Problem with Vista 64-bit update, windows

Similar Questions

• Problem with Vista was last updated

  I just updated my copy of Vista, and now it is said in the lower right corner "this copy of Windows is not genuine".

  I bought this Dell laptop, over 2 years ago, I know I have a genuine copy of windows, and I've never seen this pop up front.  The only thing that is different is that I have installed the latest update.

  A virus may have infected your computer and remove your activation status.

  You must activate your windows again

  To enable type SLUI in the search box, and then follow the instructions

  You may need your vista product key

  You can activate online or by phone. You need an Internet connection to activate online. Activation by phone requires interacting with an automated phone system.

  You can find your product key on your computer or inside the Windows package installer disk-based.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with Vista 64-bit

  I run Vista Home Premium SP2 64 bit, to install software but one have bad message that need this 32-bit software tell me, what I can do to run this software?

  Sunday, November 14, 2010, 17:31:15 + 0000, Eng.Huzyfa wrote:

  I run Vista Home Premium SP2 64 bit, to install software but one have bad message that need this 32-bit software tell me, what I can do to run this software?

  What software is this? It is very rare that a program will run under
  Windows 32-bit but not 64-bit, but if this is the case, you can not
  install it.

  Ken Blake (MS-MVP)

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• I removed Windows Vista 32-bit and Windows Vista 64-bit installed, but when I enter the key it says the key is already in use. How can I fix it?

  I have Windows Vista Ultimate 32 and 64 bit edition

  I bought Windows Vista Ultimate 32 and 64 in a box in 2008, I installed the 32 edition because at the time I was told not all software will work with the edition 64 a month ago, I decided to windows 7 Ultimate Via Amazon purchase which proved be a copy of the counterfeit money and Amazon me has now repaid , so what I do, well I could buy another copy of windows 7 Ultimate or I could give the other Version of windows that came in the same box with a product key a go, so I removed and formatted the hard drive and reinstalled 64 bit version on my drive using the product key original that I used on the 32-bit Edition for four years and when I try to register the 64 bits edition, that is to say someone else using this product key, you will have to buy another key or a copy of windows 7. Well, I decided to wait until Windows 8 will be released, that's why I decided to try the Vista 64 - bit Edition?

  Or better yet, I might switch to a Mac OS x system?

  The answer is not to buy Windows 7 from a dealer on the market of Amazon.  Stick to Amazon itself.  Amazon Marketplace is as eBay and other auction sites and online delivery.  It is composed of persons whose practices sales are questionable.  You won't get counterfeit product from Amazon itself.

  You have to solve the problem with Vista 64-bit using phone activation.

  Activate by phone.  http://TechNet.Microsoft.com/en-us/library/cc736912 (WS.10) .aspx

  Or click Start and type ' slui.exe 4.

  Do not answer all prompts automatic until it asks you if you want to speak to an agent.

  If you continue to have problems with activation, run the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool

  Once downloaded, run the tool. Click on the button continue, after a short time, continue button will change to a copy button. Click the copy button in the tool (ignore the error at this stage) and then paste (with r-click and paste or Ctrl + V) in your message.

• problems with vista and microsoft set 32-bit or 64-bit.

  try to solve the problems with vista and microsoft fix it.  This error code 0 x 800400154 came up saying that they finish their using 32 bit and I have a 64 bit what they say.

  What version of the operating system Windows am I running?

  Windows 32-bit or 64-bit

  What Microsoft FixIt you try to run?  (There are MANY of them - they are simply the written scripts that do the manual steps in the KB article for you).

• I have problems with Adobe Photoshop CS4 and Windows 7 32-bit Professiol.

  When I open an image of the bridge, the photoshop Panel is locked on one side of the screen.  The onle way I can get out of it is CTRL, alt, delete.  The problem persists.  I tried to uninstall Adobe and reinstall with no luck.  I called Adobe and they think that there is a problem with the security system in Windows.  Help, please.

  Hey jrcjr,

  This could be attributed to several factors such as conflicts between device drivers, applications, settings of operating system, hardware, and corrupt elements in specific files.

