Problem with the remote FTP Site

Similar Questions

• Anyone know if there is a problem with the "Windows Update" site? Since May 11, 2010...

  Anyone know if there is a problem with the "Windows Update" site? As of May 11, 2010 I could not access it for 2 days now.  I get an error report indicating that he has a "problem with the site '... Not sure if it's my computer or the site itself. I just need to check updates and download them. I would be grateful for any feedback...  Thank you!
  ~ Jenifer

  It is without a doubt.  There were a few patches published today, and I was able to update all my machines successfully.  This looks more like a virus problem.  Have you run a virus scan recently?  Many times, if you are infected the virus will prevent you to access Windows Update.

  You can also use Microsoft Fix It to reset the Windows Update components: http://support.microsoft.com/kb/971058.  This could also be your problem.

  Let me know how it goes,

  Barbara

• Problem with the BlackBerry Developer Site

  We are currently experiencing a problem with the integration of BlackBerry ID with the BlackBerry Developer web site.  This prevents the developers to create a new BlackBerry ID Token, connecting Issue Tracker and Developer area and potentially other areas that require authentication.  Trying to access one of these pages gives the following error.

  Sorry, there is a problem with the page you are trying to reach and it cannot be displayed. Please try again later.
  

  Teams are trying to solve the problem.  We apologize for the inconvenience.

  The problem has been resolved.  You should now be able to connect Issue Tracker and generate BlackBerry ID chips again.

• Problems with the Eclipse Update site

  Hello

  I try to install the component pack v6.0.0. I'm just following the instructions here

  http://NA.BlackBerry.com/eng/developers/javaappdev/javaupdate.jsp

  and installation just hangs (or I get the Exception of transfer). I found many messages of forum on the problems with the update site but no solutions. Is this one? Or y at - it another way to install the component pack in eclipse?

  Thank you

  Sarah

  Hi Mark,

  Apologies that I was on vacation and never had to deal with that. I just tried to update the software development kits using the same procedure. It must have been a problem with the update site before that it worked well this time.

  Thank you

  Sarah

• a problem with the alignment of site on the Tablet and phone version.

  I have a problem with the alignment of my site on the Tablet and phone Version of my site.

  If you open the Tariffuehrer.com site on the tablet or smartphone, you can see, the page is aligned to the left in the browser. I want the page to Center. I did find an option for it in the backend of muse.

  I'd be happy if someone can help me.

  Hi Michael,

  I can't view your site as it showed error 403,

  Can you please recheck the url of your site and repost it so that I can check on this subject.

  Kind regards

  _Ankush

• Problem with the download Web site

  I'm having a problem when I publish my site Builder at host gator.  The following errors are happening, and I don't know if these are problems of vista or not

  l\Temp\WER70C1.tmp.version.txt
  \Temp\WERC789.tmp.AppCompat.txt
  l\Temp\WERC7F7.tmp.mdmp
  Thanks advance!

  Cat hubrich,
  You will need to check with the Support of Ewisoft with this question.  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have problems with the remote (RDP) desktop sessions, I can't get the session to go full screen after being reduced to a minimum.

  I can't get the session go full screen after be kept to a minimum.

  I did the following things to make this work:

  1. Updated the operating system
  2. Check my RDP options to make sure that it is set to mode full screen
  3. I tried 3 different computers that it happens on both of them have every two Windows 7 Professional and both are 64-bit (XP Machines have that happen)

  Details:

  I connect to my company TS servers and application servers (all running 2003 OS). When I reduce the view full screen, via the connection bar, I go back to enlarge the window and I get a window view not a view full-screen. I've only been able to reproduce this on two machines and tested a total of 5 machines Windows 7 Pro. I also tested on a XP Machine and impossible to duplicate. The XP and 2 of 7 machines (who both question) are on a connection, the others are all on separate connections in separate locations. Is this a bug in the program or is their environment I'm missing? Still, full screen has been selected in the display area.

  Thank you

  "There is a kind of"bug"with some resolution which could refuse to full screen.
  the only way to force full-screen mode is by pressing Ctrl + Alt + break.

  Remote Desktop does not return to full screen
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/48d6cb3a-C743-404F-8411-6cedbb858c2c

  http://www.Google.com.au/search?q=remote+desktop+fullscreen+%22windows+7%22&SourceID=IE7&RLS=com.Microsoft:-to the: IE-address & ie = & oe = & redir_esc = & ei = oFmCTYufNIeKvQO-nNjHCA

  See if your problem is also related to video drivers?  He has other suggestions in the links, the first is XP, but the last one is Windows 7.

  "Hey Alshrim I thank you for your help. I've just updated my video driver and the remote connection started working: Dstrange and interesting! "Thank the people who helped me.

  Remote Desktop is not connecting
  http://www.Tek-Tips.com/viewthread.cfm?QID=1591106

  Issue RDP
  http://www.Tek-Tips.com/viewthread.cfm?QID=1593827

• Problems with the remote desktop connection... Does not?

  After connecting via desktop remotely to another computer XP to XP... I can connect, but I don't get the icons on the desktop or the start menu.  I am able to connect to the remote computer successfully.  I find myself with a mouse cursor and the blue screen for a very long time without activity.  Send CTRL + ALT + END to the remote machine does nothing.

