Problem with the indicator parallel optimizer

Similar Questions

• Problem with the Lenovo Z510 battery indicator

  I have an old Ideapad of one year z510. Last week, the battery indicator began to stuck on 100%. So not connected, he stops suddenly without notifying me with 10% and 7% remaining notification. I tried to uninstall the Microsoft ACPI control method battery compatible from the Device Manager but no change... Anyone has an idea what should I do otherwise.

  Thank you
  Ahmed

  In response to customer relationships of unexpected problems with the performance of the batteries portable Z500 and Z510, Lenovo made an update of the firmware of battery available via download on the Lenovo Forums.

  This battery firmware is intended to solve unexpected load following symptoms when a Z500 and Z510 mobile phone is turned on:

  • Battery is dead
  
  
  • Battery is not detected
  
  
  • Battery is detected and charged 100%, but when the power is removed, the laptop turns off immediately
  
  
  • When the battery is fully charged and the AC power is removed, the battery level falls considerably less than 10 minutes

  Please note a procedure step by step for the upgrade of the firmware is included in the .zip file, found in the file "ReadMe".

  The battery firmware update can be downloaded here: https://download.lenovo.com/lenovo/content/sm/z500_z510_battery_firmware_update.zip

  Thank you

• Error message indicating the problem with the monitor of devices in Windows XP.

  Original title: Device Monitor

  Error message indicating the problem with the monitor of devices in windows xp. How to fix?

  Hello

  1. when exactly you receive this error message?

  2. What is the brand and model of your computer?

  3. What is the exact error message that you receive?

  Please provide us with more information about the issue so that we can provide you with the necessary assistance.

• Satellite A300-1MZ - Smart tool recognize problems with the drive

  Hi all...
  I have a * a300-1mz * I * a problem with the hard drive *.

  [This | http://img96.imageshack.us/i/diskinfoe.jpg/] is the _screen to a s.m.a.r.t. pens (* Disc 3.3.0 * Info) who acknowledge some problems with the disk.

  Can I send the laptop as collateral for a free replacement of the same disc?

  Among other things, sometimes * the computer freezes * no option to manually turn off the laptop (I think it always comes from the same disk):
  the screen stays fixed and 'Win Vista' does nothing comands.
  same "ctrl + alt + delete" Task Manager does not. The disc indicator light remains lit, but itself no longer believes it works

  Hello

  > Can I send the laptop as collateral for a free replacement of the same disc?
  If the authorized service provider can notice this problem too, you can get a new HARD drive for free. The ASP will order it and swap it out. It is a free procedure if your laptop is under warranty.

  > sometimes the computer crashes
  The HARD drive is perhaps the reason for this?
  Contact a service provider authorized giving them all the details and information. They can fix that also. :)

• Satellite Pro A120: I have problems with the installation of the graphics driver for W2k

  I installed windows 2000 on an A120, the system is fully packed and service updated before I even start to install the necessary drivers, I am unable to restart the system. I once, install as recommended drivers that I have problems with the graphics driver because it will not be installed because it requires a reboot and then I can't install new programs that require a restart that the driver has not been installed correctly.

  The laptop is a Pro A120, age of 1 week and came with XP home, because of this toshiba will not offer me support I changed the o/s even though they obviously support 2000 on this laptop, because they provide the drivers.

  Any ideas would be greatly appreciated.

  Hello

  Did you use and install the drivers from the Toshiba driver page right?
  The drivers of Toshiba W2k for Satellite Pro A120 have been published and are ready!

  But please pay attention to the Toshiba drivers.
  There are two different sets of Satellite Pro A120, with different drivers W2k!
  After choosing the good laptop and download the drivers please follow the proper installation order that is indicated in the document "installation instructions"! Check it!

  I think that if you follow this guide line everything works and runs correctly. Good luck

• Satellite L750D-1FD - problems with the display driver

  I got this laptop from my uncle and it was filled with junk and crapwares so I did a clean reinstall and upgrade Windows 7 Home to ultimate. I have a problem with the GPU, windows does not recognize it, or doesn't fly chart AMD.
  Processor is AMD A8 - 3520 M APU, and I think that the GPU is a Radeon HD 6620 G or something before the re-installation. I can't change the resolution, it stuck at 800 x 600, memory shows by n/a, Direct X features are not available, not from the downloaded display driver Toshiba worked.
  Dxdiag appears to the:

  Name: Standard VGA Graphics adapt
  Manufacturer: Advance Micro Devices, Inc.
  Chiptype: AMD ATOMBIOS
  : Type DAC: 8 bit
  Memory Approx.Total: n/a
  Current display mode: 800 x 600 (1 Hz)

  It nothing and can do with this laptop now because the GPU does not work as expected. Please, help me to solve this problem.

