Problem with users simple Javascript running in an Active Directory environment

Similar Questions

• Problem with a simple integral

  Hi all

  I have 2 problems with a simple integral, and I do not understand how the first HP solves.

  My first problem is that if I add a constant before my variable, the answer becomes really weird.

  My second problem is that if I just change one letter (q becomes Q), the answer changes completely.

  I am attaching a picture of the calculations so that you can understand my problem.

  Thank you very much for your help

  Kind regards

  Xavier

  When you type wx you now have a variable named "wx" - not w * x which is what I suspect you intend. You must manually add a multiplication between them.

  When you use the Q, you are actually using the predefined global real variable that is most likely the value 0. If you've stored 2 in Q, I suspect that you'll get a different result. Remember that all variables in capital letters from A to Z and THETA and already defined as real numbers. VARS-> HOME-> REAL-press and you will see them.

• Problem with user accounts

  I'll put up three new Lenovo 3000 N200 laptop for three employees and have problems with user accounts in XP Pro. When I go into the initial Setup, I enter the name of the employee, and it is configured as a user account. When I start the laptop, she prays for before administrator password XP will start. Start XP, I am not able to change to a different user account, when I select Logoff on the start menu, I have one is not given an option to switch users. When I go to user accounts in Control Panel, I see the user account that was created, I can change the name & photo, but I can't delete it. I can create a new account with a different name, but she plays the same thing. The administrator remains visible - it is supposed to be hidden if there is another account. It's like XP does not see other user accounts. I am at a loss to know what to do. These are new machines and all three act in the same way.

  Help please!

  I think I solved my problem - on the user accounts page there is a link "change the way user accounts log on or off. When I clicked on it I got a message saying settings could not be changed due to a layout in offline mode. When I changed this setting, I was able to select the types of user switching, and my other user accounts became available.

• Problems with HTTPS and javascript widgets

  My HTTP site works fine, but when I switch to HTTPS, I get the following error...

  MuseJSAssert: Error calling the function switch: TypeError: E.split is not a function

  I have even tried to create a simple page with nothing else than a javascript widget, and I still get the error when you use the HTTPS version.

  FYI - I upload my pages using the 'upload to the FTP host.

  Muse and HTTPS is not compatible?

  It is more likely a problem with your server as a problem of cross-site script because the HTTPS protocol uses a folder or a different domain and browser security mechanisms as long as the server itself remove access to the script so. If there is a specific secure folder on the server, import is your files, otherwise, you will need to set an option in the web interface to allow HTTPs and normal HTTP access to your folder.

  Mylenium

• problem with user password change request

  Hi all
  
  I'm about to ask a question that I don't have much info. I'm not experienced with oracle forms or States but one my customer use them, my client decided to change the user password request forms and did. After that, developers are looking for config files and change the passwords in files of that too. is the application works fine but has reports of problems. as I said, there are two ways to run reports, web and run_product. When the URL is used, reports work well, but in forms (fmb) screens when the run_product procedure is used, they received the error "name of username/password invalid.
  
  even if they change the password user return application, there always the same error. should consider what could be the possible error and what are the files? I know, that it is forms 6i application.

  If your customer base is 11G, this could be a problem with the passwords case-sensitive. Try to set a password with only UPPERCASE letters.

• Problem with bit of JavaScript that DreamWeaver is writing

  I'm having a problem with the code that DreamWeaver (CS3) is written. I'm fairly certain that the problem is in a small piece of JavaScript code that is compose of DreamWeaver.
  
  It is a pretty complex problem, so patient with me.
  