  Hello

  You have the right version of XP (host must be XP Pro).

  You have opened the RTD ports through the firewall?

  Maybe this can help.

  http://www.windowsnetworking.com/articles_tutorials/using-remote-desktop-Windows-XP-Pro.html

  http://www.Petri.co.il/install_remote_desktp_web_connection_on_windows_xp.htm

• had a problem with the remote office, locking of the time-out and the remote host

  I have two computers that both are connected to the network of my company.  Both computers have Windows XP Professional Version 2002 Service Pack 2 installed.  Both computers were set up for remote desktop connection.

  Computer A is a desktop unit and computer B is a portable device.

  Computer A, I can run the remote desktop to computer B without any problem.

  When I run the desktop remotely from computer B to computer A:
  -I see the typical login screen
  -After I typed the user name and password, and then after about 30 seconds, I got the message delay: "the remote connection has expired.  Please connect to the remote computer again. »
  -at this point, the computer A's lock-up, does not have a mouse or a keyboard. the only way out is turning the device off.

  I spent hours on the website of microsoft looking for possible solutions, but can't find.

  According to some suggestions, I have disabled "Symantec Endpoint protection" and "Microsoft Office Communicator", but it did not help.

  Any help is appreciated.

  Check out this thread

  http://en.community.Dell.com/forums/t/19271963.aspx

• Problem with the remote desktop connection.

  Hello

  I have two computers on my network.  I'm trying to use the remote desktop connection to connect to each computer.

  Computer A allows me to edit or delete the credentials when I uncheck the box always "ask for credentials.  There are two sentences under the user name field.  The second sentence says "To use saved credentials, uncheck the following."

  Computer B I cannot edit or remove the credentials.  The checkbox is labeled "allow me to save credentials".  There is no ability to modify or delete credentials.

  When A computer using I am able to connect to computer B by using RDC.

  When using computer B I am unable to connect to the computer A using DRC.

  Any help would be appreciated.

  Thank you!

  Hi David,

  This question is more suited for a TechNet audience. I suggest you send the query to the Microsoft TechNet forum. Check out the link to do so:
  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  Please let us know if you have more queries on Windows.

• FTP problems with the linux ftp server

  Hello

  I have a problem when trying to get a file via FTP. The FTP server is an embedded linux system, get the file manually via FTP is no problem, but to TestStand, I get the following error:

  Cannot download the file ' / opt/log/sislog.log'.
  Check if the local and remote path exists and is read and write respectively.

  The system does not have the specified path.

  error. I know that the file is there, the permissions are given. So I tried the other way around and tried to download a file called "mysislog.log" in that directory and download it again. I get the same error, but when I telnet to the LUX machine, I see that there is a file in this directory, but the file is called "\mysislog.log" - so I think backslash TestStand put the last bar in the name of the file and therefore impossible to load the file.

  Here is the list of the repertoire of the LUX machine:

  root@FCM2001-A2-03-37-4A: / mnt/exponent0/opt/log > he's
  -rw - r - 1 root root 0 16 Apr 08:51 \mysislog.log
  -rw - r - r - 1 root root 111219 16 Apr 08:41 syslog_0.log
  -rw - r - r - 1 root root 262096 Apr 13 11:52 syslog_1.log
  -rw - r - r - 1 root root 35503 Apr 13 11:53 syslog_error_0.log

  Any ideas?

  Hello

  Unfortunately, this is a known issue that will be fixed in a future version of TestStand (although I don't know what future version). The FTP step was designed for LabVIEW RT.

  The workaround is to call a code module that runs this ftp upload, possibly using a ftp software.

  See you soon,.

  Cheggers

• Weird problem with the Daily Kos site only. I have a screenshot.

  Hello

  With all the stories of Daily Kos that I click on in their emails, everything is now on the far left of the screen. Here is a list of hyperlink tags, and I have to scroll the way to make history. Am I missing a plugin or something?

  

  Thanks for any help you can give me. I know that someone will recognize what is happening.

  Oh, one last thing. Chrome. Doesn't happen with Safari, Chrome only. Havnen can't tried Firefox.

  Jerry

• Have a problem with the Remote Desktop feature

  I'm doing my accessible remote desktop but the only option I have the 'rare' tab in the property window system is 'Remote Assistance '. All online guides show three remote desktop options which I don't have. How can I fix?

  Running Vista btw *.

  Hello Hallenhero,

  ·         What do Windows Vista version that you have installed on your computer?

  You can not use Remote Desktop connection to connect to computers running Windows Vista Starter, Windows Vista Home Basic, Windows Vista Home Basic N or Windows Vista Edition Home Premium. You can, however, connect to these editions of Windows Vista on computers running other versions of Windows.

  As a result, remote desktop is not available on these versions of Windows. You can see the bottom of the article for more information on this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• problems with the mobile phone site

  I loaded all my host files, but cannot get my design office to redirect to my mobile site.

  Yes, publish to site BC that would help here.

  In, click on publish Muse > enter a site name (something like testsite.com) > discovered the site.

  http://TV.Adobe.com/watch/learn-Muse/publishing-your-site-to-business-catalyst/

  Thank you

  Sanjit

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies