Problem with the text of the label will not change properly.

Similar Questions

• 7 error "Paris 7.2.241.1enRegInstaller.exe of work and has been closed." A problem with the application to stop functioning properly. Windows will notify you if a solution is available.

  Original title - 7.2.241.1enRegInstaller.exe

  Hello.

  Today, JUST after I "Set Windows to update," twice, I got the disconcerting message:

  "Paris 7.2.241.1enRegInstaller.exe of working and was closed".

  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. »

  Any wisdom or experience with this?  I'm on a 64-bit HP Pavilion older (dv7-1245dx) with this OS JUST-update Windows (Vista Home Premium).

  Thank you.

  GIES W

  The solution has been found just uninstall bing bar, restart the computer, and if you want just bing toolbar to reinstall. This easy solution my system fixed.  Bing has again reminded all my points that I have amassed

• I have a problem with the DVD drive not detected on Windows 7.

  I built a new PC (I've built a few of them).  This time is not considered my ASUS BD player with Windows 7 DVD burner.  It is not in either Device Manager just do not at all recognized.  The BIOS for the ASUS P9X79 of luxury see the SATA drive without problem.  Sometimes after restarting the BD Player looks and functions perfectly, but when the computer goes to sleep or shuts down is usually not there when it is restarted.  Please help me solve this problem :-)

  Original title: optical drive not recognized...

  Hello

  Please contact the Microsoft Community.

  You have a problem with the driver DVD being missing on the computer. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) that you get an error message or error code?

  (2) did you have performed the steps in troubleshooting?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method 1-

  I wish that you are running the fixit-

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2-

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.
  Back up the registry - http://windows.microsoft.com/en-US/windows7/Back-up-the-registry

  I would have you look at the article-

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116#top

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• HP Support Assistant unable to fix a problem with the CD/DVD not detected

  I have a G42-415DX laptop and I can not read cd/DVD, it was working fine 3 weeks ago and now nothing / I tried the support assistant and he could not solve the problem.  I got a message saying the driver must be reinstalled, how do I reinstall the driver?

  Hello

  If you do not get the chance to use another PC, I would definitely create the CD and the DVD bootable as it would give a clear indication if there is a hardware problem with the optical drive.

  In the meantime, try following the procedure in the title of the subheading "Let me fix it myself" on the link below to remove upper and lower filters (if these registry keys exist) and see if that helps the issue.

  http://support.Microsoft.com/kb/982116

  If find you the following registry keys and delete them, restart the laptop before checking the disc.

  Kind regards
   
  DP - K

• Developer SQL 2.1: problem with the dialog box to change the display

  I am running Version 2.1.0.63 on Windows XP SP3.
  
  When I open an existing view and make changes in the change display dialog box and then click on the button OK the dialog box remains open and the view is not changed.
  
  This user has Create View privileges and can run CREATE or REPLACE the sql statement to change the view. The same view of edition having the same user works very well in Version 1.5.3.
  
  Someone else has a similar problem?
  
  Thank you.

  It's a bug, the following exception is raised:

