Problem with Toshiba USB DVB - T TV tuner

Similar Questions

• Toshiba USB DVB - T TV Tuner Driver XP

  I have a problem with my laptop Qosmio Toshiba USB DVB - T TV Tuner and... I have install the Savvy TV as stated but when I insert the usb in the system tuner always respond with "unknown device" and won't let me assign the correct drivers.

  I tried to download the latest version of SavvyTV and follow the instructions in http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=8164&tstart=15 (restart every time and install in a good way) but the problem is always the same: usb not recognized and cannot be manually set the correct driver for the device.
  I tried also to delete the Windows registry with a name like trendy clientele, o usbdtv.inf without result after the reinstallation of the program.
  Could you please help me or suggest something?

  Thank you very much.

  Hello

  Please visit this site:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Here, you choose:
  The USB Options TV Tuner DVB - T tuner Windows XP options

  You will find two versions of different tuner driver. The latest version of 1.0.14.1218 is from 01/02/06. Try to install it. Maybe it helps.

• PC crashing with TOSHIBA USB Hybrid Tv Tuner

  I have recentlly bought a USB tv tuner hybrid Toshiba. I have connected the device to my laptop before installing the software (which must have read the manual...). However, after the cancellation of the device installation wizard I installed the software and plugged the unit... the BONE has found the new device with the following notification of the ball: "USB tv tuner hybrid found (without firmware)" and a moment later my pc crashed with a blue screen and then stop. I tried to re install the software, update the software (savvy tv 2.0) and nothing happened. My laptop kept crashing the same way... I called Toshiba technicians, suggest that i uograde firmware of the laptop... (? maybe they mean the motherboard BIOS? who knows...?).

  The laptop is not a Toshiba. However, it meets the minimum requirements. My OS is Windows XP SP2, my graphics card is ATI Mobility Radeon 1600 and my USB ports work fine with everything. I use an external display instead of the laptop screen (don't know if its relevant...)

  Any help is welcome because I am this close to return to the where I bought this product and request a refund.

  Thank you.

  Hello

  I have USB DVB - T TV tuner and I checked with WXP and Vista. Works well. I don't know what operating system you are using, but maybe you need to download the latest version 2.0 of the Toshiba download page.

• I need drivers for Toshiba USB DVB - T Tuner

  * Toshiba USB DVB - T Tuner *.

  * P/N PX12311E-1TVD *.

  Please if you can help me to answer me bye can e-mail address

  * thx *.

  I wonder why you didn t receive all the drivers and software package together this TV tuner device?  :|

  However, Toshiba drivers can be downloaded from this page:
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  There you have to choose from;
  Options of-> office-> TV tuner accessories

  There, you can choose between the hybrid USB TV tuner and DVB - T tuner.

  Good bye

• My computer Toshiba Satellite keeps the 'blue screen' and that is to say that it is caused by "a problem with a USB driver. How can I fix it?

  Resolve a problem with a USB driver

  You have received this message because your universal serial (USB) bus driver caused a stop error, also known as a blue screen error. This error means that the computer has stopped abruptly to protect against potential corruption of data or loss.

  What is a driver?

  A driver is software that allows your computer to communicate with hardware or devices. Without drivers, the hardware you connect to your computer (for example, a video card or a webcam) may not work properly.

  The recommended steps that follows can help to eliminate this problem, or at least reduce its frequency. Try them in the order listed. If a step cannot solve or reduce the problem, then move on to the next.

  Steps to fix this problem

  1. Adjust your computer's power settings

     The following power settings may help reduce the frequency of this problem.

     1. Turn off the USB selective suspend setting:

        1. Click on the Start button .

        2. In the search box, type power options, and then press ENTER.

        3. Find the plan selected, and then click change plan settings.

        4. Click change advanced power settings.

        5. Double-click the USB settings , and then double-click on USB selective suspend setting.

        6. Make sure that the USB selective suspend setting is disabled. If it is enabled, click it and select disabledand then click OK.

