HP OfficeJet Pro 8600 no FAX OF the COMPUTER

Similar Questions

• OfficeJet Pro 8600 more Scan to the computer

  OfficeJet Pro 8600 more "computer scan", "Save as editable text" computer PC with Win 7 and JO 8600 Pro installed and operating normally, JO 8600 Pro on a wired home network.

  How does the 8600 file names and how can I control the names.  My 8600 JO ProPlus is name my text files using a name I once attributed to a sweep of several weeks rather than use some name generic scan or the date!

  To change the settings of advanced scanning

  Function of your printer, advanced settings contain options to adjust the brightness, contrast, quality scan, set the OCR language and change the destination of digitization.

• OfficeJet Pro 8600 Plus: Scan of the computer does not work with Win8.1 [solved: problem with USB3 Boost]

  Since I have installed 8.1 (pro), I can't use my 8600 software Pro for scanning the computer (via USB). It seems that there is no communication with the printer regarding the scanning software, but printing as usual.

  Tried to use the HP printer Assistant: when I click on the button "scan a Photo Document or", I get a message "inaccessible Scanner. Also restarted the printer.

  When I try to scan from Photoshop, the system first finds the printer, but it fails to connect.

  Update HP says that my system is up to date.

  HP Print and Scan Doctor 4.2 concludes and tells the printer on the welcome panel and seems to be able to communicate with him, up to a point.

  It gives me a error 'pilot' (sorry if is not called in English - he takes over my keyboard language, which is French and says "Pilot error") and says that no communication could be created between the printer and the driver for scanning, and I have to restart the computer...

  So I did and revived the software of the doctor, who gave me the same error message. This time, I clicked on 'Ignore' and let things. He ran a "Scan" Test twice and said that everything was going well or had been repaired. But strangely nothing on the printer during these 'tests '. And in the end, as he offered to do a scan test myself, I clicked on OK and I got the error message "inaccessible Scanner" again.

  Then I did my scans on a USB key, as I have done a few times already, and has gone very well. But I'd be happy to have this function "Scan to computer" back. How?

  Thanks in advance 23. It is resolved! See to the end.

  I use McAfee (All Access - Total Protection). All green. I did some research using 'Paint', 'Windows Fax' and 'Scan' and checked all the results using McAfee: 'does detect any items that require your attention.

  Here is a series of screenshots when you run printing HP and doctor Scan:

  

  

  I click on "Scanning troubleshooting..."

  

  I click on 'Ignore' right now because I know now that a restart will not help, but I have already tried (see my first post).

  

  

  It seems that the problems have been repaired. And if I click on 'Scan Test', it seems too good, initially...

  

  But if I go on and click on "Scan", bye bye:

  

  Everything is the same as the first time, as I remember.

  I checked services: dependencies are OK (RPC is in the WIA Service dependencies). Both services are "Running" and "automatic". I stopped and restarted WIA. No change.

  I launched a sfc/scannow:

  

  Before that, I changed the USB (a new one): no change.

  AND THEN: I unplugged the USB cable connecting the port (USB3) standard (directly on the rear panel of the motherboard) and plugged into a PCI USB3 card. And all was well with the scan.

  Do you think this says something about my motherboard (Asus X 79 Deluxe brand new) or on the Officejet?

• OfficeJet Pro 8600 N911A: fax wireless

  I need to be able to SEND faxes.  Is it possible to configure my Fax on my Wireless HP Officejet Pro 8600 model N911A?

  Welcome to the community of HP @BARBEO,

  I understand that you are looking to set up your HP Officejet Pro 8600 fax functionality. I'll be happy to help you.

  It is possible to configure your HP Officejet Pro 8600 to fax, however, fax can be used through your wireless network, so the printer will be connected with a telephone cord. Below, I've posted a link to a document that has some instructions on how to configure the functionality of your HP Officejet Pro 8600 fax. Please try all the steps in order and get back to me with the results.

  HP Officejet Pro 251dw, 276dw, and printers of the 8600 series - set up the all-in-one to send and receive faxes

  If it helps, will testify of my answer by pressing the 'thumbs up' below, or click on the button "Accept as Solution" if I helped you reach a solution.

  I hope this helps and have a nice day.

