Problems with the Java Extensions and new SDK 1.5

Similar Questions

• Problem with the Java PATH and HOME.

  Hey, so I tried to run a Java program through the console but I got an error that says:

  ERROR: JAVA_HOME is not set and no "java" command could not be found in your PATH.

  Please set the JAVA_HOME variable in your environment to match the installation location of java.

  So I edited the variable path: C:\Program Files\Java\jdk1.8.0\bin\java.exe and the JAVA_HOME variable to: C:\Program Files\Java\jdk1.8.0\bin\java.exe and I also tried to use jre8 instead of jdk1.8, but the program still did not run. Already, I went on the java Web site and the site Internet said the same thing about what to do so I ask here see if someone knows how to do this. I already know how to change system variables, but I'm doing something wrong with the path and the JAVA_HOME or y at - it a bug or something?

  Hello

  Check with the support of the Java program and the Support of Java - e-mailer or enter
  a message on their site if possible. Possible the program makes a wrong call.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Problems with the ColdFusion Extensions and CF/Flex Application Wizard

  I configured the Eclipse RDS according to the instructions in the help documentation. The RDS Fileview and Dataview work OK, but I did have luck with the browser Services: when I try to increase (+) the element localhost, the only thing that appears is the message "Unable to get the metadata for CFCs."
  
  The components Panel in Dreamweaver 8, which has exactly the same information, works very well.
  
  Perhaps related to the above: when I create a Flex with the CF/Flex Application Wizard project and examine project properties, in the Flex Server section, I get "because this project does not use a server, these settings do not apply. I find it strange: a ColdFusion project that does not use a server? In any case, the wizard, I not was able to create a simple project that works.
  
  If anyone has had similar problems and was able to solve them, I would be grateful little light on the subject.
  
  Carlos
  

  Well, I could solve this problem by CF UN-installing and reinstalling.

  I did some more tests (UN/reinstall once again) and it seems that this problem occurs when CF is installed in devnet version mode and not if in developer mode.

  To check if CF is installed in devnet mode look in the administrator of the CF under "server settings-> analytical settings-> version information", you will see a notation for devnet.

  I also did a little poking around and it happens whenever you install CF using a certain range license keys. The keys of this range are valid keys for installation, but they alter some critical parameters in CF (watermark paper/pdf flash and apparently some RDS stuff), the solution is to install with a key dev-net or in developer mode.

• Problem with the registratyion extension and guarantee of Satelite A300-1MT

  Hello guys,.

  I am trying to record a new Toshiba Satellite A300-1MT I bought recently.
  I filled out the required fields, but when I click on NEXT, I am asked to enter a "" contract number".
  How can I find this number?

  Thanks in advance!

  Stand by. What you want to do exactly? AFAIK for laptop for registration and warranty extension are two different steps.

  When I bought my Satellite P300 after the first start, I connected to the internet and registered according to the procedure of registration available on the laptop itself. After having done that, I received email confirmation from Toshiba.

  Some Toshiba laptops even come with a free warranty updated by registration. In this case, you will receive a brochure supplied with your laptop. In order to activate the upgrade, you must save the free upgrade under the Standard warranty on www.toshiba-europe.com/registration

  If you have this free warranty or you have purchased extended warranty more?

  You can check the status under the http://www.toshiba-tro.de/unitdetails

• problem with the Finder - files and folders displaying incorrectly

  After acquiring a new iMac, I noticed a problem with the Finder - files and folders are displayed wrong (see table).

  This is what happens always after the files have been transferred from one folder to another. I was reminded of my days of using Mac OS in the 1980s when automatic setting of files was not so "automatic." I use Mac OS for decades and I don't remember the last time I had to think about GUI problems like that.

  Other problems in the graphical display of files and folders were introduced, such as when you have hundreds of files in a single folder, you end up deleting about 30 to 40 of them say in a particular section, and you end up with gaps of the ChartSpace where files used to be, that is the remaining files automatically rearrange themselves (fill in these gaps) - never. A week later, you open the folder, and the gap of GUI is still there.

  I decided to do a clean install of the operating system but nothing works.

  Is there some setting in Prefs I'm missing?

  

  Hi there highland99,

  Looks like your folder icons are not accommodating themselves automatically you plan to do. To me, this indicates that you have organize by the None value in the view menu. You can change the way files and folders are prepared automatically by clicking on view > reorganize by and selecting how you would like that fixed.

  Thank you for using communities of Apple Support.

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Problems with the radial tool and the gradient filter tool.