  Exception occurred during event dispatching:
  oracle.javatools.db.ddl.UnsupportedDDLException: Cannot update VIEW MADREMIA with the given changes using ALTER statements.
          at oracle.javatools.db.ddl.DDLGeneratorImpl.getUpdateDDLImpl(DDLGeneratorImpl.java:480)
          at oracle.javatools.db.ddl.AbstractDDLGenerator.processResultSet(AbstractDDLGenerator.java:148)
          at oracle.javatools.db.ddl.AbstractDDLGenerator.getUpdateDDL(AbstractDDLGenerator.java:110)
          at oracle.javatools.db.ddl.DDLDatabase.appendUpdateDDL(DDLDatabase.java:661)
          at oracle.javatools.db.ddl.DDLDatabase.updateObjects(DDLDatabase.java:556)
          at oracle.ide.db.dialogs.CascadeConfirmDialog.updateObjects(CascadeConfirmDialog.java:111)
          at oracle.ide.db.panels.TabbedEditorPanel.commitToProvider(TabbedEditorPanel.java:357)
          at oracle.ide.db.panels.TabbedEditorPanel.onExit(TabbedEditorPanel.java:246)
          at oracle.ideimpl.db.panels.TraversableProxy.onExit(TraversableProxy.java:62)
          at oracle.ide.panels.TDialog$L.vetoableChange(TDialog.java:104)
          at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:335)
          at java.beans.VetoableChangeSupport.fireVetoableChange(VetoableChangeSupport.java:252)
          at oracle.bali.ewt.dialog.JEWTDialog.fireVetoableChange(JEWTDialog.java:1472)
          at oracle.bali.ewt.dialog.JEWTDialog.dismissDialog(JEWTDialog.java:1502)
          at oracle.bali.ewt.dialog.JEWTDialog$UIListener.actionPerformed(JEWTDialog.java:1894)
          at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
          at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
          at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
          at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
          at javax.swing.plaf.basic.BasicButtonListener.mouseReleased(BasicButtonListener.java:236)
          at java.awt.Component.processMouseEvent(Component.java:6263)
          at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
          at java.awt.Component.processEvent(Component.java:6028)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
          at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
          at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
          at java.awt.Container.dispatchEventImpl(Container.java:2085)
          at java.awt.Window.dispatchEventImpl(Window.java:2475)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:178)
          at java.awt.Dialog$1.run(Dialog.java:1045)
          at java.awt.Dialog$3.run(Dialog.java:1097)
          at java.security.AccessController.doPrivileged(Native Method)
          at java.awt.Dialog.show(Dialog.java:1095)
          at java.awt.Component.show(Component.java:1563)
          at java.awt.Component.setVisible(Component.java:1515)
          at java.awt.Window.setVisible(Window.java:841)
          at java.awt.Dialog.setVisible(Dialog.java:985)
          at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:395)
          at oracle.bali.ewt.dialog.JEWTDialog.runDialog(JEWTDialog.java:356)
          at oracle.ide.dialogs.WizardLauncher.runDialog(WizardLauncher.java:55)
          at oracle.ide.panels.TDialogLauncher.showDialog(TDialogLauncher.java:225)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.launchDialog(BaseDBEditorFactory.java:623)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:368)
          at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:332)
          at oracle.ide.db.dialogs.BaseDBEditorFactory.editDBObject(BaseDBEditorFactory.java:54)
          at oracle.ide.db.dialogs.AbstractDBEditorFactory.editDBObject(AbstractDBEditorFactory.java:314)
          at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.editObject(DatabaseNavigatorController.java:470)
          at oracle.dbtools.raptor.navigator.DatabaseNavigatorController.handleEvent(DatabaseNavigatorController.java:308)
          at oracle.ide.controller.IdeAction.performAction(IdeAction.java:531)
          at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:886)
          at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:503)
          at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1995)
          at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2318)
          at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:387)
          at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:242)
          at javax.swing.AbstractButton.doClick(AbstractButton.java:357)
          at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1225)
          at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1266)
          at java.awt.Component.processMouseEvent(Component.java:6263)
          at javax.swing.JComponent.processMouseEvent(JComponent.java:3267)
          at java.awt.Component.processEvent(Component.java:6028)
          at java.awt.Container.processEvent(Container.java:2041)
          at java.awt.Component.dispatchEventImpl(Component.java:4630)
          at java.awt.Container.dispatchEventImpl(Container.java:2099)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4574)
          at java.awt.LightweightDispatcher.processMouseEvent(Container.java:4238)
          at java.awt.LightweightDispatcher.dispatchEvent(Container.java:4168)
          at java.awt.Container.dispatchEventImpl(Container.java:2085)
          at java.awt.Window.dispatchEventImpl(Window.java:2475)
          at java.awt.Component.dispatchEvent(Component.java:4460)
          at java.awt.EventQueue.dispatchEvent(EventQueue.java:599)
          at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:269)
          at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:184)
          at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:174)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:169)
          at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:161)
          at java.awt.EventDispatchThread.run(EventDispatchThread.java:122)
  

  Bug 9199263 has been filed for this, but apparently it wasn't a showstopper for the production. It may be set in one of the upcoming patches...

  Kind regards
  K.