• HP Officejet Pro 8600 - Paper copy on the glass of the scanner, Officejet tries to copy the ADF

  I'm trying to copy a document on my HP Officejet Pro 8600.  I placed the original face down on the scanner glass.  There is no original in the ADF.  Then, I pressed "Copy" and "launch in black."  the Offficejet then "think" the original is in the ADF file and try to copy a non-existent original.  The Officejet then generates a paper jam «»
  in the ADF file' error message with instructions to clear paper jam and press 'OK' and spews a piece of paper from the paper tray. There is not an option for 'back '.  If I try to humor the Officejet by opening and closing the cover of the ADF and pressing 'OK', the Officeject generates a copy which is covered with black ink.  If I ask preview copy o, the document on the scanner glass is displayed.  I can adjust margins, etc.  When I select then 'copy' and 'Black start', the Officejet is trying to copy a nonexistent document in the ADF and generates the "Paper jam" message again.  Since there is not an option "go back", I turn the printer off, then turn it back on, and then try again.

  How do I train me or the Officejet for copy of the scanner glass when the original is located on the glass of the scanner NOT the ADF?

  Thanks for your help to solve this frustrating problem.

  Hi Knitter507,

  Try to do a hard reset as described in the following link.  Click here

  If that doesn't help, can you print a printer status report and give me the a.) Product # and B.) Version of the firmware of the printer?  To print the report, press on the arrow to the right on the screen of the printer control and then configure / reports / Printer Status Report.

  What is the operating system for your computer?

  You are able to make a hollow photocopy the ADF?

• OfficeJet Pro 8600: Help: I changed the cartridges and they are locked (JO 6800)

  I had a few problems print quality with my OfficeJet Pro 8600 and I changed the ink cartridges (950/951XL). Unfortunately, the problems are remained so, instead of buying a new printer head, I bought a new printer: a 6015 OfficeJet at Staples. First of all, I had to install the set up of the cartridges but pass them the old printer, which I had already brought to the depot of garbage to new XL versions. And guess what? The cartridges were locked! Now, I have to remove the locks in the old broken printer (what is left) or I can throw them-which is a shame because I bought the new 8615 especaially because it uses the same (expensive) XL cartridges. Please HP: help me. A loyal customer.

  Any cartridge that is installed in your Officejet Pro 8600 would not be usable in another printer, including a different of Officejet Pro 8600 8600 Pro Officejet "cartridge protection" was defined.  This cannot be reset, even in the original printer.  Turning off the cartridge of the printer's built-in web server protection will not affect future cartridges installed in the machine.

  Given the circumstances, I suggest call HP and ask if they can help to.  If they decline please post here and I'll see if I can help with a different approach.

  You can disable the protection of the cartridge in your Pro Officejet 8615 for the future.

• OfficeJet PRO 8600 digital Fax

  My Officejet PRO 8600 will receive my faxes but not store them digitally plus. A PDF file is displayed in my incoming fax folder named output.pdf with 0 KB in size and does not open. Made for about 8 months to a maximum of 2 days. I have Windows 8. Help?

  Hello @StarrCann,

  Welcome to the HP Forums!

  I understand that your digital faxes do not open on your computer using the Officejet 8600. I will do my best to help you! I suggest the setting up of the digital fax on your computer again. I'll give you a document from HP on Setting Up Digital fax HP to save received faxes on your computer.

  You must delete the old folder digital fax your computer first, before proceeding with this document. Please post your results, I will be looking forward to hear from your part, have a great day!

• OfficeJet Pro 8600 wants fax info when asked to print

  OfficeJet Pro 8600 prints test page ok, but do not print anything My Documents or a receipt from a purchase online.  A screen will appear with corner 'Send fax' at the top left, boxes of 'to', 'add a cover page', 'Add scan' and 'settings '.  There is no error message or the number.  Tried to remove and reinstall the printer drivers and.  Worked fine for 2 months, then started it.  It is not connected to a phone line and has never been used for faxing.  It is connected to the wireless computer network.  Tried to connect to the network with cord - also not able to print.  Any help appreciated.

  Hello

  I guess that the fax printer is set as default, download and execute HP Print and Scan the link below Dr utility.

  www.HP.com/go/Tools

• HP Officejet Pro 8600: Receiving fax nobody's just get lines

  He works very well, but today when I sent a fax, they received what it takes in lines (such as a bar code).  I have tried a different fax number and they have had the same problem.

