Problem with the USB ports, coast and Bluetooth in Satellite A100-237

Similar Questions

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Automatic update because of problems with the USB ports.

  After an automatic update this morning at 03:00 October 15, 2010 for windows vista, all my USB ports on my laptop have stopped working. Please advice all solutions to locate the update caused the problem.

  This must be a different problem from what I had so...

  In any case, I uninstalled all updates on vista (as opposed to other programs, office, outlook, etc.) and then reinstalled again and everything works fine now... go figure: /.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Error - there is a problem with the external Setup program and it must be closed when you try to install windows updates

  Original title: How can I fix external MSI?

  When I try to download the updates, the error message says there is a problem with the external Setup program and it must be closed.  Updates will not be installed.  Anyone know how to solve this problem...?

  Hi John,.

  ·         You are able to install other applications on the computer?

  It seems to be a problem with the corruption of the .net framework. I suggest trying to repair the .net framework on the computer and see if you can install the updates.

  http://support.Microsoft.com/kb/923100

  Hope the helps of information.

• I have a problem with the Narrator, repeating words and phrases.

  original title: NARRATOR in WIN7 SUPPORT

  I use windows7.  The annoying Narrator sometimes voices repeat words and phrases.  I also need help, change of voice and using Narrator to read aloud my text book I downloaded.  It is in PDF format.

  Original title: Narrator sometimes repeat words and phrases

  Hello

  Thanks for posting your query in the Microsoft Community.

  You have a problem with the Narrator, repeat words and phrases. It can be difficult when something that is important to you does not work as expected. It's pretty simple and we're here to help you solve the problem. We work as a team and get this sorted out.

  Please answer these questions-

  (1) exactly where you run the Narrator?

  (2) the Narrator extends from a particular document?

  (3) have you made changes on the computer before the show?

  I would like more information about the issue.

  Method-

  I wish that return you the items for assistance-

  Narrator doesn't read what I expect him

  http://Windows.Microsoft.com/en-us/Windows7/Narrator-doesn

  Hear text read aloud with Narrator

  http://Windows.Microsoft.com/en-us/Windows7/hear-text-read-aloud-with-Narrator

  Let us know if you need assistance regarding the issue. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.

• When I try to play a game online a page appears saying certifcate theres a problem with the security of websites and it will not connect to yahoo messenger

  Im trying to sign on a MSN chat game when I do a page appears saying that there is a problem with the security certificate from the Web site.

  It gives you three choices

  leave the Web site

  continue to this website (not recommended)

  more imformation

  When I click on continue he don't go to the game it won't let me play and a page comes up saying (open ports)

  also when I try to log in to yahoo Messenger, a message pops up saying

  We cannot connect to yahoo messenger

  then he gives me a choice of output or troubleshooting

  When I use troubleshooting, it is said that there could be a problem with your internet connection

  I have listed these two items because they were both working at the same time now their not.

  Any site, I try to get shows this message cerificate

  I did a scan on my computer and it says (fichier-\device\mfeavfk01.sys) (masked driver infection)

  so im collecting it is all related to the same problem

  Hello

  1. what browser you use to play games online?

  2. If you are using Internet explorer, version of Internet explore you use?

  Method 1:

  If you use Internet Explorer, I also suggest you to see link and check.

  "There is a problem with the security certificate from the website" when you try to visit a secure in Internet Explorer Web site

  http://support.Microsoft.com/kb/931850

  Method 2:

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  WARNING: Reset Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  If you are facing any issue links to the yahoo Messenger, I suggest you to contact yahoo messenger support forums and check.

  http://help.Yahoo.com/communities/index?page=forums

• I click on "Fix a problem with the NVIDIA graphics driver" and he says: "this solution could not be downloaded.

  I click on solve PC problems (the flag) and it says address a problem with the NVIDIA graphics driver. I click it and it says:

  This solution could not be downloaded

  --------------------------------------------------------------------------------

  The most likely causes:
  Your computer was unable to download the solution at this time. Make sure that your computer is connected to the Internet and then try to download the solution later.

  --------------------------------------------------------------------------------
   
  I am connected to internet, and the works, works etc of web browsing of windows update. Why it is not downloading the solution?

  Download and install the latest driver for your graphics card nVidia.

• Font problem with the publication between Animate and HTML?

  Hello!

  I have a problem with the publication of my animated movie in CC to animate. Some computers don't recognize the font on Google Chrome that I chose in my animation. Firefox never recognize.

  I don't know how to fix.

  Some pictures of the problem:

  -This is the image of Google Chrome with melting Source without Pro. It works normally (on some computers).

  

  -This is on Firefox. The police has not been integrated.

  

  What is going on?

  Thank you!!

  Hello

  You can try to use the type of static text in HTML5 Canvas document for WYSIWYG experience and see if that helps?

  PS: The static text in the document of the canvas is converted to outlines when publishing to preserve the WYSIWYG experience. If you have a requirement that you need to preserve the text in the js to output file, then use a dynamic text with Typekit web font for experience of consistency.

