Problem with the Knights of the old Republic II sith lords.
Original title: Conserning sith lords Knights of the old Republic II
played the game on windows 7 and everything works fine. but ive just came to onderon and ive walked to the place merchents and it get 3 quarters of the way to load, then the window closes and says that it has stopped working. I don't see the reason of that the disc is clean and has no scratches and I had no problems like that before.
I can't continue with my game, because it auto saved on the loading screen, so I can not continue with my game.
If you could help I would be very gratefull.
Knights of the Old Republic II, Sith lords and Star wars are not compatible with Windows 7, you'll have questions by playing. However, you can try to run the game in Vista compatibility mode and see if that helps
Vista compatibility mode, follow there steps mentioned below:
(a) run the installer in compatibility mode:
(b) make a right click the icon of the file installation.
(c) click on Properties, go to compatibility.
(d) select the compatibility mode for Windows vista.
(e) click OK .
(f) run the installer.
If the steps above do not help, you can contact the manufacturer of the game for further assistance.
Tags: Windows
Similar Questions
-
Problems with the old original iPad
Need help.
I took our old original iPad and tried to change the user of itunes. I have it wiped, reset all the settings and then made a mistake and tried to the very old version IOS 4.02 update. I have it plugged into my computer and it launched iTunes, then I tried to update - no luck then I tried to restore and update - no luck.
Now I can not use even the old iPad to surf the web.
All I get is the graphics "connect to iTunes" on the screen.
I can not get access to anything else on the iPad.
Need suggestions.
Your iPad is in recovery mode: https://support.apple.com/en-us/HT201263
What happens when you try to restore with iTunes? -AJ
-
I have display problems with a game that I just downloaded. The game is Annihlation Total; the game does not appear correctly. He works for a few seconds, all the graphics turn Rainbow and I can't seem to stop. Tried to run in compatibility mode; did not work. I hope there is a solution because this is one of my favorite games...
Hi razorbladeapple,
(a) what operating system do you have? And also to indicate the version?There is currently no information on the compatibility of the game with Windows 7.You can also try to check compatibility here: http://www.microsoft.com/windows/compatibility/windows-7/en-us/Default.aspx(b) is the display horizontal bar change only whem you play the game?(c) you have installed the updated display drivers?Some devices have drivers you need to install yourself. If you download a driver that is not self-installable, follow these steps:
You must be logged on as administrator to perform these steps.For more information, see: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
Update drivers: recommended links
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-linksContact GT Interactive and check what they have to say about the compatibility of the game with Windows 7 because they are the best people to offer support.
Aziz Nadeem - Microsoft Support -
Problems with the old version of Acrobat?
I don't know if this is the right place to post this, so feel free to another place direct me.
I created an Access application that uses a database as a source to create emails with attached custom PDF Forms. Everything works fine on my PC but when I tried to apply it on the target machine, everything turned to custard. When I try to run I get the message "no Acrobat serial number valid. found Acrobat stops now. »
I see that I have all the correct references. The only difference between the two environments is home, I have Acrobat 9 and the target has Acrobat 7. I looked on the web, but none of the sites I've found seems to fit my situation.
I guess Acrobat 7 is too old, but go to the DC Acrobat subscription is not really an option.
Can anyone offer suggestions/ideas?
Thanks for the replies. I've got it sorted. After watching a little more closely and did a little more research, I discovered that the issue has been entirely with Acrobat 7. This situation seems to occur when you install a later version of Acrobat (same drive). It's more complex than that, but it's essential. He never appeared in the normal course of events because these days, they (the club I belong to and made the application for) use Reader to read the files PDF and CutePDF to print to PDF. All this turned to custard when I tried to call the API of Acrobat. I had to uninstall Acrobat 7 and try to reinstall it from the original CS2 diskettes. Because it is so old the activation server no longer. However Adobe gives links to versions that can be installed without activation until you have a valid serial number. Good I thought. Downloaded and installed, but he would not accept the serial number of the CS2 DVD. Oh! I managed to find a serial number online which has been accepted, so now it all workers.
What a carry-on! Fairly typical of how Adobe works these days, unfortunately. -
Problems with the old ID on FROM Adobe.
I have an old that permission that I can't remove, because the E-mail address is more wonderful and the password appears to be wrong. This all happened after migration FROM Adobe from an older Mac to a new.
I have the same problem and have tried to use the help of adobe without great success. I don/t think anyone the answers to questions on this forum?