  Hello

  I found only Satellite L750D-1FD so I think you have this model. I want to help you on any other way. Here is the correct order of installation for Win7. Please check and install all the available stuff you can find on the download page of Toshiba - http://www.toshiba.eu/innovation/download_drivers_bios.jsp

  Win7 SP1
  4.9.2.0 TOSHIBA supervisor password utility
  TOSHIBA HW Setup Utility 4.9.2.0
  TOSHIBA Assist 4.02.02
  TOSHIBA ReelTime 1.7.18
  AMD driver 1.0.0.52 xHC
  8.834.1 - 110420 a-118118C-Toshiba AMD display driver
  TOSHIBA value added package 1.5.10.64
  ATI HDMI Audio Driver 7.11.0.7710
  Conexant Audio Driver 8.51.1.0a
  Wireless LAN driver
  Synaptics Touch Pad Driver 15.2.11.1
  V4.07 Bluetooth Monitor
  Atheros Bluetooth Driver Package v1.0.7 Filter
  Battery Bluetooth for Windows by Toshiba v8.00.06 (T)
  Atheros LAN Driver 1.0.1.50
  Card reader Realtek 1.0.0.14
  TOSHIBA 1.0.4 Wireless LAN indicator
  TOSHIBA Sleep 1.4.2.8 utility
  3.1.8 TOSHIBA face recognition
  TOSHIBA eco Utility 1.3.2.64
  TOSHIBA HDD/SSD Alert 3.1.64.8
  TOSHIBA PC Health Monitor 1.7.7.64
  ConfigFree 8.0.38
  TOSHIBA Web Camera Application V2.0.0.21
  TOSHIBA V4.00.7.01 VCR - HAS
  TOSHIBA resolution + plug-in for Windows Media Player 1.1.0
  TOSHIBA Disc Creator 2.1.0.9 for x 64
  TOSHIBA Network Device ID registry setting tool 3.0.32.4 - 16_wMSI
  TOSHIBA Media Controller 1.0.86.2
  TOSHIBA Media Controller plugin 1.0.6.1

  If you need assistance more let us know.

• OfficeJet Pro 6830: There is a problem with the printhead

  There is a problem with the print head.  Or can not find the print head

  This problem just started happening. Everything was ok after replacing the cartridges of printers with HP cartrighes for this printer, printed since the replacement of cartridges.  I followed the instructions given by your troubleshooting solutions.

  turned off and unplugged, removed and replace the cartridges back in, printed on a sheet of paper indicating that the print head was aligned, printed what he needed at the time and now does it again.  I repeated the above instructions and it just keeps saying the same thing.

  Open the link: www.hp.com/contacthp/
  Enter your product number or select Auto detection
  Scroll up to "still need help? Fill out the form to select your contact options.
  Scroll down and click on: contact HP options - click Get phone number
  A file number and phone number will be displayed.

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• problem with the installation of window package

  Impossible to install, i-tunes, quick time and I downloaded Security software. Error message indicates a problem with the windows package install. On Vista, this is a fairly new problem
  Thanks in advance
  Jack

  Hi Jack8053,

  Thank you for visiting Microsoft Answers.

  · The error message you get when you try to install a software, what exactly?

  · Remember to make changes on the computer before this problem?

  It seems to be that some of the files windows install is corrupt. I have a few steps that might help you to solve the problem:

  Method 1

  Make sure that the Windows Installer service is running.
  1 open run and type services.msc, and then press ENTER.

  2. in the services window, locate the Windows Installer service in the services list.
  3. check that the status is "started". If the condition column is empty,
  Right-click Windows Installer, and then select start.
  4. change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  Method 2

  Run a scan of the file system [SFC] checker on the computer that will replace missing or corrupt files.

  To do this, follow the steps below:

  1. click on the Start button.

  2. on the Start Menu, click all programs followed by accessories.

  3. in the menu accessories, right-click on command line option.

  4. in the drop-down menu that appears, click the "Run as Administrator" option.

  5. If you have the User Account Control (UAC) enabled, you will be asked permission before the opening of the command line. You simply press the button continue if you are the administrator or insert password etc.

  6. in the command prompt window, type: sfc/scannow then press ENTER.

  7. a message is displayed indicating that "the system scan will start.

  8. be patient because the analysis may take some time.

