Problem with the Paging in VO tuning range

Similar Questions

• 'Problem with the paging file Configuration '.

  I use a Windows 7 Ulitmate 64 bit vm on my 15 "MacBook Pro (Retina Display). I attributed to the VM 1 core processor and 2 GB of RAM. His virtual HD is 64.2 GB (molten ' preference > general ", but molten" Preferences > hard drive "the slider is set to 40 GB.) In "Preferences > general" there is no recoverable space. Looking at the control panel of Windows 7, I see that there is barely 1 GB free of my 40 GB drive.

  The SSD on Mac is 250 GB and has 67 GB of free, so I guess I could until hard drive of the virtual machine to 60 or 70 GB of space and not paralyze the Mac operating system, and that I can do that by stopping the virtual machine deletion of snapshots and then mount the virtual HD size with the cursor before restarting.

  Moreover, this is the message I get from Windows at startup. Curiously, it is only after I have connected to my account, not as part of the start-up procedure, and it reappears if I log in. I don't have an another user account on the machine, but I guess that the problem comes from the virtual HD is almost full:

  Yes, deletion of snapshots and enlarge the size of the virtual hard disk (and virtual partition) will give you additional disk space on the prompt to work with but how is virtual memory configured in the Windows 7 guest?  You can watch that too.

• I am facing a problem with the beep.vi. I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound.

  I am facing a problem with the beep.vi.  I have a DAQ program, which acquired the signal and compare it to a threshold value. When a signal is out of range, a Visual and sound alarm has occurred. I use the VI beep.vi to generate the sound. Everything works fine except the sound alarm. It gives the table 1 d of type mismatch. I tried to fix this by placing it in a box structure. But it still does not work. If someone could help? Please find attached my VI. Best wishes to all visitors to the Forums of Discussion OR.

  Ihab El-Sayed

  published here: http://forums.ni.com/t5/LabVIEW/Playing-sound-based-on-exceeding-a-threshold-value-1D-array-data/m-p...

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• I have a problem with the numbers. Help, please!

  I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop.  I can't ignore the cell if it is not on specific pop upward.

  assuming the cell with pop's cell A1

  and if the context menu contains items:

  YES

  NO.

  MAYBE

  and the value you want to add in cell A2

  You can add the value in cell A2 when the context menu is 'YES' like this

  = if(A1="YES", A2, "") +.

  where is the expression that adds other cells if you want

  could be another cell

  = If (A1 = "YES", A2, "") + B2

  or a range of cells

  = If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• Problem with the generation of multi-sinus wavefrom of random phase using PXI-5412

  Hello

  I am trying to generate random phase multi-sine waveform using the PXI-5412 14 bits 100 M/s AWG on LabVIEW8.0.

  The version of LabVIEW8.0 for the PXI-5412 comes with a sample VI on multi-tone waveform generation. When I tried with a different combination of frequency and amplitude, there is no problem with the sample VI.

  Because I need the phase to be random for each frequency component, I had tore the tone cluster containing 3 elements, i.e. frequency, amplitude and phase, which feeds the generator of signals, and rebundle the cluster with elements of reading a CSV file by using a loop, a fixed value amplititude and a number of random phase of the frequency generated by a random number (formula lournies elements (: pi - 2pi x r). When the waveform multi-sinusoidale generated on the PXI-5112 100 MHz Digital Oscilloscope, it was pointed out that the waveform would change with the tested frequency range.  However, the amplitude of the wave is always ~1.4V (guess that's always default to 1 V x sqrt (2)).  There is no question also when testing the same combination of frequency and amplitude by using sample VI without modification.

  Please find attached the VI of the sample, snatching up to the version and the CSV file I used. Is there something wrong with the table 1 d of the cluster of 3 elements that I built and assembled causing the signal generator to ignore the value of input amplitude and, possibly, the input value of the same phase (as it seems that the amplititude is always set to the default)?

  The other question that I found on the two sample VI and ripped version is on the news of sampling.  The waveforms appear on digital Oscilloscope PXI-5112 always default to 10 cycles no matter how changed the sampling frequency and the number of samples.  For example, if the frequency is 10 Hz, sampling frequency is 1000 Hz, and I put the number of samples to 10000.  I'm supposed to get 10000/100 = 100 cycles.  However, I could see 10 cycles no matter how, I changed.  What should be the correct way to change the number of cycles?

  Really appreiciate your help and advice. Thank you.

