Problem with wireless on laptop HP 255 G2

Similar Questions

• Problems with wireless connection in Windows

  I've already updated my adapter wireless windows 7, but every time I have to leave the room where I placed my router... the connection is lost. may there is a problem with wireless my laptop range... Please help me I don't know much about this kind of things computer b. Please send me a direct link so that I can solve the problem
  OT: Network network adapter Ethernet NIC wireless networking device

  Hello

  Internet connection issues are more often caused by disconnected cables or by routers or modems that do not work correctly. I suggest you try the steps from the following link:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-in/Windows7/why-can-t-i-connect-to-the-Internet

• Y410 77578CQ problem with wireless drivers

  I have three Lenovo 3000 series Y410 laptop computers 77578CQ. These are delivered with only vista drivers. But I installed Windows XP on them and now I am facing problem with Wireless Card Drivers for Windows XP. I downloaded both the drivers listed on the Lenovo site for the Windows XP wireless network card, but both do not work. Someone help me because it is really a matter of concern to my office as we only use wireless network.

  
  

• Diagnostics Windows network, the error reads 'Problem with wireless adapter or access point' and fails to solve the problem.

  «Problem with access point or wireless adapter»

  Hi, I just bought a new laptop & I have the extreme difficulty to stay connected to the internet. When I run Windows Network Diagnostics, error reads 'Problem with wireless adapter or access point' and fails to solve the problem. Help, please... Thank you, Maria

  HI Maria,

  ·         What operating system is installed on your computer?

  ·         You have installed the latest drivers for wireless network card?

  Follow the suggestions below for a possible solution:

  Method 1: Start your computer in a clean boot state in order to check if the applications of third parties or startup items is the origin of the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: See these articles for solve wireless problems:

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

   

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Let us know if that helps.

• E4200 w 2 - re1000 and still have problems with wireless coverage

  I have a big enough House, 4500 square feet, and there a lot of bricks and stucko.  I wired ethernet ports in most of the rooms.

  For my Apple TV and tower PC, PS3, I used a wired connections.

  But we have a lot of devices without wireless, 4 laptops and 3 iphones, 3 ipads so good wireless coverage is a must.  I'm not looking for a budget solution, just the best solution that I can.  I also have a wireless baby monitor and an ATT Wireless TV receiver.  I have no end of problems with wireless on my devices.

  Without a lot of research I boght a couple re1000 thought that would be the solution to my problem, but they don't really work as well as I would like.  I wish I had done my research as I think that the right solution is to have the other AP in the connection from the House to a 'hand' AP via wired connection (connection wired bridge mode?).  I could adjust only force and channel to maximize coverage for the House.

  Here is what is a must:

  One SSID in the House

  Everything must be on the same network.  I have a wired camera Foscam and use the features of the homegroup in windows.

  Taking as a basis the e4200, what other should AP I buy to connect to the main via a wired connection?

  I don't know how to close your home is to other houses, so I don't know if you might encounter interference from 2.4 ghz to your neighbors or other sources.

  I see that WAP610 is not simultaneous... only selectable.  iPhones are only 2.4 ghz

  Whatever it is, you can keep the same SSID for your entire network, but you may need to use different wireless channels.  Everything meets your criteria above.

  The only unknown is your neighbors (and other sources) Wireless interference.

  You can download inSSIDer, which will give you a better idea of what you're against, but it is not infallible.

  http://www.MetaGeek.NET/products/inSSIDer/

• Unable to connect to Wi - Fi network - 'problem with wireless adapter or access point '.

  When I try to connect to the network Wi - Fi Home I get error like:- Windows cannot connect.

  When I click on solve problems I see error below :-'problem with wireless adapter or access point '.

  We reinstalled OS

  We rested the router

  We are able to connect to Wi - Fi in other laptops, notebook and mobile

  We have updated all the drivers of network also.

  Please help me solve the problem.

  Hi Niranjan,

  Thank you for your support. In fact, the problem is with the Router Configuration, because with any other router device, we are able to connect to Wi - Fi in the laptop.

  Thank you

• Problem with my Acer laptop does not connect to my home network.

  Hello

  I had a problem with my laptop. The laptop does not connect to my home network.

  I found the wireless network, but when I hit enter after entering the password (), suddenly a pop up come that said "Windows could not connect to the network". The laptop connects well with portable hotspot in my phone (3 G Tethering). But my phone (Samsung Galaxy Pocket) connects to the home network.

  My specs:

  Acer Aspire 4250 ongoing Windows 7 SP1.

  Dlink DSL-2730u (secure wifi with WEP 128 bit key)

  Please solve my problem...

