RV220W works only with the PPTP server on one VLAN only

Similar Questions

• a computer laptop, internet is accessible only if proxyserver offline, my office internet is accessible with the proxy server. without him we cannot access the internet.

  I am faced with a kind of strange and unusual error. in my office, the internet is accessible with the proxy server. without him we cannot access the internet. However, there is a laptop computer on which some time the internet is accessible only when I leave the proxyserver only on that machine... any idea?

  Hello

  Work on a domain environment?

  Changing the proxy settings is something that you usually only have to do if you connect to the Internet via a corporate network. By default, Internet Explorer automatically detects proxy settings. However, you may need to manually set a proxy with information supplied by your network administrator.

  If you are on a domain environment then please post the question on the link mentioned below using:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/threads

• I wish I had a client on my PC to communicate with the Lync server, but it does not work.

  Evaluation of the VHD Lync 2010 program

  I'm quite new to Lync and I'm trying to understand how it all works. I downloaded the virtual computer files and got successfully throughout the environment, but now, I would like to have a client on my PC to communicate with the Lync server but I'm not having any luck.

  Here are the servers that I have:

  DC

  Exum

  Lync-Qms

  Lync-Se

  SPS2010

  These are all in an internal network and I gave the Lync-SE server outside access, assuming that it's the server that my client needs to communicate with because he runs the Lync server. Initially, I was getting a certificate error. I exported the certificate of the server DC, installed on my client and the client toward the DC server who gave me the certificate number, but now I get an error that the server is temporarily unavailable. I'm far from base here?

  Hello

  Thank you for visiting the Microsoft answers community site. Your question is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows 7 Server forum.

  http://social.technet.Microsoft.com/forums/en-us/category/OCs

  I hope this helps.

• Internet Backgammon no work, receive error message: "a network error occurred during communication with the game server.

  Original title: All of a sudden internet backgammon works not

  Just your portable Windows 7 computer base. Everything worked well. Started playing internet backgammon... has won EACH game Yes! Took a break for an hour or so... came back and now have message saying a problem to connect to the internet game server.  Someone knows what's the problem?  What it says is specifically "a network error occurred when communicating with the game server". That the devil which means?

  Hello

   

  1. what browser do you use?

  2 are you facing the same issue with other games like asset stings on the internet?

  I suggest you follow these methods and check.

  Method 1: You can check if the problem appears in a clean boot state.

  Refer to this link: http://support.microsoft.com/kb/929135

  If the problem is solved, check which service non-Microsoft is the source of the problem; referring to article and following the other steps.

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Temporarily disable the security software and check if the game works very well.

  Refer to this link: turn off the antivirus software

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  When you disable the Antivirus: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 3: If the previous step fails, temporarily disable the Windows Firewall and check if the game works very well.

  Refer to this link: turn enable or disable Windows Firewall

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off

  Note: After checking the functionality enable the Windows Firewall.
   

  I hope this helps!

• Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

  Check your hosts file.

  help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• RV325, firmware v1.3.1.10, how to disable the PPTP server

  Hello community,

  I have a problem with our RV325. After a reset the PPTP server is enabled by default. Any attempt to save the form in the "PPTP server" settings causes an error as shown in the attached screenshot. I think it's a security issue. Does anyone have an idea how to disable? Pourrait restoration from a manually edited saved startup configuration work?

  EDIT: I managed to block attempts to connect PPTP with the firewall by refusing port 1723, but I still prefer to stop the PPTP server somehow.

  Hello

  I hope you do well, I want to let you know that there are some problems with this version, so it is improved. So I advise you to wait for updated firmware.

  Kind regards

• VIX file in the user interface designer receives the data from the Web service application that communicates with the SQL server database

  I created the Web service VI ("Mt-insolacije.vi"), which has two terminals of the input string (FROM / TO) for the dates of arrival and exit of two data terminals (table 1 d) from database (MS SQL server). This VI communicates with the database with functions of the database with a DSN and SQL query appropriate palette. There are two tables with two data (time and Insolation) columns in the database.

  This VI works when you run in Labview 2010, but when I used it as VI in UI Builder it returns no data.

  Could you please help me find a solution. Is it possible to communicate with the SQL server database in this way or there is another way?

  There are two files attachmet: Image of .vix file in Interface builder and .vi file ("Mt-insolacije.vi")

  Please help me ASAP!

  Thank you

  Ivan

  I found the solution problem is in the DSN. I've been using the user instead of DSN system DSN.

  It's important to create the system DSN if you want your VI of web service to communicate with the database.

  PS Please put feature bundle format timestamp and XY graph in the web user interface designer. It's complicated to trace data with datetime on X axis without them.

• Games on the Internet give the error "a network error occurred during communication with the game server. "Error code: 0 x 80041006.

  I ran the System File Checker tool analysis. Response has been no problem with the configurations. Also, I did uninstall and reinstall. I keep getting the message: "a network error occurred during communication with the game server. "Error code: 0 x 80041006 ' this error message occurs on all the computers I own.

  Actually, no, the answer in the links were also less than helpful... suggested this, that.  Things that I had already done b4 posting my question.
  More funny: after that I posted my comment about the fault is not not in my machine and those of thousands of others, but in MS, spades servers suddenly started working again.  Coincidence? No doubt, but still...