  Thank you!

  Mohan

• Problem with the Desktop version, Tablet and phone. Help, please.

  I created a website in Muse. I created the Desktop version, Tablet and phone. But my problem is that, once I open my website on my tablet or phone it shows not always the correct form. Most of the time it's to show the offline version even if I am looking on my phone. What can I do?

  Hello

  I watched address phone and noticed 2 flaws.

  1 URL internationalchangepartners.com no redirects to internationalchangepartners.com/phone when I tried on the phone.

  Please do the following to solve this problem

  Hello, I made a site using the 3 platforms: desktop, Tablet and smartphone, but... on tablets and smartphones appears the design office, no idea why?

  2. now when I check link internationalchangepartners.com/phone I saw that the Menu options are linked with pages of the tablet.

  To over come this I suggest you to select hyperlinks with a lot of attention. Once you select the Menu item and add the hyperlink, select the option under the phone if you are available for the phone.

  Hyperlink has a separate list of the link for each structure. Look at the screenshot below.

  

  Once there 2 flaws were fixed there is no problem with the site.

  Concerning

  Vivek

• Problem with the tool photoshop pen and little

  Hello, I have a problem with the tool feather of Photoshop cs5. I can barely see paths im making. Is it possible to fix it?

  Isee the pen tool paths im how's it's just makes it miserable to use this tool:

  http://ImageShack.us/photo/my-images/18/85169959.jpg/

  You can barely see the paths (I did a few trails to show the photos.)

  Secondly, in the bottom of the file it says "Exhibition in 32-bit only", even though I have windows 7 64-bit and 64-bit photoshop cs5.

  How to solve these problems?

  Thank you.

  The thing that says 32-bit exhibition (has nothing to do with what version of cs5 your use) could be here because you have already opened or created a document in 32-bit/channel mode.

  You can change what appears here by clicking on the little arrow and choose something else.

  

• Problem with the loading of XML and xmlns

  I'm having a problem with loading an XML file that was created by Filemaker.  FileMaker will display an XML file by using one of two different grammars.  A poster of a standard form for the most that I can use with a glitch.  Flash CS4 AS3 seems to have a problem with the xmlns in one of the nodes.

  More precisely:

  " < FMPDSORESULT xmlns =" http://www.FileMaker.com/fmpdsoresult "> "

  ' If I remove the xmlns = " http://www.FileMaker.com/fmpdsoresult 'the file is loaded properly and I can access the different fields without problem.  However, when I go the xmlns =..., it will trace the XML properly but I can't access the fields by using the code below.  It drives me crazy!

  With part xmlns in the XML file, I get the following error when attempting to load the thumbnails files:

  TypeError: Error #1010: a term is undefined and has no properties.

  I need it so that the user can enter/change the data and simply output the XML file of Filemaker and then the Flash load the XML file not corrupted and displays the information requested by the user.  That is to say I might have the user open the XML file in a word processing application and have remove them the xmlns..., but it is rather heavy and not very user-friendly.

  I tried all the xml.ignore functions I could find, but it does not help.  I hope someone out there can help you

  Thank you

  -Brand-

  _____________________________________________________________________________________

  Partial XML:

  XML to export Filemaker:

  <? XML version = "1.0" encoding = "UTF-8"? >
  <! - this grammar has been deprecated - use the FMPXMLRESULT instead.
  " < FMPDSORESULT xmlns =" http://www.FileMaker.com/fmpdsoresult "> "
  < ERRORCODE > 0 < / ERRORCODE >
  Sport.FP7 < DATABASE > < / DATA >
  < LAYOUT > < / PAGE layout >
  < LINE MODID = '1' RECORDID = "1" >
  Brand of < FirstName > < / name >
  Fowle < name > < / LastName >
  Veil of < sport > < / Sport >
  Medal of <>no < / medal >
  Design of < CourseOfStudy > < / CourseOfStudy >
  < year > 1976-1978 < / year >
  California < HomeState > < / HomeState >
  < ImageName > 93 < / ImageName >
  < / ROW >

  ...

  < / FMPDSORESULT >

  __________________________________________________________________________________

  AS3 code:

  Import fl.containers.UILoader;
  var aPhoto: Array = new Array(ldPhoto_0,ldPhoto_1,ldPhoto_2,ldPhoto_3,ldPhoto_4,ldPhoto_5);
  var toSet:int = 10; time to time delay
  var toTime:int = place;
  var photoPerPage:int = 6;
  var fromPos:int = photoPerPage;
  var imgNum:Number;

  var subjectURL:URLRequest = new URLRequest ("testData_FM8.xml");
  var subjectURL:URLRequest = new URLRequest ("Sports.xml");
  var xmlLoader:URLLoader = new URLLoader (subjectURL);
  xmlLoader.addEventListener (Event.COMPLETE, xmlLoaded);
  var subjectXML:XML = new XML();
  subjectXML.ignoreWhitespace = true;
  subjectXML.ignoreComments = true;
  subjectXML.ignoreProcessingInstructions = true;

  function xmlLoaded(evt:Event):void {}
  subjectXML = XML (xmlLoader.data);

