Problem with the volume of a new 7 Slate

Similar Questions

• Problem with the volume on Satellite Z30 control - A

  Hello

  I have a problem with the analog output sound on my A - Z30 (internal and line/headphone speakers). If for example I play music I see a clearly weak signal volume on the fader control of volume in my Win 8.1 source volume control. But on the master fader, I get a completely saturated and distorted signal. Even down to the time source and output does not help... it just sounds horrible.

  See: link: [https://dl.dropboxusercontent.com/u/30325547/SoundProblem.jpg] (sorry, it's a German system)

  Here we can see that the (extreme right) music player delivers a signal of low volume, while the master fader (left) receives a 100% volume distorted signal.

  If I use external speakers that connect via USB (Logitech Z305) it works perfectly.

  I have already uninstalled and reinstalled the latest version of the drivers for my sound card. But this problem is very persistent. It seems that something pulls the signal up, but I can't find any control that turns off.

  I'm not completely sure when that started, but it can be connected with the beginning of the use of a USB headset. But I already uninstalled this software once again, but that did not help as well.

  Any idea?

  Thank you very much

  PHILIPPE

  Hello

  According to the specifications of the laptop and drivers available on the Toshiba driver page, this laptop supports the Realtek sound card.
  That's why the Realtek HD audio Manager software should be available in the control panel.

  Realtek HD audio Manager provides different parameters as well as the speaker of the configuration options to get the best sound performance.

  In addition, computers laptop Toshiba are preinstalled with a sound tool DTS/Soft
  This software provides audio improvements in your computer.

  To be honest, I not quite sure what which could affect your sound volume, but the mentioned tools and configuration should be checked permanently m.

• Pavilion dv6-2124el: problem with the volume key

  Hello
  
  I wanted to know if someone could help me with this question: I have just formatted my laptop and installed Win7 HP 64 bit computer and I can not anymore in order to visualize the volume HP bar on the screen. I tried to install HP Quick Play, quick launch buttons and touch fast, but it does not work. Maybe I installed wrong version? Maybe I missed another driver/software?
  
  How can I solve this problem?
  
  Thanks for reading it.

  Hello

  For your particular laptop volume on the display screen is provided by HP MediaSmart SmartMenu on the following link.  Note:  Make sure that you have installed at least 1 other MediaSmart software before installing this.

  HP MediaSmart SmartMenu

  After the installation is complete, restart the laptop.

  Kind regards

  DP - K

• Problems with the Java Extensions and new SDK 1.5

  Hello

  I had built a Java Extension with version 1.0 update modifing WidgetConfigImpl.java as PDF attached. And I was running properly.

  Now, with the 1.5 SDK don't work and Java not return a warning or an error.

  I have tried otherwise, generating a .jar and include it in the file ext with eclipse, but do not show the .jar in Add dialog, this same problem occurred at 1.0 and I solved adding that the Java plug-in with the attached PDF file.

  Y at - it new path by adding the extension modifing WidgetConfigImpl.java or something similar?

  Why anti-pop immediately following pushScreen in your code?  I don't even know what that would do, but there is a good chance that it will never show your screen.

  This does not work for the screen display?  Generally speaking, you would record your screen as a listener for an event and close the form this way, right?

  UiApplication.getUiApplication().invokeLater(new Runnable() {    public void run() {        try {            UiApplication.getUiApplication().pushScreen(_screen);        } catch (MediaException e) {             Dialog.alert("Error: " + e.getMessage());        }    }});
  

• Problem with the touchpad in a new Ideapad G70-70

  I bought this computer a few days ago and that I am really satisfied, but only with a problem that is engine drives me crazy, I have a big square thingy that aims to move the mouse - down of those, I now have two funds, if I move my finger on the big square at determined points, it acts like I clicked on the on the bottom left - he heppens much too frequently and can ruin a stealth mission in games, mark the huge amounts of text (followed by a deletion of the text)

  (Sorry for the bad paint - my mouse was not available to me at the moment)

  the red spot is the place where it heppends

  

  * edit - I still warranty

  Hi tomer8009,

  The only suggestion I can make is to go into the properties of the mouse, and playing with the sensitivity settings.

  I can give you a phone number for support.

• Problems with the addition of a new row in my table

  Im a beginner of the ADF, but I thought it would be easy to make basic CRUD stuff in the ADF. IM now even when I try to add a new line at my table.

  Seems that the primary key id is not set correctly.

  could someone help?

  ADF can do for you is triggering auto incrementing ID using an existing sequence.

