Windows 7 MMC Exchange 2007 up-to-date

Similar Questions

• Cluster of P2V existing Windows 2003 two nodes exchange 2007

  Hello

  I want to know how I can create a cluster of the P2v of my production windows node cluster on a host two unique esx4i. It is only for purposes of laboratory and test. The reason why I've done a P2v is I want to imitate my production environment, and as production data.

  I've done a p2v of my node Exchange 2007 cluster two production Windows 2003 64-bit.  How can I reconfigure disks (quorum, data) for the cluster?

  I've seen a lot of e of documents telling me to remove the discs and re create, but I want to keep the data.

  I would like to know if someone has done with success the P2v cluster.

  Please notify.

  I understand you want to keep the data - this guide will give you necessary for nodes in vm configurations and storage relavent - if you want to keep the two nodes in the cluster on separate from ESX boxes, then you will need to maintain a quorum and the shared data on the physical SAN LUNS and allows to connect to storage RDM - if they all exist on the same ESX Server I shute evrything down - P@V primary node with the disk data and shared quorum, then P2V system disk of secondary nodes - in both cases follow the configurations described in the guides and you should be good to go-

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Exception of Microsoft Exchange 2007 owa data storage

  Hello

  We have the MS Exchange 2007 server. I have a problem with the owa service and especially with a user account. From outlook, I can see and navigate through all folders. OWA when trying to navigate through some files I get the following exception: Exception type: Microsoft.Exchange.Data.Storage.CorruptedDataException Exception message: the configuration object data is corrupted. Field = UserConfigurationType.

  Call stack: Microsoft.Exchange.Data.Storage.UserConfiguration.BuildConfigurationFromQueryItem (file, file, Object [] line) Microsoft.Exchange.Data.Storage.UserConfiguration.GetIgnoringCache(UserConfigurationManager manager, Folder folder, String configurationName, UserConfigurationTypes freefetchType) Microsoft.Exchange.Clients.Owa.Core.UserConfigurationUtilities.GetFolderConfiguration (String configurationName, userContext, StoreId folderId UserContext) Microsoft.Exchange.Clients.Owa.Basic.ListViewPage.OnLoad(EventArgs e) Microsoft.Exchange.Clients.Owa.Basic.MessageView.OnLoad(EventArgs e) System.Web.UI.Control.LoadRecursive System.Web.UI.Page.ProcessRequestMain (Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint))

  Any help will be appreciated. Thanks in advance. Enrique

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• I lookat to Forefront 2010, I am running Windows server 2003 with Exchange 2007. I want to just make sure I have the right product.

  I am running Windows server 2003 with Exchange 2007.  I want to just make sure I have the right product.

  Please repost your request in one of the appropriate Forums for Windows Server.  Thank you!

• Exchange 2007 on windows server 2008

  I work in the company, there is windows server 2008 with domain name, dns, dhcp is configured. now I want to install exchange 2007 in another windows 2008 Server, so please expose me to properly install and configuration...

  Hi Alavi,

  For more specialist on this question help, post your request here

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• Exchange 2007 ver quien manda a message

  En Resumen de Bueno, we have received a letter from a person than our indicates that the slaves hemos a correo con nuestro dominio.

  Necesito UN saber if ese mail to mando internamente hacía fuera o's was the suplantacion of identidad desde fuera.

  ES decir newspaper puedo leer en Exchange 2007 para ver el trafico ese correo is desde donde is mando hacía than direccion is mando y date y hora.

  Gracias.

  Hi FEGUME,

  Unfortunately, the community of Windows is able to provide support in English. The following URL will help you to receive support appropriate for your location information. Open the link and select your region from the drop-down list, and then click the arrow to continue.

  http://support.Microsoft.com/common/international.aspx

• Internal error 4238 blackBerry Smartphones, exchange 2007

  BlackBerry 8320, Outlook 2007, Windows XP, Exchange 2007 and Blackberry Desktop Manager 5.0.1.28, extreme frustration.

  Try to get the Exchange calendar to sync to the blackberry.  Outlook is configured to deliver mail to the mailbox on the server.  AFAIK synch is set up correctly, synchronization begins, ends with the error message "failed to get an Outlook or Exchange.  Lack of network access to the server Exchange can cause this problem ' Journal lists 'Read '' ' to the list of items, so connection to the server at a certain level is assumed, but ends with:

  >>

  Total of the second system entries: 1063

  Used for the translation field mapping:
  Feature of Microsoft Outlook
  -Title Description
  Start date - Date of start
  Start - Start time
  End date - End Date
  End time - end time
  Alarm Date - Date alarm
  Time alarm - the alarm time
  Reminder flag Set - alarm indicator
  Body - Notes
  Show Time as - free busy
  -Place
  Private - private
  Participants in the meeting - participants

  #4238 internal error.
  Cancelled translation!