  First of all - what I'm trying to move: when a page on my site (the - oilman.com), I want a link that opens a new window in the store online at another site (AMSOIL.com). I need to leave the page on my site open and open this page "keep". Firstly that it works fine, using the 'open window' 'behaviour' in DreamWeaver. If someone wants to change windows (or tabs) and return to my page, also - leaving the window 'save' the problem is set up to occur. If back on my site, you click this account or a different link that goes back to the 'Bank' on the same page or on another page to AMSOIL.com - the "Save" window goes to the correct page, but "store" window does NOT come up on top. When they click on a link to return to the 'Bank' I need 'store' window to get to the top. If they have previously put something in the basket and come back and add something to the cart in the "store" coming from various links on my site that the 'Bank' works correctly because I leave it open all the time.
  
  snipets of code that DreamWeaver wrote for my site (the - oilman.com):
  head:
  < script >
  <!--
  CSAct [/ * CMP * / '129AABC1'] = new Array (CSOpenWindow, / * URL * / ' http://www.amsoil.com/redirect.cgi?zo=52257 & page = store ', 'store', 0, 0, true, true, true, true, EU tr, true, true);
  CSAct [/ * CMP * / '129AAC63'] = new Array (CSOpenWindow, / * URL * / ' http://www.amsoil.com/redirect.cgi?zo=52257 & page = store ', 'store', 0, 0, true, true, true, true, EU tr, true, true);
  CSAct [/ * CMP * / '10D39F40'] = new Array (CSOpenWindow, / * URL * / ' http://www.amsoil.com/redirect.cgi?zo=52257 & page = storefront/sso ', 'store', 0, 0, true, true, tru e, true, true, true, true);
  /
  function MM_openBrWindow (theURL, winName, features) {//v2.0
  Window.Open (Theurl, winName, Features);
  }
  ->
  < /script >
  
  Code 2 different links using this script:
  "" "< a href =" http://www.amsoil.com/redirect.cgi?zo=52257 & page = storefront/sso " target ="store"onClick =" MM_openBrWindow (' #', 'Bank', "") "" csclick = "10D39F40" > buy now < /a >
  "" < a href = " http://www.amsoil.com/redirect.cgi?zo=52257 & page = store" title = "AMSOIL Store to AMSOIL.com" target = "store" onClick = "MM_openBrWindow ('http:www.amsoil.com/redirect.cgi?zo=52257 & amp;)" "" page = store', ' stor-e ",""")"" > on line store < /a >
  
  I think what I need is a javascript longer. Instead of just "window.open" I need an 'if', but my knowledge of javascript is very, very limited.
  I need to check if the window called 'keep' is open then 'focus', or if it is not open to open the window named "keep".
  This will fix my problem? If so, please help me to write lines of code to do.
  If this isn't the solution, what is the problem and the solution?
  
  A separate but related matter: If you look at different links in the two codes, in calling one of them uses a page reference "null" and another repeat the full link of the href = attribute reference. Both seem to work, but which is the right or the preferred syntax. My guess is that there are some browsers this will give a problem, but where is the favorite.
  
  Don Dawson
  mailto:[email protected]

  Thanks for the replies. I solved the problem. Because of a storm called Fay who dumped 20 "of rain here - power came out internet for days, road cut in 3 places to get out of the House - it is low priority for a week.

  Yes, I have quoted wrong snipets that had some left over code Go-Live, but it was not causing my problem. I had worked in the from pages before Go-Live and new pages in DreamWeaver that all did the same thing.
  The small piece of script that DW wrote that left me the problem:

  
  function MM_openBrWindow (theURL, winName, features) {//v2.0
  Window.Open (Theurl, winName, Features);
  }
  //-->
  

  The necessary patch adding a line to the function (and I don't know there are a number of other ways to do it too, but this one seems the most simple):

  function MM_openBrWindow (theURL, winName, features) {//v2.0
  Focus on the shop window
  toTheStore = window.open (theURL, winName, features);
  toTheStore.focus ();
  }

  'Design' DW CS3 mode itself left me short. After setting up with the "Design", I have to go to the 'Code' and correct.

  Thanks again to all who watched and considered my problem.

