Problem with the TOC numbering

Similar Questions

• Problem with the serial numbers on the laptop?

  I have CC on my desk at work with a composition of the team, I was told that I could use this subscription even on my laptop at home to work at home. However, when I downloaded the CC and the programs I need, whenever I try to open a program, it tells me I need a valid serial number, who said an administrator at work that it was not necessary and should be a problem with the other adobe programs I. I recently reformatted my computer and only Adobe products, I think I would have left perhaps are pdf reader and flash for Web sites.

  Hi linphoang,

  I checked your account of the CTC, you have nt yet accepted the invitation send you in your mail.

  Please check the Inbox, spam, unwanted of email & accept the invitation.

  Once the invitation is accepted, please launch any product & the license of the software, identify yourself & it will be activated.

  Hope this works for you.

  Kind regards

  Baudier

• Problems with the page numbering

  Hello there ' All!

  I received a few questions about the numbering of the pages:

  1. When the notes are present, they appear over my page numbers (in the lower left corner), which makes them invisible. How to avoid this?
  2. How can I ignore numbering for some pages, as the cover page, table of contents etc. ?
  3. How can I connect page numbers in my table of contents to my actual page numbers?
     

  Thank you!

  1A, ill-conceived layout? Page numbers should ideally be placed on your master pages, and outside of the margins, you book to plain text (i.e., top, side, or underneath the purple square). Move the frames of page number outside the place of purple Director. If there is no room for this, you need to adjust your margins!

  2. you can 'ignore' the page numbers (they will keep existing), but you can hide them in several different ways. Easier - and more dirty - trick is to put a white rectangle on them (don't do this!). You can also (Cmd) Ctrl + Shift + click on any element on a master page, so "free him" and then just delete the entire frame, with the page number and everything (I wish you didn't do this...). The best way is to assign a new master page to only those pages; a specially created for this purpose (if you have other elements that should appear on all pages), or simply the "[None]" blank page.

  3 search 'referrals' help if you use CS4. You can also search for "Table of contents", it may be useful to regenerate all the content, so the text is up-to-date as well.

• I have a problem with the numbers. Help, please!

  I have a problem with the numbers. I am trying to create a formula that can add a cell only when another cell with a pop-up menu returns on a specific pop.  I can't ignore the cell if it is not on specific pop upward.

  assuming the cell with pop's cell A1

  and if the context menu contains items:

  YES

  NO.

  MAYBE

  and the value you want to add in cell A2

  You can add the value in cell A2 when the context menu is 'YES' like this

  = if(A1="YES", A2, "") +.

  where is the expression that adds other cells if you want

  could be another cell

  = If (A1 = "YES", A2, "") + B2

  or a range of cells

  = If (A1 = "YES", A2, "") + sum (B2, D2, G2:H5)

• Problem with the numbers in the rows of cut and paste

  Hey,.

  I'm new to MAC and now have problems with the help of figures, I brought my windows Excel worksheets. On windows, I could cut a line and paste anywhere on this page and by practice that Excel would fill the void rank where I cut the content. but here on MAC it does not work, why?

  anyway I tried to live with it by cutting a line and for the collage, I used Insert > copied lines for paste swath and add a line for her. but last night I updated the numbers and now by the practice precedes the Windrow is stuck this time with a resized form, the line is resized to a big line.

  Why is this happening? If it can't be fixed, I can go back to a previous version of a number? This update of hate.

  Numbers is excellent NO then you should consider to guide your expectations.

  Cut number refers only to the content NOT the line, or cells.  Select when a row, and then use the cut command that you cut the contents of the cells.

  If you try to move a line from one place to another, you should try this method (which can work for you)...

  Select the line, then click and hold on the header line (up to the line "lift" on the table), the operation slide the line to the destination.

  

  Now drag the line:

  

  Now drop the line where you want to:

  

• My camera has reached 9999 photos and started renumbering 0001 but in a different folder.  If I import new photos in iPhoto, the older photos with the same numbers are overwritten?

  My camera is renumbering pictures from 0001, but a new camera case.  If I import new photos in iPhoto, they replace the old photos with the same numbers?  The camera knows that they are in a different folder, but what happens when I import into iPhoto?

  iPHoto manages very well duplicate file names - each import is in another folder in the database - no problem

  LN

• Problem with the software Modem on Satellite Pro L40

  I tried to set up a connection Dial-Up Networking on a Satellite Pro L40 running Vista and can't get the modem to talk to the modem from the ISP. The connection appears OK and then you can hear the modem dial, but when the ISP picks up there is a bit of yelling and then my modem abandons the connection and I get the standard vista connection failed box.