-
Reclassification of CS3 to CS5. Problems with the old file.
I design a monthly publication, which is always started from an InDesign template. This template has been created in CS3 and Incopy all links have been created using CS3 as well.
We have upgraded to CS5 today and now we are unable to connect to these stories. Here is the error message:
"This story must be converted to the format"InCopy Document"in order to change it."
Should I dissociate and create a new InCopy Documents or is there a quick way to solve this problem?
Thank you!
I don't know, I think it's pretty fast.
Open the file in CS3.
Select all the stories in the Panel assignments (shift-click to get them all). -10 seconds
Click the icon to break the (trash) link at the bottom of the Panel. -1 second
Close the file in CS3, do a save as w/a different name if you wish. -5 seconds
Open the CS3 to CS5. Save or save as. -20-30 seconds (depending on the size)
(Personally, at this stage, even if I was not using InCopy, I would still be exporting to IDML and then reopen it in ID CS5, by saving the document without title with another name, since you are skipping a few versions.) But it is not necessary. If you do, add another minute).
Choose Edition > InCopy > export all stories, 10-20 seconds, depending on how much it must export.
The end. It is 2 minutes, Yes?
AM
-
Unable to play 'Star Wars Knights of the Old Republic 2' on Windows 7 PC
Help, I really want to play this game!
My game, Star Wars Knights of the old Republic 2, Sith Lords, got a problem on my Windows 7 computer. I saw the resolution of compatibility issues, but nothing works. The game will start and I can create a character, but when it comes time to play, I get a Windows error message and have to stop the program. What can I do? I REALLY want to play this game!
Hello
· What version of the Windows operating system do you use?
See the link below:
· Is it a system of exploitation 32 or 64 Bit?
Check the log for more information on the crash of the Application an observer of events.
To open Event Viewer on Windows 7 computer and for more information, see the links below.
http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
http://Windows.Microsoft.com/en-in/Windows7/what-information-appears-in-event-logs-Event-Viewer
Please provide us with additional information so that we can help you solve the problem on your computer.
-
I have a problem with the new version of Photoshop CC 2015
Hello
I just installed the new version of Photoshop CC 2015. However I have proplem with this version. If I optimize the program, I will not be able to use all the tools, because everything is great, I don't have the problem with the old version.
I hope for a solution...
Go to Preferences > Interface > user interface scaling and see if 200% is checked.
If so, uncheck the box and see if that fixes the problem.
-
When I run the game, it loads for the first logo of lucas arts, but then does not load all still and go back to windows. The games seems to still be running in the toolbar, but it's just a black screen? Any ideas? I it is game to work once before, but I don't remember any fix specific on how I did it. See you soon
Hey, subtitled.
This seems to be a compatibility issue.
Try changing the compatibility settings.
You can choose to run the program compatibility problems for the same purpose.
To run the troubleshooting program compatibility Troubleshooter
1. open the resolution of the problems of compatibility of programs by clicking the Start button picture of the Start button, click Control Panel. In the search box, type troubleshooting, and then click Troubleshooting. Under programs, click on run programs for previous versions of Windows.
2. follow the instructions in the troubleshooting.
Reference:
Make older programs in this version of Windows
http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-WindowsTechnical support (self-help) - Star Wars: Knights of the Old Republic
http://swforums.bioware.com/viewtopic.html?topic=322757&Forum=80
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
OK, I have an Acer (aspire 6939) with windows 7 ultimate 32 bit and a mobile intel (r) 4 searies express chipset family all my drivers are fully updated, I tried to ask compability mode all windows for win 98, me 2000 xp sp1 and 2 and vista 1 and 2 I've updated the game patched all made troubleshooting and landmarks of there web site and still I is via the menu main starts the game up and I get this program does not work properly! Please help, I am at my wits end resources and Im ready to go mac because it gets rediculas! I was a PC man all my life I hate mac but I paid a lot of money for this game!
Thank you for taking the time to watch it!Hello
See the link below and look for the solution given by game developers on their forum Web site. He has worked for many users on Windows 7.
http://www.lucasforums.com/showthread.php?t=194296
Solutions to common problems faced by players, see:
Technical support (self-help) - Star Wars: Knights of the Old Republic
http://swforums.bioware.com/viewtopic.html?topic=322757&Forum=80
Important note: this response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
How to get to Star Wars: Knights of the Old Republic to work on Windows 7?