  Original title: problems with my Acer laptop

  Guess - encryption levels are the same. E.g. is your set of router that you use WEP only but your PC configured to use WPA only? http://Windows.Microsoft.com/en-HK/Windows7/set-up-a-security-key-for-a-wireless-network

  If this is the case try to configure WPA2 or WPA rather than fall to WEP.

  Check all the other related settings as well. knowledge is the router using MAC filtering, are there available IP address so that it can allocate? (some routers are possible to limit the amount of IP address, they can allocate at one time).

  Second, if it does not remove the encryption all and see if it connects then. JUST AS a TEST, do not leave it.

• Wireless stopped working, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.

  My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services.  I've tried everything and my router is intact.  My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.

  original title: Wireless not working not

  Hello

  1 have had any changes made on the computer before the show?

  2. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• Unable to connect to wireless internet with error message: "problem with wireless adapter or access point.

  Original title: I am trying to connect to my WiFi.

  I am trying to connect to my wifi but it keep saying there is a "problem with wireless adapter or access point. I tried the steps that he told me to do but still no help.

  Hello

  Thanks for posting your question in the community of Microsoft Windows. I understand that you are facing problems with your wireless internet connection. Correct me if I'm wrong.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  To help you suggest several steps to solve the problem, I would appreciate it if you could answer the following questions:

  1 have you ever done any recent hardware or exchange of software on your computer before the show?

  2. What is the brand and model of the computer?

  Method 1:

  Follow the steps in the link below.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Follow the steps in the link below.

  Using the troubleshooter from network in Windows 7:

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 3:

  Follow the steps in the link below.

  How can I troubleshoot network card? :

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

• Problems with wireless mouse when laptop computer HDMI is connected to a TV

  I have a HP Pavilion G series laptop PC, when I connect to the TV using the VGA interface I have no problem, when I connect to the TV via the HDMI so I have the problem. I use a Microsoft 2.4 ghz wireless mouse, laptop connected to an electrical outlet, new batteries in the mouse, if I move the mouse more than 1 foot of the tower top it becomes useless, erratic, moves 6 inches at a time, or not at all, totally out of control. The laptop is about 2 feet from the TV due to the length of the HDMI cable, and I am sitting about 12 feet out in front of the TV with the mouse. As I know, no problem if I find the mouse in 1 foot from the laptop and no problems even at 12 feet awy using the VGA interface. Production of mouse says that the mouse has a range of more than 20 feet. Someone has an idea of what might happen? Last note, I also lookes to the use of the processor at the time and it is only 8%. The mouse model number is 3500.

  Hello said,

  Thanks for the reply.  I'm glad that you were able to solve the problem by replacing the mouse.

  Good luck!

• Tired of the problems with wireless in El Capitan

  Now before I type this I had the same EXACT issues with my Macbook Air and now they produce 11 "on my 15" Macbook Pro retina, material, it's an operating system is not matter because wireless worked well on Snow Leopard then began to occurring on the Mavericks and continued on El Capitan.

  The wireless on my Macbook Pro constantly cutting... it shows as connected, but then you lose the ability to connect to Web sites, email, etc... and the only way to bring it back is to turn wireless off and on.  If it gets too bad then I do the old SCM controller reset (turn off laptop, then shift + ctrl + option + power for five seconds, then power up) which solves the problem for a day or two and then it happens all over again.  My other devices (iPhone, iPad) do not have this problem and are always connected wirelessly without a problem.

  As I said I had the same issues on my Macbook Air and thought that maybe the Macbook Pro would be different, but obviously it has not been remedied in the Mavericks or El Capitan.  I certainly hope that Sierra solves this problem once and for all because I know there are a lot of other people in the same boat I am.  I love my Mac, and you saw my arm for me to get a Windows laptop.

  Bettier not to expect an upgrade of the operating system to solve a common problem. I'm not having problems with a Wi - Fi on El Capitan.

  If you have not yet tried, restart your modem router and internet Wi - Fi, and then restart your Mac (s) to test.

  If this does not help, it may be that network preferences are corrupted.

  Open the Finder. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  / Library/Preferences/SystemConfiguration

  Click OK, and then move all files in the SystemConfiguration folder to the trash.

  Restart your Mac. See if that makes a difference.

  Your Mac will generate a new SystemConfiguration folder for you.

• Strange problem with wireless MAC

  I think I have a rather unusual question.

  The problem is that my Macbook Pro (osx Lion) is not able to access my Photosmart B109n wireless. I can only connect via the usb cable. I share the printer with two other laptop users (windows), but they are able to connect wirelessly. I have reinstalled the driver several times and tried to install the network configuration again and again but nothing works. This problem exists already for a long time, also until I upgraded to Lion.

