problem with the layer target/trigger

Similar Questions

• Elements 9 problems with the layer styles

  Hi, I searched the Forum but still not managed to install my layer styles in item 9.

  The asl files are currently in c/program files 86/adobe/elements9/presets/styles, but they may not appear when I launch the editor.  I even tried graphix add o matic nothing helps.  If anyone can tell me where I'm wrong, I would be really grateful.  I am running windows 7 on pc

  Install the styles in the shadow folder:

  "C:\ProgramData\Adobe\Photoshop Elements\9.0\Photo Creations\layer styles"

  Then delete this hidden file:

  "C:\ProgramData\Adobe\Photoshop Elements\9.0\Locale\en_us\MediaDatabase.db3".

  Start PES and wait while it automatically rebuilds this database file.

  You need to temporarily change your folder options to enable the display of hidden files.

  Ken

• Problems with the Display Mode target on end 2009 27 "iMac

  Used late 2009 iMac 27 "in the view target in conjunction with a Dell XPS tower with i7 processor, Windows 7 and the best graphics card I could afford at the time connected by HDMI to mini display port cable.  Worked well for years.  Set aside Dell for a few months and the update of the iMac to El Capitan OS 10.11.3.  Recently tried old setup with same Dell PC and was able to move from Mac to PC, but the PC screen resolution was at the lowest setting. I got an error message when enabling/disabling to PC who said there was a problem with the port causing mini display of the system back to the lowest resolution. Impossible to reset at a higher resolution.

  I tested the Dell PC on another monitor, and it works very well at higher resolution (2560 X 1440). Now, when I reconnected it to the iMac (which works fine), the screen becomes black.

  Is it possible that the operating system upgraded (El Capitan) is not compatible with the targets using mini display port Display Mode?  Any ideas?

  Use your iMac as a display with the target - Apple Support Display Mode , also consider having a bad cable or connection. Does not hurt to try different cables, they can and will the bad!

• z index / layer of problems with the new YouTube widget!

  Hello!

  I am facing a problem with the new 'youtube' of social media widget. I currently have two layers in my projects. This is a project for which the menu scrolls initially and then sticks to the top of scrolling parallax. By continuing to scroll, the embedded YouTube video widget does not scroll under the menu as it should but scrolls through the menu. It's strange, as the YouTube widget was placed on level 1 and the menu is at level 2. Shouldn't the menu then always be on top? Only the new widget is not properly defined index-z?

  You can check my web project (and look at the code) here: http://www.firstlight.at

  Any help is greatly appreciated!

  I managed to solve the problem, and I believe this to certainly be a bug in Muse...

  In order to avoid widgets Youtube iframed swim on top of all the other div tags, I had to change the code, add wmode = "transparent" and wmode = "Opaque" to the class of the iframe. This works if you replace all the other parameters behind the CBC "&" by "& amp"tag.

  Here's the original code generated by Muse. This could not prevent my "2nd layer" slip below "Layer 1".

  Makes the following changes to the code, forced the Youtube widget below all other div again (I pinned all changes to "BOLD", so you can see the changes easily):

  Ensure that you do not miss the following change: you need to change all of the vipers '&' to '& amp' this procedure will not work!

  After the new version, I'm sure the Adobe team is working hard to bust of bug last version. But I hope that we will be dismantled soon, otherwise users using the youtube widget will have to recode output Muse whenever we make a change and it is exactly what is the Muse striving to prevent (; After all, in Dreamweaver, you can hardcode the change and he would stick!

  I hope that it will be useful to someone!

• Problem with the levels in PSE7 adjustment layer

  Hello

  I have a problem with the levels adjustment layer in PSE 7.0. I made this photo that shows exactly as I want it in PSD format, but when I save it in JPG format all adjustment layers are lost. I tried to get the same result by using simple Enhance > > adjustments > > levels, but I cannot get the same result with the same settings as with the adjustment layer.

  How can I solve this?

  I saw in a tutorial that might help add a new layer above the layer of setting and then merge visible layers, but it does not work either.

  I hope someone can help me if I can complete the picture.

  It seems that the problem is that your image size is big enough in comparison to the size of your available screen and you make your settings at roughly 18% view.

  Photoshop elements uses interpolation to show the images on the screen, so you can't really see exactly the result unless you view an image at 100% display (actual pixels)

  If you try to do the steps from the beginning with your image at 100% view, does make a difference?

  (Double-click on the Zoom tool in the Toolbox for 100% view (actual pixels))

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• Problems with adjustment layer masks

  I have serious problems with adjustment layer masks. I have converted a photo black and white usiing one adjustment layer and trying to return to colored eyes. My form tool is selected, the color black is my first plan and target my layer mask. Coloring on the contour of the eyes a brownish/sepia-like color is revealed instead of blue (the color of the eyes). When I on the skin a reddish colour. In this case on THREE platforms... PSE6 CS3 AND CS5.5.

  I have reset my tools. Close the program. Uninstalled and reinstalled twice (PSE6 and CS3). And you have installed a trial version and reset preferences in CS5.5 (just to see if I could overcome my problem). I also reset the default preferences in CS5.5.

