After installing 10.11.4, problem with the stop.

Similar Questions

• Problem with the stop action

  Hello...

  I have a prblem makes me Mad... not really professional to the whip, I'm just beginning so I guess it's normal... Here's my number...

  I have the timeline with an animation, what I do is an entire website with pages on different frameworks... So far I put to the top of the intro page, everything works fine... I started to make buttons for navigation, the problem is, when I put a stop on the 1st action framework... the introduction clip no longer plays, but the button works fine and takes me to framework x with different content, so I tried to change and put the stop at the end of the opening sequence action What then happens is the introduction plays ok and stops but the button does not take me more search framework...

  I don't know if it can be of any help, but in case here is the action script that I use:

  btn_home.addEventListener (MouseEvent.CLICK, accueilliens);
  function accueilliens (e:MouseEvent): void
  {gotoAndStop (65);}
  }

  Could someone please help me understand what I am doing wrong? Thanks in advance

  Looks like you have more than one keyframe for the keys.  When you have a new keyframe, any code that has been assigned to the buttons must be reallocated.  If you have buttons on their own layer and not interrupt that their with new images keys, then you don't have to assign a code for them once.

• PLS HELP I have a problem with the stop

  When I click on stop it only stop of the monitor but the computer still working pls I need help :(

  I'm using windows 7 ultimate 32 bit

  Hello

  Thanks for posting the request in the Microsoft community forums!
  I understand that the computer is not shut down correctly on the computer. I will definitely help you to resolve the issue.

  1. What is the brand and model of the computer?
  2. you receive an error message on the computer?

  Try to follow the suggestions and check if it helps to properly shut down the system.

  Method 1:
  If you have connected an external device, unplug them waiting for the mouse and keyboard and check if the problem occurs.

  Method 2:
  Step 1: Check if the problem occurs in safe mode.
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After the adventures of shooting set the computer to start as usual by performing step 7 above of the Knowledge Base article.

  Method 3:
  If the steps above fail, then you can check the suggestions of the articles in the knowledge base.
  There is a delay when you stop, restart or log off a computer that is running Windows 7 or Windows Server 2008 R2

  http://support.Microsoft.com/kb/975777

  You can't do a computer that runs Windows 7 stops or sleep

  http://support.Microsoft.com/kb/977307

  Method 4:
  You can check the latest driver for the display drivers are installed on the manufacturer's Web site.

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-in/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• Problem with the Conexant HDAudio after installing x 86 Vista SP1

  I didn't want to start a new thread, but it seems that my problem is quite unique.
  
  When the first x 86 Vista install my speakers/headphones worked great. After Vista SP1 installed, my speakers/headphones went silent, but the pilot was still there and working properly. I uninstalled the driver and let Windows automatically install a different driver. (No Rollback was available) I could get the sound from my speakers. Speakers are the only thing that works if I plug into the headphone jack or not.

  When connected to the plug headphones I have test the headphones feature in playback devices and receive nothing in the helmet.
  
  Drivers of HP support only cut my speakers while doing my reading helmet camera disappear. Even with the updated driver.
  
  I like to use it as a TV computer and would like the sound of the TV via the headphone jack.
  
  I searched EVERYWHERE on the internet and found no resolution. Any help would be appreciated.
  
  HP pavilion dv6748us

  Conexant Audio
  
  Hardware ID:

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF & REV_1000

  HDAUDIO\FUNC_01 & VEN_14F1 & DEV_5051 & SUBSYS_103C30CF

  Have encountered problems with the card drivers its me on vista & 7 even when driver installation correct support downloaded installers.

  Only solution I found was to download a range of versions of different driver bought research google & trials, tedious but sometimes only way to get the result.

  If you uninstall the driver & restart it installs a generic driver audio Conexant or Windows!

  I also use my laptop with TV & hifi so work taken audio is a must (card input jack usb audio can be an option if)

  Also never rule out the fault of Council helmet as have a Pavilion & after that OS installed on a new drive HARD had no audio for headphones, pilot presumed linked, but after fiddling fuond twist got jack sound, turned Ribbon glued on card Board failed.

• I can not install Lightroom 6 after a problem with the pc and upgrade to Windows 10. "Errors occurred on your installation.

  Hello

  I am a user of Lightroom 4 since it came out and it worked fine.

  My system is based on a motherboard Asus Maximus III, the Intel Core i7 875K 2.93 GHz processor, card EVGA Geforce GTX 960 Graphics, Corsair Vengeance 8 GB of RAM.

  I used to have Windows 7 Home Eng 64 bit on it.

  After installing Lightroom 6 everything is fine again, but then the evil came:

  There was a problem with the pc, so I had to use the restore before installing Lightroom 6 point, bringing back me to Lightroom 4

  The problem is that somehow my internetbrowsers stopped working one by one. A virus? Norton was running, so it shouldn't.

  The restoration of an early version did not help the problem

  I needed the PC for work so I installed the free update for Windows 10

  Now, I can not install my Lightroom 6 more: it keeps giving me the following box:

  

  Of course stop the firewall did not help. Looks like a standard sentence as well.

  How to solve this?

  Thank you for reading.

  Settle in the right forum.