  9. If all the files need replace SFC will replace them. You may be asked to insert your Vista DVD for this process to continue.

  10. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.

  11. once the scan is finished, close the command prompt window, restart the computer and check.

  For more information, see the link below:

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista

  http://support.Microsoft.com/kb/936212

  Method 3
  1. If it does not help, try to uninstall Windows install using the Windows Installer Cleanup utility:

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/kb/290301

  2 restart the computer.

  3. download and install the latest version of Windows Installer by downloading from the link given below:

  Windows install 4.5 Redistributable

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  4. try to install the program and check that it works.

  Hope the helps of information. Please post back and we do know.
  Concerning
  Joel S
  Microsoft Answers Support Engineer.

• Removal of security icon to remove a mounted cd/dvd drive that can not be delete. also the problem with the apple driver.

  Vista Home premium

  64 bit

  HP pavilion dv4-1220us

  It happens when I went to open I tunes and he indicated a problem with the cd/dvd and then I noticed security remove the icon at the bottom of the screen, attended safe remove and it delete my CD-ROM drive mounted cd/dvd look no further and I notice this driver is part of apple who was a pilot of speed indicating this driver will remove your drive of cd/dvd rom IS NOT WORKING WITH some programs installed.  I contacted apple, we have deleted the driver and complete the process with the driver of the machine. Now, this does not take care of the security delete icon then tech apple tried to help and communicate with Microsoft or hp.

  RESTORE MY COMPUTER SEVERAL TIMES, THIS ICON IS STILL THERE.

  DOWN MY BIOS AND THE ICON IS STILL THERE.

  THIS SCANNER DRIVER AND THE ICON IS STILL THERE.

  Security delete icon States: remove TSST CORP CD/DVD TS-L633L ATA DEVICE READERS of CD-ROM/DVD-ROM if I hit remove it will remove my CD/DVD-ROM DRIVE.

  I went on my computer and click on my cd/dvd rom drive and went to properties and that's what I found below.

  1. FUJITSU MHZ2250BH G2 ATA HARD DRIVE: WENT INTO PROPERTIES TO DISPLAY DRIVERS, IT HAS A HPDSKLFT. SYS DID NOT SIGN THE OTHER TWO DRIVERS ARE THE SIGN. ENTERED DRIVERS FILE AND INSTALLED THE SIGN AND IT IS SHOWING NO SIGN, ALSO WITH HP ASSIST THIS HARD DRIVE IS DISPLAYED AS 0 FAILURE AND DISK.

  2 TSST CORP CD/DVD TS - L633L ATA DEVICE DVD/CD-ROM: ENTERED VIEW PROPERTIES PILOTS AND THIS ONE HAS THE DRIVER OF THE VEHICLE AND A DRIVER.

  At the moment I'd hide so I does not uninstall my cd/dvd drive.

  Do I need another hard drive?

  Is this something with the Bios?

  Apple has tried to help with this driver of train that I'm not sure that this problem is still with this gear or what?  This is the site about the problem to apple and the site of heavy plant driver.

  http://www.GearSoftware.com/support/drivers.php

  http://www.GearSoftware.com/wiki/index.php?title=CD/DVD_drives_disappear_after_installing_iTunes

  http://support.Apple.com/kb/TS2308

  http://www.GearSoftware.com/wiki/index.php?title=drivers:_Windows_ - _Updating, _etc, _64_bit_versions, _removing

  Hi Mamalasting,

  I'd say Hewlett-Packard to visit support website and check if they have the latest drivers for the DVD player.

  Reference:

  http://www.HP.com/#support

  Thank you, and in what concerns:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• My window 7 showing message "a problem with the NVIDIA Graphic driver", but I can't download the solution

  My Windows 7 PC at home keep crashing and I keep losting my screen when I played the game on the last 6 months.  After I restart my PC, it says that there was a screen.   I had since a few Update window update driver and try the NVIDIA drivers with no will.  There were a few times he were message indicating the "resolve a problem with the NVIDIA graphics driver" on the taskbar.  When I click on the message and try to download.  It gives me the message that "your computer was not able to download the solution at this time.  Make sure that your computer is connected to the internet, and then try to download again"that had happen all the time, and of course, I had access to the internet all the time!  I'm getting nowhere for solve this problem.  Can anyone help?  I want to know if there is something I need to know the video driver as usual outside the upgrade.

  PS I tried a lot of stuff, running the troubleshooter from the performance.  I had an i7 with plenty of RAM, running only a few program, hard disk error not... etc.  It seems related to the video driver. I update my window.