  Set you this up in the entity primary key attribute: Expression as value type and enter the following information:

  (new oracle.jbo.server.SequenceImpl ("LAYOUT_SEQ",

  (object.getDBTransaction ()) .getSequenceNumber () .bigDecimalValue)

  LAYOUT_SEQ is the sequence of the DB

  Marc

• Problem with the drawing of a new shape in Flex

  Hello!

  I am new to Flex and AS3 (don't laugh at me). I have a problem, try to draw a shape. The alert is triggered, but the form does not appear. Need help.

  Code:

  <? XML version = "1.0" encoding = "utf-8"? >

  < mx:Application

  ' xmlns:mx = ' http://www.Adobe.com/2006/MXML "layout =" " absolute "creationComplete ="drawTrapecio ();"

  >

  < mx:Script >

  <! [CDATA]

  Import mx.graphics. *;

  Import flash.display. *;

  Import mx.controls.Alert;

  public function drawTrapecio():Sub

  {

  Alert.Show ("test");

  var trapecio:Shape = new Form;

  Finally, I replace Sprite for the form, like this: var trapecio:Sprite = new Sprite, nothing helps.

  trapecio.graphics.lineStyle (5, 0 x 000000);

  trapecio.graphics.moveTo (100, 100);

  trapecio.graphics.lineTo (200, 50);

  trapecio.graphics.lineTo (200, 350);

  trapecio.graphics.lineTo (50, 400);

  ce .addChild (trapecio);

  }

  []] >

  < / mx:Script >

  < / mx:Application >

  I really appreciate any help you can give.

  Madrid

  What you can do is to examine each of the objects such as HBox. Then draw shapes inside. So that you can dragdrop using the handler for the dragdrop event. You have to have the label as a child of this HBox it self. If you enter the code let me know.

• Problem with the license on a new RoboHelp 7 installation on a 64-bit XP system

  I say new because this machine had never before installed HR. RH7 actually works on Windows XP Professional 64-bit systems?

  Thanks for your quick response. Has saved me a lot of wasted time trying to get the thing to work.

  . MW

• Problem with the controls volume/internet on my laptop HP HDX 16

  Hey,.

  I have a laptop of HP HDX 16, around the age of 8 months. I keep having problems with the touch buttons that controls volume, bass/treble and the internet. The buttons randomly disappear by themselves, turn on and off Alternatively my volume/bass/treble from top to bottom and my internet.

  I have updated the drivers for the buttons to quick launch without result. I've also just updated my computer to Windows 7, so my Bios is brand new (the problem started before I updated to 7).

  As you can imagine, get my internet randomly stops and for the black volume screen blocking what I was doing and hang my computer is getting pretty annoying. Any help on this would be surprising.

  Thank you
  Printertron

  I also have the same problem. HDX 16, around the age of 3 months.

  I found to do all sorts of updates the driver, uninstall, System Restore (no), and does not help.

  I'm still on Vista, but when I get my kit to upgrade to Windows 7, I had planned to see if it resolved the problem.

  Technical support HP told me that if a recovery does not resolve the problem, it must be delivered to them, and the band of totality quicklaunch may have to be modified.

  I intend to make the recovery during the holiday season.

  Based on the fact that you got your computer 8 months ago, I assume that you have not used an upgrade kit. Which means, I would recommend doing a recovery before calling the technical support because they will just have to insist that you do anyway.

  An interim solution, when the volume control locks your screen is at the end of the process called "SmartMenu.exe". It will reload the next time that you start your computer.

• Anyone having problems with the new iPhone LTE connection 7 on Verizon?

  I am now on my iPhone second 7 with Verizon. I had four phones for me and my family. I have now had issues where I have no signal in the same areas where my signal allows to be strong. I can't solve the problem with the activation/deactivation of the airplane and then mode again in normal mode. My phone will rest with no signal for 5 minutes, then going to LTE with three bars. I also had the problem where I had only 1 x signal, while my son standing right next to me has LTE. And he had the same questions, where I'm on LTE and it gets no signal. I use to have LTE where I live and work all the time, now it's spotty at best. Apple has replaced me and my sons iPhones but not luck. Still do. Any ideas or an any other suffering?

  (1) go to settings/cell phone/cellular data Options/enable LTE and select ONLY the DATA. This seems to solve the problem (as a temporary solution) for most of the people affected by this problem. The bad part is your request might not be as clear (since they cannot use the highest LTE signals) and you can make calls and data at the same time. But it does not solve the issue.