  Recently, I uninstalled a trial version of PSE10 (a week ago give or take and I think that I have chosen to remove preferences... do not know well).

  OS: Vista

  Browser: Chrome

  Thanks in advance for your help.

  Katherine

  Yes, I figured that the surrounding grayish area would give the impression that the color of the skin is too orange/high heat, and without external tone, the eye color looks different.

  Katherine, take a piece of paper, make a big hole like brush strokes and place it on the corrected image. This is not the colors are the same as on the image corrected, now? (Well, there should be a gray piece of paper to get exactly the same result)

  It's an optical illusion, like this: http://capslove.wordpress.com/2009/11/20/optical-illusion/ where the eyes of the same color green or cyan according to its surrounding areas. Your mind compensates for the colors and the tricks you into believing that they are different in picture one / two, skin color lighter and less saturated than in your second picture image.

  Knowing this, you can use another adjustment layer, to drive the color where you want (to the soft blue brighter, more saturated) or skin made down the color that appears too bright.

  If the other members of the forum are not paid in graphic design and the influence of surrounding the optical tricks colors/classic, it doesn't surprise me that they are consistent with the description you give, especially if you do ask them 'the skin looks too orange.

  This is why it is recommended to have a photo studio (or the room in what you use Photoshop) with gray walls, why Photoshop interface is neutral blue-grey and not bright pink, etc.

  (If you work on a Pc, select a black theme without transparency for Vista/7, or on a mac, select the choice of interface of graphite, as it could also mislead you.)

  Some use a grey full desktop picture.

  Thanks for the props, guys!

• Problem with the number of lines in the channel

  Dear community LabView,

  I'm relatively new to labview and I came across a problem that (I assume) can easily be resolved with your help.

  I need to create a digital signal to trigger a camera, but I have a problem with the configuration of my lines or exit lanes. I would not use that line output to trigger the camera. (I use a card NI PCIe-6353). LabVIEW is telling me that the number of lines in the channel does not have the number of rows of data:

  Possible reasons:

  Specified read or write operation failed because the number of rows in the data of a string is not the lines in the channel.

  If you use the digital waveform data type, make sure that the number of lines in the digital waveforms is the number of lines in the channel. If you are using Boolean data, make sure that the dimension of the array for the rows of the data is the number of lines in the channel.

  Number of lines in the channel: 1
  Number of data lines: 2

  Task name: _unnamedTask<11>

  How and why the number of data rows is connected to the resolution of my analog digital converter?

  I would appreciate your help! Labview code and a screenshot attached.

  Thank you

  Beff

  I got it to work by changing the "data format" "binary not signed" OR by plugging is not the "offset" for the Square Wave VI.  I think that the default "offset binary" data format works correctly if there is a negative value.

• problems with several hr2000 + external trigger mode

  I hope someone can me halp on this problem:

  I need to acquire spectra with two hr2000 + and a nirques256 with labview external trigger mode.

  The external trigger mode is done by another pc and also the train of pulpse generator.

  If a trigger after I'm going to generate a 100 impulse every 20ms for each device through a dedicted Council.

  If I only work with ghosts at times things works fine and the system is very stable, BUT if I work with two or three spectres by now I have a really strange (maybe for me) problem with the timeout.

  This is due to an incorrect number of pulses:

  If I work with two device then I need to produce pulses of 200 each 20ms but my spectrometers provide data every 40ms, but I need to equip every 20ms

  If I work with threedevice and then I need to produce pulses of 300 each 20ms but my spectrometers to obtain data each 60ms but I need to equip every 20ms

  Thus, in this way, I lose the synchronization of the three councils.

  An options may be to use a dedicated pc for each device

  I acquire the signal via usb and the problem is maybe duo to the bus

  I think maybe the problem is duo to the vi block! Maybe I can use single istance at times when I call the procedure

  Thank you

  I just solved the problem: it was a problem with reentrancy

  Default LabVIEW use not reentrant execution

• Problems with the help of web camera, it shows it programs and on the desktop. But when I double click on it. It will go to the program do not know what to do. Help, please. Thank you.

  Having problems with the help of web camera program does not work when I click it. don't know what to do. Please help thanks.

  Hello

  Right click on the shortcut tab icon - properties - look on the target line to see where and what type of program
  is supposed to work.

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  The OID of the Migration of OUD, hitting the problem with the attribute pwdhistory OUD

  I use sync DIP at the end of migration of data from OID for target OUD. Everything seems great so far, I have found that pwdhistory being migrated is not being validated by OUD password policy

  I do import ldif for OUD and find this pwdhistory field is populated with the same OID value. When I reset password in OUD-DOHAD with the word in the history of password,.

  Expected Behavior: Error Message from the OUD "" LDAP: error code 20 - already the value of specified password exists in the user input " "

  Course Behavior: OUD is what allows to reset the password in the password history

  Also found that when I try again with the same password, then it throws the error 20 code. OUD replaces the old values in pwdhistory after the password resets and written new values with stamp of password.

  It is a Blocker for us for migration in the history of password, I would like to join the forum and check if someone had the same problem and how they managed it?