  1 phase unit is in degrees (-180 to 180), no - pi pi.
  2 standardize Waveform.vi always normalize your amplitude of the signal. You can remove it to use your desired amplitue, but must make sure that it is not above 5412 spec.

• Problem with the change in value of listbox event

  Hello

  I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.

  You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).

  You must use a unique event structure managing all events.

  The overall program architecture looks like inside-out for me.

  For the buttosn, you must use action lock (switch not release!) and use the value changed events.

• Message 'there is a problem with the Windows Installer package

  I have Vista 64-bit Service pack 2

  On my computer HP ProtectSmart Hard Drive Protection has stopped working... .it shows such as the disabled and 'activate' is grey.

  I went to HP to download the new version.  It downloaded, but then to install I got the following message:

  "There is a problem with the Windows Installer Package.  A program run as part of the Setup did not finish as expected.  Contact your supplier of staff or the package of support ".

  How can I fix?

  Please help pleas...

  Thank you

  "C:\Windows\system32\msiexec.exe'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  Is the command line to install a particular product. Use the Task Manager to find your command line.

  Then change to add logging.

  "C:\Windows\system32\msiexec.exe" - working '% userprofile%\desktop\install.log'-I 'C:\Users\David Candy\AppData\Local\Temp\IPDT_Install.msi '.

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  
  --

• HPL2208w of the problems with the new laptop.

  Hello

  I have a 22-inch HPL2208w monitor, which seems to play on my new laptop Dell upward. The laptop has only a HDMI port, so I connect the monitor's vga cable to the Dell via an adapter.

  The display shows for a few minutes and requires only the range (I guess resolution) be changed to 1680 x 1650. For some reason I can't change the setting of the laptop to that. When I do not change the resolution (only if the monitor is unique and not dual output) the warning message remains on the screen and the screen is not at its best (wise clarity).

  Series Dell Win 7 64 bit, but the monitor was working on my previous Dell with the same version of Windows (with a VGA connection).

  Kind regards

  HA9005

  Hello HA9005,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you are having problems with the resolution on the HP L2208w 22 '' monitor and a Dell laptop. Unfortunately, as the monitor don't has no options that you can change in what concerns the resolution (it is passed by the laptop), I suggest that you try the Dell Forums for an answer.

  I know maybe it's not the answer you are looking for, but at least you know where to look for the answer now. Thanks for posting on the HP Forums. Have a great day!

• Laptop G60-549DX (with OS Windows7-problem with the microphone when using Skype)

  Just bought a laptop G-60-549DX. His mic is BAD. Voice of cuts to when using Skype. Help!

  I was able to solve the problem with the microphone on the G60-549DX when using Skype.  I spend up to 6-8 hours, talk with convenience stores of HP.  They were very friendly and helpful.  The same help a friend.  My friend downloaded updated bios and micro drivers.  HP technician asked me to turn off the laptop, then remove the battery, unplug the power cord. With battery removed and stop, I pressed the market / off power button for a good minute evacuate remaining power into the computer. When I restarted the laptop I micro worked. I did a little more fine-tuning of the installation of the microphone.  Now, it works well on Skype and sound recorder. I won't take this back within the 14 days return policy.  It's a good computer I can say.  The technicians were all very friendly and helpful.  They called me several times to check to see if it still works OK! They are HUGE!  They want to help with any other question, I have perhaps with the computer.  Thank you very much for the help. Everyone was SO helpful.

• Problem with the drive of entry

  Hello

  I have a problem with the connections of socket on blackberry.

  I send a command to my server and it will answer me with something like

  WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss

  SC = (SocketConnection)
  Connector.Open ("socket://fes.ngv-group.com:5080; deviceside = true");
  sc.setSocketOption (SocketConnection.KEEPALIVE, 5);
  is = sc.openInputStream ();
  OS = sc.openOutputStream ();
  OS. Write (Protocol.doVersion (UID). GetBytes());
  OS. Write (Protocol.doLogin (UID). GetBytes());
  int bytesAvailable = is.available ();<----returns a="" value="" of="">
  Char input [] = new char [bytesAvailable];
  for (int i = 0; i)< bytesavailable;="" ++i="" )="">
  input [i] = (char) is.read ();
  };

  However my contribution [i] array only contains v.

  Why is - this is.available line () returns 0?