  Things I've tried:
  -latest drivers for the 2.1.77.0 modem (and the rest of the system) downloaded from Toshiba and installed OK
  -all the updates of windows installed
  -removal of the modem in the Manager of peripherals and re - install
  -suppression of the agrsmdel.exe and then re-install
  -try different cables to plug into the phone jack
  -several different ISPS and phone numbers
  -reduce the maximum speed of the connection
  -connection to the same ISP with my Satellite L10; works very well never have time!
  -using the windows to diagnose and repair the tool (set last resort!); says that the modem works fine and can not find a problem with the connection

  Is it possible that the update of the BIOS on the laptop would make a difference (currently v 1.60)? I did some research on Google and found messages on various forums, which suggests that the connection between the motherboard and the modem chip is a little doubtful for all the Agere Soft Modem; If the case is it something I can fix myself or I should go for warranty repair?

  Midders

  Hello

  I'm sure that there is no problem with your modem, but with the configuration or even s ISP modem. I recommend you to speak with the support of the ISP.

• Problem with the published parameters between the movement of FCPX

  Hello

  I have a little problem with the settings published between the movement at FCPX.

  For some reason, the published parameters have different values within FCPX in movement.

  For example, in motion, a parameter is - 187.04 and in FCPX is-0,19. What are the parameters of position for CSOS.

  If I try to change this setting in FCPX, the application crashes after 10 seconds or less.

  No idea what is causing the problem? I re-edited the effect several times, same result. The software that I use is FCPX 10.2.2 and 10.2 of the Motion.

  MOTION

  

  FINAL CUT X

  

  Thank you.

  The values that you have published on the move have been compared to this project that you created. The values shown in FCPX are "consistent" with any project that you create. Often, you will see the center screen is 0.5, 0.5. Left and below are 0, right and up are 1.0. Or you could see Center of 0.0 and a range between - 0.5 and 0.5. Sometimes, you will see the numbers on the scale of some sort of percentage (vertical values will be 0-100 [%] and the horizontal will be based on the aspect of the project, for example, horizontal will be between 0 and 177.7778 for a project of 1920 x 1080, etc..) It will depend on the type of object and the parameters associated with what you posted.

  If you want to "correct" values in FCPX, you will probably need to rig settings, otherwise, just live with it.

  For what is * why * your model crashes FCPX, that will be another reason and not the difference in the numbers. So, can we get more information on the model?

  To use specific fonts?

  You publish alterations settings?

  Anything out of the ordinary?

• HP Officejet Pro X476dw. Message: problem with the printer or ink system. 0xc6fd0213 error code

  HP Officejet Pro X476dw purchased June 2013.  Windows xp operating system.

  Printer does not.  In a "print order" function, by modem or button copy to printer, gives me the error message: the printer failed.  There is a problem with the printer or the ink system.  0xc6fd0213 error code.

  Sometimes spits out a blank sheet of paper.

  Hi people, as @Bryan_P has said - Please contact the HP support by phone on this error message. The below listed phone numbers...

  http://welcome.HP.com/country/us/en/wwcontact_us.html

  Can you please post back to let us know how you go?

  Thanks, Ciara

• Problems with the Windows 7 updates

  I have problems with the updates of Windows 7.

  The show just download but stay at 0%, even after a number of hours of updates.

  Looks like I have had the problem for a while as I click on the button to download when he says that they are available, but they were not the installation. Since April - the highest numbered download was KBS3149090.

  I tried a couple things from these forums, but they do not work or do not install it.

  I downloaded wu10.diagcab but it does not return an error of 0 x 80070002

  You are looking for takes this mistake me https://support.microsoft.com/en-us/kb/910336 that says stop the update, remove a certain number of files and turn it back to the.      

  He says then try the System Update Readiness tool so I download and install this KB947821 , which seems to settle.

  I try to install the updates but nothings happening - don't know what else to try.

  Peter

  Windows Update process: July 2016

  I've seen this many lately.  This is what works for me and I did it on a large number of computers in the last 2 weeks.

  1. Change Windows Update settings to NEVER.

  2. Type services in the text box that appears when you click on the globe to start

  3. Select and open the services window

  4. Find and right-click on Windows Update (service), choose stop

  5. Close the Windows Update window.   If she will not close, start the Task Manager (right click on the taskbar) and end of the task.

  6. Now go to: http://wu.krelay.de/en/2016-07.htm

  7. Download 5 all updates are listed in a folder on your desktop.  Choose the correct column for your computer.

  8. Double-click on and start each one, one at a time.  Don't be surprised if one or more respond with already installed.  It may take a while to process.  This is probably one or more of them will install.

  9. You should not restart after each one ends, if there is more than one installed.

  10. Restart and wait for the Windows Update process to complete and automatically reboot your computer.

  11. Open Manager tasks again and wait until you see the percentage within the reach of the bottom and stay below 10%

  12. Now start Windows Update

      The Windows Update process happens much faster that it would otherwise have.