     2. Disable power saving mode (computer portable computers only):

        1. Click on the Start button .

        2. In the search field, type power options, and then press ENTER.

        3. Under Preferred Plans, ensure that High Performance is selected, and then close the window.

  2. Look for an update of the BIOS for your computer system

     Several computer manufacturers whose computers have this problem published BIOS updates to fix this known issue. Contact your computer manufacturer to see if a BIOS update is available for your computer model.

     What is the BIOS?

     The basic input/output system (BIOS) is software built into a computer that runs when the computer is turned on. Among other things, this software starts the operating system, and supports the transfer of information between hardware devices (such as the keyboard and the monitor).

     How can I find the manufacturer of my computer?

     Click on the Start button , type msinfo32 in the start search box and press ENTER. The manufacturer of your computer is listed as the manufacturer of the system in the right pane of the system information window.

     Click here to go online to see the contact information for most of the computer manufacturers

  3. Download and install the latest updates and drivers for your computer

  It's a good idea to periodically check the updates of driver for your computer, especially if you added new hardware recently, such as a USB hub or other USB device.

  What is a USB hub?

  A USB hub is a device with multiple (USB) universal serial bus ports. USB ports are narrow and rectangular connection points to connect USB devices to your computer. A USB hub is used an Extender of port or port replicator, providing more USB ports to run from a USB connection on your computer. USB hubs can be external devices that connect to a USB port, or they can be internal devices built into your computer.

  To check for driver updates:

  1. Use Windows Update to find and install updates:

     1. Go online to Windows Update

     2. Click the check for updates in the left pane, and then click view available updates.

        What happens if I see any updates available?

        • If you see you receive updates: managed by your system administrator, you can try clicking on the link to check online for updates from Microsoft Update or Search online for updates from Windows Update, but you should maybe contact your system administrator to get the desired updates.

        • If you do not see the message above and no update is available in Windows Update after clicking on the link check the updates in the left pane, then the available updates have already been installed.

     3. Select the driver for your device updates and more updates to install.

        Note
        We recommend that you install all Important updates and recommended. These updates improve the security and stability of your computer.

     4. Click on install. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  2. If you recently added a new hardware device on your computer, go online to the manufacturer's Web site to see if there is an update to the driver.

  3. If you recently added a new program on your computer, go online to the manufacturer's Web site to see if an update is available.

  Steps to work around this problem

  Warning
  These measures are intended to solve a specific problem, but could do so by temporarily disabling or removing some features on your computer.

  1. Try to remove newly added USB devices

     If this issue occurs after adding a USB hub or other USB device, consider removing to see if the problem goes away. If this resolves the problem, contact the manufacturer of the device for the updates or other recommendations.

  2. Do not disconnect USB devices while the computer is to stop or go to sleep

  This problem is known to occur when USB devices are disconnected when the computer is trying to stop or switch mode to 'sleep'. This is common with cell phones, especially those with a docking station, as docking station can act as a USB hub. The frequency of this problem could be reduced by allowing your computer to completely close or completely in sleep mode before detached from its docking station or unplug it or the docking station USB devices.

  If you know which USB device is causing the problem

  It may be possible to prevent the Blue error screen by choosing the option remove the device safely in the Notification area, before putting your computer into sleep or Hibernate mode.

  1. In the system tray, click the icon to remove the device , select the USB device that you think that the origin of the problem and then click OK.

  2. Do not physically remove the USB device.

  3. Perform the action which resulted in the Blue error screen, so that was taken the functioning of your computer after the mode standby, hibernation, or, in the case of laptops, close the laptop computer or place it in a docking station.

     1. If the Blue error screen persists, it is likely that the problem is with another USB device. Try this procedure using other USB devices until you find that at the origin of the problem.

• If the Blue error screen disappeared, you have probably identified the device causing the problem. Contact the manufacturer of the device for more information on how to solve this problem, or use the option to remove the device safely to work around him.

