Problem with W2008 64-bit

Similar Questions

• Problems with the 64-bit on Pavilion a6620f Vista Factory restore

  I had a hard drive failure and restoration on a new hard drive. The original HD is a 500 GB Seagate Barracuda 7200.11 model ST 3500620AS. The new HD is a 500 GB Seagate Barracuda 7200 model ST 3500641AS - RK. I bought a set of restore for this HP computer disks.

  First problem was that disk 1 does not start from the internal CD/DVD drive. My Seagate drive boots fine on the same drive! I used an external USB CD/DVD drive and restore disks worked well on that. I went through the process of factory restore and in the end, I get an error message "installing Windows could not configure Windows to run on this computer hardware." I tried to change the BIOS setting from ACHI and IDE to SATA RAID with no luck. I tried to unplug the USB CD drive before the first reboot. That no longer works.  I unplugged the internal CD drive and tried different combinations with no luck. Need help I have run out of things to try! Does anyone have any ideas/thoughts?

  Hello:

  I don't know how you can get your recovery discs to work.

  Looks like you have tried everything.

  I had problems with mine too and got the same error on a HP Elite 8200 desktop computer business

  It was the first time I've ever had a problem with recovery disks.  It's very frustrating.

  I have a workaround if all goes well, you can use to get Vista on your PC...

  If you can read your 25-character product key MS, you can make your own Windows Vista installation disc. You just download the 3 files you need on the link below and read all the instructions to create a Setup bootable DVD disk using imageburn.

  It was not so hard to do. I burned both the disk of 64-bit and 32-bit disk in case I ever need them.

  I tested both of them (just before going forward with the actual facility) and they seem to work perfectly.

  Apparently, when you enter the product key, he knows which version of Vista you have.

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/3317.2-3-Microsoft-Windows-VI...

  After you have successfully installed vista, you can download the drivers you need your PC support and driver page.

  Paul

• Problem with Vista 64-bit update, windows

  There are several optional updates "available," according to the update of Windows.  However, I'm not able to click (left or right) to select one of them.  Only if I select the box "all" upwards by securities (to the left of the name) it works, but then it checks ALL updates, including all 34 languages in option I want.

  I had to interrupt updates yesterday (it is a new system with Windows Vista Ultimate 64 bit) because of the length of time that it took, so several updates in the history to show that 'failed '.  I wonder if what has created the problem that I have now?

  Hi LindaDBca7,

  Thanks for posting your question on the Forum of answers.

  My first suggestion would be to use system restore to restore your computer to an hour before the beginning of the question.
  Maybe before the updates were interrupted.
  Here is an article on how to do it:

  http://windowshelp.Microsoft.com/Windows/en-us/help/9f6d755a-74bb-4A7D-A625-d762dd8e79e51033.mspx

  After restoring, see if get you the update selection function.

  Impatience back on your part.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Re: Qosmio F50 - problems with Win7 64 bit CPU

  Hello

  The processor working at an age very high % of the maximum capacity, much more than compared to Windows 7 32 bit. Anyone facing similar problems?

  Thank you

  Have you tried to optimize the operating system preinstalled?
  Have you checked all of the running processes?
  Which of them needs so much CPU performance?

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• Problem with installing 64-bit Berkeley DB on Solaris 10

  Dear technicians,

  We ran the following command for installing Berkeley DB 64-bit on a Solaris 10 box.

  export LD_LIBRARY_PATH = / usr/sfw/lib/64

  ./buildall.sh gcc - c x - g ++ - with-set-env = "CFLAGS =" - m64 - mcpu = v9' CXXFLAGS = "" - m64 - mcpu = v9 - L$ PWD/install/lib 'LDFLAGS =' - m64 - mcpu = v9 - L$ PWD/install/lib ' "- enable-java - prefix = / opt/webapps/blah/blah /"

  This command has run for about 10 minutes and stopped after producing the below error

  F $depbase MV. TPO $depbase. PLO

  In file included from usr/local/include/curl/curl.h:35,

  of. / xercesc/util/NetAccessors/Curl/CurlURLInputStream.hpp:25,.

  from xercesc/util/NetAccessors/Curl/CurlNetAccessor.cpp:26:

  /usr/local/include/curl/curlrules.h:143: error: table '__curl_rule_01__' is negative

  Error code 1

  make: Fatal error: command for target 'xercesc/util/NetAccessors/Curl/CurlNetAccessor.lo' failed

  Course directory /opt/webapps/appdata/sharedlib/BDBInst/dbxml-2.5.16/xerces-c-src/src

  Error code 1

  The following command caused the error:

  failcom = "exit 1"; \

  for f in x $MAKEFLAGS; do------.

  case $f in.