• Problem with user access rights invited after the installation of el capitan (10.11.6)

  After that I installed OS X El Capitan (10.11.6), I can't change the way the guest user can access applications.

  When I change the usage rights of the guest user in Control Panel (user admin), everything's fine. Safari is the only application that I leave available. But then, nothing has really changed and guest user can use all applications. When I make the change, the guest user is disconnected (otherwise changes cannot be made).

  Could someone help me in this problem.

  There are problems with Parental controls do not stick in El Capitan.

  There is a long thread about this; of some people have found workaround solutions, but they do not always seem to work.

  OS X El Capitan: controls parental NOT work

• Problem with user API 5.0 interface components

  Hello!

  I have a problem with the user interface components.

  My application needs of the analogues of the toolbar and PaneManager (as in api 6 and higher) in BB API 5, but I have no idea how to make them.

  Please, need help

  Toolbar can be made with evenlyspacedhorizontalfieldmanager in the Advanced UI package available on the java dev site of bb.

• Network problem with HP DL 380 running ESX

  Hi @ all,

  I m having a BIG problem with a HP DL 380 and ESX 4.0. The setting is as follows:

  1. physical NIC is on the DMZ Port of the firewall, the 2. one is on the switch (simple gigabit switch).

  one of the virtual machines on this server should communicate ONLY on the NETWORK card on the demilitarized zone, but somehow he doesn´t work.

  help the plt

  Bone

  OS (if it's still bone),

  Setup in your jpg looks ok.

  To dig deeper, I need to understand the issue see you "if I turn on the server 'DMZ' is as if it is on the first vSwitch '

  Can you explain the issue you are facing. Is this a connectivity problem. Maybe it is related to the configuration of the physical switch.

  André

  If you are having trouble to explain in English, feel free to send me a private message and describe the problem in German.

• Problems with users, administrators, etc. on Toshiba laptop which gave me

  Given a portable Toshiba with Vista.  Trouble with users, Administrator/s, etc..  Was poking around and now I'm lost.  Help please.

  Hello

  If you receive a computer or laptop to the safest opportunity and the best way to go is to reinstall the operating system

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

  _________________________________________________________

  Also read this information on how to use Vista;

  Windows Basics: all topics

  http://Windows.Microsoft.com/en-GB/Windows-Vista/Windows-Basics-all-topics

  and this link too

  http://www.vista4beginners.com/

• Problem with the simple query.

  Hi all

  I am facing problem with the query below

  Select A.COL1, A.COL2

  B.COL1, B.COL2

  FROM TABLE1 A

  TABLE 1 B

  WHERE A.header = '123'

  AND B.header = '123'

  AND nvl (A.COL6, 'ABC') = 'ABC '.

  AND NVL (B.COL6, 'DEF') = 'DEF '.

  Basically, my requiremenyt is: I have only one table, TABLE1 here, which has a line two lines (for the same header) as "ABC" and another is "DEF". Table 1 has two columns (col1, col2) that should be displayed for both lines.

  When the header has two records in table1 top query works. and but if I do not have a record for any header example there are a record for "abc" in col6 only. so my query above does not work because there is no record for 'DEF' in col6. But I want to again request to fecth the output (for b.col1 and b.col2 should have null values)

  could you pls suggest me how to get the 4 columns.

  Thanks in advance

  Kind regards

  UVA.

  Try to place the status of outer join on column: analytical_criterion_code as

  and nvl (AUDIT.analytical_criterion_code, 'AUDIT2') = 'verification2. '

  .

  .

  and nvl (TRANS.analytical_criterion_code, 'TRANS2') = 'TRANS2.