  >>

  It is one of the only two blackberrys in the Agency (and likely to stay at this rate), so BES installation is not an option.  Outlook works fine, we deleted then recreated the Outlook profile and the sync folder in the folder settings for the application - no luck.

  Is there something in particular that must be set on the server Exchange to enable the Blackberry communicate with her?  The specific services that should be running?  The Blackberry is replacing a Nokia that synchronized without problems on the same Exchange Server.

  Thanks for your responses and suggestions.

  Hi and welcome to the Forums!

  Here are a few KB dealing with this message:

  • KB11951 Unable to get data from a Microsoft Outlook or Microsoft Exchange Record. Lack of access to the network for MS Exchange Server can cause this problem.
  • KB01172 Error 'Unable to get a folder Outlook or Microsoft Exchange' when syncing with BlackBerry Desktop Manager
  • KB03339 'Unable to get data from an Outlook or Microsoft Exchange' when syncing with Microsoft Outlook calendar
  • KB16222 Cannot synchronize smart phone BlackBerry using Microsoft Outlook 2000

  jgallott wrote:

  Is there something in particular that must be set on the server Exchange to enable the Blackberry communicate with her?  The specific services that should be running?  The Blackberry is replacing a Nokia that synchronized without problems on the same Exchange Server.

  Just a small clarification here - there is never any direct communication between a BB and the Exchange Server. All require ducts (BIS/OWA, BES, Desktop Redirector).

  Good luck and let us know!

• Exchange 2007 Cluster CSC - P2V

  We are currently running two physical servers to Exchange 2007 in a SCC cluster.  The Exchange mailbox DB are housed on a LUN in a SAN EMC.  Currently, the two physical servers have access to the LUN, but only the active node of SCC will go up the disks.

  We would like to P2V servers on our farm in VMWare (ESX and vSphere 4).  The SCC cluster has too many pieces attached to it (certificates, Outlook clients connect on behalf of the cluster, etc.) so we don't want to set up a new server and then migrate the data.  Are there special aspects we need to know?  Most of the documentation I've found is CCR and SCC No.

  In the past, we ran into issues when more than WIndows servers had access to a SAN logical unit number.  In fact, this caused the corruption of our Exchange 2007 databases when firstly, we migrated from Exchange 2003 to 2007.  We will encounter this problem even if our ESX farm all have access to this LUN?  This is necessary because we also run vMotion.

  Thank you.

  Yes, the new virtual machine will be the 3rd member of cluster, not the server of the mailbox 3rd (just to be clear).  In order for this virtual machine be eligible, you need to make data visible LUNS per ESX host.  Once added to the cluster, you will be able to move the EVS (your mailbox server resources) for the virtual machine (3rd member of the cluster).  Note, all in are not normally the case, I've seen a situation when the VM could not meet the disks shared online.  To fix this I had to turn off the physical host computers having locks on shared disks.  Once I turned off the physical nodes I could put the Exchange virtual server online and then put on the physical nodes and freely moving resources between nodes.

  If you look at the guide I linked in the previous post, you will see the section that describes the parameters to create a cluster of physical to virtual.  Once the virtual is online and you have confirmed that the Exchange virtual server can freely migrate from the physical to the virtual nodes you can expel one of the physical nodes.  You can then set up a second virtual machine and add it to the cluster.  Once you have verified that the Exchange virtual server can migrate freely between the two virtual nodes you can then remove the remaining physical node and you end up with a virtual two-node cluster.  Also, note that you cannot have two nodes in a cluster failover windows running on vSphere.

  I hope this helps.

  -alex

• Exchange 2007, P2V or migrate the mailboxes?

  We have our Exchange 2007 running on two servers environment. A server is to access to the client and one for the letters/hub transport boxes. Months ago we did a P2V on the client access server and there work very well since. Next week we want to virtualize our box at the letters/hub transport server. I got two options:

  1. perform a P2V with VMWare Converter making a cold conversion

  2 set up a new server instance of the letters/hub Exchange 2007 under VMWare boxes and then migrate the mailboxes. It would involve a new installation of Windows Server 2003 Enterprise (64-bit) and a new installation of Exchange 2007 under VMWare and then using Microsoft tools to migrate the mailboxes.