  I have suddenly problems with the radial tool and the tool filter degraded.  They are turning to my red while selection that the assets and not with the results of the any adjustments.  It is a new issue and out now where

  Does that help? Note that the tool must be active to see the check box.

  

  In addition, another reason, that you do not see it could be that the toolbar is not displayed. The toolbar display switch is to press the letter T.

• Equium L10: Problem with the main battery and battery RTC

  Hello

  I have the Toshiba Equium L10 and it is about 14 months old and I have problems with the battery and how much time it takes after a full charge. I also have problems with the RTC battery and an ERROR 0271: check date and time settings message when I turn on the laptop.

  Regarding the battery, I can fully charge it upward in about 3 hours, but when I start to use it, apparently in the last few hours around one and a half or so and then it needs to be recharged. I can have down for about 40 minutes and then turn it off and come back later or in a day or two. How long should I expect from a fully charged battery?

  About the batttery RTC, it really becomes a pain and I only started to get the message of the ERROR 0271 start-up, in recent weeks. I can charge the battery pack and then leave for a few days, but when I turn it on, I get the message ERROR 0271 on the date and time incorrect. Surely after a full charge, the RTC battery should last longer than a few days?

  The manual says that if the RTC battery is exhausted or becomes weak, you must charge the battery of the CCF for 24 hours, in a different part of this manual indicates between 24 and 48 hours, but how can load you for long when the sections concerning the charging battery pack status after charging the battery you unplug the power adapter because leaving connected will shorten the life expectancy of the Battery Pack. So, how we can charge the battery of the CCF for 24 to 48 hours if we shouldn't leave the AC adapter plugged in once the battery is charged - which is nearly three hours. Suggestions about these problems would be appreciated.

  Besides we all know that it is easy to change the CMOS/RTC battery in your desktop base unit, but is it easy to change in a Toshiba Equium L10?

  Concerning

  Brave0

  Hi Brave0,

  The normal recommendation for the CMOS (RTC) battery is to leave the laptop connected to the power supply at least 12 hours when the main battery is fully charged. The charging circuit is going to hijack the current to the load automatically RTC battery and no current will be forwarded to your main battery.

  Recommendation do not leave the power adapter is plugged in the main battery is fully charged is really only applicable to older laptops that used no batteries Li - ion and therefore they had to be completely discharged before recharging to avoid any effect 'memory' of the battery.

  With modern Li-ion batteries, it is quite safe to leave the battery when fully charged and still power the laptop from the AC adapter. The charging circuit will pass all the battery charge if it is fully charged.

  Kind regards

• I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse.

  Original title: right click on the mouse itself activating

  I borrowed a USB to a person at work and I started having problems with the wireless mouse and the carpet of my laptop - Lenovo ThinkPad T420 mouse. The left click of two devices works normally, however, sometimes she does not respond to clicks and it takes a few seconds to work. The left button was constantly starts to turn on, as if he was stuck. After that I hit Alt + Tab and modify windows it stops for a few moments and starts at a later date. I havo not found a specific condition or a combination of keys that may trigger the fault.

  I read a few posts on discussion forums, but all say that it could be a hardware problem, which I think is not, because both devices have the same problem and I'm sure it all started with the insertion of the borrowed memory stick. I scanned the readers to help Symantec's EndPoint Protection and installed Microsoft Security Essentials and performed a full scan, but found nothing. I even restored the system, but the problem remains.

  Should I get a different antivirus? How can I find the cause so I can find a better targeted solution?

  Try to install the drivers from this link and check.

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&LegacyDocID=MIGR-77167

• I get the message: Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Photoshop has been giving me the warning:

  Photoshop has encountered a problem with the display driver and has temporarily disabled GPU enhancements. Visit the Web site of the manufacturer of the video card for the latest version of the software.

  Also other programs are affected.  I suspect a recent download of Adobe.  Can anyone HELP.

  No, it has nothing to do with updates of Adobe. There is a problem with your video card driver.

  Go directly to the Web site of the manufacturer of the GPU for updates (not Microsoft, not a System Builder).

• Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  Problem with the clone stamp and Healing brush, as soon as I use them I get a second image duplicated on top that move with the tool

  You're apparently talking about Photoshop, so I'll pass this on Photoshop beginners forum.

• Support for Arabic characters - problem with the .java resource group

  Hi all
  I have a requirement to internationalize the web application from merger and support Arab characters
  
  I have a file of properties in the project view controller and a .java resource group in the model project.
  
  I followed the steps mentioned in the documentation
  Regardless of the text defined in the .properties file works fine, the problem is with the .java resource group. The characters defined in the java file is
  shown on the Web page, as follows.
  