  *=* | --[!k]*);; \

  (* k *) failcom = "failure = yes; \

  ESAC; \

  fact; \

  dot_seen = no; \

  target ='echo all-recursive. SED s/recursive / /'; \

  list =' '; for subdir in $list; do------.

  echo "Making $target in $subdir; \

  If test '$subdir '='.'; then.

  dot_seen = yes; \

  local_target = "$target - am"; \

  on the other.

  local_target = "$target"; \

  FI; \

  (cd $subdir & & make $local_target).

  || EVAL $failcom; \

  fact; \

  If test '$dot_seen' = 'no '; then.

  "$target - am | Exit 1; \

  FI; test - z "$fail."

  make: Fatal error: failed command to target "all-recursive.

  We do not know how to go further. Can someone please? If I need more information, please ask.

  Thank you

  Amit

  We have been confronted with questions when Curl libraries have been used to create libraries of NetAccessor (shown highlighted below)

   

  /usr/local/include/curl/curlrules.h:143: error: table '__curl_rule_01__' is negative
  Error code 1
  make: Fatal error: command for target 'xercesc/util/NetAccessors/Curl/CurlNetAccessor.lo' failed
  Course directory /opt/webapps/appdata/sharedlib/BDBInst/dbxml-2.5.16/xerces-c-src/src

  Net accessor is used to access network resources (we don't use in our project). Thus, the command line to create BDB pots had to be modified, in order to avoid the creation of libraries NetAccessor.

  By Xerces documentation, we also used the -with-xerces-conf = ""-disable-network ' argument to build bdb jars. "

  It worked after that.

  It addressed again probably not the root cause. We can live another day for now.

  Thank you

  Amit

• kindly guide me on my problem with the 64 bit on 32-bit OS

  Hi guyzz

  My problem is that I m install windows server 2003 32-bit on a machine. the machine can also support 64-bit so after installation of 32-bit windows server 2003, I install VM workstation and then, on that, I have install windows server 2008 r2 64-bit but it gives an error... now I know logically, we cannot run 64-bit OS on 32-bit host os STRP, but I wanted to make sure. so is it true?

  What CPU do you run?  See below for the supported Intel CPU. If you host OS doesn't support VT, you will not be invited running 64-bit.

  http://Ark.Intel.com/VTList.aspx

• Problem with Vista 64-bit

  I run Vista Home Premium SP2 64 bit, to install software but one have bad message that need this 32-bit software tell me, what I can do to run this software?

  Sunday, November 14, 2010, 17:31:15 + 0000, Eng.Huzyfa wrote:

  I run Vista Home Premium SP2 64 bit, to install software but one have bad message that need this 32-bit software tell me, what I can do to run this software?

  What software is this? It is very rare that a program will run under
  Windows 32-bit but not 64-bit, but if this is the case, you can not
  install it.

  Ken Blake (MS-MVP)

• problem with a 32-bit program.

  I have a language program that is a little older (2000) and is a 32-bit executable.  The Toshiba I have runs Microsoft Vista Svc Pack 1 which is a 64-bit.  I read some of the posts previous States that 64-bit SHOULD run the 32... Unfortunately it is not.  I was told so that you could change the version of the operating system, but I unfortunately can't remember where to find these settings.  I really need to be able to use this language program.

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-compatibility-mode/

  If this is not Vista compatible, read the info on the link above.
  It works for some programs, but not all.

  This applies to software programs, NOT hardware drivers

  See you soon.

  Mick Murphy - Microsoft partner

• Problems with CS5 64-bit

  I can not install the 64-bit version of my photoshop product, followed all the suggestions but constantly get this error message

  XIT Code: 6

  -------------------------------------- Summary --------------------------------------

  -1 fatal Error (s), 3 (s), 1 WARNING (s)

  -Payload: {CFA46C39-C539-4BE9-9364-495003C714AD} standard Adobe 2.0 2.0.0.0.

  WARNING: DF029: ARKServiceControl::StartService: standard Service not started or stopped. Current status: Exit Code 0: 0 Service specific exit Code: 0 (Seq 1)

  -Payload: {50D2A553-2839-469E-B87D-86DC8C104745} Adobe Photoshop CS5.1 International English Language Pack_x64_AdobePhotoshop12-en_GB_x64 12.1.0.0 -.

  FATAL: DS003: impossible to extract "C:\Users\Jill_2.TIELK\Documents\Adobe CS5.1\Photoshop\Adobe CS5.1\payloads\AdobePhotoshop12-en_GB_x64\Assets1_1.zip" to "C:\Program Files (x 86) \Common {50D2A553-2839-469E-B87D-86DC8C104745}. Error: Error 2 the system cannot find the file specified.