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• Problem with the Package Windows Installer... when trying to install ITUNES 9.2 and Quicktime.

  I bought an IPHONE 4 yesterday.  For more than 7 hours, I tried everything to download ITUNES 9.2.  I get the same error.  I spoke with apple as Microsoft.  I didn't PAY to get assistance from Microsoft yet and I hope I don't have to.

  Error: problem with the Windows Installer Package.  A program required for this install to complete could not be run.  Contact your provider to support personal or package.

  I have Windows XP.  I uninstalled and re-installed Safari and which did not help (at one point, I had problems with Safari).  I also have at one point received an alert on 'applesync.notifier' could not be executed.

  I have no idea where from here, but I'm frustrated.  I want to use my phone for something more than "just a phone" and I can't.  I have to carry my OLD Iphone (1st generation original).  Help<><>

  There is a simple way to do it!

  I had this problem too, but I did

  first open Installer u then let it install

  When you get the messege, click ok and it will say restoration of action but don't get put off by this cause after 5 min, it will say: it is installed and restart your computer

  hope this has helped

• Problem with the redirection email Yahoo after installation of nine updates

  Original title: problem with transfer of emails after having installed new updates

  I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account. When I get the Outbox until you find at least half of the time the "add recipients" does not work despite all the efforts, which means that I would put in manually email addresses (long and painful). My windows mail forwarding system seems to work OK. -Wood Marcus * address email is removed from the privacy *

  Hello

  1. What were the updates that have been installed on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  2. don't you configure e-mail account Yahoo BT in any e-mail client? Example: Outlook, Windows Mail.

  3. you use Internet Explorer to access BT Yahoo mail account?

  If you have configured the account BT Yahoo mail on the mail client, post of additional information to help you more away or well you could contact Yahoo Mail Support forums to help you best. Check out the following link.

  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• Reinstalling windows 7 ultimate retail after changing the SSD, the motherboard and the processor. I'm having a problem with the reactivation?

  I'll upgrade my desktop PC, by changing the motherboard, processor and SSD drive with the OS on it to boot. I have a problem with the reactivation of windows, and should I turn it off, somehow first, or the previous version will be considered as-enabled automatically? It is a retail, windows 7 64 ultimate version. Please advise, thanks in advance.

  Just reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  Remember, if it is a retail upgrade license:

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  You can skip to enter the product key and try the activation of the phone to work around this problem.

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Problems with the touch screen of HP all-in-One after upgrading Windows

  I recently updated my version of Windows (64-bit) with system updates and then a full version updated to version 8.0 version 8.1.  After the update is complete, I started to experience a strange problem with the touch screen on my HP Envy Rove.  The screen would flash repeatedly one set of points in the right lower quadrant of the screen as if the simulation random screen button.  There is no way to stop this.  If the screen on a keyboard was pulled up, letters in the place of the flashes would be broadcast in the fields on the screen.

  The only way to stop the flashes of screen has been to go into the Device Manager and disable the HID-Compliant device driver.  It stopped (system generated keys) flashes, but also disabled my touch screen input.  So now the system is usable, but without the benefit of the touchscreen.

  Here is the information on the driver:

  HID-Compliant device

  Date: 21/06/2006

  Version: 6.2.9200.16851

  (input.inf)

  I tried updating the driver, but this seems to be the latest version available.  Go back to the previous version of the driver, could solve the problem, but I could not locate on the support web site.

  Any suggestions on how to solve this problem and re-enable the ability of my touch screen?

  Hello

  Downloaded drivers from the manufacturer will be the most tested and up to date available. The best place to download a driver is directly from the manufacturer of the equipment.

  So I suggest you to install the driver that is available on the HP website for your model.

  Troubleshooting of touch screen in Windows 8

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c03488148

  Just reply with the results.

• I had problems with the application Manager Update, then I was instructed to re - install the product now I can not install I get the error

  Cs6 bought for more than a year, and recently had problems with the application manager, then I was instructed to re - install the product now I get errors after downloading to install it, so now I don't have cs6 on my computer, I can't go to adobe as I keep getting palmed to do that and the next thing , why can't I talk to someone why my program is not installed.

  It's ok now, I used the creative cloud cleanser and then tried to install again and bingo! everything fine now, thanks anyway

• Problem with the touchpad after upgrade to Windows Vista

  After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?

  Can U help me!

  Maybe when you tell us what model of laptop you have. ;)

• ThinkPad X 230 Windows 7-64: problems with the screen after updates

  Hi all

  I have a problem with the Thinkpad X 230. After a recent update of Windows 7 (64-bit), the screen resolution is set to 800 x 600 and brightness to the minimum. FN + F8/F9 does not work. The brightness is uncontrolled. I had to restore the system before the update.

  How to solve the problem, do anyone know?

  Thank you!

  Isosik

  Hi Isosik,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with the display resolution on your ThinkPad X 230.

  If you have updated the drivers from Windows update, sometimes this kind of problem occurs with windows generic drivers for cause of driver incompatibility, suggest always update drivers only via the ThinkVantage System Update utility. Update only the application of Microsoft Windows Update.

  You can also manually download the drivers from the Lenovo support site.

  Lenovo support site.

  I hope this helps.

  Best regards

  Agnes Kumar

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus