014 so I reinstalled it and now it says that I can not open my project because it was recorded on a newer version. Is there something I can do?

  Hi Gemma,

  It seems that after reinstalling, Premiere Pro no has not been updated to the latest version. Check your application creative cloud for updates. If she says Premiere Pro is up to date, try to update Premiere Pro through help > updates... option in Premiere Pro.

  Thank you

  Regalo

• I have exactly the same problem with the radial program point not to let me install mcafee what should I do?

  I'm having the same exact problem with the point radial program does not let me install mcAfee which can do?

  There is some information about this here: https://community.mcafee.com/thread/19119?start=0&tstart=0

  If this does not help, contact McAfee technical support. They should help you.

• Premiere Pro CS4 - problem with the monitor program.

  Hello. I am not able to solve the problems with the monitor using PremiereProCS4. When I drag a photo (also only one photo) in the timeline panel and read it in the monitor program, vision in the monitoring program is not monitor of race: black or a small part of the picture appear... sometimes changing colors. ASUS P5QPRO Intel 9550 and Sparkle Nvidia GeForce 9800 GTX + 1024 DDR3; directX and the latest gpu driver are installed. Different configurations of Strath discs have been tested. Where I'm wrong?

  Although largely in the max. PrPro range, which is always likely to much larger size than that required. This ARTICLE will give you general information and a workflow possible.

  Coming from the camera, JPEG should be RGB already, so no problems with CMYK.

  Good luck and hope that helps.

  Hunt

• Problem with the first pro effects controls

  Hi, Merry Christmas;

  I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:

  

  The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!

  I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.

  My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have

  inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river

  and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.

  The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)

  

  Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!

  
  

  

  Thanks for your suggestions... Claude

  Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.

  Claude

• I can't use my webcam to computers because of a problem with the cyberlink program

  I only had my laptop for less than a month. I went to use the web camera and succeeded in a first time. Now I can't access the web camera. The message that keeps popping up is a message about the cyberlink program. Can someone help me?

  Hi Lynda Haynes,

  1. What is the exact message you get?
  2. what operating system is installed on your computer?
  3. What is the brand of your laptop?
  4 did you go to the device manufacturer's Web site to download the latest drivers?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Update of your webcam drivers and check if the problem persists.

  Step 2:

  Uninstall and reinstall Cyberlink and check if the problem persists.

  Step 3:

  Test the issue in a clean boot State.

  Note: Follow step 7 to your computer as usual.

• Printing problems with the Paint program

  Used the Paint program for years, no problem.  Suddenly, every time I print get a very tiny copy as if it has been reduced by about 75%.  If I try to enlarge before printing, etc., it gives me anywhere between 10 and 20 white sheets before give me a very tiny copy.  I used different printers with the same result.  I love this Paint program and would like to get back to where he was.

  And the program of mystery?

• Problems with the external program

  I create programs programmer with a string. A job will be created to launch the channel. One of these programs Planner will have to call a file is under windows. Everything goes well with the exception of which translates an error indicating that the process cannot find the files referenced in the external program.
  
  Here is the error of the battery being captured in the job log.
  
  CHAIN_LOG_ID = "16735", STEP_NAME = "L90_ARCHLOGRMANBACKUP", ORA-27370: slave to the job could not launch EXECUTABLE type work
  ORA-27300: dependent operation of the OS: access enforcement officer failed with the State: 2
  ORA-27301: OS Error Message: the system cannot find the specified file.
  ORA-27302: an error occurred in: 6a sjsec
  ORA-27303: additional information: the system cannot find the specified file.
  
  This is the code I used to create the program:
  
  BEGIN
  SYS. DBMS_SCHEDULER. CREATE_PROGRAM
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , program_type = > 'EXECUTABLE '.
  , program_action = > ' C:\WINNT\system32\CMD. EXE'
  number_of_arguments = > 3
  activated = > FALSE
  , comments = > 'runs a RMAN backup compressed all archive logs generated by this process.
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 1
  , argument_type = > "VARCHAR2".
  , default_value = > "/ q"
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 2
  , argument_type = > "VARCHAR2".
  , default_value = > "/ c".
  );
  
  SYS. DBMS_SCHEDULER. DEFINE_PROGRAM_ARGUMENT
  (
  program name = > "RTDB. ARCHLOGRMANBACKUP'
  , argument_name = > "
  argument_position = > 3
  , argument_type = > "VARCHAR2".
  , default_value = > 'C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat '.
  );
  
  SYS. DBMS_SCHEDULER. ENABLE
  (name = > ' RTDB.) ARCHLOGRMANBACKUP');
  END;
  /
  
  To verify that the files referenced in the above code and paths are correct, I spent to the DB host and run the following command from the beginning... Run:
  
  C:\WINNT\system32\CMD. EXE/q/c C:\oracle\product\OraDB102\admin\DTOD\work\RMAN_ARCH_OPENDOR.bat
  
  It works very well.
  
  Someone at - it ideas?
  
  Thank you
  
  -Joe

  Hey Joe,

  What you run here are steps of external string, which are transformed into external work when they are executed (see steps chain) upwards in the view of all_scheduler_jobs so that they are running.