  In the sub query based on the opinions that you have given in post # 1, although there is no value "DEF * ' for col6 due to the condition of outer join on b.col6 (+) line is extracted with b.col [1,2,3] as NULL values. Try to remove the (+) sign b.col6 and test.

  with t as)

  Select 111 col1, col2 'aaa', 'ABC' col6 123 header of all the double union

  Select 222 'bbb', 'DEF' col6, 123 double header

  )

  q as (select 123 double header)

  Select A.COL1, A.COL2, A.COL6

  B.COL1, B.COL2, b.COL6

  q.header

  T a

  t b

  q

  where a.col6 (+) = 'ABC '.

  and b.col6 (+) = "DEF."

  and q.header = a.header (+)

  and q.header = b.header (+)

• problem with the slide show running javascript on a page that uses an inclusion

  Hi all

  I'm new to PHP, and if this is the wrong forum to post, if you would redirect me please, I would be grateful.

  I have a file that I call menu.php.  Inside this file, I have a menu accordion based on jQuery.  It works very well. I use an inclusion in another page, called "chair.php." As a first step, the menu jQuery works very well in the chair.php page, and I use <? PHP include ("menu.php");? >.  However, I'm running problems when I try to add a jQuery slideshow called 'pikachoose' in the chair.php page.  It seems that the slideshow cannot work properly if the menu is there...

  The code in the head for the "menu.php" tags is as follows:

  < head >

  " < script type =" text/javascript"src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "> < / script > .

  < link rel = "stylesheet" href = "css/960_12_col.css" type = "text/css" media = "screen" / > < / script > "

  < script type = "text/javascript" src = "js/menu.js" > < / script >

  < / head >

  The code used in the head (and some of the body) of tags in the chair.php is as follows:

  < head >

  < link type = "text/css" href = "reg/bottom.css" rel = "stylesheet" / > "

  < link type = "text/css" href = "css/960_12_col.css" rel = "stylesheet" / > "

  " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "type =" text/javascript"> "

  < /script >

  "< script type =" text/javascript"src="reg/jquery.pikachoose.js "> < / script >

  < script language = "javascript" >

  ($(document) .ready)

  function () {}

  $("#pikame"). PikaChoose({carousel:true});)

  });

  < /script >

  < / head >

  < body >

  <? PHP include ("menu.php");? >

  etc etc.

  < / body

  < / html >

  With the inclusion, the slideshow shows just like a series of images in a list.  When I remove understand it and keep all the same code, the slideshow works as it should.

  Is there a reason why the pikachoose slideshow cannot run the menu.php SEO include is in place?

  Thank you

  Rachel

  Sorry... I got it.  I had to remove the library jQuery from the menu.php file.

• Problem with Simulink model dll running on target RT

  Hello!

  At the beginning I specify software and hardware that I use:

  LabVIEW 8.5

  Simulation Interface Toolkit 4.0.0

  Microsoft Visual C++ 6.0

  MATLAB 7.4.0 (R2007a)

  NEITHER cRIO-9014

  At first, I did a simple Simulink model (Sine generator, gain and an outdoor sink), then I started with vi empty and abandoned command digital for the gain and the waveform for the sine table. I grabbed SIT Connection Manager and that you have chosen Simulation Environment case. Then I loaded a template file, the mapped controls and indicators. Everything worked like a charm. Problems started when I tried to turn on an RT target. Maybe I'll explain step by step what I did and after the error at the end.

  1. I created a dll from a MATLAB simulink model file. I selected in time real workshop one C language and target to "nidll.tlc". The I compiled without error.

  2. I entered LabVIEW SIT Connection Manager and changed the host execution target in real time. File browser has popped up and I selected the dll already made my template file.

  3. in Add target devices on window, I chose 'existing or peripheral target' and I chose in the other menu in time real CompactRIO. There was my compactrio system, I chose it and LabVIEW began to search for devices.

  4. after that, I clicked the "Ok" button in the SIT connection manager.