  How to read in the range full of WORM R1; ACT: 0; CLV: 1.0.0; PRO: 1.0.1; UID: carlsum@ociss in my input array

  I agree that treatment work should you find.  I suspect that you have a coding bug.  Take a look at the folloing code.  The result was what I expected:

  test
  t
  e
  s
  t

  Byte [] testBytes = new byte [] {(byte) 0 x 74, (byte) 0 x 65, (byte) 0 73, (byte) 0 x 74 x};
  String testString = new String (testBytes);
  System.out.println (testString);
  Char [] testChars = testString.toCharArray ();
  for (int i = 0; i)< testchars.length;="" i++="" )="">
  System.out.println (testChars [i]);
  }

• problem with the help of the conditional formatting on a cell that is defined as the percentage

  Hi all

  I am facing a problem with the help of the conditional formatting on a cell that is defined as the percentage.

  I am using beaches for example:

  is equal to or greater than 10% - green color

  5%-10%-yellow

  less than or equal to 5%-color red

  
  

  the problem is that keeps the value 10% get yellow color when it should get green.

  
  

  i thought that is a rounding issue but when I change the definitions of the cell to learn more decimal places I see this part of the percentage 9.65% and some of them are 10.00% and they are both colored in yellow.

  I also tried to change the way range of 6 to 9%, but values between 9.65% or 5.5% are not colored.

  
  

  I really enjoy your help!

  You know the reason and the solution.

  change the format of the column and go or add a column more with decimal and opt for conditional and hide report.

  Thank you

  http://cool-bi.com

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Problem with the bulk loading IOM account to AD

  Hi all
  
  I'm doing a loading block account for AD in IOM. I followed all the steps in the oracle documentation.
  
  I entered the user in the format of CSV file data. Data in the example are given below:
  
  Primary data in the Table:
  UD_ADUSER_UID, UD_ADUSER_FNAME, UD_ADUSER_LNAME, UD_ADUSER_ORGNAME, UD_ADUSER_BNUMBER, UD_ADUSER_OBJECTGUID
  TWoods, Tiger, Woods, "' 22 ~ CN = Users, DC = gkidmsolutions, DC = com", B000004, 104 "
  TCruise, Tom, Cruise, "" 22 ~ CN = Users, DC = gkidmsolutions, DC = com ", B000005, 105"
  WSmith, Will, Smith, "' 22 ~ CN = Users, DC = gkidmsolutions, DC = com", B000006, d149e9add00198469b1ebef579911024 "
  
  Data in the Child Table:
  UD_ADUSER_UID, UD_ADUSRC_GROUPNAME
  TWoods, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  TCruise, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  WSmith, ' 22 ~ CN = users, CN = Users, DC = gkidmsolutions, DC = com ".
  
  All of these users are already available in both IOM and AD. I am trying to establish links between these users through loading bulk. I am able to load bulk account using the IOM bulk load utility. After loading bulk accounts, when I go to the tab the user resources, I see a user resource AD for the respective users with the status 'Configured'.
  
  However, the problem is when I try to update any user information through the process of the object resource AD shape, this not updated for AD. An exception mentioned below can be seen in newspapers. Looks like the loading block creates a map that can be seen from front end, but in fact, he is not pointing the user to the AD. Am I missing something? Help me!
  