  O´UŠO³O¨ O´UŠO´O¨O´UŠ
  
  What could be the reason. Can someone help me on this?
  
  
  
  Jdev version 11.1.2.0.0

  And you can also try like this,

  My locale in backing bean file is like this

  Locale bean

  public class LocaleBean {}

  language of the public channel = 'en ';

  /**
  * @return
  */

  {} public void changeLocale (language: String)
  System.out.println ("changeLocale" + language);
  This.Language = language;
  this.setLanguage (language);
  Locale newLocale = new local (this.language);
  FacesContext context = FacesContext.getCurrentInstance ();
  context.getViewRoot () .setLocale (newLocale);
  JSFUtils.storeOnSession ('LOCAL', language);
  System.out.println ("end of change of locale");
  }

  {} public void setLanguage (language: String)
  This.Language = language;
  }

  public String getLanguage() {}
  return language;
  }

  {} public void changeLocaleAction (ActionEvent actionEvent)
  changeLocale (this.language);
  Add the code in the event here...
  }
  }

  Faces - config.Xml

  
  
  
  Oracle.ADF.Rich
  
  Resorces.XX
  message
  
  
  en
  AR
  en
  
  
  
  localeBean
  LocaleBean
  request
  
  

  and my package of resource like this:

  xx_ar_AR. Properties
  XX. Properties

  And the project properties > compiler property > character encoding > UTF-8
  &
  Select Tools--> Preferences--> environment
  and then set the UTF-8 encoding.

  no need to change your Trinity - config.Xml

  Concerning
  PY

• Problem with the volume of a new 7 Slate

  I'll put up a new slate of 7 and I have a problem with the sound.  I have all the sliders to the max value, but any video or app plays at a very low volume on the builtin speakers. A trial has been with FIOS app that allows me to stream TV shows. I have to hold the Tablet so the speakers are right next to my ear to make the same concersations on the show and it's barely...

  Am I missing something?

  How to make your slate with audio files simply by using the application to play music?  And have you tried to play a trailer of the game of Google?  Type right on a movie title and play the trailer by typing on the > arrow.

  What if you use headphones?

  Do you have ear system sounds?  Go to settings > sounds > Touch seems to be there where there is a checkbox on the right whether Touch sounds are on or off.

  Speakers of slate are not all that, but they do not produce a sound that is strong enough to listen to the TV shows and movies.  If you can not enough volume of them with other applications such as the music plays, there may be a hardware problem.

  A few other suggestions... try to restart it.  And back to headphones, try inserting a headphone plug in all the way and disconnected.

  _
  As a contributor of top of page on the Forums of media consumer, HP, HP gives me access to the slate of 7 free of charge so I can better answer questions on the Forum.

• Problems with the video card and sound card on Toshiba model #PSLCOU - 02701G

  I bought a new laptop in 2009, and it is a Toshiba, model #PSLCOU - 02701G. After about three months the video card and the sound began to spoil. It's what he does, I can go on U-tube or any web site that has a video to watch like CNN news, etc. What it does is it starts to play and the video and the sound is good and he paused for a few seconds and starts again, new breaks and pauses, starts, pauses, starts. He does it all the time, and I was wondering if you all have any idea whats going on? Help? Help?

  It really sucks when you try to watch the news. Also, I put a CD or DVD into the laptop and it works perfectly. I can watch any DVD or listen to a GREAT Cd.

  How is your network connection?  Sometimes, the system needs to create a cache to store the downloaded information and if the download is not pass quickly enough the system will freeze while wiaiting for download to catch up - not a problem with your sound cards and video, but with the speed of Connection on the website or on the network itself (or your network equipment).  This looks like the case if the DVD and the CD's works fine.  Check your internet connection and try to download the video pages to see if the problem is with all the downloads, or only those on a site.  You can contact your ISP and have them help check you connection and settings and the modem for problems or changes, you can do to improve things. Sometimes happens to me as well in the internet connection runs slower than normal and there is nothing that I can do but wait to accelerate - and it's frustrating.

  You can get in trouble with your device drivers.  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get the drivers (and you need you to do all you have time to do, but at least the network card, sound card and video card - they can help way beyond simply solve this problem), get the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• My problem with the Java Applets

  Hi all

  I have a problem with these java applets. When I go to this link and want to see the java applet running from this site, as I face n ° 1 error below I press OK, and then I get the error no. 2.
  I disabled my AV (KIS 2013) and the Windows Firewall, but I still don't see the applet.
  Is it possible to fix this problem please?

  n ° 1:

  

  n ° 2:

  

  a brief search for shows "application blocked by security settings" that you might need to change the security level in the java console.