• Background color in the body will not change

  Hello

  The background color in 'body' will not change. I even tried to change it to "reset" and it didn't work either. But I can change the color in 'wrapper' etc. Someone has an idea what could be the problem?

  / Milda

  / * Global * /.
  HTML {}
  Body {background-color: #E7E0C9;}
  }
  

  / * Containers * /.

  #wrapper {width: 900px; auto margin: 0; background-color: #FFF ;}}

  Wrong code in the header of your document somewhere.  Run your page through the validator and fix errors that occur.

  http://validator.w3.org/

• Having a problem with the message saying (not answer) and computor lock, answers please

  Problem with computor saying "not responding" and lock, any ideas please.

  Problem with computor saying "not responding" and lock, any ideas please.

  Provide you any other information.  You have to give to get when it comes to troubleshooting.

  Given that don't even give you an operating system - replace the defective hardware.  ;-)

  What specific operating system you use?  Include the service pack level and architecture (SP1, SP2, SP3... (32 - bit or 64 - bit?)

  I'm guessing that has happened since the first day - of a lifetime of computers - what happened between he works and does not?  New software installed?  All new hardware installed or attached?

  Did you * nothing * to try to remedy the situation?  If so - what?

  Be specific.  Ignore the cameras, microphones and remote viewing software, we have installed in your home, clothing and computer.  Pretend that we do not understand what you do and save it for future reference.  * smile * (should be easy - we don't have).

  Stuff in general, you could do (as long as you use a Microsoft Windows Operating System after the year 2000...)

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Update your drivers for hardware devices from the manufacturer themselves - do not use the built-in features of Windows. If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Hello! I have a problem. The year will suddenly change Windows XP... Sometimes when I start the computer is the year 2095 chnged. What can I do about it?

  Why id the year change in windows XP?

  Hi Trubbe,
   
  Start with the setting of the time zone to the time zone where you live. Make sure then that "automatically adjust for DST' is checked.
   
  For more information, see:
  Time zones and time of e-mail
   
   
  Which will probably fix the problem.
   
  However, here are two other things to consider:
   
   
  a. check your "input output system BIOS (Basic)" by going to the configuration to the computer he start.  Make sure that time is also set to what you want to be. Consult the manual for the computer to do the same thing.
   

  NOTE: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from configuration can resolved BIOS/CMOS settings. Changes to settings are at your own risk.

   
  b. make sure you have all the patches of Daylight Savings Time installed.  Since we are in the period that would normally be DST in any case, it is probably NOT part of the question, but it's a good belt/suspenders approach to take.

• I have a problem with the password is not eligible not on computer.

  Original title: password problem

  I have a toshiba laptop and when I put in place I used the same username and password on all so one day I went to get my desktop to defragment my computor and my password does not work but it always works for everything but don't know I can't do anything that you have to admid clearance for help me

  Hello

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  And this is the Information from Microsoft on the problems of passwords;

  You will need to borrow a Microsoft DVD from a friend, Recovery DVD a manufacturer without these special work options available.

  • http://support.Microsoft.com/kb/940765

  If you are unable to connect to Windows 7 or Windows Vista, you can use the Windows Vista System Restore feature, or the Windows 7 system restore feature.

  You may be unable to connect to Windows Vista or Windows 7 in the following scenarios:

  • Scenario 1: You recently set a new password for the protected administrator account. However, you don't remember the password.
  • Scenario 2: You type the correct password. However, Windows Vista or Windows 7 does not accept the password because the system is damaged.
  • Scenario 3: You delete a protected administrator account. Now, you cannot connect to another administrator account.
  • Scenario 4: You change an administrator account protected with a standard user account. Now, you cannot connect to another administrator account.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  "What to do if you forget your Windows password"

  http://Windows.Microsoft.com/is-is/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

  "If you forget the administrator password, and you do not have a password reset disk or another administrator account, you will not be able to reset the password. If there is no other user account on the computer, you will not be able to log on Windows and you need to reinstall Windows. »

  If none of the above applies to you or work for you, you need to reinstall the operating system.

  See you soon.

• Problem with the laptop does not connect to wifi.

  I have a new laptop to windows 8 toshiba still in the menu setup and he asked me to choose my wifi so I did and put the password and its says unable to connect to wifi, all other laptops and tablets are connected to wifi I chose but its only the my laptop which does not connect. What should I do?