I have a laptop with the following configuration:
Processor: Intel Pentium Dual CPU T2390 1.86 GHz
Installed memory (RAM): 2.00 GB
System type: 32-bit operating system
Graphics card: Intel 965 Express Chipset Family
Previously, I had Windows Vista Ultimate Edition on this laptop and have recently upgraded to Windows 7 Ultimate. I got a copy of Star Wars: Knights of the Old Republic, which I ran on my PC with Windows XP (Service Pack 2) and I decided to install the same on my current laptop that has Windows 7 now. However, when you successfully install it in compatibility mode for Windows XP (Service Pack 2), I run the application too in the same compatibility mode. But it gives me the following message is displayed:
"Star Wars: Knights of the Old Republic has stopped working".
Signature of the problem:
Problem event name: BEX
Application name: swkotor.exe
Application version: 1.0.0.0
Application timestamp: 00000000
Fault Module name: swkotor.exe
Fault Module Version: 1.0.0.0
Fault Module Timestamp: 00000000
Exception offset: 00000110
Exception code: c0000005
Exception data: 00000008
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information 1: be9b
More information 2: be9bf493184e8a1cc6dbc11c84c53984
3 more information: 9e35
Additional information 4: 9e353e53e9ec76750b5c1f800beee128Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
C:\Windows\system32\en-US\erofflps.txt ".I also checked my graphics card drivers: they are updated.
I would be grateful if you could shed some light on this error.
I talked to your answers on the similar problem. However, in my case I don't reach even the main menu of the game.
Please note that I do not install this game on my laptop with Windows Vista Ultimate.
Thank you very much in anticipation
syb1987
Hello syb1987,
As Meghmala mentioned, the game is listed as being fully compatible, however:
(1) you can try to run the game in different compatibility modes to determine is that they work.
(2) have you installed XP Mode? Try maybe to install XP Mode and install the game in the virtual environment.
(3) you can find others on the forums for this game in particular who were lucky in getting the game to properly install and run better.
Hope this heps
Chris.H
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Star Wars Knights of the old Republic 2 keep crash error "stoppage of work".
I recently downloaded a copy of Star Wars Knights of the old Republic 2 and have had any other questions. The first issues was a message that kept telling me that I had the wrong disc inserted any disc I've used. I have not downloaded any crack disk and got that the fixed part. Now, the game keeps the work stoppage and must be closed. Sometimes she does on the logos, the main menu or I even made with regard to creating a character then right after that the words are made to scroll it crashes. This has been extremely frustrating and I would appreciate any help with this. I use windows 8, have 4 GB of RAM ddr3 and Intel HD graphics.
Hi Scott,.
If you are unable to connect more, try to perform a system restore and check if this solves the problem. Follow the steps below to restore the computer to a point before this issue.
- When you reach the login screen, click the power button in the lower left corner.
- Hold down the SHIFT key and then click on the option restart together to start the computer in the early startup options for Windows 8.
- Troubleshooting , click on advance options.
- Click on System Restore. Follow the instructions on the screen to do.
Please keep us informed.
-
Star wars Knights of the old Republic crashing on windows xp
When I open Star wars Knights of the old Republic of his fine, but after I create a character and press play it freezes when I'm just able to see the droid.im using a toshiba driver and I don't think it's the latter. Help me please.
What toshiba do you have?
Download the latest drivers here especially if you don't feel that later.
http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download
you have reinstalled the game? If it's too much to do.
MCP. MCDST. LVL 80
-
Satellite C50-A-1 - game "Star Wars: the old Republic ' is lagging
Hello
I recently bought a Satellite C series. (C50-A-1 more specficly).
Problem is when I downloaded star wars: the old Republic, the game lags badly.The graphics in the game are set in the lowest possible to minimize lags and yet I still get them. Here's some info of dxdiag, although they should be known for this type of laptop, I suppose that:
OS: 64-bit windows 8.1
Processor: 2.13 GHz (2 CPUs) (Intel, Celeron)
memory: 4096 MB
DirectX 11Please help with it as soon as possible thank you
Have you already checked the hardware requirements to play this game smoothly?
C50-A-1 satellite was equipped with an internal Intel HD graphics card.
This GPU is part of the Intel CPU and to be honest, this isn t graphics card designed for purposes of games.To play games smoothly, you need a laptop nVIdia or ATI graphics cards.
-
Getting kicked to the Office of games like Star Wars The Old Republic...