  Hi @Jazoola

  These lines appear when you copy or scan too? You have the printer connected directly to a wall outlet or is this a surge protector or power bar? Even if you have used a surge protector/power bar this whole time and you feel that this is not the case, please connect to a wall outlet so that we can eliminate the source of energy as the primary cause.   Questions when it is connected to an uninterruptible power supply/Strip/surge protector power

  In this document, you will see, QUESTION: questions or problems may arise when a HP LaserJet printer is connected to a UPS (UPS), a power strip or a surge protector

  ↑ This is not limited to the Laserjet printers.

  We will perform a hard reset. To do this, leave the printer and unplug the power cable for 1 minute. While it is unplugged, press and hold the power button on the printer for 10-15 seconds to release built his power, then after the minute, plug the printer in.

  In addition, please click the appropriate link below to make sure that the printer has the latest firmware update. This update of the firmware can improve the performance of the printer and fix various defects.

  HP Officejet Pro 8600 N911g_n Firmware (more models and premium)

  HP Officejet Pro 8600 N911a Firmware (8600 e - all-in - One Printer)

  I hope this helps.

• OfficeJet Pro 8600 Plus: cannot remove the pop-up windows deleted printer HP Pavilion p6-2014

  Hello

  I read the corrective action of 24/09/15 to HP Community@Felix_B to remove my HP printer previous (see the info solution reference below). He has worked to eliminate a group of print job corrupted. However, the pop-ups started continue. The two pop-ups State "there was a problem starting C:\Program HP HP Officejet Pro 8600\bin\HPStatusBL.dll. The specified module could not be found.  Can you please help me remove?
  
  Thank you-Chuck

  Re:

  Solution! Re: Unable to remove my printer
  Options
  24/09/2015-13:32
  Welcome to the community of HP @Felix_B,.

  Hello
  File Exploer type %appdata%\Microsoft\Windows\Start menu Startup into the address bar and press ENTER.
  Delete the shortcut to monitor alerts for Non-Existing printer ink and the error should appear is no longer.
  
  Kind regards
  Shlomi

• How can I get my HP Officejet Pro 8600 more to send the scanned item directly to e-mail?

  I just moved to the top of a new HP Officejet Pro 8600 more a HP 6500 printer.  On the old 6500, it gave me the choice to send the scan to my email, however, that option is not available for me on the new scan of 8600 software.  How can I add email to my choice of where to send the scan?

  Thank you...

  Hi NICOLI12,

  Welcome to the HP Forums, I hope you enjoy your experience!

  I understand that you want to know how to scan to e-mail.

  I'll be happy to help you.

  You should be able to analyze through the scanning software HP to e-mail can also scan to e-mail from the control panel of the printer. I have provided a document to find out how Scan.

  Hope that solves your problem.

  If you are on Mac, please let me know.

  Thanks for posting on the HP Forums.
  Have a wonderful day!

• OfficeJet Pro 8600 appears twice in the selection of drop down menu printer with each of the different names.

  Hello!

  I recently acquired an Officejet Pro 8600 and immediately connected to my network wireless as stated in the manual. No other type of connection has been used beforehand and the operating system is Windows 7 64 bit.

  After that the installation of the printer driver appears twice each time that a program asks me to select a printer from the drop of the printing devices in the typical menu of preparation of printing.

  There is an entry for "Officejet Pro 8600 (network)" and something in the sense of 'HP95CDN' (Officejet Pro 8600). I can't remember the exact names off the top of my head, but it is the name of the printer with the 'network' in brackets in one case and a kind of shortcut ID printer with full name in parentheses in the other case.

  According to the program, one of the options gives the desired impression while the other simply causes a queue of indelible impression for the name of the unit in question that is stuck to a few KB of data transmission.

  Usually printing works with the device with the identification of the printer in its name, but I recently had a case where with LibreOffice printing only works with the other choice.

  Can someone explain to me exactly means?

  See you soon,.

  Pete

  Direct entry Wireless will be visible under menu so direct wireless is on... However, since you are able to print another icon (not the network icon) I assume direct wireless is off coz you will not be able to print from wireless directly on the printer if you are connected to the router.
  
