Problem with the stop action

Similar Questions

• PLS HELP I have a problem with the stop

  When I click on stop it only stop of the monitor but the computer still working pls I need help :(

  I'm using windows 7 ultimate 32 bit

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that the computer is not shut down correctly on the computer. I will definitely help you to resolve the issue.

  1. What is the brand and model of the computer?
  2. you receive an error message on the computer?

  Try to follow the suggestions and check if it helps to properly shut down the system.

  Method 1:
  If you have connected an external device, unplug them waiting for the mouse and keyboard and check if the problem occurs.

  Method 2:
  Step 1: Check if the problem occurs in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  If the steps above fail, then you can check the suggestions of the articles in the knowledge base.
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Method 4:
  You can check the latest driver for the display drivers are installed on the manufacturer's Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• After installing 10.11.4, problem with the stop.

  Hello

  My wife has an account on my computer.  If I try to a standstill through my account (while his account is connected), I get the dialog box saying "Enter admin password to close."  I expect this dialog box, however, when I enter my name and my password, it rejects the entry.  I am registered as an admin / owner.  I tried to run the disc utilities (which cost to fix the hard disk).  However, the problem persists.

  Thanks in advance.

  Is his Admin account as well? He can't let that.

• Kalonline-works until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking

  I play kalonline (RPG game), when to start the game it works up until I get the anti-piracy icon so stop saying: there is a problem with the function of anti-hacking. the program stops. I am the admin of it say kal computer run it in administrator mode and I did and I delete and reinstall the game. Solve the problem in win 7 by a right click and run as administrator, they wanted to work in win xp it all fits on how to solve this problem. These are the things, I was told to do to fix it.
  Hello

  It comes to KalOnline.

  Your error message can be corrected by following these steps:

  1. run KalOnline in Administrator Mode.

  2 uninstall KalOnline d_lete the entire Inixsoft folder, then reinstall the game.
  I did it and and it has not worked. then I was told that this was causing the problem

  Please check your computer system.

  This problem has occurred by a kind of problem of piracy.

  And if you have used a kind of memory-editing program, it could be happen too.

  So if your receipt similar to, then please remove it.
  I have none of these things on my computer. All I know is that people who have not updated windows xp can play the game and people who win 7 can play the game if they right click icon and run as administrator, that I still say side here but no way to prove it.

  Hello

  I suggest you to get in touch with the manufacturer of games and see if there are any other fix for this problem.

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  I can't add youtube video on my site (Muse response: there is a problem with the program and windows stops)

  Use the command search at the top of this page or follow this link: YouTube embedding continues to crash the app.

• Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add it or drag it immediately comes crashing windows, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add any

  Hi, I had problems with the addition of soundtrack to Adobe premiere elements 13. When I add or drag it happens immediately windows crash, where says "Adobe Premiere Elements has stopped working". I can add videos with no problems, but cannot add .mp3 files.

  I had Windows 8.1, 2.4 GHz, 6 GB of RAM. How to solve this problem?

  Fixed a problem when converting the mp3 file. WAV...

  some poor Adobe Premiere Elements if there is for example simple bug in the software.  Waste of money for this software.

• I have a problem with the download of Indesign CS 6 part 1 (Mac), it always stop at 6.8 MB download!

  As the title said, I have a problem with the download of Indesign CS 6 part 1 (Mac), it always stop at 6.8 MB download (about 1.2 GB). I tried to restart my mac, using the different browser but it's always the same result... Any help?

  Try this site

  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Problem with the installation of iOS 10

  I tried to install iOS 10 earlier but it did not work, so now that I'm trying to reinstall iOS 9 if my phone will work again, if this does not work I have to reset my phone (but I am a fool and did not a back-up because I never had a problem with the software updates in the past if all data will be lost).

  < published by host >

  The same problem with me too. After installing ios 10 nuer OTA my iphone brick! I'm trying to re - install ios 9 i-Tunes, but 2 hours now always stop installation... what happent?

• Hello! Someone has some problem with the haptic on Macbook 12 "2016 function? It does not work on my Mackbook.

  I'm trying to figure if someone has my problem with the haptic on Macbook 12 "2016 function. The option is checked in the preferences system, but it does not work.

  Thank you

  Hello luigi10m,

  Thanks for posting on the Community Support from Apple. From your post, it looks like your haptic feedback does not work when you click using your trackpad and the setting is enabled. I know that this is a great feature and it is important to make it work. I'll be happy to help you.