  Hello

  1 have had any changes made on the computer before the show?

  2. do you get an error message? If Yes, what is the exact error message?

  To solve the problem with Wi - Fi internet access, you can follow these methods:

  Method 1:

  I suggest you to refer to the article and see if it helps:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows-8/fix-network-adapter-problems

  Method 2:

  I suggest to refer to article and follow these steps:

  Wireless and wired network problems

  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  Let us know the results. If you have additional questions on the computer, please ask your question about Windows and we will be happy to help you.

• I'm having a problem with the tabs is not responding after deleting localstore.rdf

  After the 4.0 update b7, I had a problem with my toolbar to reset and (a little), I corrected by deleting localstore.rdf. Now, however, my tabs do not respond when you click them, and Firefox is essentially locked on the first tab ideas?

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of your modules is causing your problem (switch to the DEFAULT theme: Tools > Modules > themes).

  • Makes no changes on the start safe mode window.

  See the extensions, themes and problems of hardware acceleration to resolve common troubleshooting Firefox problems and troubleshooting questions with plugins like Flash or Java to solve common Firefox problems

  Create a new profile as a test to see if your profile is the source of the problems.
  See basic troubleshooting: a new profile

• Problem with the PXI-6534 elimination change detection task

  I ran into the following problem.  I use a PXI-6534 and PXI-6602 with vb.net for detection with a timestamp of changes.  My code works fine and I get data exactly as I want, the problem comes when I try to call the task.dispose function.

  When I call him has, she throws an exception with error-200088 code, task does not exist.  But the task is still stopped and I can run my code again and everything works fine.  If I do not call the task.dispose, I get an error when I try to run my code again.  The material seems to have left in an unknown state, and I have to restart my computer to get it back. (the MAX NOR even reset the 6602, he says only that the Council does not exist).

  Interesting also is the exception thrown does not seem to be caught by the Try Catch method.  The code traverses the Try Catch without any problem (step by step in the code anyway), but with the exception, the message box appears, either immediately or when coming out of the subroutine.

  Also, I use TestStand 4.2 to call these functions, if that makes a difference.

  Any help would be greatly appreciated!  Its very frustrating that everything works and I get my data perfectly, but I can't run the code without exception popping up, and I can't seem to catch the exception.

  Here is the code I use:

      Public Sub StartChangeDetect_UUT1()
          If myCDrunningTaskA Is Nothing Then
              Try
                  ' Create the task
                  uut1ChangeDetectTask = New Task()
  
                  '************************ Create the digital input virtual channel alias
                  'Assign ports to digital virtual channel
                  uut1ChangeDetectTask.DIChannels.CreateChannel("Dev1/port0:3", "ChangeDetectUUT1", ChannelLineGrouping.OneChannelForAllLines)
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterEnable = True
                  'uut1ChangeDetectTask.DIChannels.All.DigitalFilterMinimumPulseWidth = 0.000001
                  uut1ChangeDetectTask.DIChannels.All.InvertLines = True
                  uut1ChangeDetectTask.DIChannels.All.DataTransferMechanism = DIDataTransferMechanism.Dma
  
                  'Assign ports to monitor for change detection, both rising and falling edges
                  Dim rising As String
                  Dim falling As String
  
                  rising = "Dev1/port0:3"
                  falling = "Dev1/port0:3"
                  uut1ChangeDetectTask.Timing.ConfigureChangeDetection(rising, falling, SampleQuantityMode.ContinuousSamples, 4000000)
  
                  'export change detect event to PXI backplane so we can get timestamps from timer.
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventOutputTerminal = "/Dev1/PXI_Trig0"
                  uut1ChangeDetectTask.ExportSignals.ChangeDetectionEventPulsePolarity = ChangeDetectionEventPulsePolarity.ActiveHigh
  
                  'uut1ChangeDetectTask.Stream.Timeout = 20000
  
                  ' Verify the Task
                  uut1ChangeDetectTask.Control(TaskAction.Verify)
  
                  ' Set up the data table
                  Initializeuut1DataTable()
  