  (2) there are rumors (but you didn't hear that from me that we only are not supposed to discuss beta software program Apple in this forum) that the new version of Apple Beta for iOS (which also includes an update of the software carrier Verizon to 26.0) seems to solve this problem. So, there's a light at the end of the tunnel.

• I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, I can call any body, but when l'm calling people any body can ring me just now, I thing the problem where new soft

  I encountered the problem with the last iOS 9.3.2 update I can't receive call from people, but I can call any body, but when l called people any body can ring me only at this time, I think that the problem of the new update. can u check this and answer my question.

  and my phone

  iPhone 6plus

  You see a Crescent Moon at the top of the screen icon? If Yes, disable does not bother to: settings - do not disturb = Off.

• Hello! The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that s.

  Hello!
  The new version of Firefox, I have a problem with the opening of the site VKontakte. The browser displays the following error message: "Firefox has determined that the server redirects the request for this address in a way that it will never end." How to solve this problem? Please excuse me for my English.
  Sincerely, Vsevolod.

  This can be caused by corrupted cookies or cookies that are not sent or otherwise blocked.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  See also:

  • http://KB.mozillazine.org/The_page_is_not_redirecting_properly
  • http://KB.mozillazine.org/cookies

• Satellite U500-17F: problems with the new HARD drive

  Hi everyone, I got some troubleshooting with my Satellite and a new drive, I bought recently, because that is already damaged because of too many bad sectors. One is a Western Digital Scorpio Black 320 Bg (WD3200BEKT model number). It should be a fast reader but is not with my Satellite.

  After having mounted the drive in the laptop, I ran a new installation (with full disk format} Windows 7 (64 bit) with all the necessary drivers (that I downloaded directly from the Page of Support Toshiba.)

  The problem is that the laptop needs a lot of time to start and also to disable, and whenever I try to run an application or start a program (for example Firefox, or just a few windows applications), the laptop freezes for about 30 to 60 seconds, the drive no longer works (you can hear leaders put in position 'parking' and the HDD LED control is constant) ", no lights flashing).

  It seems that the drive (during this 30-60 seconds) in something as a stand-by mode. I ran a few Western Digital diagnostic tools and the car looks all right to 100%. It works also without any problems in the other laptop (HP Pavilion DV6500). Could this be a problem with the controller (Intel ICH9M - E ATA AHCI controller) driver?

  Any suggestion?
  Thanx

  Hello

  You use the latest version of the BIOS?
  Please check if you need a BIOS update. Of course I read in a few discussions on the similar question of Win XP you use Win 7 but its value to check the update of the BIOS and U500 series.

  In addition, I recommend check you the power of Windows 7 options.
  Disable in the power profile that you use power saving HDD.

  Just a question:
  You use the option AHCI in the BIOS?
  As far as I know it of possible to use either a compatible SATA AHCI mode.
  AHCI must be used because this option would use full SATA performance.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• Problem with the new installation of Windows XP on the Satellite A100-259

  Hi all!

  I have a problem with the fresh install WIN XP on Satellite A100-259 (PSAA2E).
  I already deleted the partition, formatted (NTFS) and tried to reinstall from recovery disk that initially provided with the laptop. But whenever I try to install a problem is detected (for the most part it's 'page in the nonpaged area failure').

  I also tried to install the OS directly from MS Windows XP Home Edition SP2 CD - the same problem.
  I checked the partition using PQ Magic and discovered that there are ' partition table error #110 ".» So, what I did:

  (1) delete partition-> create new partition-> format (NTFS)-> reinstall from recovery disk-> has not yet;
  (2) partition delete-> install WinXP CD original by create and format partition option-> has not yet;
  (3) delete the partition (using the magic of pq)-> create partition (using the magic of pq)-> format NTFS partition for win xp option-> check partition-OK no problems don't-> installation of original win XP CD-installation without changes-> option failed even once
  (4) delete the partition (pq magic)-> create partition (pq magic)-> format NTFS partition for win xp option-> check partition-OK, no problem-> installation of the recovery disc-> has not yet

  Whenever a different error is detected, so I can't identify the problem. I don't know what to do. Does anyone have any ideas?

  Hello

  Seems that there are some problems with the standards of the partitions.
  A friend of mine has tried to install the OS on the recovery CD on the laptop that has been formatted with Partitions Magic 8 and the installation failed.
  It was very strange

  Finally, we have formatted the whole HARD drive using the CD original Windows XP Pro.
  We did not remove the partition but simply kicked this CD and after the configuration process spent, we formatted the whole HARD disk and install XP without creating all the partitions.