  First of all, I would like to assure you that in system preferences > Trackpad > clicking silencer is not checked, that might help. In addition, it would be useful to reset the settings of the SCM. You can find instructions here: reset the management system (SCM) controller on your Mac - Apple Support

  I'll also include those for you here:

  1. Stop the Mac.
  2. Plug the MagSafe or USB - C adapter to a power source and to your Mac.
  3. Use the built-in keyboard, press shift-control-Option on the left side of the keyboard, then press the power button at the same time.
  4. All the keys to unlock, then press the power button to turn on your Mac

  Take care!

• Satellite Pro L20-someone ' one can tell me if I have a problem with the screen?

  Hello

  I have a Pro L20 - PSL25E and I recently had problems with the screen, it was intermittently flickering/lose color and whiting almost (when the color fades white vertical lines begin to appear).
  This seemed to worsen after that I dropped it (only from about 2 feet off the ground, not a big drop).

  I thought that the sceen can go, but the performance of the laptop seems to be affected when this happens, the laptop started to run very slow (tracks mouse slowly, programs I clicked take ages to run and it freezes sometimes to stop flashing) that had me thinking that it might be a virus or performance problem.

  My screen, drivers are updated, I did a full scan with McAfee, ran a clear-up system and a Defrag.

  I was wondering if anyone knew if it seemed to be a problem with the connections of the screen and would need replacement or if it could be repaired or if it were a performance problem?

  Any help would be great thank you appreciate!
  Rebecca.

  Looks like the graphics chip has a problem, which I think is a motherboard replacement.

  You can get a quote for repair to an authorized service provider. There is a list of ASP on the Toshiba site.

• Satellite A660 - message: WARNING: a problem with the cooling system

  My laptop recenly started giving the error "Warning: a problem with the cooling system has been detected." Please turn off computer immediately and return it for service"- Yes the fan had stopped working and touchpad area was hot.

  So I take it on the type of service (toshiba) and must answer for fan, Mo, HARD drive, he said. Is this possible? -J' I have extended warranty, but is ' t it much? not to mention that it takes a month to get things down.

  He also mentioned that I could use the machine with a cooling pad until then if I wish.

  Any feed back?

  > Yes the fan had stopped working and touchpad area was hot.

  In this case, there is really a hardware problem.
  But I m wondering why he should replace the HARD drive and the motherboard
  Perhaps only the cooling module began at malfunction of course this is just a speculation
  If the technician has checked the material, then they need to know what parts are not OK.
  So don t think you have no choice.

  But the guarantee is valid for all is free

• Satellite P500-12D - a problem with the cooling system has been detected.

  Hi there everyone,

  I bought a Satellite P500-12D, which was a return of retail. When I start it up it runs a few minutes and then it appears on the screen:
  WARNING: A problem with the cooling system has been detected. Please, turn off computer immediately and return it for service.

  Follow the health of toshiba CPU is less than 50% temp and if it goes much higher that the cooling fan turns on and it lowers down and the fan stops again, I noticed that only the fan works r/h to cool the cpu, both should come together? What is a software problem?

  TThe unit is new without even the plastic off the surround screen or webcam. Any help or even point me in the right direction would be much appreciated, gary

  Hello

  Which program gives you this error message about the cooling system?

  Before contacting a service partner, as you can read in the error message, you must clean the cooling system using a jet of compressed air. Maybe dust blocking the fan or something else. Of more to clean up it of not necessary to disassemble.
  Here is an article on this topic: [how to clean a Toshiba laptop cooling system? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=40]

  If it doesn't help, contact the nearest service partner.

• Problems with the installation of recovery - Satellite A300D - BSOD

  Hello

  The laptop in question (TOSHIBA Satellite A300D) recently stopped starting (BSoD).

  So, I tried using the recovery disk, but there is no help. What happens is:
  -After about 10 minutes of waiting, the first language menu load, so I click on "next".
  - Then I again click Next and accept the message that my HARD drive will be erased
  - Then I see a cmd prompt that says "try to remove all the letters of partitions possible...". »
  -There is also a minimized command prompt that says something like "RAID failed to initialize."
  -And then nothing happens.

  Is this a hardware problem? I also tried a full installation (instead of recovery), which, even once, is simply not. None of the errors is - it just freezes.

  Any help appreciated.
  Thank you.

  It is not easy to tell what can be the problem, but if you were not able to install the OS by using two different facilities CDs/DVDs, so there must be a problem with the HARD drive.

  The warranty is still valid?
  I mean you can contact the nearest Toshiba authorized service provider and explain the situation. They can swap the HDD and again test the recovery procedure.
  Can you get somewhere 2,5 SATA HDD for testing?