Note
Depending on the manufacturer and model, some USB devices will become available automatically when you resume using your computer. Others will require that first disconnect you physically and then plug back in front, they will be recognized by the computer. Check the system tray to see if the USB device that you removed safely become available when you started to use your computer again. If she did not become available automatically, then physically unplug it and then plug it in again.

This is the screen it gives me. Help, please! If problem fixed, will BE AWARDED!

Hi ChayceSteffiare,

For instructions on solving problems with USB devices, see the following article:

Tips for solving problems of USB devices

To fix blue screen errors, see the following article:

Pick up the pieces after a computer crash

See also:

Optimize Windows Vista for better performance

Ways to improve your computer's performance

• Ask for help for USB DVB - T TV TUNER: error starting of the installation

  Hello
  I bought a USB DVB - T TV TUNER S.N. = 2105060308068
  There is a problem.
  When I run the Setup it says "There is a problem with mpegaudio.dll, that the file has not been copied"
  When I run the program it says 'unknown error. "Error code: 0 X 91000066.
  Help!
  [email protected]

  It seems that the mpegaudio.dll was copied or installed.
  To my knowledge the DV - T USB tuner is delivered with TV software warned.
  I put t why it has not copied, but you should try to reinstall the additional application.
  I think that this software installs MpegAudio.dll .dll file in the windows\system32\ folder and if it s lack the software may not run correctly.

• Problems with Toshiba Flash cards

  I have problems with toshiba flash Cards on my desk and stay there.  It says flash cards, not reponding, but I can't get rid of it.  This utility is really necessary to make my computer work correctly?  How can I get it out of my office?

  Hi Bklawinsky,

  ·         Did you do changes on the computer before the show?

  ·         The other device USB (Universal Serial Bus) have recognized?

  Follow the suggestions below for a possible solution:

  Method 1: You will need to check the updated version of the utility of flash cards on the site of Toshiba, if found, install and check if the problem persists.

  Method 2: If you can't find any update of the utility so I would suggest that you uninstall using programs and features, reinstall it later using the Toshiba website, according to your model number of the computer to download the utility below.

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows-Vista/uninstall-or-change-a-program

   

  Toshiba downloads

  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Let us know if that helps.

• Tablet HP 8 G2 1411: Problems with my USB port on my Tablet

  Problems with my USB port on the Tablet connector. Fees sometimes and sometimes not.

  Hello and welcome to the HP support community!

  Micro USB ports tend to be quite fragile.  A good accidental yank on the cord that connected while can be enough to cause damage.

  If you want to organize repairs, contact HP directly.

  To contact HP directly, click on this link: http://www8.hp.com/us/en/contact-hp/phone-assist.html#section1
  
  Outside the U.S.: http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
  
  WyreNut

• Problem with Toshiba Power Saver Tecra S1

  Hello

  I have problem with Toshiba Power Saver (GST).
  I installed SP2 on my WinXP Pro, and after this operation, all works well. After a few days GST on icon disappear from the task bar. When I open the Console from Toshiba, then GST I can see only incomlete standard dialog box. There is no configuration icons, but initially were, and I set all the settings. Now, there are 4 black boxes (2 small as a small icon) and 2 large as icon bigest at the bottom and a large black on the right.
  I try to reinstal GST, but it had no effect.

  Can someone help me

  Alex

  Hello Alex

  I have never seen anything like it. There is obviously some problems that doesn t allow the graphic illustration of the ATP. The first step is always reinstalling the software. I don't know what you need to do exactly. In my opinion, you should try to remove the GST and SP2. Install SP2 again and after this GST.

  If there is not the worst success solutions are preinstall the device using the recovery CD.

• Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?

  What Mac? (details)

• MCE only receive digital signals with Toshiba USB hybrid TV

  Hi, I have a problem with the USB hybrid TV, I want to use with Windows Media Center, it works fine, but I can see only digital Tv, no cable Tv. If I use the software provided with TV usb I can see digital cable and cable, but with Windows Media Center only digital television.

  Can someone help me please?

  Thank you!