  *********************************************************************************************************************************************
  "Current execution LOCKUNLOCKADADAMUSER
  Target class = com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > <>=
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks: unlockADUser: the user could not unlocked >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < =.
  >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < = start the Stack Trace = >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks: unlockADUser >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < String index out of range:-1 >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < Description: String index out of range:-1 >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < java.lang.StringIndexOutOfBoundsException: String index out of range:-1
  at java.lang.String.substring(String.java:1931)
  at java.lang.String.substring(String.java:1904)
  at com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.unlockADUser (unknown Source)
  at com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks.lockADorADAMUser (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  to com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSLOCK_UNLOCKUSER. LOCKUNLOCKADADAMUSER (adpADCSLOCK_UNLOCKUSER. Java:163)
  at com.thortech.xl.adapterGlue.ScheduleItemEvents.adpADCSLOCK_UNLOCKUSER.implementation(adpADCSLOCK_UNLOCKUSER.java:61)
  at com.thortech.xl.client.events.tcBaseEvent.run(tcBaseEvent.java:196)
  at com.thortech.xl.dataobj.tcDataObj.runEvent(tcDataObj.java:2492)
  at com.thortech.xl.dataobj.tcScheduleItem.runMilestoneEvent(tcScheduleItem.java:2919)
  at com.thortech.xl.dataobj.tcScheduleItem.eventPostInsert(tcScheduleItem.java:553)
  at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:604)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
  at com.thortech.xl.dataobj.tcOrderItemInfo.eventPostUpdate(tcOrderItemInfo.java:374)
  at com.thortech.xl.dataobj.tcDataObj.update(tcDataObj.java:664)
  at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:508)
  at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2906)
  at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:710)
  at com.thortech.xl.ejb.beansimpl.tcFormInstanceOperationsBean.setProcessFormData(tcFormInstanceOperationsBean.java:426)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB.setProcessFormDatax (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.jee.spi.MethodInvocationVisitorImpl.visit(MethodInvocationVisitorImpl.java:37)
  at weblogic.ejb.container.injection.EnvironmentInterceptorCallbackImpl.callback(EnvironmentInterceptorCallbackImpl.java:54)
  at com.bea.core.repackaged.springframework.jee.spi.EnvironmentInterceptor.invoke(EnvironmentInterceptor.java:50)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
  at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
  at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
  at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
  to $Proxy341.setProcessFormDatax (Unknown Source)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.__WL_invoke (unknown Source)
  at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
  at Thor.API.Operations.tcFormInstanceOperationsIntfEJB_h6wb8n_tcFormInstanceOperationsIntfRemoteImpl.setProcessFormDatax (unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at weblogic.ejb.container.internal.RemoteBusinessIntfProxy.invoke(RemoteBusinessIntfProxy.java:85)
  to $Proxy178.setProcessFormDatax (Unknown Source)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
  at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:198)
  to $Proxy337.setProcessFormDatax (Unknown Source)
  at Thor.API.Operations.tcFormInstanceOperationsIntfDelegate.setProcessFormData (unknown Source)
  at com.thortech.xl.webclient.actions.UserDefinedFormAction.editForm(UserDefinedFormAction.java:2033)
  at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
  at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
  at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
  at java.lang.reflect.Method.invoke(Method.java:597)
  at org.apache.struts.actions.DispatchAction.dispatchMethod(DispatchAction.java:269)
  at com.thortech.xl.webclient.actions.tcLookupDispatchAction.execute(tcLookupDispatchAction.java:133)
  at com.thortech.xl.webclient.actions.tcActionBase.execute(tcActionBase.java:894)
  at com.thortech.xl.webclient.actions.tcAction.execute(tcAction.java:213)
  at org.apache.struts.chain.commands.servlet.ExecuteAction.execute(ExecuteAction.java:58)
  at org.apache.struts.chain.commands.AbstractExecuteAction.execute(AbstractExecuteAction.java:67)
  at org.apache.struts.chain.commands.ActionCommandBase.execute(ActionCommandBase.java:51)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.commons.chain.generic.LookupCommand.execute(LookupCommand.java:305)
  at org.apache.commons.chain.impl.ChainBase.execute(ChainBase.java:191)
  at org.apache.struts.chain.ComposableRequestProcessor.process(ComposableRequestProcessor.java:283)
  at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1914)
  at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:463)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:821)
  to weblogic.servlet.internal.StubSecurityHelper$ ServletServiceAction.run (StubSecurityHelper.java:227)
  at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
  at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:300)
  at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at com.thortech.xl.webclient.security.CSRFFilter.doFilter(CSRFFilter.java:78)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.iam.platform.auth.web.PwdMgmtNavigationFilter.doFilter(PwdMgmtNavigationFilter.java:122)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.iam.platform.auth.web.OIMAuthContextFilter.doFilter(OIMAuthContextFilter.java:108)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to oracle.security.jps.ee.http.JpsAbsFilter$ 1.run(JpsAbsFilter.java:111)
  at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:313)
  at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:413)
  at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:94)
  at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:161)
  at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:136)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  at weblogic.servlet.internal.RequestEventsFilter.doFilter(RequestEventsFilter.java:27)
  at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:57)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.wrapRun (WebAppServletContext.java:3715)
  to weblogic.servlet.internal.WebAppServletContext$ ServletInvocationAction.run (WebAppServletContext.java:3681)
  at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
  at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
  at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2277)
  at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2183)
  at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1454)
  at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
  at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
  >
  < 5 April 2012 5:18:54 CEST > < error > < OIMCP. A/d converters > < BEA-000000 > < = end of stack memory trace = >
  EXECUTEREMOTESCRIPT running
  Target class = com.thortech.xl.integration.ActiveDirectory.tcUtilADTasks
  "# SessionContainer:valueUnbound: expired Session of the name of the event is: Xellerate.Session.

  Looks like a problem with the value of the UD_ADUSER_LOCKED field. Change to retry and value non-zero.