  All restrictions for outdoor work hold for the external chain so that you will always have to make sure that the agent Scheduler service is running as a user who has the logon as batch windows privilege and upward.

  A simple external task works for you? If this is not you should probably get that working first and then debug your chain example later.

  Hope this helps,
  Ravi.

• A problem with the first

  Hello, so I use first pro with my subscription of cloud creative for about a year, and all of a sudden its telling me that my trial is over and I need to buy it. But I pay each month to use it? Maybe I misunderstood, and this program is not included in the creative clouds, or maybe it was recently removed? I'm PRETTY sure that I used it before with creative cloud well. And I KNOW they were make my payments every month. I don't know what to do. I use it very often for school and I need to have access again. If there is a question about the end of adobe I need a solution as soon as possible.  I don't know if its the difference, but I have a macbook pro. What should I do?

  Hi Laura,

  You can follow the article: Solve common Adobe Creative cloud activation of (log) and questions (disconnect) disabling or error messages that will help you get your fixed activation problems.

  Let us know if it works or not.

  Thank you

  Yann Arora

• why I have a problem with the first?

  Help!

  I've recently updated my OS X to El Capitan after that, when I stop my script, my preview and the program looks like this (attached image)

  

  Is there anyone else with this problem? How can I solve this problem?

  Hello

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  Kind regards

  Navdeep Pandey

• Problems with the postal program error... System.IO.IOException: The handshake failed due to an unexpected packet format.

  Since a couple of days, I was receiveing an error message, I don't remember not change parameter or by downloading programs.  What to do to fix this problem...

  Unable to connect to mail servers. If please specify a valid e-mail server, the server properties, or check your network connection. The following exception occurred: System.Reflection.TargetInvocationException: Exception has been thrown by the target of a call. ---> System.IO.IOException: the handshake failed due to an unexpected packet format.
  at System.Net.Security.SslState.StartReadFrame (Byte [] buffer, Int32 readBytes, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.StartReceiveBlob (Byte [] buffer, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.CheckCompletionBeforeNextReceive (ProtocolToken message, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.StartSendBlob (Byte [] incoming, Int32 count, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.ForceAuthentication (receiveFirst, Boolean, Byte [] buffer, AsyncProtocolRequest asyncRequest)
  at System.Net.Security.SslState.ProcessAuthentication (LazyAsyncResult lazyResult)
  at System.Net.Security.SslStream.AuthenticateAsClient (String targetHost, clientCertificates X509CertificateCollection, SslProtocols enabledSslProtocols, checkCertificateRevocation Boolean)
  at System.Net.Security.SslStream.AuthenticateAsClient (String targetHost)
  at AdvancedIntellect.Ssl.SslSocket.StartTLS)
  -End of the exception stack trace internal-
  to aspNetEmail.EmailMessage. ? (String)
  to aspNetEmail.EmailMessage. ? ()

  I'll probably try disabling the Norton scanning function (which can require uninstalling/reinstalling Norton without this feature), as it can sometimes cause problems.

  Have you tried to contact support Email Sender Deluxe?

  -B-
  http://www.officeforlawyers.com | http://www.OneNote-tips.com
  Author: Guide to counsel for Microsoft Outlook

• Problem with the first

  Buenos dias a todos, hired the image of what sucede... no to porque pasa y asi en sales don't return, esto sucede con cada unos los proyectos as Ahmed aun cuando photos what estan well, porque los habia used are y renderizado anteriormente.¿AYUDA POR FAVOR!

  

  See answer #5 in https://forums.adobe.com/thread/1965850 for several Mac 10.11 El Capitan links

  -several links in this answer with various possible solutions for various problems... we can help

• Problem with the buyback program to HP for buying printer at special price

  A bid of HP for printers is direct until October 31, 2014, on this site:

  h41201.www4. HP.com/AdLanding/in/en/89614

  The problem is that the link above says: "this offer applies until November 1, 2014" and the link to register for the offer is not present.

  How the hell can I possibly register for the offer and buy a new printer in the terms of trade, if they continue to consider the offer after the expiry of the offer itself?

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• I have a problem with the Microsoft Programs work is not on the computer.

  Original title: programs MS 'arrested '.

  I was cold called by a company, (Smart snake) who told me that my pc has returned error reports and they can fix it, but they have to take control of my PC to do.  They forced me to put in "config" at the C prompt to show me how many MS programs have been arrested.  Anyone know if it is likley to be authentic and if so, what is the best course of action to make about the programs of the MS order

  Its all in the name; Snake - powder of snake oil

• Problems with the monitor program size?

  Hi all

  I was editing a sequence and things were dandy until the program screen size has changed for children.

  Here's a screenshot if you want to take a look:

  

  Here, plays the same video, but in the source monitor, the width of the screen is longer while the width of the screen of the program monitor is also enlarged and lower.

  Can someone help me get both screens, the same magnification and width?

  They have the same magnification (both on the adjustment) and have the same resolution if that helps...

  Thank you

  videosandrobots

  The sequence settings match the layer source footage?

  You seem to have HD or source on the big screen and a sequence of DV (SD or 4:3 aspect ratio)