                  ' Create the readers for the DI and the CI
                  uut1ChangeDetectReader = New DigitalSingleChannelReader(uut1ChangeDetectTask.Stream)
  
                  uut1CDCallback = New AsyncCallback(AddressOf uut1ChangeDetectCallback)
                  uut1ChangeDetectReader.SynchronizeCallbacks = False
                  ' Set up our first callback
  
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
                  myCDrunningTaskA = uut1ChangeDetectTask
  
                  'Set up Timer for time stamp
  
                  uut1TimeStampTask = New Task()
                  '****************set up PXI-6602 timer to get buffered change events.  ie capture timer output on  the PXI_Trig0
                  'we can then correlate this timer capture buffer to the change detect buffer to get the time stamps
  
                  uut1TimeStampTask.CIChannels.CreatePeriodChannel("Dev5/ctr0", "TimeStamp1", 0.0000001, 0.02, CIPeriodStartingEdge.Rising _
                               , CIPeriodMeasurementMethod.LowFrequencyOneCounter, 4, 4, CIPeriodUnits.Seconds)
                  uut1TimeStampTask.CIChannels.All.CounterTimebaseRate = 20000000.0
  
                  'Use exported change detect from 6534 board to take counter sample
                  uut1TimeStampTask.Timing.ConfigureImplicit(SampleQuantityMode.ContinuousSamples)
                  uut1TimeStampTask.CIChannels.All.PeriodTerminal = "/Dev5/PXI_trig0"
                  'uut1TimeStampTask.CIChannels.All.DuplicateCountPrevention = False
                  uut1TimeStampTask.CIChannels.All.DataTransferMechanism = CIDataTransferMechanism.Dma
  
                  ' Set timeout
                  'uut1TimeStampTask.Stream.Timeout = 20000
                  ' Verify the Task
                  uut1TimeStampTask.Control(TaskAction.Verify)
                  uut1TimeStampReader = New CounterReader(uut1TimeStampTask.Stream)
                  uut1TSCallback = New AsyncCallback(AddressOf uut1TimeStampCallback)
  
                  uut1TimeStampReader.SynchronizeCallbacks = False
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampTask)
                  myTSrunningTaskA = uut1TimeStampTask
  
              Catch exception As DaqException
                  ' Display Errors
                  MessageBox.Show(exception.Message)
                  uut1StopChangeDetection("C:\PT3771\TestResults\")
              End Try
          End If
      End Sub
  
      Private Sub uut1ChangeDetectCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myCDrunningTaskA Is uut1ChangeDetectTask Then
                  ' Read the available data from the channels
                  Dim data As UInt32() = uut1ChangeDetectReader.EndReadMultiSamplePortUInt32(result)
  
                  Dim b As UInt32
                  For Each b In data
                      ' in TestData waveform Y axix is data, x axis is time 
  
                      uut1TestData.SetY(uut1ChangeDataIndex, b)
                      uut1ChangeDataIndex += 1
  
                  Next b
  
                  '' Set up a new callback
                  uut1ChangeDetectReader.BeginReadMultiSamplePortUInt32(-1, uut1CDCallback, uut1ChangeDetectTask)
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'DigitalCallback
  
      Private Sub uut1TimeStampCallback(ByVal result As IAsyncResult)
          Try
              'If runningTask Is ar.AsyncState Then
              If myTSrunningTaskA Is uut1TimeStampTask Then
                  ' Read the available data from the channels
                  Dim data2 As Double() = uut1TimeStampReader.EndReadMultiSampleDouble(result)
  
                  ' in TestData waveform Y axix is data, x axis is time
                  Dim b As Double
                  For Each b In data2
                      uut1TimeSum = uut1TimeSum + b
                      uut1TestData.SetX(uut1TimeStampIndex, uut1TimeSum)
                      uut1TimeStampIndex += 1
                  Next b
  
                  ' Set up a new callback
                  uut1TimeStampReader.BeginReadMultiSampleDouble(-1, uut1TSCallback, uut1TimeStampReader)
  
              End If
          Catch exception As DaqException
              ' Display Errors
              MessageBox.Show(exception.Message)
              uut1StopChangeDetection("C:\PT3771\TestResults\")
          End Try
      End Sub 'CounterCallback
  