  Thank you

  Satya

  Support of Oracle confirmed that DIO history for the OUD password migration is not supported. The OID and OUD records and validates the pwdhistory differently

• problems with the script in indesign

  Hi all

  I'm new and scripts so I hope I can explain what I need

  Well, I have an indesign file in which I need to insert an extra layer with the translation of a language, have a layer IN English and an extra a FR for the french.

  I found a script that's like that

  with (app.clipboardPreferences) {}

  pasteRemembersLayers = true;

  }

  var docTarget = app.documents.itemByName ('French.indd');

  var docSource = app.documents.itemByName ('French.indd');

  If (docSource.isValid & & docTarget.isValid) {}

  var numSpreads = docSource.spreads.length;

  for (var i = 0; i < numSpreads; i ++) {}

  app.activeDocument = docSource;

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  App.Select (App.activeDocument.spreads [i] .allPageItems);

  If (app.selection.length > 0) {}

  app. Copy ();

  app.activeDocument = docTarget;

  If (app.activeDocument.spreads [i] .isValid) {}

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  app.pasteInPlace ();

  }

  }

  }

  }

  but it seems to cause problems with the files,

  I have to say that the source is a file very heavy, even enter takes a long time.

  but I want to just get into the text layer,

  Do you think this script works finally, can you spot an error or something?

  Hello

  Your script is copying content of any doc (allPageItems) in an another doc - all number two need to have equal variances.

  You don't need to run the script if your goal is to create the new layer in the existing doc.

  The questions are

  What elements of the page must be copied into this layer

  AND

  should bound texts copied frames play any content

  AND

  wherever the content come from?

  Jarek

• Problems with the condenser after the recent update tool

  We have problems with the condenser so tool. The filter works correctly, but after a 'white' to use (looks like most exposed) rectangle remains in the image that cannot be deleted. We tried different layer modes without success: it does not react or the rectangle disappears but both the effect of the filter. Seems to be a bug (?) - Please help us as soon as possible. Thank you!

  Hi meuschke,.

  Our engineers are working on this issue, in the average as you try the below work around.

  After you change a 16-bit image using the Liquify Filter, edited areas are lighter than the rest of the image.

  Solution

  In the meantime, there are two solutions:

  Use pictures 8-bit instead of 16-bit images with fluidity

  Disable the GPU use to liquefy holding the key Option (Mac) or Alt (Windows) key down while you select the Liquify Filter in the menu filter.

  Related link: with the help of fluidity on the results of the 16-bit image areas clearer around changes

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Too many problems with the latest version of Lightroom

  Hi all

  I have too many problems with the latest version of Lightroom (CC 2015.2.1 1046594)

  In fact, the latest version of 3 or 4 were bad: instead of doing better, I always had more problems.

  So I would like to go back to a previous version of lightroom

  Adobe customar care, in Italy, is unnecessary:

  they can just to:

  -looking for answer on this forum

  -saying "you solve your problems just with the de-insall and re-install it.

  stop, no more...

  in this way they create me a lot fo iusses...

  I use the English version of the PS and LR, but they made me reinstall the Italian version of CC because it has been blocked

  the result was that CC does not recognize software, due to a different language version

  so, I contacted again Adobe Customer Care... they said "no problem, uninstall LR, delete these files and install this...

  I did and I let go 2 years to develop the parameters on the correction of the colors for my clients because they told me to remove a folder, I need!

  so, I ask you now if there is a way to return to a previous version of lightroom, any previous version...

  I never found better performance in more recent versions...

  I've always found, performance slower, more problems...

  personal idea: I do not understand why adobe are boicotting itself, but I think he do!

  Thanks to you all

  Hi ramontillo,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• Problem with the first pro effects controls

  Hi, Merry Christmas;

  I have a problem with the keys with the opacity effect in the effect controls panel. the following pictures I think make my problem more clear to understand:

  

  The picture above shows that the opacity of the element of gopro correction control is 100% unless I drank too much champagne, or fully visible on the screen!

  I want to do a transition effect showing the raft, which appear in the window of the following image, which is an Indian granary above the Colorado River.

  My video of the attic I zoomed up to the window they give the impression that enter the attic when I arrive at the moment I start, with keyframes to have

  inside of the attic without an opacity of 100% to 0% at the end of the clip attic. Unless the new champagne is very bad for my health and vision, I would then see the river

  and the raft! Well I did not and it gives me nightmares! What is the problem? I add that having a zoom smooth and regular, I used the effect time remapping in the video for attic.

  The clip of attic is just above the clip from gopro correction and he overlapped by the duration of the selected dissolution of the shown in the image below (I could of course use a resolution here, but I want to save money on an additional effect)

  

  Here is the view with the screen and the opacity of the element of attic at 25%. Normally, the clip of the raft must be visible then! the orange-red to the right of the screen is inside wall of the attic!

  
  

  

  Thanks for your suggestions... Claude

  Sorry guys, I found the reason. My fade is too short! I had put 2 "to fade and seems not sufficient due to the element of the upper layer time remapping effect! Sorry for the inconvenience.

  Claude