  I am convinced that the problem is not due to my router. At school, I'm not able to use the HP color LaserJet as well and I can only print via ethernet. In other words, there is something wrong with my mac. Seriously, I don't know what it could be.

  Our "home network" is called "Fitz". Whenever I try to install the network printer configuration, the printer asks the key network and attempts to connect to "Fitz". Whenever the printer is able to connect to the network. After that, the config. Assistant told me that I can remove the usb cable to continue the installation. Then the problem happens. At the moment I have remove the usb cable, the laptop immediately tells me that it is not able to connect to the printer, because I am not connected to "Fitz" (I'm always) and I can only use the wireless printer if I am connected to "Fitz".

  Reset the print/fax list no longer works!
  
  Please please can someone help me? Thank you!

  Nevermind, I was able to solve the problem today!

  All I had to do was pick "Shared printer on the network" check box in the printer preferences. Gosh, if I had known this before... I was not able to print wireless for 5 months. Makes me so stupid.

• Satellite Pro A100 - problems with wireless lan networks

  Hey all,.

  I have a problem with my laptop. It is able to connect to a wireless lan network, but is not able to properly - use this conection means: he do not get connection to Web sites or download data...
  I already have the latest drivers, but it's not helping...
  You have an idea? Could this be a problem with my wireless LAN card? What can I do?

  Thanks in advance

  DOM

  Have you tried a BIOS update?
  This you will find also on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com

  You have disabled all the security features for testing?
  I mean hidden SSID, MAC address filtering and so far. Maybe that's the problem.

  Check also if the router has the new firmware. You can find it on the site of the factory

• Problem with wireless connection with Satellite U500

  Hello
  Three months ago, I bought a Toshiba laptop Satellite U-500 (Windows Vista). I have a problem with the wireless connection - sometimes, it does not work and I have to restart pressing F8 and repair, then the connection is re-established; If I put into hibernation the connection is intact, but after a stop the problem maybe redo surface after the 2nd or 3rd session.

  I tried to format it, but it worked only for a while. The 2nd item in network adapters in the device (Realtek RTL8192E Wireless LAN 802.11n PCI-E NIC) Manager shows a yellow exclamation point. The message is this:
  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)
  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  Could you please help. I have sky broadband and am currently connected via the ethernet cable.

  Thank you
  Fauzan

  For 32-bit Vista go here [http://uk.computers.toshiba-europe.com/innovation/vista_drivers.jsp?macId=&LNG=1&mode=allMachines&us erOS = & action = search & SelCategorie = 2 & selFamily = 2 & salts Eries = 198 & selProduct = 855 & selShortMod = 1 & selOS = 26 & selType = all & country = 8 & language = 13 & searc h =] and download and then run the wireless LAN driver. That should clear the «!» If it isn't you can also find the vista driver at [http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=9&PFid=9&Level=6& Conn = 5 & DownTypeID = 3 & GetDown = false & downloads = true #R TL8192E]

• problem with wireless portable printer

  Windows 8

  HP Laserjet 200 color M251

  I had this set up works correctly (I forgot how I did it), until we have had an interruption in the internet service last night.  Today, the display on the printer itself says its connected.  My laptop displays this PCL6 printer class driver.  I can't print anything.  Everytime I try, it is said that my impression is offline.  I checked the printer itself, and it says it is connected and online.

  Can someone please?

  Hey @Bionic1 ,

  Welcome to the HP Forums!

  I understand that you are having printing problem with your printer LaserJet M251.

  Can you tell me what operating system you are using? What version of Windows you are using, click here: Windows operating system am I running?

  You should be able to see the IP address of the printer by pressing the button on the main screen of the printer wireless. This should be at the top of the screen, then left to right. Once you have the IP address (should be something like 192.168.1.2), type it into the web browser address bar (as you would for a Web site) and try to load the page. This should open an information page for your printer, and is called a built-in Web server.

  If this page does not load, there is no wireless communication. If it does, it indicates that the wireless connection is probably fine, but unfortunately this is not always the case.

  Try powercycling your router to update the communication. Do this by unplugging the power cord from the router and leave it unplugged for at least 45 seconds. Plug back in and wait 1-2 minutes so he can come back online. At this point, try to print.

  If this fails, try to add the printer with the full functionality driver instead of the class driver. Open devices and printers, and right-click on the printer. You should have the ability to delete or remove the printer. Once it's done download and run this installation program: color HP LaserJet Pro 200 M251 series full feature software and drivers.

  Let me know if this helps.