  Basic troubleshooting
  
  1. make sure that the computer meets the minimum requirements for Photoshop.
  2. install all Windows updates. .
  3 re-create the Photoshop preferences file.

  Re-create the Photoshop preferences file to eliminate problems that may cause a damaged Preferences file.

  To re-create the Photoshop preferences files:

  1. quit Photoshop.
  2. rename the \AppData\Roaming\Adobe\Adobe Photoshop CS4\Adobe Photoshop CS4 Settings\Adobe Photoshop CS4 Prefs.psp directory Users\ [username] Adobe Photoshop CS4 Prefs.old.
  3 launch Photoshop. Photoshop creates a new Adobe Photoshop CS4 Prefs.psp file.
  If the problem persists, the Photoshop preferences files aren't the cause. To restore custom settings, quit Photoshop, and then delete the new Adobe Photoshop CS4 Prefs.psp file and restore the original name of the previous Adobe Photoshop CS4 Prefs.psp file.
  
  4 restart Windows in a modified mode
  
  See this article for reference:
  
  Restart Windows in a modified mode (Windows 7 and Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404913.html

  5. create the new account administrator (Windows 7 and Vista)
  
  Refer to this article:
  
  Create a new local administrator account (Windows Vista)
  http://kb2.Adobe.com/CPS/404/kb404912.html

  If nothing helps, please contact the vendor of software for any help.

  For your reference:
  
  Fix system errors and freezes in Photoshop CS4 (Windows 7 and Vista)
  http://kb2.Adobe.com/CPS/404/kb404897.html

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Update BIOS on Satellite A300 with Vista 64-bit

  How can I update the Bios on a Satellite A300 with Vista 64 bit.

  There is only one available 32-bit update utility.

  So don t update the BIOS if the compatible version is not available.
  BIOS for Vista 32-bit is not compatible with Vista 64-bit!

  See you soon

• I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild.

  RESTORED FOR LAPTOP, WINDOWS VISTA INVAILD

  Hi I'm new to these fornums

  I restored my laptop Toshiba because I had some problems with it and now my Windows Vista computer is indicating that it is 'invaild...

  I have the product key on a sticker on the bottom of the laptop, but whenever I entered the code, I also get this:

  The product key you entered will not work with this edition of Vista

  I know that most people are trying to say to activate by phone, but this option is not available

  Help, please

  Now that you have found the key and the certificate of authenticity, you must change to the key on the COA sticker - ONLY then it will activate.

• Windows Vista 64-bit of Windows 7 32-bit update?

  G ' Day,.

  I've seen a lot of Windows Vista 32-bit to Windows 7 64 bit upgrade questions, but that the opposite?
  I just moved houses, and I think I lost my CD of 32-bit of Windows Vista, but I found my 64-bit of Windows Vista CD and I am wanting to buy Windows 7 Uprade but only to install the 32-bit version.

  You can do in the modernization of the place of Windows 64-bit to 32-bit Windows, and vice versa. Its a clean install only. I suggest that you use the Windows Easy Transfer utility included on the DVD of Windows 7 to create a backup your personal files.

  Andre Da Costa http://adacosta.spaces.live.com http://www.activewin.com

• Windows vista 32 bit. Windows Mail receives by e-mail at the start of the program, but when I press send/receive it does nothing more.

  Windows vista 32 bit.
  Windows Mail receives by e-mail at the start of the program, but when I press send/receive it does nothing more.
  Then when I mail windows startup that he gets all of my email, if I send an email to myself, it sends e-mail directly, but by hitting the send/receive button, it does nothing (it shows the Outbox send/receive and said that there are mistakes, but when you check the error tab, it showed no errors). If I close windows mail and that he again, the email is received.  I put it to automatically receive by email after 10 minutes, even there, receiving nothing. I have not any virusscanner, it's a clean install with windows vista 32-bit, and configured the windows Messaging. Got all the updates that are available from Ms.
  I import e-mail by using the import function.
  Someone at - it an idea?

  Greetz Koen

  Try this. You might have stuck messages even if they are not visible.

  How to remove an Undeletable Message stuck in Windows Mail
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  If this does not help, delete the account, restart and add it again.

• Suggestions for synchronization of the Z22 with Vista 64 bit?