• Outlook express hangs after the connection with the mail server

  OE6 hangs after the connection with the mail server?

  Make sure that the other machine is not check that the server so often a machine is not problems because it cannot be verified.

  Try to delete the account, compact the folders and close OE and reopen it and add the account back again.  Also make sure that the antivirus software is not interfere (see www.oehelp.com/OETips.aspx#3).

  You can also telnet to the server directly from this computer to see if it works (see http://techhelp.santovec.us/pop3telnet.htm).

  Sometimes it gets stuck in a message on the server and it can not get downloaded by OE, so it may be necessary to remove the message from the server, but if the other machine got, maybe it's not the question.

  Steve

• System will not be activated. Receive the error message "system could not establish a connection with the activation server.

  Activation.

  My OS system has been altered, so I formatted and installed new, but can not activate. I have this installation id 348020-631951-163976-154093-556113-629786-940105-229483-661432, I need confirmation id because my system could not establish a connection with the activation server

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• NAC integrated with the comment server

  Hi all

  I met a problem that happened when I joined NAC with the comment server.

  Hope I can find the solution here!

  When I create an account to the comment server, the account will be created in the NAC as a local user.

  If I chose "time profile - start-end", the account will be created in the NAC.

  But if I chose "Time profile - first Login", the account will not be created in the NAC.

  If the guest cannot connect with this account using "time profile - first Login.

  All configurations of the document including "Radius Client and Accounting" has been correctly configured.

  But I can't yet find the solution.

  Please answer me if you know the answer. Thank you very much!!!

  Jet Li

  If Taiwan

  Hi Jet Li,

  This should be because only based on time with beginning and end is supported when you turn on the END with the NAC Appliance solution:
  http://www.Cisco.com/en/us/docs/security/NAC/guestserver/configuration_guide/20/g_guestpol.html#wp1063409

  "Cisco NAC comments Server Version 2.0 supports only start/end and creating profiles when used with Cisco NAC appliances"

  Kind regards

  Fede

  --
  If this helps you or answers to your question if it you please mark it as 'responded' or write it down, if other users can easily find it.

• 0 x 80041006 "a network occurred when communicating with the game server"

  Today I got this error message when you try to connect to Internet Spades - 0 x 80041006 "a network occurred when communicating with the game server".  Same thing happens with Internet Backgammon.  Has anyone else had this problem, nobody has found a solution please?

  Patti

  Hi Syed,

  I was able to access all aspects of the internet, only Internet Spades/Backgammon & checkers that are on my PC, all gaming sites like Yahoo & Pogo were available.  A few hours later everything was back to normal, so I think it may have been an error of site specific to these games.  Thank you for your advice I will hold firmly in case of future problems.

  Concerning

  Patti

• plugin VMware update manager returns with "the remote server returned an error: (404) not found."

  Hello

  We have recently updated our virtual Center Server to version 4 and now when I try to download and install from the page manager plugin vmware update manager plugin is back with "the remote server returned an error: (404) not found"

  Has anyone had this problem before and eventually worked out how to fix this?

  Gregg Robertson, VCP, MCSE, MCSA, MCTS, MCITP

  You are welcome!!

• Help associate .html files with the CF Server

  Hi people.
  
  Summary:
  I am looking for help with this error:
  "The Macromedia application server is inaccessible or it has no mapping to process this request."
  
  Details:
  I'm installing CF 7 on a Server 2003 with IIS 6 and I try to get the .html files to be treated as. CFM files.
  
  The CF Admin works very well, and when I call one. CFM page in my web directory, which also works fine to start.
  
  When I call a .html file, I get the error message:
  The Macromedia application server is inaccessible or there is no mapping to process this request.
  
  I have entered in IIS to the properties of the Web Site and the associated with the CF server .html files and restarting the server, and I still get the same error.
  
  I consulted my JRUN. INI files are entered:
  ignoresuffixmap = false
  
  But that no longer works.
  
  Any help is appreciated.
  
  Thank you
  
  Doug

  Assuming that you have correctly configured IIS (using Apache or be hacked), you need to make another change.

  1. Stop your web server and the CF.
  2. In C:\CFusionMX7\wwwroot\WEB-INF\web.xml , add:
     
     
     CfmServlet
     *.html
     
     
     CfmServlet
     * .html / *.
     
     
  3. Start your web server, then see

• I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  I just got a new modem (Arris SB6190) and now my Airport Extreme does not connect.  It worked fine with the previous modem (a rented one TWC).  Help!

  Always recommended to reset the airport back to settings by default and then set up again whenever you have a new modem or change your Internet Service provider.

  Turn off the new modem for at least 30 minutes. More is better.

  Perform a hard reset on the AirPort Extreme, then it turned off.

  Make sure that the Ethernet cable connects the modem to the "O" on the AirPort Extreme WAN port

  After the power of the modem 30 minutes down, turn on the modem and let it run for at least 5 minutes by itself.

  Then, turn on the airport and let it run a few minutes

  Set up AirPort Extreme again

  Important note... There are many reports of problems with the modem Arris SB and airports. Both are great products, but they do seem to work perfectly together for some users.