So I have an app I think which is kick off games... Well I play only 2, Star Wars: The Old Republic and Battlefield 3. When I'm playing SWTOR, he kick me on the desk. Let me be clear though, it crashes, because I can get back in the game with Alt + Tab or by clicking on the icon. Now, the only thing I installed was Ninite. For those who don't know, that ninite is an open application source that will update all the programs selected for you with these programs, they are ones I asked to put up-to-date. Firefox, Chrome, Silverlight, Air, Java, Java x 64, Shockwave, uTorrent, 7-Zip, steam, Auslogics, Skydrive, VLC, Spotify, Google Drive, Dropbox, Evernote, iTunes, .NET, Google Earth, Malwarebyte s, Ad-Aware and Spybot 2.
I made sure that I turned off all auto scan on their part, but I'm still getting kicked on the desk during playback of SWTOR. When I play Battlefield 3, it's as if he's trying to throw out me, but he goes out only for a second and then returns to the game. It's REALLY annoying especially when SWTOR reading, because the game is so huge that even my computer rather fast takes a few seconds of rear loading. It's do or die during playback of PvP in SWTOR and something like that means you're going to die, if you play in PvP.
I don't know what else it could be, because these are programs (actually Ninite) was installed before what is happening. I actually had this problem before with SWTOR, but this happened only from time to time, and by that I mean maybe once a week so no biggie. Now, this happens on every 30 minutes or more. I'm just guessing.
If I knew the offending program, I either disable or uninstall. I've looked in Task Manager and can not find one that is, because TM it does not show as a running application. That said, I do not know there is a process running for it, but I don't know what it is. It's not like I can look in the newspapers because it is not an error. Someone has ideas how to identify the offending program?
BTW, I went into MSCONFIG and disabled everything except essential programs like Antivirus support, keyboard and mouse etc. I don't even have Ad-Aware or Spybot from and these services are set to manual, but it seems logical that he is one of them.
TL; DR: I get kicked to the desktop while playing SWTOR and cannot know which program is the cause.
Thanks in advance!
Tech Support Guy System Info Utility version 1.0.0.2
OS version: Microsoft Windows 7 Home Premium, Service Pack 1, 64-bit
Processor: Intel Core i5 - 3570K CPU @ 3.40 GHz, Intel64 family 6 model 9 Stepping 58
Number of processors: 4
RAM: Mb 16337
Graphics card: NVIDIA GeForce GTX 670,-2048 MB
Hard disks: C: Total - Mo 476937, Free - 28699 MB; Total E: - Mo 953866, Free - 12541 MB;
Motherboard: MSI Z77A-G45 (MS-7752)
Antivirus: Norton Internet Security, updated and activatedThanks, yes I did. I found it was my antivirus. Somehow, it became corrupted and I think he tried to update literally all the time. For some reason, it only affected Battlefield 3 and 4 and The Old Republic. Norton Internet Security is 2013. I have always used Norton, but I now have NIS 2014.
Norton was originally the best and then he got very swollen from 2005 to 2012 all about, but they are now very good again and one of the best. He now has a very small footprint and it uses very few resources and it is excellent protection. I guess BitDefender is THE best right now, but it is also a big memory eater. In any case, I think it was just a bug they set now.
Maybe you are looking for
-
12 Firefox is very slow to load pages and if two tabs are open, it lag.
12 Firefox is very slow to load pages and if two tabs are open, it lag. I've tried everything (e.g. virus, Defrag, I created a new profile in "run", etc.). I had my router/line checked everything etc and after 2 weeks of cleaning/testing etc its all
-
My new tab: + or Ctrl + T doesn't work anymore. How should I do?
Perform the + tab at the top right in the browser or by using the ctl & T keys or using new tab in the file Drop Down Menu no longer works. Any ideas?
-
Update CPU is possible on Portege 2010
Hi, I wonder if it is possible to upgrade the processor on my Portege 2010, I work as a pc technician so I have no problem to do the job.If so can what models I use? Thank you
-
Problems with music (stop) playing and attachment
Guys, bought this Milestone 2 (froyo 2.2) some weeks to the Brazil. Great device, but consumes a lot of battery and got two major issues so far: (1) no endearing not work (using the local carrier Vivo or TIM) - after having included ', dun' with 'def
-
Printing without the duplex printing accessory attached
Hello Is it possible to remove printing accessory duplex (thing of type cartridge at the back) and still be able to print front? I tried to disable the option to double-sided printing and print without the accessory, but it did not work. By checking