  5. I clicked the run button before my vi file panel and LabVIEW began deployment.

  And here the deployment failed with the following error message:

  Deployment of 192.168.1.2 (parameters target successfully deployed)
  Deployment compatOpenFileOperation.vi (5.35 K)
  Deployment of SIT copies values from Replay on Inports.vi (10,96 K)
  Deployment of SIT expand newspapers Signal Names.vi (4.99 K)
  Deployment of SIT PostOutputs.vi
  Could not download SIT PostOutputs.vi
  LabVIEW: Unable to load the shared library SITs.outostOutputs:E on the target RT device.

  I tried to do everything once again and got a little different error message:

  Deployment of 192.168.1.2 (parameters target successfully deployed)
  Deployment of common access to specific Path.vi (22.25 K) path
  Deployment of SIT runtime DLL query.vi
  Could not download SIT runtime DLL query.vi
  LabVIEW: Unable to load the shared library SITs.out:TaskRunTimeInfo:E on the device target RT.

  What I am doing wrong? Any ideas? I will be extremely grateful for the ideas!

  Best regards

  Pawel

  SIT 4.0 does not support VxWorks targets as your cRIO. SIT 5.0 was the first version to have any level of support for this.

  I would recommend contacting support to discuss a possible workaround solution. If they have questions, you can reference this post on the forum and they can contact me. I hope this helps.

• Several problems with a simple replacement of the subset of table

  I'm new to LabVIEW and I try to teach me how to use it.  As you can imagine, I'm running into a few barriers.  The code that I'm including embodies many of my problems.  If someone can explain to me how to improve this code, I would be grateful.

  Copy the following code is a simplified version of a more complex code, that I'm writing.  In the simplified code, I have a control ('VALUE') that I would like to register at different locations in my table of 5 x 3.  To do this, I tried to make a 5 x 3 constant I could replace it with the value of the control.  The code does not work as expected and this is my specific problems:

  1. I can't initialize the array constant (the one I intend to crush).  I can only initialize the first row.  Based on the help files, I thought I should be able to initialize it by clicking on the boxes in the chart on the block diagram and entering values.  But it doesn't seem to let me do this.  Don't know if there is a special way to open when more than 1 dimension is involved?

  2. my slider controls are intended to establish where in the table to place the element.  But is not no longer works.

  3. I can't understand how properly to a code which has a while loop integrated in a while loop.  Someone recommended using a structure of the event, but as a beginner, I will have trouble to know how I would enact who.  I tried to play with the settings of locking/switching the button stop, but that did not work, either. The problem seems to be that, if I am inside the while loop, the program does not see my stop command.  Is there a way to connect as the stop button works, regardless if I'm inside the another while loop?  If not, is there a way to accomplish what I want in the smallest loop without using a while loop?  If I used a structure of the event, how would I created an 'event' to tell the program to store a new data point in the array?

  Thank you.

  Jessica

  Jessica,

  Also note that in LabVIEW array indices are zero-based.  If the values of the row index can be 0, 1, or 2.  If you want your users to see 1, 2, and 3, then put a function decrement between the terminals of the cursor and the function replace table subset.

  Lynn

• Problem with Admin Windows xp RUN As...

  1. What is the exact error message when you try to run it on Windows XP?
  There is not an error. Just not running. Key program accepts and stored, the AutoRun program does not work.

  2. is the application works properly in Windows 7? Yes, exactly
  Key saves not only the program, it does not matter.

  RUNNING under...: with 'run as...' "is played.

  A: If no admin password, what is the solution?

  B: and if with ctrl + alt + delete, we have been unable to connect to Admin, what is the solution?

  Why am I just click 'RUN AS... "I chose, in the admin password must do, even if you do not have the admin password.
  Notice and when I enter the admin password, then the warning is not ' run as... '. »

  What is the problem? You never know how many people go that route. Admin password must be an administrator to run to run as...?

  If you do not know the admin password, you will not be able to use the option "run as" administrator. It is recommended to run as a Standard user, and then use the ' run as ' when you need to do an administrative task. So, you have the administrator password to perform this task.

  It works as expected.