  Hello Lewie,

  Thanks for posting your query in Microsoft Community Forum.

  1. What is brand and model your computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  I understand that you lose your screen when you play a game. This happens usually if the installed graphics driver has corrupted or unstable. Therefore, I suggest trying the following methods and check if the problem persists.

  Method 1: Run the tool material and devices

  Try running the next fixit and check whether the problem is resolved.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: Update your graphics card

  1 open Device Manager by clicking the Start button, click Control Panel, click System and Security, and then, under System, click the Managerof peripheral . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. in the list of hardware categories, find the display adapters and select the device driver you want to update, and then double-click the device name.

  3. Click tab driver , click Update driver, and then follow the instructions. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  For more information, visit the below mentioned link:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you are not able to update the device driver via windows update, you can visit your computer or graphics card manufacturer (NVIDIA) Web site and download & install the latest driver. Or contact the manufacturer of your system to do.

  For reference, you can also consult the following Web page. Click on continue to this site Web (not recommended) if you are prompted for any error of certification.

  A problem of NVIDIA graphic driver

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Problems with the propertie recognized in WCS

  Hello

  I have a problem with the ACK propertie in the WCS. I check a logg entry in the logg with the receipt, within a few seconds/minutes/hours this alarm disappear, and then if this alarm appears again, this message show marked ACK.

  Should not the message again without significant acknowledgement? What is the problem?

  Thanks in advance

  Hello

  According to also which is indicated in the official guides, this seems to be the expected behavior:

  '' You acknowledge receipt of the alarm to prevent it from appearing in the alarm summary page. The alarm remains in WCS and you can search all the alarms that are paid using the alarm search. »

  http://www.Cisco.com/en/us/docs/wireless/WCS/7.0/Configuration/Guide/7_0event.html#wp1229996

  So, you can accuse reception that specific alarm once do not show on the alarm page, only for this event. If however the alarm goes off again, the new instance will appear and let you know that you already recognize a similar instance.

  Hope that clarifies the behavior,

  Fede

  --

  If this answers your question please mark the question as "answered" and write it down, so other users can easily find it.

• I think that there is a problem with the cache, Rom or bios

  everything changes every time I start windows, for example I must maximize the window workstation, every time I start the pc in my previous pc once I expanded the window and I closed the windows recognize my choice "maximise window" and the window opens always maximized... also in programs like photoshop the program changes the interface whenever I turned off the pc and open it

  Hi Marc,

  Write us with the following details so that we can better help you.

  ·          What changes do you see in the interface of Photoshop?

  There is no problem with the BIOS ROM or with the cache. I suggest you follow the steps below.

  (a) open a Windows Explorer, optimize it click on the arrow next to the button of the view on the toolbar, and then choose a display setting.

  (b) on the toolbar, click organize, and then click folder and Search options.

  (c) in the folder Options dialog box, click the view tab, click apply to folders, click Yesand then click OK.

  Write to us with the details asked. We will help you to come.

• Problem with the Polycom endpoint dial string via VCS

  Greetings,

  Currently I have an environment using a set of standalone Polycom endpoints (mixture of VSX/HDX units).  We have recently installed VCS - c / VCS-e / TMS and despite a few problems with the SIP registration on some of the older endpoints and management through TMS, all support works well.  The only remaining problem is when there are a number of business partners using the extensions in their chains of H.323 dialing that works very well for the Polycoms during the use not VCS - c as a guard in the numbering of the format #.  When you use this same dial string and endpoints are registered in VCS - c then the only thing it is indicated in the call history is a number of , which fails.

  I am aware that different manufacturers have historically managed extension dialing differently since ISDN only and has apparently been perpetuated until today.  However, it's a pretty critical need still at this stage and I am looking for input on chipboard VCS supports the use of extension component in the dial string (or did once the call is connected to a gateway is the host).  If so, is there a specific format for this connection string which can support both the end points of Polycom and VCS able to interpret correctly?  Does anyone have this working?

  Latest versions of software are on all components.

  Thank you in advance for any thoughts you may have!

  Hi Readamson,

  using the syntax of "device-IP-address ##extension" to compose a H323 device isn't a way standard of doing things, it is approach of Polycom extension numbering that VCS does not understand without changing the alias of a '[email protected] / * /' format.

  Assuming that the address-IP-receives the message SETUP H225 VCS-E, he does the SETUP message? Is there a way that you can configure this device to end to remove the [email protected]/ * /' part of the route the call to the post and the dialed number?

  Visit this link:

  https://supportforums.Cisco.com/thread/2129307

  Best regards, Ahmad