      Public Sub uut1StopChangeDetection(ByVal location As String)
  
          Try
              If Not (myTSrunningTaskA Is Nothing) Then
                  uut1TimeStampTask.Dispose()
                  myTSrunningTaskA = Nothing
  
              End If
  
              If Not (myCDrunningTaskA Is Nothing) Then
                  uut1ChangeDetectTask.Dispose()
                  myCDrunningTaskA = Nothing
  
              End If
          Catch ex As Exception
              MessageBox.Show(ex.Message)
          End Try
  
          uut1TestData.UpdatePointCount()
          uut1TestData.SaveToDisk("C:\PT3771\TestResults\uut1TestWaveFile.csv")
          uut1TestData.SaveToDiskBinary("C:\PT3771\TestResults\uut1TestWaveFile")
      End Sub 'StopTask
  

  Joe,

  Last updated.  It seems that when the task.dispose is run, recalls seem to have called one last time.  I took the call to the stopUUT1ChangeDetect in the two recalls (so eliminate it would not enforce a second time), and no exception was thrown.

  Thanks for your help!  Although if you'd still answer my question on the PXI-6534 Digital input filtering, I'd appreciate it.

  Thanks again.

  Thad

• Windows Vista Home Basic - problem with the icons does not meet various Windows services after trying to download updates

  I use Windows Vista Home Basic on a Dell Inspiron 1501.  I have recently accepted that some guest downloads Windows with terrible results.  First downloads do not appear to have been accepted and the system of guard stop and startup trying to cancel.  Second as I result, I seem to have lost access to a range of Windows tools.  For example in Panel I can't open system icons or Windows Update.  Nor can I access these services from any other avenue on the computer.  Whenever I have find an icon or a file screen flashes a dialog briefly and then disappears.  The effect of this is that I'm completely unable to access or to implement the recommended tools or services that could solve this problem.  My ability to manage my computer has been reduced to zero.  Dell were not receptive and I can't get a response from Microsoft

  worm post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  One thing you can try try the system restore, safe mode.

  Start the computer in safe mode with networking capabilities (hold DOWN F8 while the computer starts).

  To start your computer in safe mode, you can check the link below:http://windowshelp.microsoft.com/Windows/en-US/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx>

• I have a problem with the Bitlocker does not not after entering the password.

  Original title: my bitlocker encrypted Drive not respoding after entering the password.

  Hello

  I tried to block my external hard drive with bitlocker, but unfortunetly got encryption interrupted before finishing because I accidentally unplugged the hard drive, I use windows 7... And now when I enter the password the bitlocker stops responding until I unplug the external drive, I tried to decipher the drive using bitlocker repair tool in cmd, but she also is stuck at 29% every time if I managed to get some data back but not my whole data.

  , I just want to know that is there any way to recover my entire data or unlock the drive?... .Please help!

  Thank you

  I'm sorry to say, but you have made two big mistakes:

  (a) you forgot to backup your data regularly, e.g. once per week.
  (b) you have not backed up your data before making a major change, such as when your data encryption.
  There is a small chance that you can repair the damage with the found here BitLocker Repair tool:
  http://TechNet.Microsoft.com/en-us/library/ee523219 (WS.10) .aspx
  If this isn't the case, then you will have to deal with this disaster as a harsh reminder that regularly back up the files is not an option but a 'must '.

• Problems with the campaigns do not send emails once active!

  Again this morning another one of our users has 3 time very distinct sensitive campaigns do not come out once activated.

  I think the problem lies in the segment element. If you make changes or perhaps too many changes to the segment once its on the Web

  It seems to mess up somehow in the backend config!

  Anyone encounter this problem or knows what I can do to solve this problem for my users? For obvious reasons, this is a major problem.

  Thank you all!

  Sort of... It may just be that Eloqua has a hicup causing a little late... It may be my users do something strange inside the segment that breaks.

  When it comes to a campaign I created... I guess it was just a hicup. Great, I know. But if it happens once on 500 campaigns, I'll be ok with that. We had this same report with our internal e-mail system that we built ourselves.

  Also, these problems were because the user did something wrong with the list.