  Hello world

  I know there are many positions related to this, but I'm still not clear on what I need to do, so I hope someone can help!

  I just bought a new laptop with Vista 64 bit, and I have a Palm Z22.  I know there is currently no drivers for Vista 64-bit, and my laptop does not seem have an infrared port, so here's my question: anyone had success synchronization a Z22 in any other way, and if so, how?  Any help would be appreciated!

  I am posting this probably a bit late, but for the benefit of anyone else who runs into this problem, I have had success using the IRDA to USB for Hotsync adapter a Z22 with a laptop under Vista 64.

  I use an old version of Palm Desktop and Hotsync software in 32-bit compatibility mode.  When I tried to do a Hotsync via the USB port, I discovered that there is no USB driver for 64-bit for the Palm handhelds.  Not at the time I write this, in any case (Nov. 2008).

  The only other option is IR for the Z22.  I found an adapter USB to IRDA model USB-1510 online.  The adapter comes with an extension cable USB for those who have a desktop PC or a USB located inconveniently on a laptop.

  As soon as I plugged the adapter to the USB port on the laptop the 64-bit for the adapter driver has been downloaded from the Windows Update site.

  I created Hotsync via infrared like I would on any other PC and it worked the first time.  The only problem is that if you start Hotsync by touching the permanent icon next to the writing area, he will always try to synchronize via USB, but I guess it's a matter of Palm Z22.  I have been using the icon on the main touch screen that always starts with an IR connection after the initial installation.

  If you have a different model, Bluetooth and Wi - Fi Hotsync seem to work for others.

• A problem with your video hardware caused Windows to stop working correctly.

  Description
  A problem with your video hardware caused Windows to stop working correctly.

  Signature of the problem
  Problem event name: LiveKernelEvent
  OS version: 6.0.6001.2.1.0.256.1
  Locale ID: 1033

  Files helping to describe the problem
  WD-20090325 - 1017.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 117
  BCP1: 84E10510
  BCP2: 8DA1F4B2
  BCP3: 00000000
  BCP4: 00000000
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 256_1

  Hello Neo22,

  Thank you for using the Microsoft Windows Vista Forums.

  When you receive this error?  Have you recently installed a new hardware?  Have you updated your drivers?  Please indicate any other information which could help identify it.  I've added a link specifically for the video material that could help.  Please let me know if you still encounter problems or if you have any other questions.

  http://windowshelp.Microsoft.com/Windows/en-us/help/648bead6-2e88-4B68-8771-d4358bdd8ab41033.mspx engineer in Support of James Microsoft answers visit our Microsoft answers feedback Forum and let us know what you think.

• Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB _ @_. _, Thank you

  Equipped with Vista 32-bit, lost sound and cannot install the Realtek-get code 800705 b 4, can anyone help, BB * address email is removed from the privacy *, thank you

  How does this relate to the features of Windows Update?

• Vista-64 bit for Windows 7 32 bit upgrade

  I have a computer I bought with Vista 64 bit OEM factory needs reinstalled operating system installed (my kids computer - trashed by viruses). I bought a copy of Windows 7 32 bit. The upgrade to Vista 64-bit to 32-bit windows 7 will be a problem with system drivers or a problem at all? Or should I buy Windows 7-64 bit? If so, can I get a credit or upgrade to the 32-bit version I've already spent money on?

  Hello

  ask whenever you bought windows 7 32-bit on a credit

  64-bit to 32-bit or 32-bit to 64-bit is not a upgrade path

  It must be done with a clean install with a final certificate of Windows 7

  Information of Windows 7:

  It depends on if the manufacturer of your computer/laptop has windows 7 drivers available for him as to if it will work properly

  check with them

  and read this

  Windows 7 upgrade advisor

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1b544e90-7659-4BD9-9e51-2497c146af15

  Windows 7 system requirements

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  Windows 7 upgrade paths

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  _____________________________________________________________

  and the link below is to an instance of installation of Windows 7 for any other questions about the installation of Windows 7

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install?page=1&tab=all

  __________________________________________________________________________________

  Here are the different ways to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  ____________________________________________________________

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  __________________________________________________________

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  ____________________________________________________________

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246