  Luca

  Hello Luca

  Please don't be crazy about me, but you have to understand that maybe it's not possible to use the material in any desired combination. This product is designed for all the cell phones (not only for units with WMCE. Because of this manufacturer is it comes with own software.

  As you can see, it also works with WMCE and also digital. In my opinion it's the big thing. By the Way: AFAIK WMCE supports analog and digital TV by use of the antenna). Try Please also check some support WMCE or even forum WMCE site.

• I have a problem with my USB and I need a tool to monitor and diagnose the USB to know what is the problem?

  I have a problem with my USB (after a long time of continuous working it stop working and I need to unplug and re-plug the device), I want a tool to diagnose and remedy?

  You can run this tool:

  http://support.Microsoft.com/mats/Windows_USB_diagnostics/

• I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I installed the download tool usb/dvd windows 7, but after you have selected the iso file when I insert the USB stick and refrecing, it does show that "no usb drive compatible' what is the problem with my USB

  I have sandisk cruzer blade USB key

  Hi Rohit,

  Thanks for posting your query in Microsoft Community Forum. I understand that your USB drive is having problems of compatibility with your computer, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You did it any significant hardware or change software on the computer before this problem?
  2. When do you get exactly the error message?
  3. Have you tried to connect to any other computer on this flash drives?
  4. Your USB key works on other computers or have you tried to connect to different USB ports on this computer?
  5. Is the pen drive getting detected in the case or you are able to access the drive folder in the window of the computer ?

  The question may arise if the currently loaded USB driver has become unstable or damaged, or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.

  Method 1:

  Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.

  • Hardware devices do not work or are not detected in Windows
  • Diagnose and automatically fix the Windows USB problems

  If method 1 does not work, try Method 2.

  Method 2:

  Remove and reinstall all USB controllers.

  1. Open Manager devices by clicking the Start button, click Control Panel, click system and security, and then, under System, clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. In the list of the categories of equipment, locate and expand Bus USB controllers.
  3. Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
  4. Restart the computer and let the USB controllers get reinstalled.

  Plug in the removable USB device and test to make sure that the problem is solved.

  If the problem persists, go to method 3.

  Method 3:

  This method will install the latest drivers from device to your USB device.

  1. Click the Start button, type Windows Update in the search box, and then click Windows Update in the results pane.
  2. Click find updates. When the scan finished, click optional review updates.
  3. Click the check box next to the update, and then click install updates.
  4. If you are prompted, read the license agreement, then click I agree.
  5. Follow the instructions on the screen to download and install updates.
  6. If you are prompted, restart your computer.

  More information: Update a hardware driver that is not working properly

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• 3 laptops different ALL been facing intermittent problems with the USB ports.

  We have 3 laptops at home, running 3 different versions of winsows 7... Home, Professional and Ultimate. They have in recent months ALL given intermittent problems with the USB ports. A device that worked on a port stops working. It may or may not work on another port. A week later it could very well lead again on the port that wouldn't work. This applies to all types of devices.

  A few more questions:

  Is there a USB device that you use with all three computers?

  This problem occurs with all kinds of USB devices?

  The is the problem with all the USB ports on each laptop?

  Have you tried to reinstall the USB drivers? As in, uninstall via the Device Manager, restart your PC and allowing Windows to reinstall?

• Problem with Toshiba E.Steel HD 500GB USB 3.0

  Hello guys, yesterday I bought a Toshiba HD 500 GB USB 3.0 e.Steel but I have a problem, if I connect the HARD drive to the USB 2.0 to my laptop hard drive works perfectly, but if I connect to the laptop on the USB 3.0 detects the hard drive (sometimes) and it only works for a few minutes , but if I copy files from drive is disconnected almost immediately... you think it's a problem with the HARD drive or the laptop?

  I have a laptop qosmio x 770 with a one month old
  USB 3.0 port works perfectly with any other USB 2.0 device
  I have the latest driver
  I have windows 7 64 bit

  > I have the latest driver
  > I have windows 7 64 bit
  The latest driver do you mean exactly?
  Are you using the original preinstalled Win7 you have with your laptop (factory settings)?