  If {(root.loaderInfo.bytesTotal is root.loaderInfo.bytesLoaded)
  removeEventListener (Event.ENTER_FRAME, xmlLoaded);
  trace ("data XML file loaded");
  trace (subjectXML);
  } else {}
  trace ("file not found");
  }
  imgNum=2;//subjectXML.ROW.length;
  trace (subjectXML);
  loadThumb (0);
  }
  function loadThumb(startPos:int):void {}
  var count:Number = aPhoto.length;
  trace (subjectXML.Database);
  for (var i = 0; i < count; i ++) {}
  try {}
  aPhoto[i].source="images/"+subjectXML.ROW[startPos+i]. ImageName + "_main.jpg";
  } catch (error) {}
  trace (e);
  }
  aPhoto [i] .mouseChildren = false;
  aPhoto [i] .addEventListener (MouseEvent.MOUSE_DOWN, onThumbClick);
  }
  trace ("current mem:" + System.totalMemory);
  ldAttract.visible = false;

  }
  function unloadThumb (): void {}
  var count:Number = aPhoto.length;
  for (var i = 0; i < count; i ++) {}
  aPhoto [i] .unload ();
  aPhoto [i] .removeEventListener (MouseEvent.MOUSE_DOWN, onThumbClick);
  }
  trace ("current mem:" + System.totalMemory);

  }

  function onThumbClick(evt:MouseEvent) {}
  var i: Number;
  trace ("Thumbnail clicked" + evt.target.name);
  i = findPos (evt. Target.Name);
  ldLrgPhoto.source="images/"+subjectXML.ROW[i+fromPos]. LOCAL_OBJECT_ID + "_main.jpg";
  ldLrgPhoto.visible = true;
  btnPrev.visible = false;
  btnNext.visible = false;

  gotoAndStop ("showPhoto");
  }
  function findPos(thumb:String):Number {}
  var pos:Number;
  var count:Number = aPhoto.length;
  for (var i: Number = 0; i < count; i ++) {}
  If (thumb == aPhoto [i] .name) {}
  POS = i;
  }
  }
  return pos;
  }

  Mark,

  The ':' is what we call a scope resolution operator. Using namespace allows you to potentially have two or more nodes that have the same name but a namespace 'different '. "These are normally specified in xml in the form xmlns:mynamespace ="http://myuniqueURI.com/etc"

  Normally, you would use the mynamespace:node by naming your xml nodes that are specific to this namespace.

  But the best is that namespace by default, when there is no real Prefixeespacenom: in the name of node as:

  That's how it is specified in your xml file, that is to say all the nodes without a prefix belong to the filemaker namespace.

  In actionscript, you navigate by using the scope-resolution operator and the variable that represents the namespace does not necessarily resemble the part "mynamespace" above. In your case the namespace used was the one by default (no), but a value has been assigned.

  To the question of the length, you must use the length() method, otherwise the e4x filtering seeks nodes named 'length' and creating a XMLList with no entry in there (because it's not). It is a common thing with other "Properties" that are expressed in the form of methods like children() and often take me when I started with the model XML as3.

• Tecra A8: Problem with the USB printer connected to the Port Replicator III

  Hi all

  I have a problem with my Tecra A8, year Advanced Port Replicator III and a USB printer. With the printer connected to a USB port on the Port Replicator, I have to wait 2 minutes for printing to start. When it is connected directly to a USB port on the laptop and the laptop disconnected from the Port, printing starts immediately. I have the latest drivers from the Isensys of Canon LBP 2900 installed and Windows Vista professional as the operating system.

  I called the technical support of my country, but her is not recorded similar problems.

  A person with similar problem? Some help would be very appreciated.

  Thanks in advance.

  Hello

  Seems like a strange question... Already done the standard procedure in the event of such errors? :)

  The standard procedure is somehow similar to the following:

  -Update your BIOS
  -Update all the drivers for your machine
  -Update your printer drivers
  -Update your operating system

  If all else fails, then try an another Portrep if available, maybe you need to contact your dealer for an another portrep for the test.

  Something like this should be your way. And then you sucessfully made a TROUBLESHOOTIN´ ;)

  I'd be happy to hear feedback from you on your situation...

  Welcome them

• Problem with the serial port and external DLL

  Hello

  I have a Platinum (innco systems CT 0500), which is connected via a USB-RS232 to PC Converter. I want to fight in LabVIEW.

  The software CD contains a DLL and a header file - I imported both in LabVIEW.

  But I am unable to get a connection via LabVIEW COM port. There is an error of the adage about function ConnectTurntable() return code 'could not open port - port address is unknown to the PC or port is used by another program.

  The demonstration of the delivered CD software works - the connection to the COM port is working with him, so there must be a mistake in my LabVIEW Code.

  Thanks in advance