• Problem with the Polycom endpoint dial string via VCS

  Greetings,

  Currently I have an environment using a set of standalone Polycom endpoints (mixture of VSX/HDX units).  We have recently installed VCS - c / VCS-e / TMS and despite a few problems with the SIP registration on some of the older endpoints and management through TMS, all support works well.  The only remaining problem is when there are a number of business partners using the extensions in their chains of H.323 dialing that works very well for the Polycoms during the use not VCS - c as a guard in the numbering of the format #.  When you use this same dial string and endpoints are registered in VCS - c then the only thing it is indicated in the call history is a number of , which fails.

  I am aware that different manufacturers have historically managed extension dialing differently since ISDN only and has apparently been perpetuated until today.  However, it's a pretty critical need still at this stage and I am looking for input on chipboard VCS supports the use of extension component in the dial string (or did once the call is connected to a gateway is the host).  If so, is there a specific format for this connection string which can support both the end points of Polycom and VCS able to interpret correctly?  Does anyone have this working?

  Latest versions of software are on all components.

  Thank you in advance for any thoughts you may have!

  Hi Readamson,

  using the syntax of "device-IP-address ##extension" to compose a H323 device isn't a way standard of doing things, it is approach of Polycom extension numbering that VCS does not understand without changing the alias of a '[email protected] / * /' format.

  Assuming that the address-IP-receives the message SETUP H225 VCS-E, he does the SETUP message? Is there a way that you can configure this device to end to remove the [email protected]/ * /' part of the route the call to the post and the dialed number?

  Visit this link:

  https://supportforums.Cisco.com/thread/2129307

  Best regards, Ahmad

• Problem with the composition of the corporate directory / phone book (E.164)

  Hello

  I have a little problem with the composition of the cucm phonebook integrated telepresence system. I can search the telephone directory, and it displays the user. The format is E.164 number, but with spaces in the number of empty? And for me, it looks like telepresence system trys to deal WITH areas because if I compose without space market. So it seems it is not the phone book to a good number E.164 number.

  any ideas?

  Concerning

  Jason

  Hey Jason,

  Looks like it's still an open caveat on the current software for MX, EX, endpoints series E20 and C sq.

  http://www.Cisco.com/en/us/docs/Telepresence/endpoint/software/TC5/Release_notes/tc_software_release_notes_tc5.PDF

  CSCtz87452:

  MX, EX, E20, C and SX Series endpoints cannot use directories CUCM with numbers, including spaces.

  Thank you, Adam

• Problem with the serial number and to purchase

  I have the problem with the reception of the letter with code or serial number. I bought a month ago creative cloud for the photographer and the payment made. A letter of confirmation. but still now series or code. Please help me with this

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  .

  On this computer, your cloud subscription correctly displays on your account page?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  If you have more than one email, you will be sure that you use the right Adobe ID?

  .

  If Yes

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I just paid my creative service cloud for a month, but there is a problem with the service, is that someone has the same problem?

  I paid with Paypal, which is linked to my debit card and already wait two days.

  Thanks to the community

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -check the file hosts for blocked entries https://forums.adobe.com/thread/1912777

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  Your subscription to cloud shows correctly on your account page?

  If you have more than one email, you will be sure that you use the right Adobe ID?

  https://www.adobe.com/account.html for subscriptions on your page from Adobe

  .

  If Yes

  Some general information for a subscription of cloud

  Cloud programs don't use serial... numbers you, connect you to your cloud account paying to download & install & activate... you may need to sign out of the cloud and restart your computer and log into the cloud for things to work

  Sign out of your account of cloud... Restart your computer... Connect to your paid account of cloud

  -Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html

  -http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  -http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  -http://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  -ID help https://helpx.adobe.com/contact.html?step=ZNA_id-signing_stillNeedHelp

  -http://helpx.adobe.com/creative-cloud/kb/license-this-software.html

  .

  If no

  This is an open forum, Adobe support... you need Adobe personnel to help

  Adobe contact information - http://helpx.adobe.com/contact.html

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• Problems with the Row_Number function

  I have problems with the Row_Number function. I use to assign line numbers to records where a student has a note of passage on a module and the exclusion of the modules failed (I want to show her a 0 as the line number for the modules failed). The problem is that when I try to use a condition, the report still assigns a line number to a defective module if it does not display it (it shows a 0 I wanted to show him). The results are displayed as follows:

  Line number	Module	Grade
  1	ModuleA	Pass
  2	ModuleB	Pass
  0	ModuleC	In case of failure
  4 (instead of 3)	ModuleD	Pass

  How can I make him jump to assign a line number to all the modules failed? Please help.

  Thank you.

  Thank you very much, Melanie. I made changes to query as per your suggestion, which is a union of the modules failed and passed (using row_number on success modules). Thanks for the solution.