  I believe that the icon of the printer (not the network icon) has a port WSD assigned and is automatically detected by the operating system and installed.
  
  Go to service window and check if you have any input that says function Discovery Provider Host and see if it is started. Try to stop the service, and remove the icon of the printer (not the network icon) in the print server properties.
  
  Restart the PC and check if the icon comes back or try to uninstall and reinstall
  
  Let us know the result

• Clubhouse 23 HP: HP Officejet Pro 8600 is offline to a computer, but not the other

  In our office network, we have problems with printing. We have several computers set up in the network and all print on the same printer, our HP Officejet Pro 8600. However, you can print from all except one. It reports an error in offline mode. Usually, rebooting the computer and the printer solved that problem, now, is not the case. I uninstalled the printer, reinstalled and it worked temporarily. I also disconnected from the network to the printer and the computer and reconnected them both. I have also shut down the computer, the printer and the router and restarting their router, printer, and then computer. I still have the same problem with just a computer. Any help would be greatly appreciated.

  I solved the problem on my own. I had to remove all the devices on the network printer and reinstall on all devices.

• HP officejet pro 8600 more random print the unreadable text

  Hello

  I have a problem with a newly acquired HP officejet pro 8600 N911g. When you print the document, some pages are filled with unreadable text instead of the original text (e.g. ' eft! bdujtop! dpssf-wcy TPQ! QSF"). It happens whenever I have print the same document, and sometimes on a few lines of certain pages.

  When the same issue occur on the same page, that's exactly the same gibberish (so it isn't random text).

  Here is an example of an impression goes wrong in the middle of a page.

  The printer is plugged in and the PC is wireless.

  I tried to launch HP print and scan of the doctor, he did not find any problem.

  He tried to print with another PC, same problem happened. My OS is Windows XP with SP2 32 b.

  The printer model number is N911g, the product number is CM750A and the number is 22241.

  Any advice would be helpful.

  Thanks in advance.

  Normally, this means that there is a problem with the radio wireless on the router. It may work fine for everything else for now, but it could be losing signal slowly, that would not be noticed by most of the things until the signal was almost gone. Signals of printing and scanning signal, for some strange reason, I've never even had explained to me, get back on it lose everything first and suffer the worst. I try to search for the firmware updates that may be available for your router, as it may just be a firmware issue that causes a light signal lose. If that does not resolve the problem, I would look in get a new wireless router.

• HP officejet Pro 8600 +: Missing page in the «HP Print for Chrome» software orientation option

  I can print OK in the format default portrait of a model of Toshiba Chromebook CB30-B-104 for a HP Officejet Pro 8600 + using "HP Print for Chrome" (installed from the app store for Google Chrome), but I can't find an option anywhere to change the page orientation. So if I print a document/image oriented in landscape format, it occupies only half a page of A4 portrait oriented superior. I tried to turn the image/document in the print dialog, but the rotation is ignored when printing is performed.

  Is this a "bug" or am I missing something?

  Updated February 10, 2016

  My original statement was misleading. I should have checked my facts more in detail.

  I cannot find an option called "Layout" to select "Wonderful landscape" or "Portrait" page orientation when you try to print the PDF files. When you try to print from other sources, the 'Layout' option seems OK.

  Hello @JBL11.

  Welcome to the Forums of HP's Support. I understand that you have a problem with the page orientation when printing with HP for Chrome print Chromebook. I would like to help,

  When I tried printing of Chrome app I had an orientation option. I pull a document and press Ctrl + P.

  Then I double checked that Print of Chrome was my printer destination. (I also use Google Cloud Print to the same printer).

  My options going to the bottom of the list are Destination, Pages, and page layout. Put in page gives me the ability to change from portrait to landscape.

  Have you tried to uninstall and reinstall the application?

  1. Click on the list of apps icon in the launcher at the bottom of the screen.
  2. Find your application in the list and right-click (click with two fingers on a Chromebook) its icon.
  3. Select Delete chrome.

  Gives it a try and let me know how it works.

  If this solves your problem please click on accepted Solution so that other people with the same problem can find the easiest answer. If you want to say thank you, it's always nice when someone clicks Kudos. If you have any other questions let me know.