  ERROR: DW050: the following payload errors were found during the installation:

  ERROR: DW050:-Adobe Photoshop CS5.1 Core_x64: due to a lack of Language Pack installation

  ERROR: DW050:-Adobe Photoshop CS5.1 International Pack_x64_AdobePhotoshop12-en_GB_x64 English: installation failed

  -------------------------------------------------------------------------------------

  See the following help document:

  Exit code: 6, Exit Code: 7 Installation errors.

  http://helpx.Adobe.com/Creative-Suite/KB/errors-exit-code-6-exit.html

• Need help with a 32-bit Thinapp had app to interact with Outlook 2010 x 64.

  It is a specific example, but this isn't the only application that I have a problem with any ideas are welcome.

  Here's the current scenario that drives me bananas.

  The Thinapp - Visio 2010 (32-bit, of course), packed under XP SP3 with Office 2003 is installed locally.

  Target OS - Win 7 x 64 with Office 2010 x 64 installed locally.

  Visio 2010 is running, you can virtually all do it... except, save and send-> Send as an attachment (or take the steps to e-mail).

  Basically, I tried it is difficult to explain the specific error, because they vary from "There is no default mail client installed" as many variations of "Reinstall outlook" absolutely nothing happening.

  The common theme is that the windows installer starts a repair for msmapi32.dll.  Insulation on the folder that contains msmapi32.dll (C:\Program Files\Common Files\System\MSMAPI\1033) is set to writecopy.  I even tried including msmapi32.dll inside the thinapp Visio, but I don't seem to be getting anywhere.

  Send as attachments work fine on XP SP3/Office 2003.  So I was wondering if anyone had some advice to get 32-bit apps to play nicely with x 64 apps.

  I tried to turn on/off WOWon64 in package.ini, I've got the following in my buildoptions

  ChildProcessEnvironmentDefault = virtual

  ChildProcessEnvironmentExceptions = Outlook.exe

  and VirtualiseOutofProcessCOM = 0

  All tips/tricks beyond the ordinary, much appreciated. For now, it's time for me to go home and have a beer.

  Cannot conclude something concrete now.

  It may be a good idea to install 32-bit office natively, and to observe the behavior. This way atleast we can reduce. Take your old installation that has worked for you in the other OS. Deploy it on 64 bit OS and see if it works.

  If there is a communication problem with the 64-bit native applications. We need to varify if that actually works of native office visio and 64-bit native 32-bit.

• Qosmio F60 - 11F - problems with installing the drivers Win7 64 bit

  Hello again.

  I have a Qosmio F60 - 11F and I install * windows 7 ultimate 64 bit *, I installed all the drivers from the Toshiba site,
  and I am facing a problem with some drivers,
  1 - BIOS update v B2.10 - EC1.60 the message "this computer not supported.
  2 - v Eco Utility 1.2.11.64 the message "no supported BIOS.
  3 - PC Health Monitor 1.5.6.64 v & v 1.6.0.64 the message "not support".
  4 - TV Tuner v 2.3.3.31 nothing happens.

  Can anyone help?

  Have you installed the Toshiba value added Package?

  You need the correct PVAT designed for the Qosmio F60 and Win7 64-bit. Take a look at the Toshiba site (section support/drivers).

• Toshiba Satelite a300 Windows 7 32 bit problem with music keys

  Hi, I just installed Windows 7 (32 bit) and I have a problem with the music keys. I can't find driver for it even on the toshiba official site. I had been looking in this and many other forums, but no answers have been good enough to solve my problem. "I've been to the installation of several ' for sure the work drivers" and nothing. It is with my Web camera - no driver. After I installed my touchpad began to be brighten up, but I still can't use the music BIOS update keys. I hope someone can help. Please :)

  Sorry for my English

  Install the Toshiba value added for the A300 (use the PVAT Win7, not the PVAT Vista).

  This site of Toshiba: http://www.csd.toshiba.com/cgi-bin/tais/support/jsp/home.jsp?nav=Download

• Problem with Satellite A300 and Vista 64 bit

  I just bought a Toshiba Satellite A300-1CO model: PSAJ4E-03R015PT, which came with an impressive 4 GB of ram device.
  I knew with Vista 32-bit, only 3 GB would be available, but since I got a license of Vista 64 bit I care, came home and installed it.
  When I looked up the drivers on the toshiba site, no drivers for Vista 64 bit drivers were available!
  I have now 4 GB or RAM available and I also have problems with face recognition software, microfone, sound card, card reader and a few other things.

  I searched the websites manufactors drivers and I managed to get some of these things barely usable, I don't think that it is a SD solution.
  Other laptop brands are made available long drivers for vista 64 bit some of them even for XP 64 bit!

  I would like to know how long take to Toshiba do official drivers available for vista 64 bit on their Web site.

  Best regards, Pedro P.

  I was looking for 64-bit drivers for my laptop, but since this is a new model, the drivers were not yet available. I checked a few weeks later and they were no longer available.

  Just wait awhile, they should be available soon.

• Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STA

  Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...

  aarruunn, you might want to try Windows Installer Cleanup utility.

  http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html