  Any thoughts on how we should go?

  We run what ESX 3.5 fully patched. Our current box the letters/hub Exchange Server works on a blade in my IBM BladeCenter. We present this server with two LUNS of my Netapp FAS3020, one for the mail store and one for the log files. The disks we use currently in the Netapp are SATA. Monday we're going to bring online a new tray of fiber channel disk, and this will be where the data for our virtualized Exchange servers store will reside. In the end, it would be easier if the virtualized Exchange Server had the same IP address and the host name, otherwise I have some additional work to do with my ISP and my Barracuda Spam firewall. If we move to the second track, I don't know if this part will be delicate.

  We have about 600 mailboxes and our database of mailboxes is about 90 GB in size

  Migrate the mailboxes - fully phased in with little or no risk and roll back is a snap.

• Installation of SSL in Exchange 2007 Powershell

  Hello

  An SSL certificate for a client has expired recently and we have purchased/installed a new to replace it.

  "IIS, SMTP, IMAP & POP" services are currently assigned to the new certificate however when you try to connect their OWA site, he always picks up the details of the cert has expired.

  I went as far as remove the certificate expired completely and once more, connecting to the OWA, old details again site.

  Completely lost now and would appreciate a lot of suggestions.

  Server operating system: Windows SBS 2008

  Exchange 2007

  IIS 6.0

  Thanks for any help.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Exchange 2007 SBS 2008 farm 25 port transport service

  Hello guys,.

  I have the following problem;

  -sbs 2008

  -exchange 2007

  have random closing port 25.

  Restart the result in a code exchange transport service could not stop the service.

  Restart the entire server has solved the problem for abouth 1 day.

  Things I've done,

  -Windows Update Server

  -Exchange of the sp1 update to sp2 to sp3 ROLLUP 17

  -change the opening of transport service for instead of the network administrator account.

  -drive c has 18 GB of free space.

  -imposed d player has 200 GB of free space in the database.

  -restart the transport service result in not able to shut down the service.

  -telnet external to the server on port 25, especially when there is the problem have a black screen. Since today have not yet opening the port.

  I don't know how to solve this problem at this time.

  Restarting daily, this isn't a solution.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to put a lien on deleted e-mail in exchange 2007?

  I need to put a 60-day retention on all messages for all users in Exchange 2007

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

• Exchange 2007 SP3 increase in message size does not work why?

  I have a windows server 2008R2 with Exchange 2007 SP3, currently the maximum to send and receive message size is 30 MB. My MD needs to send an email which is 60 MB.

  I went through and changed all the parameters in which I expect to do. If I run best practices, it signals that the Send connectors and the receiver are high at 60 MB. Fine, I said.

  I open Microsoft Outlook 2007 and try to attach several files to 5 MB per element. Outlook has that attachments are great when I get to 29 MB.

  This is only a temporary job, so not worried, but can, my concern is what's wrong.

  We had Exchange 2007 running on windows 2008R2 who say it cannot be done while we had a server crash. I had to transfer exchange on a temp server. I've migrated on the main server which is brand new but this time, I installed Excahnge 2007SP3. I don't know if this migration has nothing to do with it.

  Any help would be great

  Concerning

  Garv :)

  Hello

  You can find the Server forums on TechNet support, please create a new post at the following link:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• Exchange 2007 Enterprise Time Stamp problem

  Dear Sir;

  I have an Exchange 2007 Enterprise - Windows 2008 64 x, the problem is: email time stamp is + 1 hour real time. The clock and the time zone time to Exchange server, DC and customer is right. What I can do.

  best regards;

  Muhammad elmechry bedde achouri

  Hi Muhammad,

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the following forum.

  http://social.technet.Microsoft.com/forums/en-us/categories/

  I hope this helps.

• Windows 7 and Outlook 2007, Microsoft Word won't open

  Windows 7 and Outlook 2007 - Microsoft Word attachments are not open.  Word opens but not the file.  Excel works fine.  Sometimes just Word opens and says not responding do not.  If I erase the data word file in via regedit it solves the problem. Also, whenever I open Word I get the question if I want Word to make changes to my computer.  In addition, I can't open Word files by double-clicking.  I have to open Word first.

  Techie Microsoft asked me to change a setting of compatibility on the winword exe file and it fixed the problem immediately.